Answer:
1) Ba(OH)₂
2) The correct option is a) they conduct electricity.
Explanation:
To deduce the formula of Barium hydroxide, we have to go to the periodic table and look for the Barium (Ba), which is in group 2 and has an ionic charge of 2+. Hydroxides are not an element that is present in the periodic table is the combination of Oxygen and Hydrogen (OH), and its ionic charge is 1-.
To name this substance, we write the elements that form it, which are Ba OH, then we see the ionic charges that they have, Ba2+ OH 1- and we change these charges giving the 2+ to the OH and the 1- to the Ba. It would look Ba OH₂; we do not write the 1, and as there is a 2, the OH, has to be between brackets so that the final formula is Ba(OH)₂. What we did is balancing the charges of the elements. In other words, we need 2 OH for every Ba. Hydroxides give an electron to balance the Ba ionic charge.
Barium Hydroxide is an ionic compound because ionic compounds are formed by a metal (Ba) and a nonmetal element (OH), ionic compounds are charged, so when they are in an aqueous solution they conduct electricity because their ions move freely in the solution.
What shape is represented by three bound groups and one lone pair around a
central atom?
A. Bent
B. Tetrahedral
C. Linear
D. Trigonal pyramidal
Answer:
D Trigonal pyramidal
Explanation went over in class:
Answer:
D. Trigonal pyramidal
Explanation:
A P E X !
what is an electrolyte? the fastest answer will get bainliest.
Answer:
Electrolytes are substances which undergo chemical change when electricity is passed through them.
Which action destroys topsoil?
Answer:
I think it erosion
Explanation:
Well erosion washes away top soil
Adding a base to a solution would...?
Answer:
it would decrease [h+]
Explanation:
This is due to neutralization If a base is added to an acidic solution, the solution becomes less acidic and its position changes to the middle of the pH scale.
hope this helps
Answer:
Raise the pH
decrease [H+]
Explanation:
=> Adding base would raise the pH (Bases have more pH and Acids have less pH)
=> Adding base would decrease the concentration of [H+] ions as it contains hydroxyl ions which neutralized with H+ ions so as a result the concentration of [H+] ions decreases.
I'm a scientist working on a very high-class operation in a classified area, we experienced some very strange encounters with the people we test on, like trying to bite us,attack us causing harm i think we discovered something.
Answer:
The most important first realization is to find out if the patients are deceased and their bodies are acting under an outside volition such as a virus reanimating the body through the use of the brain stem. If they are still living then they are what would be called infected if dead they are the undead naturally enough. Keep them contained as best you can but knowing scientists they will get free. When facing an infected they can die to any injuries that a normal human can they just won't react to pain so don't shoot for the head blast that thing in the chest then hit it in the head while it's down. Forget hand to hand combat or most close-ranged weapons unless absolutely necessary because close contact means exposure to fluids from the zombie they don't have to bite you to turn you. There is so much more to be said about this I recommend picking up the ZAS zombie survival book I recently got it and have not yet finished it but have learned a great deal.
Explanation:
Yes I fully understand this is not real and I simply felt like answering in a detailed manner for fun and that book is a serious recommendation.
Answer:
The most significant first acknowledgment is to see whether the patients are expired and their bodies are acting under an outside volition, for example, an infection vivifying the body using the cerebrum stem. On the off chance that they are as yet living, at that point they are what might be called tainted if dead they are the undead normally enough. Keep them contained as well as can be expected however knowing researchers they will get free. When confronting a tainted they can bite the dust to any wounds that an ordinary human can they just won't respond to torment so don't go for the head shoot that thing in the chest at that point hit it in the head while it's down. Disregard hand to hand battle or most close-extended weapons except if completely fundamental since close contact implies introduction to liquids from the zombie they don't need to nibble you to turn you. There is quite a lot more to be said about this I suggest getting the ZAS zombie endurance book I as of late got it and have not yet completed it yet have taken in a lot.
Explanation:
Potassium hydrogen tartrate is an acid used in making cookies such as snicker doodles. (In your home, it is called cream of tartar.) It can be titrated with a base such as KOH to determine purity. A sample of 0.500 g is titrated to a pink endpoint with 21.58 mL of 0.1125 M KOH. Determine the percentage of potassium hydrogen tartrate (KHC4H4O6) in the sample. The acid/base ratio is 1:1.
Answer:
91.4%
Explanation:
Potassium hydrogen tartrate, KHT, reacts with KOH as follows.
KHT + KOH → H₂O + K₂T
where 1 mole of acid (KHT) reacts per mole o base (KOH), -That is acid/base ratio 1:1
The endpoint of a titration is the point in which moles of KOH = moles of KHT, you can see this endpoint with an indicator or doing a potentiometric titration.
As the endpoint requires 21.58mL = 0.02158L of a 0.1125M KOH, moles of KOH = moles of KHT are:
0.02158L × (0.1125mol / L) = 2.428x10⁻³ moles of KOH = moles of KHT
To convert these moles to grams you use molar mass of KHT (188.177g/mol):
2.428x10⁻³ moles of KHT × (188.177g / mol) = 0.457g of KHT are in the sample.
As you add 0.500g of sample, percentage of KHT in the sample is:
(0.457g / 0.500g) × 100 =
91.4%-That is the purity of the sample-
Which of these is an ex
example of a composite material?
Answer:
A composite material is a material made from two or more constituent materials with significantly different physical or chemical properties that, when combined, produce a material with characteristics different from the individual components.
Explanation:
you're welcome
)Assertion: Corrosion is a beneficial process for metals. Reason : Galvanising and electroplating of metals prevent corrosion.
Question 1 of 10
Which two terms apply to oceanic crust rather than continental crust?
A. Thicker
O B. Lighter in color
0 C. Denser
I D. Younger in age
The two terms apply to oceanic crust rather than continental crust C. Denser and D. Younger in age
What is the oceanic crust made up of?
Oceanic Crust Oceanic crust, extending 5-10 kilometers (3-6 kilometers) beneath the ocean floor, is mostly composed of different types of basalts. Geologists often refer to the rocks of the oceanic crust as “sima.” Sima stands for silicate and magnesium, the most abundant minerals in oceanic crust.
What is an example of oceanic crust?Oceanic crust is thin (6 km thick) and dense (about 3.3 g/cm), consisting of basalt, gabbro, and peridotite. They include oceanic sediments (e.g. radiolarites, turbidites) and oceanic crust (e.g. basalt, pillow lava).
Learn more about Oceanic crust here https://brainly.com/question/26053779
#SPJ2
In calculating the equilibrium constant for a reaction, the coefficients of the chemical equation are used as exponents for the factors in the equilibrium expression. TRUE FALSE
Answer: The given statement is TRUE.
Explanation:
An equilibrium reaction is one in which rate of forward reaction is equal to the rate of backward reaction.
Equilibrium constant is defined as the ratio of the product of the concentration of products to the product of the concentration of reactants each raised to their stochiometric coefficient.
For example for the given equilibrium reaction;
[tex]2H_2O(g)\leftrightharpoons 2H_2(g)+O_2(g)[/tex]
[tex]K_{eq}=\frac{[H_2]^2[O_2]}{[H_2O]^2}[/tex]
Thus the given statement that in calculating the equilibrium constant for a reaction, the coefficients of the chemical equation are used as exponents for the factors in the equilibrium expression is True.
A sample of O2 gas is collected over water at 25oC at a barometric pressure of 751 torr. The vapor pressure of water at 25oC is 23.8 torr. What is the partial pressure of the O2 gas in the sample
Answer:
727.7 torr
Explanation:
Since the gas was collected over water, it is likely to be saturated with water vapour and the total pressure is given as;
Ptotal = Pgas + Pwater
From the question;
Ptotal = 751 torr
Pgas = ?
Pwater = 23.8 torr
Making Pgas subject of equation, we have;
Pgas = Ptotal - Pwater
Pgas = 751 torr - 23.8 torr
Pgas = 727.7 torr
What is the total energy change for the following reaction:CO+H2O-CO2+H2
Answer:
[tex]\large \boxed{\text{-41.2 kJ/mol}}[/tex]
Explanation:
Balanced equation: CO(g) + H₂O(g) ⟶ CO₂(g) + H₂(g)
We can calculate the enthalpy change of a reaction by using the enthalpies of formation of reactants and products
[tex]\Delta_{\text{rxn}}H^{\circ} = \sum \left( \Delta_{\text{f}} H^{\circ} \text{products}\right) - \sum \left (\Delta_{\text{f}}H^{\circ} \text{reactants} \right)[/tex]
(a) Enthalpies of formation of reactants and products
[tex]\begin{array}{cc}\textbf{Substance} & \textbf{$\Delta_{\text{f}}$H/(kJ/mol}) \\\text{CO(g)} & -110.5 \\\text{H$_{2}$O} & -241.8\\\text{CO$_{2}$(g)} & -393.5 \\\text{H$_{2}$(g)} & 0 \\\end{array}[/tex]
(b) Total enthalpies of reactants and products
[tex]\begin{array}{ccr}\textbf{Substance} & \textbf{Contribution)/(kJ/mol})&\textbf{Sum} \\\text{CO(g)} & -110.5& -110.5 \\\text{H$_{2}$O(g)} &-241.8& -241.8\\\textbf{Total}&\textbf{for reactants} &\mathbf{ -352.3}\\&&\\\text{CO}_{2}(g) & -393.5&-393.5 \\\text{H}_{2} & 0 & 0\\\textbf{Total}&\textbf{for products} & \mathbf{-393.5}\end{array}[/tex]
(c) Enthalpy of reaction [tex]\Delta_{\text{rxn}}H^{\circ} = \sum \left( \Delta_{\text{f}} H^{\circ} \text{products}\right) - \sum \left (\Delta_{\text{f}}H^{\circ} \text{reactants} \right)= \text{-393.5 kJ/mol - (-352.3 kJ/mol}\\= \text{-393.5 kJ/mol + 352.3 kJ/mol} = \textbf{-41.2 kJ/mol}\\ \text{The total enthalpy change is $\large \boxed{\textbf{-41.2 kJ/mol}}$}[/tex]
How to know number of proton/electron from ionisation energy?
also how to know ionisation energy from number of electron?
How to know group of element? (like Iodine - group 17)
Answer:
Ionization energy decreases from top to bottom in groups as the size of the atom becomes larger. For example, the first ionization energy of hydrogen is 1310 kJ mol⁻¹. The first ionization energy of lithium is 519 kJ mol⁻¹. Because lithium is a bigger atom and has more protons than hydrogen, its ionization energy is lower. So, in groups, the lower the ionization energy, the larger the atom and the more protons/electrons it has.
Ionization energy also increases from left to right across a period. The more protons in the nucleus, the greater the attraction between the nucleus and the electrons, which makes it more difficult to remove electrons. Helium has an ionization energy of 2370 kJ mol⁻¹ while hydrogen has an ionization energy of 1310 kJ mol⁻¹ because helium's nucleus has 2 protons attracting electrons instead of 1 like hydrogen. So for periods, the higher the ionization energy, the smaller the atom and the more protons/electrons it has.
Ionization energy is the energy required to remove an electron from its orbital around an atom. It increases across a period because the number of protons in the nucleus increases. This creates a stronger attraction between the nucleus and electrons, causing the electrons to be held tighter by the higher nuclear charge. Because the electrons are more difficult to remove, more energy is required which causes the ionization energy to be higher. So for periods, the more electrons the atom has, the higher the ionization energy. Ionization energy decreases down a group because the first electron removed is farther from the nucleus as the number of protons increases. Being farther away from the nucleus makes it easier for the electron to be pulled off as it is more loosely bounded, so less energy is required to remove the electron which causes the ionization energy to be lower. So for groups, the more electrons the atom has, the lower the ionization energy.
Groups are vertical columns going down on the periodic table. If you look at a periodic table, across the top, you will see the numbers 1-18. Those numbers signify the 18 groups of the periodic table. Iodine is a halogen so it is under Group 17 to the far right of the periodic table.
I attached two periodic tables for reference to everything that I've said as I've written a lot. Hope that helps.
Earth’s outermost layer is separated into a dozen or more large and small slabs, called _______. A. continental crust B. tectonic plates C. granite slabs D. Pangea
Answer:
Tectonic Plates
Explanation:
Answer:
Tectonic plates
Explanation:
Select the correct answer.
Which of these conditions would most likely cause a decrease in the population of any species?
ОА.
increased competition for resources
improved access to mates
OC.
elimination of predators
OD
decrease in pathogens
Answer(A increased competition for resources
Hope you get it right have a nice day
Answer:
A. increased competition for resources
Explanation:
List four examples of diffusion seen in daily life.
Answer:
Spraying perfume in one corner of the room and the smell travels to the other side of the room
Explanation:
Which of these elements have the smallest 1st ionization energy
Answer:
Ionization energy increases as you go across a period, and increases as you move up a group. So, elements with the smallest ionization energy would be at the bottom left corner of the periodic table. Examples of elements with small ionization energy: Francium (Fr), Cesium (Cs), Radium (Ra).
A current is induced in a wire by moving the wire through a magnetic field. Which is one factor that affects the direction of the current?
Answer:
One factor that affects that affects the direction of the current is the direction of motion of the wire
Explanation:
According to Fleming's right hand rule when a conductive wire which is within a circuit is moved through a magnetic field, due to Faraday's law of electromagnetic induction an electric current is induced in the wire such that the direction of motion of the wire, the direction of the magnetic field and the direction of the electric current are perpendicular to each other such that if the right hand has the thumb middle finger and the index finger held perpendicular to each other
The motion of the wire being in the direction of the wire
The first or index finger points in the direction of the magnetic field
The middle finger points in the direction of the induced electric current
Therefore, the direction of the the current depends on the direction of motion of the wire.
according to Bohr atomic model
Answer:
A small positively charged nucleus surrounded by revolving negatively charged electrons in fixed orbits
Ethylene, a gas found in nature, is commonly used to ripen bananas and other fruits. Which compound is ethylene?
H2C — CH2
НО
НО
Н
Н
0
С — С
Н
Н
ОН — СЕ С — Н
Answer:
C2H4
Explanation:
cause the compound of ethylene is C2H4
Ethylene is a hydrocarbon gas with the chemical formula C₂H₄. It is a simple molecule that consists of two carbon atoms and four hydrogen atoms and is also known as ethene. The skeletal structure is CH₂=CH₂.
What is ethylene ?Ethylene is a colorless and odorless gas that is the simplest member of the olefin class of hydrocarbons, with the chemical formula C₂H₄. It is an important organic compound and is widely used in industry.
Ethylene is primarily used to produce polyethylene, which is one of the most common plastic materials in the world. It is also used as a fuel in some industrial processes, as a refrigerant, and as a precursor to other chemicals.
It is an important plant hormone and is involved in various physiological processes such as fruit ripening, senescence, and abscission. Ethylene is naturally produced by plants, but it can also be produced artificially and is commonly used in agriculture to ripen fruits and vegetables.
Thus, the ethylene compound is CH₂=CH₂.
Find more on ethylene:
https://brainly.com/question/14797464
#SPJ7
How do gases responsible for acid rain get into the atmosphere
If a had a number that was 12.47, what would be the answer rounded to 2 sig figs?
12
Explanation:
Look at the number directly after the number you want to keep. I'm your case you want to keep the first two numbers and the number directly after is 4 so there is no need to round up. Keep your 12 without a decimal.
2g of magnesium Oreo to excess dilute acid according to the equation Mg(s) + 2H (aq) --- Mg² (aq) + H2 (g) (Realitive atomic mass of Mg= 24, molar mass volume at room temperature and pressure = 24dm³) The volume of hydrogen, measured at room temperature I pressure, that is produced is A) 1000 cm³ B)1500 cm³ C) 2000 ³cm D) 24 000 cm³
Answer:
Option C. 2000 cm³.
Explanation:
We'll begin by calculating the number of mole in 2 g of Mg. This is illustrated below:
Molar mass of Mg = 24 g/mol
Mass of Mg = 2 g
Mole of Mg =?
Mole = mass /Molar mass
Mole of Mg = 2/24
Mole of Mg = 8.33×10¯² mole.
Next, we shall determine the number of mole of H2 produced from the reaction. This is illustrated below:
Mg(s) + 2H^+ (aq) —› Mg^2+(aq) + H2 (g)
From the balanced equation above,
1 mole of Mg reacted to produce 1 mole of H2.
Therefore, 8.33×10¯² mole of Mg will also produce 8.33×10¯² mole of H2.
Finally, we shall determine the volume of H2 produced. This is illustrated below:
1 mole of H2 occupy 24000 cm³ at room temperature and pressure.
Therefore, 8.33×10¯² mole of H2 will occupy = 8.33×10¯² x 24000 ≈ 2000 cm³ at room temperature and pressure.
Therefore, 2000 cm³ of H2 were obtained from the reaction.
what kind of a compounds act as an electrolyte? explain with and example
Answer:
ionic compounds
Explanation:
just finished ap chem
Answer:
An ionic compound can act as an electrolyte. This is because an electrolyte should allow charges to travel inside it.
e.g = H2SO4, NaCl
Explanation:
HELPSS!
Isopropyl alcohol has a density of 0.785g/ml at 25°C. How much is contained in a 150ml sample of this alcohol?
Answer:
The amount of isopropyl alcohol contained in 150 ml of the solution is 117.15 grams
Explanation:
The density of a substance is the mass per unit volume, therefore, we have;
The density of the isopropyl alcohol = 0.785 g/ml at 25°C
The density = mass/volume
Mass = Density × Volume
The mass of the 150 ml of isopropyl alcohol is therefore;
Mass = 0.785 g/ml × 150 ml = 117.15 g
The amount in grams contained in 150 ml of sample = 117.15 g.
What is the precipitate in the following reaction?
2AgNO3(aq) + Na2S(aq) → Ag2S(s) + 2NaNO3(aq)
Answer:
2Ag(+1)(aq) + S(-2)(aq) --> Ag2(+1)S(-2)(aq)
Explanation:
The final equation is
2Ag(+1)(aq) + S(-2)(aq) --> Ag2(+1)S(-2)(aq)
2Ag(+1)NO3(-1)(aq) + Na2(+1)S(-2)(aq) --> Ag2(+1)S(-2)(s) + 2Na(+1)NO3(-1)(aq)
AgNO3, Na2S, and NaNO3 are all strong electrolytes, so we immediately separate those, making the new equation:
2Ag(+1)(aq) + 2NO3(-1)(aq) + 2Na(+1)(aq) + S(-2)(aq) --> Ag2(+1)S(-2)(s) + 2Na(+1)(aq) + 2NO3(-1)(aq)
After that, you cancel out all the ions that appear more than once, which in this case would leave us with a final equation of...
2Ag(+1)(aq) + S(-2)(aq) --> Ag2(+1)S(-2)(aq)
Answer:
Explanation:
C
The steady state vital to life is possible because:________
a. the cell cannot convert energy from one form to another.
b. all cells are autotrophic.
c. all reactions are exothermic.
d. the cell continually takes up energy from the environment.
e. all reactions are at equilibrium.
Answer: The correct answer is e) all reactions are at equilibrium.
Explanation: In order for cellular vitality to develop, it is necessary for it to be in energetic balance with the environment, that is, to give and receive energy with the environment that surrounds it through endothermic or exothermic reactions. That is why the development of life is considered a system that constantly exchanges with the environment. In turn, that the cell unit maintains a balance with the environment causes homeostasis to occur among the whole organism.
D Serum Levels Of 4 Mcg/mL, Calculate The Dose, In Milligrams, For A 120-lb Patient That May Be Expected To Result In A Blood Serum Gentamicin Level Of 4.5 Mcg/mL. This problem has been solved! See the answer If the administration of gentamicin at a dose of 1.75 mg/kg is determined to result in peak blood serum levels of 4 mcg/mL, calculate the dose, in milligrams, for a 120-lb patient that may be expected to result in a blood serum gentamicin level of 4.5 mcg/mL.
Answer:
The patient requires a dose of 107.2 mg of gentamicin
Explanation:
A dosage of 1.75 mg per Kilogram body weight results in blood serum levels of 4.5 mcg/mL
This means that; 1.75 mg/ kg = 4.0 mcg/mL
Therefore, dosage of gentamicin in mg/kg that will result in 4.5 mcg/mL blood serum level = (1.75 mg/Kg * 4.5 mcg/mL) / 4.0 mcg/mL
Dosageof gentamicin = 1.97 mg/Kg
1-lb = 0.453592 Kg
Weight of 120-lb patient in Kg = 120 * 0.453592 = 54.43 Kg
Dose in mg required by patient = 1.97 mg/Kg * 54.43 Kg = 107.2 mg
Therefore, the 120-lb patient requires a dose of 107.2 mg of gentamicin to result in a blood serum level of 4.5 mcg/mL
write chemical equation for the following decomposition reactions. Aluminum oxide(s) decomposes when electricity is passed through it.
Answer:
2Al2O3 (l) ---> 4Al (l) + 3O2 (g)
Explanation:
The reaction is the electrolysis of aluminium oxide. It decomposes aluminium oxide (Al2O3) into aluminium metal (Al) and Oxygen (O2). In this process, aluminium oxide is molten (liquid state) so that ions can move to complete the electricity circuit.
Al2O3 (l) ---> Al (l) + O2 (g)
Balance the equation:
2Al2O3 (l) ---> 4Al (l) + 3O2 (g)
Name the layer where the pressure is 3.5 million atmospheres:
Answer:
The Inner Core
hope it was useful
stay at home stay safe
keep rocking
pls mark me as brani
........