Answer:
[tex]\frac{dI}{dt} = 2.59\ x\ 10^4\ A/s[/tex]
Explanation:
First, we will calculate the inductance of the solenoid by using the following formula:
[tex]L = \frac{\mu_o AN^2}{l}[/tex]
where,
L = self-inductance of solenoid = ?
μ₀ = permeability of free space = 4π x 10⁻⁷ N/A²
A = Cross-sectional area = 30 cm² = 3 x 10⁻³ m²
N = No. of turns = 2000
l = length = 65 cm = 0.65 m
Therefore,
[tex]L = \frac{(4\pi\ x\ 10^{-7}\ N/A^2)(3\ x\ 10^{-3}\ m^2)(2000)^2}{0.65\ m}\\\\L = 0.0232\ H[/tex]
Now, we will use Faraday's law to calculate the rate of change of current:
[tex]emf = L\frac{dI}{dt}\\\\ \frac{dI}{dt} =\frac{emf}{L} \\\\ \frac{dI}{dt} =\frac{600\ V}{0.0232\ H}\\\\ \frac{dI}{dt} = 2.59\ x\ 10^4\ A/s[/tex]
On a distance-time graph, what is shown when the curve is flat going from left to the right?
A. a negative speed
B. no speed
C. a positive speed
D. It does not mean anything.
Please help me !!im on a test
Shadow is formed when an_____
object comes in the
way
of light.
Answer:
shadow is formed when an opaque object comes on path of light shadows are formed because light travels in a straight line and it can't pass through an opaque object
Answer:
Opaque object
Explanation:
Shadow forms when an opaque object comes in the way of light. Because opaque objects does not allow light to pass through them and light travels in a straight line. Hence a retreating figure of the same opaque object ,forms and it's black in colour without any detail just outline.
A 34-kg child runs with a speed of 2.8 m/s tangential to the rim of a stationary merrygo-round. The merry-go-round has a momentum of inertia of 510 kg*m2 and a radius of 2.31 m. When the child jumps onto the merry-go-round, the entire system begins to rotate. What is the angular speed of the system
Answer: [tex]0.43\ rad/s[/tex]
Explanation:
Given
Mass of child [tex]m=34\ kg[/tex]
speed of child is [tex]v=2.8\ m/s[/tex]
Moment of inertia of merry go round is [tex]I=510\ kg.m^2[/tex]
radius [tex]r=2.31\ m[/tex]
Conserving the angular momentum
[tex]\Rightarrow mvr=I\omega \\\Rightarrow 34\times 2.8\times 2.31=510\times \omega\\\\\Rightarrow \omega=\dfrac{219.912}{510}\\\Rightarrow \omega=0.43\ rad/s[/tex]
Please select the word from the list that best fits the definition
location of most volcanoes
Island arc
Lava
Basalt
Magma
Hotspot
Plate boundaries
Answer:
The answer is E., or "Plate Boundaries".
The word best describes the definition of the location of volcanoes is "plate boundaries". Therefore, option (E) is correct.
What are plate boundaries?The lithosphere is broken into tectonic plates that undergo some large motions and the boundary regions between plates are called plate boundaries. Based on their motions there are three kinds of plate boundaries: divergent, convergent, and transform.
Divergent boundaries are moving away from one another and separate, they form a rift. As the gap widens, the underlying layer may be soft for molten lava underneath to push upward and resulting in the formation of volcanic islands.
Convergent boundaries move towards one another and collide, subduction usually takes place. The denser plate goes underneath the less dense one and the plate boundaries also experience buckling.
Transform boundaries slide alongside one another and are exposed to huge amounts of stress and strain and are momentarily held in place. The two plates succeed in moving with respect to one another and cause earthquakes.
Learn more about plate boundaries, here:
https://brainly.com/question/18256552
#SPJ5
Highlight the letter of each sentence that is true about a geocentric model.
Earth is stationary at the center
Objects in the sky move around Earth
The sun is the center of the solar system
The planets revolve around the sun
Answer:
The sun is the center of the solar system.
The planets revolve around the sun.
con 110
Which classification or category would tennis belong to?
A. Target
B. Striking/Fielding
C. Net/Wall
D. Invasion
Answer:
C
Explanation:
Tennis would belong to net wall games .
In the physics lab, a block of mass M slides down a frictionless incline from a height of 35cm. At the bottom of the incline it elastically strikes another block that is only one-half its mass. Find the velocity of block M at the bottom of the incline before the collision with the small block m.
Solution :
Given :
M = 0.35 kg
[tex]$m=\frac{M}{2}=0.175 \ kg$[/tex]
Total mechanical energy = constant
or [tex]$K.E._{top}+P.E._{top} = K.E._{bottom}+P.E._{bottom}$[/tex]
But [tex]$K.E._{top} = 0$[/tex] and [tex]$P.E._{bottom} = 0$[/tex]
Therefore, potential energy at the top = kinetic energy at the bottom
[tex]$\Rightarrow mgh = \frac{1}{2}mv^2$[/tex]
[tex]$\Rightarrow v = \sqrt{2gh}$[/tex]
[tex]$=\sqrt{2 \times 9.8 \times 0.35}$[/tex] (h = 35 cm = 0.35 m)
= 2.62 m/s
It is the velocity of M just before collision of 'm' at the bottom.
We know that in elastic collision velocity after collision is given by :
[tex]$v_1=\frac{m_1-m_2}{m_1+m_2}v_1+ \frac{2m_2v_2}{m_1+m_2}$[/tex]
here, [tex]$m_1=M, m_2 = m, v_1 = 2.62 m/s, v_2 = 0$[/tex]
∴ [tex]$v_1=\frac{0.35-0.175}{0.5250}+\frac{2 \times 0.175 \times 0}{0.525}[/tex]
[tex]$=\frac{0.175}{0.525}+0$[/tex]
= 0.33 m/s
Therefore, velocity after the collision of mass M = 0.33 m/s
What does the if statement in a macro do?
It changes the data type of the macro based on the results of a query.
It attaches the macro to a query or report prior to printing to make it readable.
It creates a control in a form and connects the macro to the control’s event property.
It defines a criterion that evaluates to true or false and specifies actions to take if it is true.
Answer:
It defines a criterion that evaluates to true or false and specifies actions to take if it is true.
Explanation:
EDGE2020
Answer:
D
Explanation:
What's the difference between heat and temperature?
Answer:
Heat is the transfer of thermal energy between molecules within a system and is measured in Joules (J). It measures how energy moves or flows. Temperature is the average kinetic energy of molecules within a material or system and is measured in Celcius (°C), Kelvin (K), Fahrenheit (°F), or Rankine (R).
Joe first focuses his attention (and his eyes) on the tree. The focal length of the cornea-lens system in his eye must be __________ the distance between the front and back of his eye. View Available Hint(s) Joe first focuses his attention (and his eyes) on the tree. The focal length of the cornea-lens system in his eye must be __________ the distance between the front and back of his eye. greater than less than equal to
Answer: The focal length of the cornea-lens system in his eye must be LESS THAN the distance between the front and back of his eye.
Explanation:
The human eye the front part of the eye is the CORNEA. This is the tough white transparent part of the eye that helps in the refraction of light rays. While the backside of the eye is the RETINA. This is the part of the eye when images are focused.
When a normal eye is at rest, parallel rays from a distant object are focused on the retina. The ability of the eye - lens to focus points at different distances on the retina is known as accomodation. The adjustment of the eye lens to focus objects of varying distances is brought about by the ciliary muscles. The have the ability to change the shape of the eye which leads to change in focal length.
When a person with normal vision looks at a distant object at infinity, the lens brings parallel rays to focus on the retina. Thus, the furthest point which the eye can see distinctly is called the far point of the eye and it's infinity for a normal eye. But Joe was able to focus his eye on the tree, meaning that the tree was within his near point. This is the nearest point at which an object is clearly seen. Therefore, when the effective focal length of the cornea-lens system changes, it changes the location of the image of any object in one's field of view.
what unit is used to measure resistance
Answer:
Ohms
Explanation:
The unit of resistance is ohms.
If at a particular instant and at a certain point in space the electric field is in the x-direction and has a magnitude of 5.00 V/mV/m, what is the magnitude of the magnetic field of the wave at this same point in space and instant in time
Answer:
the magnitude of the magnetic field of the wave is 16.7 nT
Explanation:
Given the data in the question;
Electric field E = 5.00 V/m
we know that the expression for the electric field of an electromagnetic wave in terms if magnetic field is;
E = cB
where c is the speed of light ( 3 × 10⁸ m/s )
and B is the magnetic field
so we solve for the magnetic field
B = E / c
we substitute in the value of E and c
B = (5.00 V/m) / (3 × 10⁸ m/s)
B = 1.67 × 10⁻⁸ T
B = 1.67 × 10⁻⁸ T [tex]( \frac{1nT}{10^{-9}T} )[/tex]
B = 16.7 nT
Therefore, the magnitude of the magnetic field of the wave is 16.7 nT
What cycle moves carbon from one part of the Earth to another
Answer:
The cycle that moves carbon from one part of the Earth to another is called the carbon cycle.
Explanation:
The carbon cycle describes the process in which carbon atoms continually travel from the atmosphere to the Earth and then back into the atmosphere. Since our planet and its atmosphere form a closed environment, the amount of carbon in this system does not change. Where the carbon is located — in the atmosphere or on Earth — is constantly in flux.
On Earth, most carbon is stored in rocks and sediments, while the rest is located in the ocean, atmosphere, and in living organisms. These are the reservoirs, or sinks, through which carbon cycles. Carbon is released back into the atmosphere when organisms die, volcanoes erupt, fires blaze, fossil fuels are burned, and through a variety of other mechanisms. In the case of the ocean, carbon is continually exchanged between the ocean’s surface waters and the atmosphere, or is stored for long periods of time in the ocean depths.
Humans play a major role in the carbon cycle through activities such as the burning of fossil fuels or land development. As a result, the amount of carbon dioxide in the atmosphere is rapidly rising; it is already considerably greater than at any time in the last 800,000 years.
If you dropped a ball off the roof, and could neglect air resistance, the impact velocity of the ball on the sidewalk would be 102 miles per hour [mph]. Calculate the height of the building in units of feet.
Answer:
h = 105.98 m
Explanation:
We will use the third equation of motion here:
[tex]2gh= v_f^2-v_i^2[/tex]
where,
g = acceleration due to gravity = 9.81 m/s²
h = height = ?
vf = final speed = (102 mi/h)(1 h/3600 s)(1609.34 m/1 mi) = 45.6 m/s
vi = initial speed = 0 m/s
Therefore,
[tex]2(9.81\ m/s^2)h = (45.6\ m/s)^2-(0\ m/s)^2\\\\h = \frac{ (45.6\ m/s)^2}{2(9.81\ m/s^2)}[/tex]
h = 105.98 m
EMERGENT please answer
Answer:
meaning i dont know sorry
i love u whoosever seeing my question
Se transmiten ondas transversales en una cuerda tensada orientada sobre el eje x. La función de ondas correspondientes es y= 5.00 sen(6.05x + 5.19t + 1.57). Donde y y x están en metros y t en segundos. Cual es la rapidez de las ondas que se transmiten en dicha cuerda?
Answer:
Explanation:
Whats the entire question?
A certain object is subject to two forces: a 10-N force straight up and a 10-N force straight down. A student states that since both forces are in the vertical direction, the object cannot be moving horizontally. Why is this an incorrect conclusion?
A.
The vertical forces are balanced.
B.
Vertical net forces can cause horizontal motion.
C.
A horizontal force is not required for horizontal movement.
D.
Two vertical forces can combine to form a horizontal resultant force.
Answer:
C. Consider projectile motion. If an object starts out at some angle and only vertical forces (gravity) are present, the horizontal speed remains constant thruout the motion.
HELPPP WILL MARK BRAINLIST What type of image is formed by a lens if m= 2.7?
A. The image is smaller than the object and is virtual.
B. The image is smaller than the object and is real.
C. The image is larger than the object and is real.
D. The image is larger than the object and is virtual.
Answer:
the answer is C
Explanation:
So, the formed image will be real and inverted.
If the frequency of a light wave is doubled, what happens to the wavelength of the wave?
Answer:
If the frequency is doubled, the wavelength is only half as long. 3. ... As the frequency slows down, the wavelength increases.
The formula length x width x height is used to calculate the volume of a type of
A
gas.
B
solid.
C
liquid.
D
plasma.
Answer:
D
Explanation:
egwfefeewfwvebefhbdhahwuw
what is the difference between kinetic and potential energy
Answer:
Kinetic energy is energy possessed by a body by virtue of its movement. Potential energy is the energy possessed by a body by virtue of its position or state. While kinetic energy of an object is relative to the state of other objects in its environment, potential energy is completely independent of its environment. Hence the acceleration of an object is not evident in the movement of one object, where other objects in the same environment are also in motion. For example, a bullet whizzing past a person who is standing possesses kinetic energy, but the bullet has no kinetic energy with respect to a train moving alongside.
I think this answer is helped you
Answer:
the what state does alduos is 500 stack of ml tayo the little man ♂️ jajao
kalokoha ya
ansjsjdk
The table provided shows the masses and volumes of four liquids. A student has a mystery liquid with a density of 3 g/mL. Which liquid does the student have?
Liquid 1
Liquid 2
Liquid 3
Liquid 4
Answer: Liquid 2, if it's 3 g/mL and liquid 2 has 6gs and 2 mLs than it's 3g/mL
A p-n junction diode is, as the name suggests, an electronic device that is made up of a p-type semiconductor and an n-type semiconductor joined together.
a. True
b. False
Answer:
a. True
Explanation:
When a p-type semiconductor is placed adjacent to an n-type semiconductor the common plane thus formed is termed as P-N Junction or P-N Junction Diode.
The diode is formed by melting both p-type and n-type semiconductors through a special manufacturing process called "Thermo-Compression Proces".
The P-N junction has a property of one-way conduction. It means it only allows the current to pass through it in one direction and the current flow is practically zero in the other direction. Thus, it can act as a diode. The p-side acts as the anode, while the n-side acts as the cathode.
Hence, the correct option is:
a. True
An ocean thermal energy conversion system is being proposed for electric power generation. Such a system is based on the standard power cycle for which the working fluid is evaporated, passed through a turbine, and subsequently condensed. The system is to be used in very special locations for which the oceanic water temperature near the surface is approximately 300 K, while the temperature at reasonable depths is approximately 280 K. The warmer water is
Answer:
Explanation:
Dear Student, this question is incomplete, and to attempt this question, we have attached the complete copy of the question in the image below. Please, Kindly refer to it when going through the solution to the question.
To objective is to find the:
(i) required heat exchanger area.
(ii) flow rate to be maintained in the evaporator.
Given that:
water temperature = 300 K
At a reasonable depth, the water is cold and its temperature = 280 K
The power output W = 2 MW
Efficiency [tex]\zeta[/tex] = 3%
where;
[tex]\zeta = \dfrac{W_{out}}{Q_{supplied }}[/tex]
[tex]Q_{supplied } = \dfrac{2}{0.03} \ MW[/tex]
[tex]Q_{supplied } = 66.66 \ MW[/tex]
However, from the evaporator, the heat transfer Q can be determined by using the formula:
Q = UA(L MTD)
where;
[tex]LMTD = \dfrac{\Delta T_1 - \Delta T_2}{In (\dfrac{\Delta T_1}{\Delta T_2} )}[/tex]
Also;
[tex]\Delta T_1 = T_{h_{in}}- T_{c_{out}} \\ \\ \Delta T_1 = 300 -290 \\ \\ \Delta T_1 = 10 \ K[/tex]
[tex]\Delta T_2 = T_{h_{in}}- T_{c_{out}} \\ \\ \Delta T_2 = 292 -290 \\ \\ \Delta T_2 = 2\ K[/tex]
[tex]LMTD = \dfrac{10 -2}{In (\dfrac{10}{2} )}[/tex]
[tex]LMTD = \dfrac{8}{In (5)}[/tex]
LMTD = 4.97
Thus, the required heat exchanger area A is calculated by using the formula:
[tex]Q_H = UA (LMTD)[/tex]
where;
U = overall heat coefficient given as 1200 W/m².K
[tex]66.667 \times 10^6 = 1200 \times A \times 4.97 \\ \\ A= \dfrac{66.667 \times 10^6}{1200 \times 4.97} \\ \\ \mathbf{A = 11178.236 \ m^2}[/tex]
The mass flow rate:
[tex]Q_{H} = mC_p(T_{in} -T_{out} ) \\ \\ 66.667 \times 10^6= m \times 4.18 (300 -292) \\ \\ m = \dfrac{ 66.667 \times 10^6}{4.18 \times 8} \\ \\ \mathbf{m = 1993630.383 \ kg/s}[/tex]
Types of government
Answer:
Explanation:
The different types of government include a direct democracy, a representative democracy, socialism, communism, a monarchy, an oligarchy, and an autocracy
What is an appraisal of an employee's performance in the workplace?
A. consensus
B. evaluation
C. procedure
D. metacognition
Answer:
B. evaluation
Explanation:
An employee can be defined as an individual who is employed by an employer of labor to perform specific tasks, duties or functions in an organization.
Basically, an employee is saddled with the responsibility of providing specific services to the organization or company where he is currently employed while being paid a certain amount of money hourly, daily, weekly, or monthly depending on the contractual agreement between the two parties (employer and employee).
Hence, while an employer may be the owner of a business firm or company, an employee is a subordinate employed to provide unwavering services to the employer while also, being professional and diligent at all times.
Human resources management (HRM) can be defined as an art of managing, controlling and improving the number of people (employees or workers), functions, evaluation of employees, activities which are being used effectively and efficiently by an organization.
Hence, human resources managers are saddled with the responsibility of recruiting, evaluating, managing and improving the welfare and working conditions of the employees working in an organization.
Basically, the human resources manager carry out appraisals on the performance of the various employees working in an organization. These informations about employees are typically used for promotional purposes, allowances and other benefits or form of rewards.
With a thunderstorm brewing, an electric field of magnitude 2.0 × 102 newtons/coulomb exists at a certain point in the earth’s atmosphere. If an electron at that point has a charge of -1.6 × 10-19 coulombs, what is the magnitude of the force on the electron as a result of the electric field?
A.
2.0 × 10-6 newtons
B.
3.2 × 10-17 newtons
C.
5.8 × 105 newtons
D.
6.4 × 10-3 newtons
E.
1.7 × 104 newtons
Answer:
The correct option is (b).
Explanation:
Given that,
Electric field, [tex]E=2\times 10^2\ N/C[/tex]
We need to find the magnitude of the force on the electron as a result of the electric field.
We know that, the electric force is given by :
[tex]F=qE\\\\=1.6\times 10^{-19}\times 2\times 10^2\\\\F=3.2\times 10^{-17}\ N[/tex]
So, the required force on the electron is equal to [tex]3.2\times 10^{-17}\ N[/tex].
why do you think we cannot use a common fuel like diesel or gasoline for space travel ?
Answer:
Explanation:
it take oxygen in the atmosphere to burn it... in space there isn't any air :0
What is the magnification of a real image if the image is 15.0 cm from a lens and the object is 60.0 cm from the lens?
Answer:
soluble
Explanation:
Answer:
-0.25
Explanation: