1. In_____particles are in contact with each other.

Answer:

normanie tykohoukdh    kjdj jj jjd

Explanation:

the empirical chemical formula of X is CH4

Explanation:Step 1: Imagine you have a sample of compound weighing exactly . Multiply the mass of this sample by the mass percents to find the mass of each element in the sample

Step 2: Divide the mass of each element by the element's molar mass to find the moles of each element in the sample. Remember to round your answers to the correct number of significant digits.  

Step 3: Divide the moles of each element by the the smallest number of moles of any element to find the mole ratio of elements in the sample.  

Step 4: Multiply the mole ratio by the smallest whole number that changes it into a whole number ratio to find the atom ratio of elements in the sample.

Note that the result of each multiplication must equal a whole number only within measurement uncertainty.  

The measurement uncertainty in this calculation comes from the measurement uncertainty of the mass percents given in the question. The mass percents each have significant digits. That means each mass percent has some measurement uncertainty in the third significant digit, and only the first two significant digits can be considered completely reliable.  

In Step 1 you multiplied each mass percent by something with zero uncertainty (the exactly you assumed your sample weighed), in Step 2 you divided by a measurement with more than significant digits (the molar mass of the elements), and in Step 3 you divided by a measurement with the same number of significant digits (the least number of moles of any element in the compound). None of these steps added to the measurement uncertainty of your calculation.  

Therefore, the measurement uncertainty in the final result of all your calculations is determined by the measurement uncertainty in the original mass percents and will be in the third significant digit. That means the result of each of the final multiplication steps must equal a whole number only to within the first two significant digits.  

The whole numbers in the last column of the table are and .  

Answer:

Percent yield = 7.1%

Explanation:

The general reaction of the problem is:

Ca(OH)₂ + CO₂ → H₂O + CaCO₃

To solve this question we need to find theoretical yield using the amount of carbon dioxide added because:

Percent yield = Actual yield (3.22g) / Theoretical yield * 100

Theoretical yield is the maximum amount of product that could be obtained. To find it we need to convert the mass of CO₂ to moles. The moles of CO₂ = Moles of CaCO₃:

Moles CO₂ -Molar mass: 44.01g/mol):

20.0g * (1mol / 44.01g) = 0.454 moles CO₂ = Moles of CaCO₃ produced

Mass CaCO₃ = Theoretical yield -Molar mass: 100.09g/mol-:

0.454 moles * (100.09g / mol) = 45.5g of CaCO₃ = Theoretical yield.

Replacing:

Percent yield = 3.22g / 45.5g * 100

Answer: ummmmmm hmmmmm

Explanation:

Answer:

na2 co3

Explanation:

sodium carbonate formula

Answer:

your answer is C.

Explanation:

this is what it would be like

O

|

|

Na+ C Na+

/ \

/ \

O- O-

Answer:

The molecular formula of the hydrocarbon compound is C₈H₁₈

Explanation:

The type of chemical substance in the question = Hydrocarbon

The mass of the hydrocarbon = 5.7 g

The mass of carbon in the given hydrocarbon (sample) = 4.8 g

The relative molecular mas of the hydrocarbon = 114 g

Therefore, the mass of hydrogen in the sample, H = 5.7 g - 4.8 g = 0.9 g

The ratio of the mass of carbon in the sample = 4.8/5.7

The ratio of the mass of hydrogen in the sample = 0.9/5.7

By the law of constant composition, we have;

The mass of carbon in a mole of the hydrocarbon = (4.8/5.7) × 114 g = 96 g

The molar mass of carbon, C = 12 g/mol

The number of moles of carbon in a mole of the hydrocarbon, 'n₁', is given as follows;

n₁ = 96 g/12 g = 8 moles

The mass of hydrogen in a mole of the hydrocarbon = (0.9/5.7) × 114 g = 18 g

The molar mass of hydrogen, H ≈ 1 g/mol

The number of moles of hydrogen in a mole of the hydrocarbon, 'n₂', is given as follows;

n₂ = 48 g/1 g = 18 moles

Therefore, in each each molecule of the compound, we have have 8 atoms of carbon, 'C', and 18 atoms of hydrogen, 'H'

Therefore, we get;

The molecular formula of the hydrocarbon compound is C₈H₁₈ which is the chemical formula for the hydrocarbon also known as octane

Answer:

what is late ? there is no attachment ?

Answer:

For people asking for the questions

Explanation:

Answer:

I think the answer is Prokaryote and Eukaryote

Explanation:

Answer:

Wanning gibouss 56%

Explanation:

Answer:

0.0125mol

Explanation:

Molarity (M) = number of moles (n) ÷ volume (V)

n = Molarity × Volume

According to this question, a 0.05M solution contains 250 mL of NaOH. The volume in litres is as follows:

1000mL = 1L

250mL = 250/1000

= 0.250L

n = 0.05 × 0.250

n = 0.0125

The number of moles of NaOH is 0.0125mol.

Answer: A. dipole

Explanation:

Dipole can be defined as the separation of the equal and opposite charges present in the molecule via ionic bonding. The water molecule comprising of two molecules of hydrogen being positively charged and one molecule of oxygen being negatively charged are connected via ionic bonding thus water molecule is an example of dipole molecule. There is unequal distribution of the electrical density throughout the molecule.

The polar molecule results in a dipole when equal but opposite charges are present in two regions.

Dipole:  

Dipole arises when a molecule have opposite and equal charge in the ends.

For example - water molecule

In water molecule Oxygen is negatively charged and hydrogen have low electronegativity, this difference in electronegativities arise dipole in molecule.

Therefore, the polar molecule results in a dipole when equal but opposite charges are present in two regions.

To know more about Dipole,

https://brainly.com/question/18382778

Answer:

a)82.5 g

Explanation:

To solve this problem we will use Avogadro's number, which states the number of formula units per mole.

Then we convert 1.41 moles of NaCl to grams, using its molar mass:

The closest answer is option a).

Answer:

the second one

Explanation:

THE answers is b

Answer:

a.

[tex]K=\frac{[BaO]^2}{[Ba]^2[O_2]}[/tex]

b.

[tex]K=\frac{[MgO]^2}{[Mg]^2[O_2]}[/tex]

c.

[tex]K=\frac{[P_4O_{10}]^2}{[P_4][O_2]^5}[/tex]

Explanation:

Hello!

In this case, since the equilibrium expression is set up by dividing the products over the reactants and powering to the stoichiometric coefficient, we can proceed as follows:

a. 2 Ba + O2 ⇌ 2 BaO.

[tex]K=\frac{[BaO]^2}{[Ba]^2[O_2]}[/tex]

b. 2 Mg + O2 ⇌ 2MgO

[tex]K=\frac{[MgO]^2}{[Mg]^2[O_2]}[/tex]

c. P4 + 5 O2 ⇌ P4O10

[tex]K=\frac{[P_4O_{10}]^2}{[P_4][O_2]^5}[/tex]

Best regards.

Answer:

1.A 2.C 3.B

4. d

Explanation:

Answer:

no

Explanation:

Answer:

Effusion  is the process of a gas being poured out through a hole diametrically smaller than the structural exit of the container.

A lighter gas effuses faster than a heavier gas.

Thus gas A has a lower density and effuses slower than Gas B.

Explanation:

The gas with a lower molar mass will have a lower density and diffuses at a slower rate. Thus gas A has a lower density than gas B and diffuses slower than gas B.

Three points should be noted here;

Hence the gas A has lower density and the gas B has higher density as the molar mass of A is [tex]17 g/mol[/tex] and of B is [tex]36.5 g/mol[/tex].

About Diffusion please note the below points;

Hence the gas A diffuses slower in rate than gas B.

Thus the correct answer is "Gas A has a lower density and diffuses slower than Gas B".

Learn more about the density of gas here: https://brainly.in/questions/16376906

Answer:

Area of rectangular poster = [tex]\frac{3}{16}[/tex] yard²

Explanation:

P.S - The exact question is -

Given - A rectangular poster is [tex]\frac{1}{4}[/tex] yard wide and [tex]\frac{3}{4}[/tex] yard tall.

To find - What is its area ?

Proof -

We know that ,

The area of rectangle = Length × Breadth

Here,

Given that,

Length of rectangle = [tex]\frac{3}{4}[/tex] yard

Breadth of rectangle = [tex]\frac{1}{4}[/tex] yard

∴ we get

Area of rectangular poster = [tex]\frac{3}{4}[/tex] × [tex]\frac{1}{4}[/tex]  yard²

                                          = [tex]\frac{3}{16}[/tex] yard²

⇒Area of rectangular poster = [tex]\frac{3}{16}[/tex] yard²

Answer:Calcium carbonate (CaCO3), essentially, is an ionic compound having the bivalent calcium and carbonate ions. But the carbonate anion is a polyatomic species. The carbon atom is bonded to all the three oxygen atoms by covalent bonds - two carbon-oxygen single bonds and one carbon-oxygen double bond.

Explanation:So it's ionic hope this helps u. Btw may i have brainlist plz.

Answer:

Just 1 i.e., Option B.

Because except for top of the molecule, all other sides are filled with a letter meaning there is one free space.

Answer:

B

Explanation:

H .  +  H .   ----->  H:H            {":" represents a covalent bond, that is, a shared pair of electrons}

A Lewis structure is a convention used to represent the covalent bonding in a molecule.   Dots or lines are used to represent

valence electrons (electrons available for bonding).  The Lewis structure for the hydrogen molecule is as follows.

     H:H  or  H-H

A bonding pair is an electron pair shared between two atoms.

A nonbonding pair (lone pair, unshared pair) is a pair of electrons that remains on one atom and is not shared.

Answer: Image result for What does Boyle's Law describe?

This empirical relation, formulated by the physicist Robert Boyle in 1662, states that the pressure (p) of a given quantity of gas varies inversely with its volume (v) at constant temperature; i.e., in equation form, pv = k, a constant.

Explanation:

Answer:

true ........

hope it is helpful

Answer:

1200g H20.

Explanation:

Write out the balanced equation... when an organic compound is burned, like C2H2, it is burned in oxygen (O2) and produces Water and Carbon Dioxide (CO2)

so 2C2H2 + 5O2  =  2H2O  + 4CO2

now that you have a balanced equation just convert to moles and solve

2000g C2H2 * 1mol C2H2 / 30gC2H2 * 2mol H2O/2mol C2H2 * 18gH2O/1molH20 = 1200g H20.

Answer:

When the Moon is in the position shown below, how would the Moon look to an observer on the North Pole ... The moon's rotational period is equal to its revolutional period around Earth.

Explanation:

Answer:

(102 900 ÷ 12) + (170 × 1.27) = 8800

Step 1. Evaluate the expressions inside the parentheses (PEMDAS)

102 900 ÷ 12 = 8575

170 × 1.27 = 215.9

In multiplication and division problems, your answer can have no more significant figures than the number with the fewest significant figures.

Thus, the underlined digits are not significant, but we keep them in our calculator to avoid roundoff error.

Step 2. Do the addition (PEMDAS).

  8575

+    215.9

= 8790.9

Everything that you add to an insignificant digit gives an insignificant digit as an answer.

Thus, the underlined digits are not significant.

We must drop them and round up the answer to 8800.

Explanation:

Answer:

Pb(NO3)2(aq) + 2NaCl(aq) -> 2NaNO3(aq)+PbCl2(s)

Explanation:

Pb(NO3)2(aq)+NaCl(aq) -> NaNO3(aq)+PbCl2(s)

This is how it starts out.

Left:

Right

So the place to start with this equation is to bring the Cls up to 2

Pb(NO3)2(aq)+2NaCl(aq) -> NaNO3(aq)+PbCl2(s)

But the Nas are now out of kilter.

Pb(NO3)2(aq)+ 2NaCl(aq) -> NaNO3(aq)+PbCl2(s)

Now the right has a problem. There's only 1 Na

Pb(NO3)2(aq) + 2 NaCl(aq) -> 2NaNO3(aq)+PbCl2(s)

Check it out. It looks like we are done.