(1) The gravitational potential energy of the bowling ball is 7,056 J.
(2)The potential energy and kinetic energy of the bowling ball are 2,205 J and 37.5 J respectively.
(3) The kinetic energy of the bowling ball is 450 J.
(4) The potential energy and kinetic energy of the child re 367.5 J and 67.5 J respectively.
What is the gravitational potential energy of the bowling ball?The gravitational potential energy of the bowling ball is calculated by applying the following formula;
P.E = mgh
where;
m is the mass of the objecth is the heightg is acceleration due to gravityP.E = ( 6kg x 9.8 m/s² x 120 m )
P.E = 7,056 J
(2) The potential energy and kinetic energy of the bowling ball is calculated as follows;
P.E = (3 x 9.8 x 75 )
P.E = 2,205 J
K.E = ¹/₂ mv²
K.E = ¹/₂ ( 3 ) x (5²)
K.E = 37.5 J
(3) The kinetic energy of the bowling ball is calculated as follows;
K.E = ¹/₂ mv²
K.E = ¹/₂ ( 4 ) x (15²)
K.E = 450 J
(4) The potential energy and kinetic energy of the child is calculated as follows;
P.E = (15 x 9.8 x 2.5 )
P.E = 367.5 J
K.E = ¹/₂ mv²
K.E = ¹/₂ ( 15 ) x (3²)
K.E = 67.5 J
Learn more about potential energy here: https://brainly.com/question/1242059
#SPJ1
A thin lens has a crescent shape, which is defined by two spherical surfaces A and B. The radius of the surface A is |RA| = 3a, and of surface B is |RB| = a. The lens is submerged in a medium.
What is the magnitude of the focal length |f | in the small angle approximation? Assume the index of refraction of the lens is 2.0 and of the medium is 1.0.
Light refraction in spherical lenses & the lens maker formula are the notions that should be applied to the problem at hand. Utilize the lens mfg rule to get the fov of fixed lens & it verify if it is a high or low length.
Why would someone use a spherical lens?A optical lens with such a contour that allows light beams to converge in diverge is called a spherical lens, also referred to as a singlet. One reason why spherical lenses are among the most popular ones is that they can project pictures onto the sensor with changing their aspect ratios.
What different spherical lens types are there?It's an optical apparatus that the light rays pass through to converge / diverge before communicating. Thus, convex or convergent lenses and concave or divergent lenses are the two main categories of spherical lenses.
To know more about spherical lens visit:
https://brainly.com/question/13089079
#SPJ4
a 6kg box is traveling at a speed of 10 m/s. suddenly it comes across a rough patch in the ground, which exerts a friction force of 40 n on the box. how far will the box go before it stops?
The box will go 7.5 meter before it stops.
What is speed?Speed is distance travelled by the object per unit time. Due to having no direction and only having magnitude, speed is a scalar quantity With SI unit meter/second.
Initial speed of the box = 10 m/s.
Final speed of the box = 0 m/s.
Deacceleration of the box = (40 ÷ 6) m/s² = (20/3) m/s²
Hence, distance travelled before it stops = u²/2a
= 10²/(2 ×20/3) m
= (100 × 3)/(2 × 20) m
= 7.5 m.
So, the box will go 7.5 meter before it stops.
Learn more about speed here:
https://brainly.com/question/28224010
#SPJ1
Create an expression for the direction of the cars average acceleration in terms of
The rate at which the velocity changes is referred to as average acceleration. To determine the average acceleration of anything, we divide the change in velocity by the amount of time that has passed.
What is acceleration?We refer to an object as accelerating when its velocity changes. As a result, acceleration is the rate at which a velocity changes over time. Acceleration is the common term used to describe an increase in speed.
For instance, the average acceleration of a crazy ball would be 20 cm/s/s if its velocity increased from 0 to 60 cm/s in 3 seconds. The marble's velocity will therefore rise by 20 cm/s per second as a result. You can better comprehend the operation by using the table below:
Note that an overview was given as the complete question wasn't found.
Learn more about acceleration on:
https://brainly.com/question/460763
#SPJ1
suppose you have a reaction vessel initially containing 13.5 moles of sulfur dioxide and 11.2 moles of oxygen.
When initially containing 13.5 moles of sulfur dioxide and 11.2 moles of oxygen, the remaining moles of O2 are 4.45 moles.
What is reaction?All forces occur in pairs, as described by the third of Newton's laws of motion in classical mechanics, so that if one object exerts a force on another, the second object exerts an equal and opposite reaction force on the first. A reaction force is the result of an opposite-direction action force. Newton's third law of motion addresses these two forces, referred to as action and reaction forces. Newton's third law states that there is an equal and opposite reaction to every action.
Here,
2 ℎ ℎ 11.2 O2=11.2*2=22.4 moles
mols of SO3 produced=13.5*2/2
13.5 mols
mols of O2 consumed=13.5*1/2
=6.75 mols
mols of O2 remaining=11.2-6.75
=4.45 mols of O2
The moles of O2 remaining is 4.45 moles when initially containing 13.5 moles of sulfur dioxide and 11.2 moles of oxygen.
To know more about reaction,
https://brainly.com/question/1071297
#SPJ4
Complete question:
When initially containing 13.5 moles of sulfur dioxide and 11.2 moles of oxygen, the remaining moles of O2 are 4.45 moles. What is reaction? What amount of oxygen is remaining?
Type the numerical answer only. No degree symbol or the word 'degree'. *
17. Find the m/B
Your answer
▸
A
75
B
No doorge symbol or the word 'degree'
C
Press Alt and 0176 on your keyboard. Please take note that this technique only functions on keyboard shortcut with a 10-key numeric pad.
What are keyboard shortcut?Using a keyboard shortcut, you can quickly insert the degree sign in Word documents if your keyboard has a number pad.To begin, position the cursor where you want the degree sign to appear on your page.After then, use your keyboard shortcut Alt+0176. Remember that while holding down the Alt key, you must enter the correct digits. To enter numbers instead of using the keys on your keyboard, use the numeric pad.Holding down the ALT key, type 0 1 7 6 on the numeric keypad of the keyboard. With NumLock turned on, enter 0176 with the leading zero. Hold down the NumLock key while starting to type the 0176 numbers if there isn't a numeric keypad.To learn more about keyboard shortcut from the given link
https://brainly.com/question/12531147
#SPJ1
How does Search, Setup, Smooth apply motorcycle
The concept of Search, Setup, and Smooth applies to motorcycle riding in the following way:
Search: This refers to the rider's ability to scan the road ahead and anticipate potential hazards, such as turns, traffic, and other obstacles. This is essential for safe riding as it allows the rider to make adjustments to their speed, position, and trajectory in advance.
Setup: This refers to the rider's body position and the setup of the motorcycle. This includes the rider's posture, the position of their feet on the pegs, and the position of their hands on the handlebars. A proper setup allows the rider to maintain stability and control of the motorcycle.
Smooth: This refers to the rider's ability to make smooth and controlled movements on the motorcycle. This includes smooth braking, accelerating, and turning. Smooth riding helps to maintain stability and control, and reduces the risk of accidents.
What is the concept about?The Search, Setup, and Smooth concept is a useful framework for thinking about motorcycle riding, as it highlights the importance of awareness, body position, and control in maintaining safety and stability on the road.
In summary, It emphasizes the rider's ability to anticipate hazards, maintain proper posture and motorcycle setup, and make smooth controlled movements.
Learn more about motorcycle from
https://brainly.com/question/28840082
#SPJ1
for problems asking for a sketch, be sure to label heights and times. show intermediate steps of your work.
The problems ask to find and plot z[n] = x[2–2n] using [tex]a^{u[n]}[/tex] the function, reconstruct a[n] using linear interpolation and time scaling transformations, and find no and ni such that [n] = p[n+ni) is odd and sketch x[n] for the signal p[n] = u[n+ 7] – u[n+ 3] – u[n + no] + u[n +2].
For the first problem, it is important to make sure that you label the heights and times in the sketch. This is important to ensure that when you are solving the problem, you are paying attention to the different points on the graph and how they interact with one another. To begin with, you can use a combination of transformations to find and plot z[n] = x [2–2n). It is possible to use a transformation like [tex]a^{u[n]}[/tex] where a > 1 to manipulate the x[n] into the desired shape.For the second problem, the signal x[n] and two series of time scaling transformations for x[n] are given below. In order to reconstruct a[n] with each series of transformations, you can use linear interpolation to calculate the interpolated values. You will also need to determine if both series of transformations are invertible or not. To do this, you can inspect the series and see if each transformation is reversible.Finally, for the third problem, in order to find no and nį such that [n] = p[n+ni) is odd, you can start by inspecting the signal p[n] = u[n+ 7] – u[n+ 3] – u[n + no] + u[n +2]. From here, you can then use algebraic manipulation to determine the no and nį. Once these are found, you can sketch x[n], which will be a step function.To learn more about transformations at
https://brainly.com/question/21303815?referrer=searchResults
#SPJ4
The question is -
For problems asking for a sketch, be sure to label heights and times. Show intermediate steps of your work. 1. Combinations of transformations: Let x[n] = a^u[n], where a > 1, find and plot z[n] = x [2–2n). 2. Example of noninvertible transformations: The signal x[n] and two series of time scaling transformations for x[n] are provided below. Try to reconstruct a[n] with each series of transformations. Are both series of transformations invertible? Use linear interpolation if you need to and write down the general formula for calculating the interpolated values. x[n] n -2 -1 0 1 2 3 4 5 5 x[3n] x/r/3] x[n/3] x[n] x[n] x[n/3] x[3n] x[n] x[n] 3. Even/Odd + Step Function: For the signal p[n] = u[n+ 7] – u[n+ 3] – u[n + no] + u[n +2], find no and nį such that [n] = p[n+ni) is odd and sketch x[n].
forty-five seconds after a bowl begins to leak, the bowl is losing 0.33 ounces of liquid per second. let l(t) represent the amount of liquid that has leaked at any given time, and let t be measured in seconds. which of the following expressions represents this scenario?
The expression that represents the scenario forty-five seconds after a bowl begins to leak, the bowl is losing 0.28 ounces of liquid per second would be l(t) = 0.28t.
When a bowl begins to leak, it can be represented mathematically as a function of time, l(t). In this case, the bowl is losing 0.28 ounces of liquid per second, so after 45 seconds, the total amount lost would be 0.28 x 45 = 12.6 ounces.
This function can be used to calculate the amount of liquid lost over any given amount of time, depending on the rate of the leak. It is important to note that this calculation only applies to liquids with a known rate of flow.
The bowl's liquid level over time can be represented by the expression l(t) = 0.28t. This expression calculates the amount of liquid lost from the bowl each second.
To learn more about liquid, click here:
https://brainly.com/question/752663
#SPJ4
Small spheres of diameter 1.05 mm fall through 20.0°C water with a terminal speed of 2.34 cm/s. Use 1.00 x 10-3 §a for the viscosity of water. Calculate the density of the spheres.
The density of the small spheres with a diameter of 1.05mm and a terminal velocity of 2.34 cm/s is 42.97m/s³.
What is Density?Density is a measurement which compares the amount of matter occupied by an object with its volume. An object with much matter in a certain amount of volume has high density. Whereas, an object with a little matter in the same amount of volume has a low density.
We know that density of water,
σ = 1.00 × 10⁻³ kg/m³ and coefficient of viscosity for water, η = 10⁻³ Pa.s
Given,
Terminal speed, v = 2.34 cm/s = 0.0234 m/s
Radius of sphere, r = d/2 = 1.05/2 = 0.525mm = 0.0005m
Using the formula of terminal speed,
v = 2(ρ − σ)gr²/ 9η
0.0234 = 2(ρ - 1.00 × 10⁻³) × 9.8 × 0.0005²/ 9 × 10⁻³
0.0234 = 2(ρ - 1.00 × 10⁻³) × 9.8 × 0.00000025/ 9 × 10⁻³
0.0234 = 2(ρ - 1.00 × 10⁻³) × 0.00000245/ 9 × 10⁻³
0.0234 × 9 × 10⁻³/ 2 × 0.00000245 = ρ - 1.00 × 10⁻³
0.2106× 10⁻³/ 0.0000049 = ρ - 1.00 × 10⁻³
0.0002106/ 0.0000049 = ρ - 1.00 × 10⁻³
42.97 = ρ - 1.00 × 10⁻³
ρ = 42.97m/s³
Therefore, the density of the small spheres is 42.97m/s³.
Learn more about Density here:
https://brainly.com/question/29775886
#SPJ1
two tanks are participating in a battle simulation. tank a is at point (385, 870, 567) and tank b is positioned at point (795, 625, 597).two tanks are positioned on opposite corners of a piece of uneven terrain.(a)find parametric equations for the line of sight between the tanks. (use the parameter t.)(x(t), y(t), z(t))
The parametric equation for the line of sight between the tanks can be represented as: x(t) = 385 + 410t, y(t) = 870 - 245t, z(t) = 567 + 30t
The line of sight between two points can be represented as a vector that starts at one point and ends at the other point. To find the parametric equation of the line of sight, we can subtract the starting point from the ending point to find the direction vector and then add it to a starting point multiplied by the parameter 't'.
Given that tank A is positioned at point (385, 870, 567) and tank B is positioned at point (795, 625, 597), the direction vector can be calculated as follows:
(795, 625, 597) - (385, 870, 567) = (410, -245, 30)
x(t) = 385 + 410t,
y(t) = 870 - 245t
z(t) = 567 + 30t
The parameter 't' can have any real value and determines the position along the line of sight.
To know more about parametric equation, here
https://brainly.com/question/29145287
#SPJ4
water parks often include a log rolling area, in which participants try to stay upright while balancing on top of floating logs that are free to rotate in the water. if you've tried this, you know that the larger the diameter of the log, the easier it is to balance on top. (figure 1)
Buoyancy Force is the reason for the larger the diameter as the Larger the diameter larger the volume of log rolling and the higher the Buoyancy force which leads to floating the participants.
The floating of any dogy depends upon the Buoyancy force that the body is having or we can say the force which is applied on the water's surface to float on it. And However, Buoyancy depends on three things.
1. Gravitational pull(g)- the force applied by the planet to pull/attract ant mass towards itself. in the case of the earth, it is fixed which is 9.8 ms^-2.
2. The density(p)- It is the mass per volume of any liquid In the case of distilled water it is 997 kg/m³. It may barry for ocean water.
3. Volumn of the body(v)- It is the volume of the body which is floating on water.
So fb = g*p*v where fb( Buoyancy force) is directly proportional to the volume of the body.
So the Greater the volume of the body higher it will float.
Learn More about Buoyancy: https://brainly.com/question/28464280
#SPJ4
True /False. An independent voltage source always keeps the potential difference between its terminal equal to its nominal voltage
False. An independent voltage source is a two-terminal device that can maintain a fixed potential difference between its terminals, but it does not necessarily keep the potential difference equal to its nominal voltage.
What is nominal voltage?Nominal voltage is an electrical term used to describe the average, or expected, voltage of an electric circuit. It is typically used as a reference point for other measurements. Nominal voltage is typically defined as the voltage that is expected to be available under normal operating conditions, and it is often used to indicate the voltage that is desired for a particular device or system. Nominal voltage is typically specified as a range, with the lower end of the range representing the minimum acceptable voltage and the higher end of the range representing the maximum acceptable voltage.
To learn more about nominal voltage
https://brainly.com/question/26242109
#SPJ4
using the information listed in the description, which type of spring do you choose to most closely reach the targeted launch speed of 12.6 m/s? show your work and explain your answer using what you know of kinetic energy, elastic potential energy, and conservation of energy
A linear spring with a spring constant of 77.2 N/m would be the best choice to most closely reach the targeted launch speed of 12.6 m/s.
To calculate the spring constant needed to reach the target launch speed, and determine the elastic potential energy stored in the spring. This is equal to the spring constant multiplied by the square of the displacement of the spring E = 1/2 kx². We then use this value to calculate the kinetic energy of the object at launch KE = 1/2 mv². Finally, we can use the conservation of energy to solve for the spring constant k = 2(KE)/x².
In this problem, the mass of the object is 1 kg. The target launch speed is 12.6m/s. Putting these values into the equation above, we can calculate the spring constant needed to reach the target launch speed,
k = 2(1/2 (1) (12.6²)) / (1²)
k = 77.2 N/m
To know more about springs:
https://brainly.com/question/30294382
#SPJ4
electrical flow of current occurs when a person or conduction object bridges gap between live conductors and the ground or between live conductors.
The given statement is true.
Current electricity is defined as the flow of electrons from one section of the circuit to another. It is a medium that provides a very convenient means for transferring energy from one place to another. Correctly used, electricity is our most versatile form of energy. Control of most electrical hazards is neither difficult or expensive, but ignoring them can cause serious consequences.Flow of current occurs when a person or a conducting object bridges the gap between live conductors and the ground or between live conductors. This action causes current to flow.This is the reasoning behind birds on high voltage wires and why they do not fry. Since the bird is only on the wire there is no conduction between ground or other live conductors. However, if I go to trim my trees and touch the wires or place my ladder on the wires, I have bridged the gap between the live conductor and the ground. Current flows from the line through my body and gets discharged into the ground.To know more about electricity visit:
https://brainly.com/question/14681756
#SPJ4
When the volume of a gas is decreased at constant temperature the pressure increases because the moleculesO Strike unit area of the walls of the container more oftenO Strike the unit area of the walls of the container with giher speedO Strike the unit area of the wall of the container with lesser speedO Move with more kinetic energy
When the volume of a gas is decreased at a constant temperature the pressure increases because the molecules a. Strike the unit area of the walls of the container more often.
We need to keep in mind that the kinetic energy or Speed of molecules of ideal gases depends on upon temperature and as the temperature increases the Kinetic energy of molecules increases.
So at constant pressure, the rest of the reasons(Options) mentioned can not increase.
Let's take an example of a small area on the surface or wall of the container. earlier when the volume was large, it had a lower probability of being hit by a molecule but now space is small, so it will be hit by more molecules so, high pressure will be generated on this area.
which results in pressure increases.
Learn More pressure of gases: https://brainly.com/question/25736513
#SPJ4
1. This spiral wishing well is a great way to demonstrate a gravity field. Explain how the well is a good representation of a gravitational field AND how it is an incorrect representation of a gravitational field.
2. Imagine a proton (mass = 1.67 x 10-27 kg) and an electron (mass = 9.11 x10-31 kg) are moving up this page at the same speed, side by side. At some point in their travels, they run into an electric field that is pointed to the right. What happens to the paths of the proton and electron when they enter this field? Will the proton be moving faster or the electron?
3. Halley’s Comet will be visible from the Earth again in 2062. This comet is famous for it’s beautiful tail and easy visibility from Earth. Explain using Einstein’s explanation of Gravity why the comet only appears every 76 years.
4.Other than the examples listed in the previous questions, where else have you come across the topics we have discussed in class this week? Be specific!
Explanation:
A spiral wishing well can be a good representation of a gravitational field in the sense that it demonstrates how objects are attracted to a central point, which is similar to how objects are attracted to a massive object in a gravitational field. The well also shows how the force of gravity increases as objects get closer to the center, which is consistent with the inverse square law of gravity. However, the well is an incorrect representation of a gravitational field in the sense that it is not a three-dimensional representation of the field, but rather a two-dimensional representation. Additionally, the well does not take into account the fact that gravity is a force that acts between all objects with mass, not just those that are close to a central point.
When the proton and electron enter the electric field that is pointed to the right, the proton will be deflected to the right and the electron will be deflected to the left. This is because the proton has a positive charge and the electron has a negative charge, and opposite charges are attracted to each other. The proton and electron will move at the same speed because the electric field does not affect their speed, only their direction of motion.
According to Einstein's theory of general relativity, the orbit of Halley's Comet is determined by the curvature of spacetime caused by the mass of the sun and other celestial bodies. The comet follows an elliptical orbit around the sun, with the sun at one of the foci of the ellipse. The shape of the orbit is determined by the mass of the sun, the distance of the comet from the sun, and the velocity of the comet.
The period of the orbit of Halley's Comet is 76 years, which means that the comet takes 76 years to complete one orbit around the sun. This period is determined by the distance of the comet from the sun, the mass of the sun, and the velocity of the comet. The further the comet is from the sun, the longer the period of its orbit. As the comet approaches the sun, its ices start to vaporize and create a bright tail that can be seen from Earth.
In summary, Einstein's theory of general relativity explains that Halley's Comet only appears every 76 years because of the shape of its orbit around the sun, which is determined by the mass of the sun and the distance of the comet from the sun, as well as the velocity of the comet. The orbit is an elliptical one and the distance from the sun causes the vaporization of ices which make the tail visible from Earth.
which of the following must be included in an investment advisory contract under nasaa rules? i the fact that prepaid fees will not be returned if the contract is terminated early ii the fact that assignment of the contract is only permitted with customer consent
The statement I ,II,III are the correct statement which must be be included in an investment advisory contract under nasaa rules .
State and provincial securities regulators in the United States, Canada, and Mexico are represented by the North American Securities Administrators Association (NASAA). Members of NASAA issue licences to businesses and their representatives, look into infringements of federal, state, and local laws, bring legal action when necessary, and inform the public about investment fraud. Members of NASAA take part in information exchange and multi-state enforcement activities through the association. According to NASAA regulations, the advice contract must include:
•Description of the services offered; •Term of the contract; •Formula for calculating fees; •Amount of prepaid fees to be returned if contract is terminated early; •No contract assignment is allowed without the customer's consent; •Whether the contract gives the adviser discretionary authority; and •Disclosure that the fee for managing equity securities may be higher than the fee for managing debt securities.
For such more questions on NASAA rules:
brainly.com/question/17056580
#SPJ4
Question :
Which of the following must be included in an investment advisory contract under NASAA rules? I The fact that prepaid fees will not be returned if the contract is terminated early
II The fact that assignment of the contract is only permitted with customer consent
III Whether the contract grants discretionary authority to the adviser
IV Disclosure that the fee for managing fixed income securities may be higher than for managing equity securities
A. I and II only
B. III and IV only
C. I, II, III only
D. I, II, III, IV
the mesh-current method is a general technique for solving circuits. you have probably used the mesh-current method to solve circuits with constant sources and resistors. fundamentally, it involves writing kvl equations for each mesh in a circuit. when the circuit contains a dependent source, you must write a constraint equation for each dependent source, in addition to the kvl equations. if a current source is shared by two meshes, you must write a supermesh kvl equation and a supermesh constraint equation. to use the mesh-current method to find the steady-state response of a circuit with a sinusoidal source, follow these steps:.
The mesh current method, also known as mesh analysis, is a technique for solving planar circuits for currents (and, indirectly, voltages) at any point in the electrical circuit.
Mesh analysis: what is its purpose?In order to find the unknown currents and voltages in any circuit, mesh analysis is a potent and versatile technique. Finding the loop currents solves the issue because any current in the circuit can then be calculated using the loop currents.The mesh current method, also known as mesh analysis, is a technique for solving planar circuits for currents (and, indirectly, voltages) at any point in the electrical circuit. A planar surface can be used to draw circuits that don't have any wires crossing over it.The mesh current method, also known as mesh analysis, is a technique for solving planar circuits for currents (and, indirectly, voltages) at any point in the electrical circuit.To learn more about mesh current refer to:
https://brainly.com/question/28192863
#SPJ4
Enter a formula for converting a speed given in meters per second to its value in kilometers per hour, using s as the given value.
s (km/h) =
The formula to convert the speed given in meter per second to kilometer per hour is m/s = 18/5 km/h.
The formula to convert the speed of kilometers per hour into the meters per second can be found as,
Let us say,
S km/h is the speed of the object, If we simply just put the value of the distance and time in the required quantity, we will get our results. so, we will put,
1 km = 1000 m.
1 hour = 3600 seconds.
S km/h = S 1000/3600 m/s
S km/h = S 5/18 m/s
18/5 km/h = m/s
So, the speed of the object can be converted by using the formula, 18/5 km/s = m/s.
To know more about speed, visit,
https://brainly.com/question/13943409
#SPJ4
what hanging mass (in kg) must be placed on the cord to keep the pulley from rotating (see the following figure)? the mass on the frictionless plane is 5.5 kg. the inner radius of the pulley is 20 cm, and the outer radius is 29 cm. (assume the 5.5 kg mass and the hanging mass are only connected to the inner and outer radii, respectively.)
To prevent the pulley from turning, 1.103 kg of hanging mass must be applied to the cord.
the cord's torque
It is necessary for the torque in the cord caused by the sliding mass to equal the torque caused by the hanging mass in order to prevent the pulley from turning.
These steps are used to compute the torque:
1 = 2, F1r1 = F2r2, m1gsin()r1 = m2gr2, m1sin()r1 = m2r2, and m2 = m1sin()r1/r2, respectively.
where m1 is the sliding mass.
The inner radius of the pulley is r1.
The angle of inclination of the plane, shown by r2, is the pulley's outer radius.
In order to prevent the pulley from rotating, 1.103 kg of hanging mass must be applied to the cord.
To know more about Torque visit:
brainly.com/question/14839816
#SPJ4
pls help me with this
thanks
i think it also doubles in area
conduct an experiment to determine how the potential energy of a block is transformed as it slides down an inclined surface.
If a mass slides down an incline, and the slope is frictionless, the gravitational potential energy is transformed to kinetic energy as it descends.
What is kinetic energy?In physics, an object's kinetic energy is the energy it has as a result of its motion. It is defined as the amount of work required to accelerate a body of a given mass from rest to a certain velocity. The body retains its kinetic energy after gaining it during acceleration until its speed changes. Kinetic energy is the energy that an item has as a result of its movement. If we wish to accelerate an item, we must apply force to it. Using force demands us to put in effort. After work is completed, energy is transferred to the item, and the thing moves at a new constant speed.
Here,
When a mass slides down an incline with no friction, its gravitational potential energy is converted to kinetic energy as it falls.
To know more about kinetic energy,
https://brainly.com/question/26472013
#SPJ4
A piano tuner stretches a steel piano wire with a tension of 765 N. The steel wire has a length of 0.900mand a mass of 6.75g .
Part A
What is the frequency f1 of the string's fundamental mode of vibration?
Express your answer numerically in hertz using three significant figures.
The fundamental frequency of the String is 177.42 Hz.
We define the frequency of a sinusoidal wave as the number of complete oscillations made by any wave element per unit of time. Thus, frequency is a parameter that describes the rate of oscillation and vibration.The time period of oscillation of a wave is defined as the time taken by any string element to complete an oscillation.The angular frequency refers to the angular displacement of any wave element per unit of time or the rate of change of the waveform phase.Given,
The Tension (T) in the String is 765 N.
Steel wire length (L) is 0.900 m
Mass of the string (m) is 6.75 g = 6.75 * 10^-3 kg.
Frequency of the string = n *(Velocity of the wave on the String/(2L) )
Velocity of the wave on the string is : V = [tex]\sqrt{\frac{T}{m/L} }[/tex]
Putting these values in above equation we get : V = 319.37 m/s
For Fundamental Frequency n = 1
Frequency = V / 2L
f = 319.37 / (2*0.9)
f = 177.42 Hz
So, the fundamental frequency of the String is 177.42 Hz.\
To know more about frequency visit;
https://brainly.com/question/9077138
#SPJ4
a 130 gg air-track glider is attached to a spring. the glider is pushed in 11.2 cmcm and released. a student with a stopwatch finds that 14.0 oscillations take 9.00 ss . for help with math skills, you may want to review: solving radical equations for general problem-solving tips and strategies for this topic, you may want to view a video tutor so
A 130 gg air-track glider is attached to a spring. the glider is pushed in 11.2 cmcm and released. a student with a stopwatch finds that 14.0 oscillations take 9.00 ss .
The period (T) of a spring-mass system can be calculated using the formula:
T = 2 * pi * sqrt(m / k)
where T is the Time period in seconds, m is the mass of the glider in kilograms, and k is the spring constant in N/m.
The frequency (f) of a spring-mass system can be calculated using the formula:
f = 1 / T
where f is the frequency in hertz (Hz) and T is the period in seconds.
The angular frequency (w) is given by :
w = 2 * pi * f
The amplitude (A) of a spring-mass system can be calculated using the formula:
A = x / (2 * pi)
where x is the displacement in meters.
You can use these formulas to find the Period, frequency, angular frequency and amplitude of the given spring-mass system.
Keep in mind that the displacement of the spring (11.2 cm) needs to be converted to meters (0.112 m) before calculating the amplitude.
Also, you have to convert the mass of the glider from gg to kg before applying the formulas.
Learn more about angular frequency here:
https://brainly.com/question/29107224
#SPJ4
the additional heat causes the kinetic energy of some of the liquid molecules to ---select--- so they can more easily escape into the gas phase. therefore, the temperature of the boiling water remains constant. since some of the liquid water changes to gas, the amount of liquid water
The additional heat causes the kinetic energy of some of the liquid molecules to Increase So they can more easily escape into the gas phase.
When we add heat to the water immediately the temperature does not increase as before increasing the temperature the Kinetic Energy of molecules of water increases first and the heat is used for the same for increasing the temperature.
And As a result, the temperature of the boiling water remains constant. since some of the liquid water changes to gas, the amount of liquid water is. And the same phenomenon occurs when the water is boiling is starts becoming vapor instate of increasing the temperature it changes its state from liquid to gaseous.
Learn More molecular Structure of water in a Gaseous state: https://brainly.com/question/1563317
#SPJ4
forces 2i-j+k, 3i+4j+4k, 5i+3j+3k acts through points with position vector 3i+2k, 4i-5j+ak, -4i-2j+4k respectively. Find the value of a,if the system of forces is in equilibrium
Answer:
For the system of forces to be in equilibrium, the vector sum of the forces must be equal to zero. Therefore, we can set up the following equation:
(2i-j+k) + (3i+4j+4k) + (5i+3j+3k) = 0
We can also express the force vectors in terms of the position vectors of the points at which they act as follows
F = (3i+2k)×(2i-j+k) + (4i-5j+ak)×(3i+4j+4k) + (-4i-2j+4k)×(5i+3j+3k) = 0
Expanding and simplifying the equation we get
3i+2k - 2j + k - 4i +5aj +4k -5j +4k +5i +3j -3k = 0
-i +3j +3k +5aj = 0
Therefore, a = -1/5
The value of a is -1/5.
when retracting the caliper piston on an integrated parking brake system: group of answer choices apply and release the parking brake at least 10 times to retract the piston use a pry bar to gently pry it back into the bore use a special c clamp to push the piston back into the bore use a special tool to screw it back into the bore
The piston is the most important part of the brake caliper, which is a crucial part of the entire brake system. In order to stop your car, pistons must force the brake pads to make contact with the brake rotor.
The parking brake or emergency brake is typically fastened to the back wheels of a vehicle. The parking brake is typically connected to the rear drum brakes on vehicles with them using cables, as seen in Figure 14-10. Integral parking brakes are what they are known as.
It is a "motor-on-caliper" technology that operates the caliper without the use of a separate parking cable by integrating an actuator into the caliper located on the back wheel. The existing water/foot parking lever has been eliminated, and now a single button can be used to accomplish the parking function.
For those who are unaware, a parking brake that is integral means that your caliper piston serves two purposes. When you push the brake pedal, pressure is first applied to the brake pads. Second, when you use the parking brake, a ratchet mechanism applies pressure.
To learn about piston
https://brainly.com/question/21852769
#SPJ4
A block weighing 50 N is lifted from A to C.
a) Find the work done against the gravity (the work done by the external force which lifted the block). Answer in units of J.
b) Find the difference ∆U = UA − UC of the potential energies.
The force F is equal to 50 N and the height h is not given, we cannot calculate the exact value of ∆U.
What is force?Force is an influence that can cause an object to change its motion, direction, shape, or stress state. It is a vector quantity, meaning it has both magnitude and direction.
a) The work done against gravity is equal to the force of gravity multiplied by the distance the block was lifted:
Work = F × d = 50 N × d
Since the distance is not given, we cannot calculate the exact amount of work done.
b) The potential energy of the block at point A is equal to the force of gravity (F) multiplied by the height (h) at which the block was initially located:
UA = F × h
Similarly, the potential energy of the block at point C can be calculated as:
UC = F × 0
Since the block is lifted from A to C, the difference of potential energies is given by:
∆U = UA − UC = F × h − 0 = F × h
Since the force F is equal to 50 N and the height h is not given, we cannot calculate the exact value of ∆U.
To learn more about force
https://brainly.com/question/12785175
#SPJ4
compare the magnitude of the stone's velocity and the magnitude of the pulley's linear velocity at the point of contact between the wire and pulley. compare the magnitude of the stone's velocity and the magnitude of the pulley's linear velocity at the point of contact between the wire and pulley. the magnitude of the velocity of the stone is less than that of the point of contact. the magnitude of the velocity of the stone is the same as that of the point of contact. the magnitude of the velocity of the stone is greater than that of the point of contact.
The magnitude of the velocity of the stone is less than that of the point of contact.
What is velocity, exactly?The displacement that an object or particle experiences with respect to time is expressed vectorially as velocity. The metre per second (m/s) is the accepted unit of velocity magnitude (also known as speed). Alternately, the magnitude of velocity can be expressed in centimetres per second (cm/s). The velocity is the rate at which a given displacement changes. By figuring out the displacement to total time ratio, it may be calculated. The same as for speed, "m/s" is the SI unit for velocity. Velocity is a vector, whereas speed is a scalar. The letters v (italic) stand for velocity and v for speed (boldface). A bar appears over the symbol for average values.
Learn more about the Velocity here: https://brainly.com/question/80295
#SPJ4
a crate of mass 100 kg is at rest on a horizontal floor. the coefficient of static friction between the crate and the floor is 0.4, and the coefficient of kinetic friction is 0.3. a force f of magnitude 344 n is then applied to the crate, parallel to the floor. which of the following is true?
The statement about crate that is true is that D. The crate will not move.
Force is any interaction that, when unopposed, will change the motion of an object. The maximum force that static friction can exert on the crate is
μsFN = μsFw =
μs mg = (0.4)(100 kg)(10 N/kg)
= 400 N
Since the force applied to the crate is only 344 N, static friction is able to apply that same magnitude of force on the crate, keeping it stationary. [B is incorrect because the static friction force is not the reaction force to F; both F and Ff (static) act on the same object (the crate) and therefore cannot form an action/reaction pair.]
To learn more about force check the link below:
https://brainly.com/question/12785175
#SPJ4
Complete question: A crate of mass 100 kg is at rest on a horizontal floor. The coefficient of static friction between the crate and the floor is 0.4, and the coefficient of kinetic friction is 0.3. A force F of magnitude 344 N is then applied to the crate, parallel to the floor. Which of the following is true?
A. The crate will accelerate across the floor at 0.5 m/s2.
B. The static friction force, which is the reaction force to F as guaranteed by Newton’s third law, will also have a magnitude of 344 N.
C. The crate will slide across the floor at a constant speed of 0.5 m/s.
D. The crate will not move.
E. None of the above
Hence option D is the correct choice.
The right statement is that the crate won't move.
Any interaction that alters an object's motion while it is unopposed is referred to as force. The crate can only withstand a maximum force of static friction of
μsFN = μsFw =
μs mg = (0.4)(100 kg)(10 N/kg)
= 400 N
The box is subjected to a force of just 344 N, therefore static friction may exert the same force, holding the crate immobile. [B is erroneous since F and Ff (static) operate on the same object, the crate, and so cannot form an action/reaction pair. F and Ff (static) are not the response force to F.]
For such more question on crate
https://brainly.com/question/15262937
#SPJ4
Note: The correct question would be as bellow,
A crate of mass 100 kg is at rest on a horizontal floor. The coefficient of static friction between the crate and the floor is 0.4, and the coefficient of kinetic friction is 0.3. A force F of magnitude 344 N is then applied to the crate, parallel to the floor. Which of the following is true?
A. The crate will accelerate across the floor at 0.5 m/s2.
B. The static friction force, which is the reaction force to F as guaranteed by Newton’s third law, will also have a magnitude of 344 N.
C. The crate will slide across the floor at a constant speed of 0.5 m/s.
D. The crate will not move.
E. None of the above