Answer:
a) 300K
b) 373K
c) 273K
Explanation:
to go from °C to K all you have to do is add 273.
How much energy is required to remove a neutron from the nucleus of an atom of carbon-13?
Answer:
uh i think 12?
Explanation:
How many significant figures
are in this number?
3 x 10^6
What are metalloids?
A metalloid is a type of chemical element which has a preponderance of properties in between, or that are a mixture of, those of metals and nonmetals.
Answer:
Metalloid, in chemistry, an imprecise term used to describe a chemical element that forms a simple substance having properties intermediate between those of a typical metal and a typical nonmetal. There is no single property which can be used to unambiguously identify an element as a metalloid.
Given that a 0.130 M HCl(aq) solution costs $39.95 for 500 mL, and that KCl costs $10/ton, which analysis procedure is more cost-effective
Answer:
KCl is cost effective
Explanation:
In order to know this, we need to see how much it cost 1 g of each reactant. Let's begin with HCl
HCl:
In this case, let's calculate the moles of HCl in a 0.130 M solution and then, the mass of HCl using the molecular weight of 36.5 g/mol, to get the cost the HCl at the end using the given price:
nHCl = 0.130 moles/L * 0.5 L = 0.065 moles
mHCl = 0.065 moles * 36.5 g/mol = 2.3725 g
Cost HCl = 39.95 $ / 2.3725 g = 16.84 $/g
Conclusion, 1 g of HCl costs 16.84 $
KCl:
In this case, it's pretty obvious that 1 ton of KCl cost 10$, so, there is no need to do further calculations because 1 ton (or more than 1000 kg of the salt) it's just 10$. This is less expensive than the 16.84$ for just 1 g of HCl, so, final conclusion, KCl is more cost-effective.
Hope this helps
A student burned her magnesium sample according to the procedure and obtained a light gray product. Since the crucible looked dirty anyway, she skipped the steps to convert the Mg3N2 contamination to MgO, weighed the gray sample, and calculated the mass of her product. Was her resulting mass likely to be higher or lower the expected
Answer:
The resulting mass will be higher than expected
Explanation:
We have to keep this in mind; When magnesium is being burnt in air, two reactions are taking place. The first one is;
2Mg(s) + O2(g) ------> MgO(s) -------1
And
3Mg(s) + N2(g) -------> Mg3N2(s) ---------2
Now, if the steps that should be taken to convert Mg3N2 to MgO are not taken, the reaction is much quicker but a higher mass of solid is obtained than what was expected.
This higher mass of solid obtained owes to the fact that Mg3N2 from reaction 2 was not converted to MgO leading to contamination of the product.
Is Ag3 PO4 ionic or covalent?
WHAT IS A PLACE WHERE BOOKS ARE CLASSIFIED! I NEED HELP!
Answer:
From the Online Catalog to the Shelf
Libraries in the United States generally use either the Library of Congress Classification System (LC) or the Dewey Decimal Classification System to organize their books. Most academic libraries use LC, and most public libraries and K-12 school libraries use Dewey.
Explanation:
Answer:
From the Online Catalog to the Shelf
Libraries in the United States generally use either the Library of Congress Classification System (LC) or the Dewey Decimal Classification System to organize their books. Most academic libraries use LC, and most public libraries and K-12 school libraries use Dewey.
how many molecules of sugar are in 4.67 miles of sugar?
Select all of the Earth Systems that contain carbon.
Oa Atmosphere
Ob Geosphere
Oc Biosphere
Od Hydrosphere
Answer:
a, c, d
Explanation:
biosphere atmosphere hydrosphere lithosphere
The octane rating of gasoline is a relationship of the burning efficiency of the given gasoline mixture to the burning efficiency of octane (C8H18). Like most hydrocarbons, octane reacts with oxygen gas to produce carbon dioxide and water. The unbalanced equation for this reaction is
Answer:
C₈H₁₈(l) + O₂(g) ⇒ CO₂(g) + H₂O(l)
Explanation:
Let's consider the unbalanced equation for the combustion reaction of octane.
C₈H₁₈(l) + O₂(g) ⇒ CO₂(g) + H₂O(l)
We can begin balancing H atoms by multiplying H₂O by 9, and C atoms by multiplying CO₂ by 8.
C₈H₁₈(l) + O₂(g) ⇒ 8 CO₂(g) + 9 H₂O(l)
Finally, we get the balanced equation by multiplying O₂ by 12.5.
C₈H₁₈(l) + 12.5 O₂(g) ⇒ 8 CO₂(g) + 9 H₂O(l)
Answer:
The coefficents will be 2, 25 --> 16, 18
Explanation:
assume that the density of all solutions are 1.000g/ml 1. Calculate the molarity of calcium in 1.9g of calcium chloride diluted in 100 ml of Di water. 2 Calculate the concentration of both calcium and chloride lons in problem 1 in units of mg/mL, ug/L, mg/L and ug/mL. 3. Calculate the concentration of both calcium and chloride ion in problem 1 in units of ppm and ppb. You may assume that the density of the solution is 1.0 g/ml 4. You have been provided 100 ml of a 1000 ug/ml barium standard. What volume of this standard must be diluted to a final volume of 50 ml using DI water to produce a 30 ug/mL standard
Answer:
1. 0.1712M
2. 6.86mg/mL Ca, 12.14mg/mL Cl, 6860000ug/L Ca, 12140000ug/L Cl, 6860mg/L Ca, 12140mg/L Cl, 6860ug/mL Ca, 12140ug/mL Cl.
3. 6860ppm Ca and 12140ppm of Cl.
4. 1.5mL of the 1000ug/mL barium standatd must be taken.
Explanation:
1. Molarity is defined as the amount of moles of solute (Calcium chloride) present in 1L of solution.
The moles of CaCl₂ are:
1.9g CaCl₂ * (1mol / 110.98g) = 0.01712 moles
In 100mL = 0.10L:
0.01712mol / 0.10L = 0.1712M
2. The masses of Calcium and Chloride ions are:
1.9g * (40.078g Ca / 110.98g) = 0.686g Ca
And:
1.9g - 0.686g Ca = 1.214g Cl
mg/mL:
686mg Ca / 100mL = 6.86mg/mL Ca
1214mg Cl / 100mL = 12.14mg/mL Cl
ug/L:
686000ug / 0.1L = 6860000ug/L Ca
1214000ug/ 0.1L = 12140000ug/L Cl
mg/L:
686mg Ca / 0.1L = 6860mg/L Ca
1214mg Cl / 0.1L = 12140mg/L Cl
ug/mL:
686000ug Ca / 100mL = 6860ug/mL Ca
1214000ug Cl / 100mL = 12140ug/mL Cl
3. ppm are defined as mg/L, the ppm of Ca are 6860ppm Ca and 12140ppm of Cl
4. The solution must be diluted from 1000ug/mL to 30ug/mL, that is a dilution of:
1000ug/mL / 30ug/mL:
33.33 times must be diluted the solution.
As final volume of the diluted solution must be 50mL, the volume of the standard needed is:
50mL / 33.33 times = 1.5mL of the 1000ug/mL barium standatd must be taken
Look at the potential energy diagram below. What amount of energy does the products have ?
100
80
PE
50
AB
40
C D
20
Progress of the reaction
40 KJ
60 KJ
O 20 KJ
80 KJ
Answer:
20 kJ
Explanation:
The products are C + D which is on the right side of the diagram. And it says it has 20 kJ of energy.
What are the names of the stable forms of oxygen?
Answer:
18 O, 17 O, and 16 O
Explanation:
three naturally stable isotopes
The stable forms of oxygen are molecular oxygen ([tex]O_{2}[/tex]) and ozone ([tex]O_{3}[/tex]). Molecular oxygen is the most common form in the Earth's atmosphere, while ozone is found in the ozone layer of the atmosphere and has a different molecular structure than [tex]O_{2}[/tex].
The most stable type of oxygen in the Earth's atmosphere is [tex]O_{2}[/tex], sometimes referred to as molecular oxygen or dioxygen. It is made up of two oxygen atoms joined by a link.
Another stable form of oxygen is [tex]O_{3}[/tex], also referred to as ozone. It is a molecule made up of three linked oxygen atoms. The ozone layer in the stratosphere of the Earth contains ozone, which is essential for protecting life on the planet by absorbing damaging ultraviolet (UV) radiation from the Sun.
Learn more about oxygen, here:
https://brainly.com/question/13905823
#SPJ6
Which statement is true about the speed of light? (2 points)
Light travels relatively slowly.
Distance in space is measured using the speed of light.
Time in space is measured using the speed of light.
The speed of light is unknown
Answer:
2nd option is the correct answer of this question
Answer:
yes it is b
Explanation:
Which would be another way to make the ice melt faster
Answer:
d because ur heating the ice and causing friction
After mixing the solutions in a separatory funnel, the stopper should be ________and the liquid should be ________and the layers allowed to separate. When you get close to the interface between the layers, ________the funnel and________until the first layer______ is collected. _______to collect the second layer.
Answer:
The answer is below
Explanation:
The separation technique is used for separating immiscible liquids.
When separating, the stopper has to be removed when draining the lower layer so as to prevent a vacuum. If vacuum is allowed, the draining rate will reduce and stop.
The liquid should be mixed by shaking the funnel and then opening the stopcock so as the vent out gases.
When near interface between the layers, you should set your eye level so that you do not drain up to the second layer.
After completely draining the first layer, the second layer should be collected in a new flask.
After mixing the solutions in a separatory funnel, the stopper should be removed and the liquid should be mixed thoroughly and the layers allowed to separate. When you get close to the interface between the layers, get eye level with the funnel and slow the draining until the first layer is collected. Switch to a new flask to collect the second layer.
After mixing the solutions in a separatory funnel, the stopper should be removed and the liquid should be mixed thoroughly and the layers allowed to separate. When you get close to the interface between the layers, get eye level with the funnel and slow the draining until the first layer is collected. Switch to a new flask to collect the second layer.
Separatory funnel:It is used in liquid-liquid extractions to separate (partition) the components of a mixture into two immiscible solvent phases of different densities.The lab apparatus majorly used for the separation of the two immiscible solutes in the given mixture. For example, oil and alcohol. It is applicable to separate the solvent which are immiscible and which cannot be separated by steam distillation. This method is useful for liquids only.Learn more:
brainly.com/question/24108403
What is the specific heat of a 44 g piece of metal if 202 Joules of heat are required to
raise the temperature from 22ᵒC to 33.6ᵒC?
Answer:
≈ 395,8 J/(kg * °C)
Explanation:
m = 44 g = 0,044 kg
[tex]t_{1}[/tex] = 22 °C
[tex]t_{2}[/tex] = 33,6 °C
Q = 202 J
The formula is: Q = c * m * ([tex]t_{2} - t_{1}[/tex])
c = [tex]\frac{Q}{m * (t_{2} - t_{1} )}[/tex]
Calculating:
c = 202 J / 0,044 kg * (33,6 °C - 22 °C) ≈ 395,8 J/(kg * °C)
In order to be in a position to manipulate any operation, one has to know all the fine details of the system and where and how one might apply subtle changes to affect the outcome. When looking at chemical reactions, it is from the study of its kinetics that one gleams the insight necessary to be able to do this. The main use of chemical kinetics is to measure the speed of a chemical reaction. But more importantly, in measuring the speed of a reaction, one gains insight as to what part of the reaction imparts this speed (or lack thereof) and thus allows one to propose a specific mechanism that details the critical pathway for the reaction. Measuring the speed of a chemical reaction is very similar to measuring speed in general, except that instead of talking in terms of distance traveled per unit time we are measuring either reactants consumed per unit time or products produced per unit time. There are many factors that affect the speed of a chemical reaction, some of the more common ones being:
Answer:
See explanation
Explanation:
Chemical kinetics, the branch of physical chemistry that is concerned with understanding how fast or how slow chemical reactions occur (Encyclopedia Britannica).
The study of the kinetics of a chemical reaction is helpful in many ways. Most important is the fact that it allows one to propose a specific mechanism that details the critical pathway for the reaction.
The factors that affect the rate of chemical reaction includes; concentration of reactants, temperature, nature of reactants , the solvent used, the presence of a catalyst, presence of light, surface area of reactants and pressure for gaseous reactants.
help! help! plz............
1)What is most important of periodicity lest 4
2)why are energies of
various energy levels in hydrogen atomic are negative?
Rotation about C-C single bonds allows a compound to adopt a variety of _____________. conformations configurations formations isomers projections are often used to draw the various conformations of a compound. conformations are lower in energy, while conformations are higher in energy. The difference in energy between staggered and eclipsed conformations of ethane is referred to as strain. strain occurs in cycloalkanes when bond angles deviate from the preferred °. The conformation of cyclohexane has no torsional strain and very little angle strain. The term "ring flip" is used to describe the conversion of one conformation into the other. When a ring has one substituent the equilibrium will favor the chair conformation with the substituent in the position.
Answer:
Conformation
Explanation:
Conformation refers to "any of the spatial arrangements which the atoms in a molecule may adopt and freely convert between, especially by rotation about individual single bonds"(Oxford dictionary).
Carbon-Carbon single bonds are known to undergo rotations about its axis. These rotations leads to various conformations. The energy difference between conformations may be low or high depending on the structure of the molecule. The difference in energy between conformations determines a molecules's preferred conformation.
How many formula units are in 4.52 moles of H3SO3?
Type your answer
Answer:
The answer is 98.07848. We assume you are converting between grams H2SO4 and mole. You can view more details on each measurement unit: This compound is also known as Sulfuric Acid. The SI base unit for amount of substance is the mole. 1 grams H2SO4 is equal to 0.010195916576195 mole.
Quick conversion chart of moles H2SO3 to grams
1 moles H2SO3 to grams = 82.07908 grams
2 moles H2SO3 to grams = 164.15816 grams
3 moles H2SO3 to grams = 246.23724 grams
4 moles H2SO3 to grams = 328.31632 grams
5 moles H2SO3 to grams = 410.3954 grams
6 moles H2SO3 to grams = 492.47448 grams
7 moles H2SO3 to grams = 574.55356 grams
8 moles H2SO3 to grams = 656.63264 grams
9 moles H2SO3 to grams = 738.71172 grams
10 moles H2SO3 to grams = 820.7908 grams
Some hypothetical alloy is composed of 25 wt% of metal A and 75 wt% of metal B. If the densities of metals A and B are 6.17 and 8.00 g/cm3 , respectively, and their respective atomic weights are 171.3 and 162.0 g/mol, determine whether the crystal structure for this alloy is simple cubic, facecentered cubic, or body-centered cubic. Assume a unit cell edge length of 0.332 nm
Answer:
Simple cubic
Explanation:
The density of metal A (ρa) = 6.17 g/cm³, The density of metal B (ρb) = 8 g/cm³, The atomic weight of metal A (Aa) = 171.3 g/mol, The atomic weight of metal B (Ab) = 162 g/mol, the unit cell edge length (a) = 0.332 nm, concentration of metal A (Ca) = 25%, concentration of metal B (Cb) = 75%
The average density is given by:
[tex]\rho_{ave}=\frac{100}{\frac{C_a}{\rho_a} +\frac{C_b}{\rho_b} } \\\\\rho_{ave}=\frac{100}{\frac{25}{6.17} +\frac{75}{8} } =7.45\ g/cm^3\\\\The\ average\ atomic\ weight\ is:\\\\A_{ave}=\frac{100}{\frac{C_a}{A_a} +\frac{C_b}{A_b} } \\\\A_{ave}=\frac{100}{\frac{25}{171.3} +\frac{75}{162} } =164.23\ g/mol\\\\The\ number\ of\ atoms\ per\ unit(n)\ is:\\\\n=\frac{\rho_{ave}*a^3*N_A}{A_{ave}} \\\\N_A=Avogadro\ constant=6.02*10^{22} \ mol^{-1},a=0.332\ nm=3.32*10^{-8}cm\\\\Substituting:\\\\[/tex]
[tex]n=\frac{\rho_{ave}*a^3*N_A}{A_{ave}} =\frac{7.45*(3.32*10^{-8})^3*6.02*10^{23}}{164.23} \\\\n=0.999\\[/tex]
n≅1
Since n≅1, the crystal structure for this alloy is simple cubic
Aqueous hydrochloric acid will react with solid sodium hydroxide to produce aqueous sodium chloride and liquid water . Suppose 14. g of hydrochloric acid is mixed with 6.55 g of sodium hydroxide. Calculate the minimum mass of hydrochloric acid that could be left over by the chemical reaction. Round your answer to significant digits.
Answer:
8.02 g of HCl could be left over by the chemical reaction
Explanation:
We propose the reaction:
HCl(aq) + NaOH (s) → NaCl (aq) + H₂O (l)
Ratio is 1:1. First of all, we determine the moles of reactants:
14 g . 1mol / 36.45g = 0.384 mol of acid
6.55 g. 1mol / 40g = 0.164 mol of base
If a determined mass of HCl, could be left; this means that the acid is the excess reagent.
For 0.164 moles of NaOH, we need 0.164 moles of HCl.
As we have 0.384 moles, (0.384 - 0.164) = 0.220 moles of acid are left over in the reaction. We convert the moles to mass:
0.220 mol . 36.45 g /1mol = 8.02 g
HELP! URGENT Which of the following best states the relationship between erosion and deposition?
A.
When the energy transporting sediments diminishes, the sediments settle in a low-lying area; therefore, deposition always follows erosion.
B.
When the energy transporting sediments diminishes, the sediments settle in a low-lying area; therefore, erosion always follows deposition.
C.
When rock is broken down into sediments, the sediments are eventually transported to another location; therefore, deposition is a form of erosion.
D.
When rock is broken down into sediments, the sediments are eventually transported to another location; therefore, erosion is a form of deposition.
How many atoms are in 34 g of Cu?
Answer:
Babygirl these are double DD'S
Explanation:
OooOOO I'm hurt oh my neck my neck and my back
Based on your understanding of color's relationship to wavelength, identify the approximate wavelength of light (nm) emitted by strontium when it was burned in Part C. (No quantitative data was collected for this; you are giving an approximate value only, based on what you observed.) Explain your reasoning in full, making sure to cite specific data and observations to support your answer.
Answer:
The flame colour of strontium is red. Red has a wavelength of around 620 to 750 nm.
Explanation:
Visible light is part of the electromagnetic spectrum. The electromagnetic waves are composed of electric and magnetic fields.
The visible spectrum is composed of seven different wavelengths that corresponds to different colours. When a metallic element is exposed flame, one of these colours is observed. This is commonly called the flame test.
The flame colour of strontium is red. Red has a wavelength of around 620 to 750 nm.
The approximate wavelength of light (nm) emitted by strontium when it was burned is red, where red has a wavelength of round 620-750 nm.
Wavelength of light emitted by strontiumGenerally, Visible mild is phase of the electromagnetic spectrum. the electromagnetic waves are composed of electric powered and magnetic fields. When a metal factor is uncovered flame, one of they seven colors of visible spectrum is seen.
The flame shade of strontium is red, where red has a wavelength of round 620-750 nm.
For more information on Wave
https://brainly.com/question/3004869
Determine the energy change in the following reaction. This reaction is considered ...
C6H12 + O2
CO2 + H2O + heat
energy absorbed is equal to the energy released
endothermic
O isothermic
O exothermic
Answer:isothermic
Explanation:
Answer:
Energy abosorbed = Energy released.
Thus ISOTHERMIC
54.1miles/gallons how many liters of gas will be consumed traveling 132 km
Answer:
5.75 L.
Explanation:
From the question given above, the following data were obtained:
Rate = 54.1 miles/gallons
Distance = 132 km
Volume (in L) consumed =?
Next, we shall convert 132 km to mile. This can be obtained as follow:
1 km = 0.621 mile
Therefore,
132 km = 132 km × 0.621 mile / 1 km
132 km = 81.972 mile
Next, we shall determine the volume (in gallons) of the gas needed. This can be obtained as follow:
Rate = 54.1 miles/gallons
Distance = 81.972 mile
Volume (in gallon) =?
Rate = Distance / volume
54.1 = 81.972 / volume
Cross multiply
54.1 × volume = 81.972
Divide both side by 54.1
Volume = 81.972 / 54.1
Volume = 1.52 gallon.
Finally, we shall convert 1.52 gallon to litre (L). This can be obtained as follow:
1 gallon = 3.785 L
Therefore,
1.52 gallon = 1.52 gallon × 3.785 L / 1 gallon
1.52 gallon = 5.75 L
Therefore, 5.75 L of the gas will be consumed.
Phosphorus is commercially prepared by heating a mixture of calcium phosphate, sand, and coke in an electric furnace. The process involves two reactions. 2 Ca3(PO4)2(s) 6 SiO2(s) 6 CaSiO3(l) P4O10(g) P4O10(g) 10 C(s) P4(g) 10 CO(g) The P4O10 produced in the first reaction reacts with an excess of coke (C) in the second reaction. Determine the theoretical yield of P4 if 293.5 g Ca3(PO4)2 and 378.5 g SiO2 are heated. (No Response) g If the actual yield of P4 is 44.9 g, determine the percent yield of P4.
Answer:
76.6% is percent yield of P₄
Explanation:
Percent yield is defined as 100 times the ratio of actual yield and theoretical yield. To solve this quesiton we need to find the theoretical yield of the reaction. Using:
2Ca₃(PO₄)₂(s) + 6SiO₂(s) → 6CaSiO₃(l) + P₄O₁₀(g)
P₄O₁₀(g) + 10C(s) → P₄(g) + 10CO(g)
We need to find the moles of Ca₃(PO₄)₂ and SiO₂ to find limiting reactant. With limiting reactant we can find moles of P₄O₁₀ = Moles of P₄. We must convert the moles of P₄ to mass using Molar mass (P₄ = 123.895g/mol):
Moles Ca₃(PO₄)₂ -Molar mass: 310.1767g/mol-
293.5g * (1mol / 310.1767g) = 0.9462moles
Moles SiO₂ -Molar mass: 60.08g/mol-:
378.5g * (1mol / 60.08g) = 6.30 moles
For a complete reaction of 6.30 moles of SiO₂ there are required:
6.30 moles SiO₂ * (2 moles Ca₃(PO₄)₂ / 6 moles SiO₂) =
2.10 moles Ca₃(PO₄)₂. As there are just 0.9462 moles, Ca₃(PO₄)₂ is limiting reactant
Moles P₄O₁₀ = Moles P₄:
0.9462moles Ca₃(PO₄)₂ * (1mol P₄O₁₀ / 2 mol Ca₃(PO₄)₂) = 0.4731 moles P₄O₁₀ = Moles P₄.
The mass is:
0.4731 moles P₄ * (123.895g / 1mol) = 58.6g = Theoretical yield.
Percent yield is:
44.9g / 58.6g * 100 =
76.6% is percent yield of P₄what causes deep ocean currents to flow
Answer:Deep ocean currents (also known as Thermohaline Circulation) are caused by: ... The sinking and transport of large masses of cool water gives rise to the thermohaline circulation, which is driven by density gradients due to variations in temperature and salinity. The earth's rotation also influences deep ocean currents.
Explanation: