Answer:
0.625 m/s
General Formulas and Concepts:
Unit 0
SI unit (distance) - metersSI unit (time) - secondsKinematics
Average Speed Formula: [tex]\displaystyle \frac{total \ distance}{time}[/tex]Explanation:
Step 1: Define
[Given] Initial speed: 15 km/h
[Given] Final speed: 60 km/h
[Given] time: 20 s
[Solve] Average speed
Step 2: Convert
Initial speed
Set up conversion: [tex]\displaystyle \frac{15 \ km}{h}(\frac{1000 \ m}{1 \ km})(\frac{1 \ hr}{60 \ min})(\frac{1 \ min}{60 \ s})[/tex]Multiply/Divide [Cancel out units]: [tex]\displaystyle \frac{25}{6} \ \frac{m}{s}[/tex]Final speed
Set up conversion: [tex]\displaystyle \frac{60 \ km}{h}(\frac{1000 \ m}{1 \ km})(\frac{1 \ h}{60 \ min})(\frac{1 \ min}{60 \ s})[/tex]Multiply/Divide: [tex]\displaystyle \frac{50}{3} \ \frac{m}{s}[/tex]Step 3: Solve
Set up: [tex]\displaystyle \frac{\frac{50}{3} \ \frac{m}{s} - \frac{25}{6} \ \frac{m}{s}}{20 \ s}[/tex]Subtract: [tex]\displaystyle \frac{\frac{25}{2} \ \frac{m}{s}}{20 \ s}[/tex]Divide: [tex]\displaystyle \frac{5}{8} \ \frac{m}{s}[/tex]What is the impulse required to stop a 4.8 kg mass traveling at 18.9 m/s?
Report your answer to 1 decimal place.
Answer:
MASS=4.8KG
VELOCITY= 18.9
Put into the formula.
Explanation:
Impulse= Mass* change in velocity, it gives you everything you need to input it into the formula
PLEASE ILL GIVE BRAINLIST Which term describes the high point of a transverse wave?
O A. Crest
O B. Compression
O C. Rarefaction
O D. Trough
Answer:
I belive that the answer is the A
Crest describes the high point of a transverse wave. Therefore, the correct option is option A.
Transverse waves are those which oscillate in directions that are opposite to the wave's forward motion. Electromagnetic radiation, seismic waves, or water surface ripples are all examples of transverse waves.
A simple transverse wave can be represented by a sine or cosine curve because any point's amplitude—that are, its distance from the axis—is proportional to the sine (or cosine) associated with that angle. Crest describes the high point of a transverse wave.
Therefore, the correct option is option A.
To know more about transverse wave, here:
https://brainly.com/question/13863548
#SPJ7
1.Mention two uses of the concave mirror.
1.Discuss the theory of the two methods of determining focal length (f).
Answer:
1. telescope
2.
[tex]f = \frac{r}{2} [/tex]
[tex]f = \frac{r}{2} [/tex]f- focal length
[tex]f = \frac{r}{2} [/tex]f- focal length r- the radius of curvature of the mirror
[tex] \frac{1}{f} = \frac{1}{p} + \frac{1}{l} [/tex]
p-the distance of the object from the vertex of the mirror
l-the distance of the figure from the vertex of the mirror
mc2
Describe the process of nuclear fission and how the famous equation E
relates to this process.
frfyuegffffjhAnswer:
frjhgfjgresjytgfejygfjse
Explanation:
g Two identical toy cars are held at rest on top of identical ramps. Car A rolls down the ramp, through a loop and then moves along a horizontal surface. Car B starts from rest at the same height, but it does NOT complete the loop. It is found that Car B has a faster speed at the finish line than Car A. What is the BEST explanation for why
Answer:
The kinetic energy of Car B is greater than the kinetic energy of Car A at the finish line.
Explanation:
Both objects have the same kinetic energy at the bottom of the ramp since the ramps are identical. Since Car A passes through the loop, it losses kinetic energy before it gets to the horizontal road and thus decreasing its speed. Car B does not go through the loop so its speed as it gets to the horizontal surface is its speed at the bottom of the ramp.
As both cars move on the horizontal surface, their speed decrease further but since Car B starts with a greater speed than Car A on the horizontal surface, it will end with a greater speed than Car A at the finish line.
This is because, the kinetic energy of Car B is greater than the kinetic energy of Car A at the finish line.
What do all magnets have in common? Select all that apply.
magnetic domains are aligned
magnetic domains are not aligned
movement of protons creates a magnetic field
all magnets have opposite poles ( a North pole and South pole)
movement of electrons creates a magnetic field
moving electrons generate magnetic fields
Answer:
all magnets have opposite poles (north and south)
magnetic domains are aligned
moving electrons generate a magnetic filed
movement of electrons creates a magnets field
What does the transfer of energy have to do with natural disasters?
Answer: When an earthquake occurs energy is transferred, from where the rocks break, and travels throughout the world. The bigger the quake the further from the epicentre the waves will travel. There are four types of earthquake wave generated during an earth quake
Explanation:
The intensity of a natural disaster can be determined by the amount of energy transferred due to it.
What is meant by natural disaster ?Natural disasters include calamities with atmospheric, geological, and hydrological causes (such as droughts, earthquakes, floods, hurricanes, and landslides), which can result in fatalities, property damage, and social and environmental disturbance.
Here,
Internal and external forces work together to create natural disasters. The first is internal forces that are caused by the earth's internal heat energy and result in geologic hazards including earthquakes, volcanoes, and tsunamis.
Energy is transferred during an earthquake and propagates throughout the globe from the point at which the rocks split. The waves' distance from the epicenter increases with the size of the earthquake.
During an earthquake, four different kinds of seismic waves are produced. They transfer energy out of the earthquake's epicentre.
Hence,
The intensity of a natural disaster can be determined by the amount of energy transferred due to it.
To learn more about natural disaster, click:
https://brainly.com/question/31874791
#SPJ2
PlZ help
Why is it advantageous for a boxer to ride with the punch? Why should he avoid moving
into an oncoming punch?
In one cycle of any heat engine
A. the net work done is larger than the heat exhausted.
B. more heat flows from the engine than enters the engine.
C. The internal energy of the engine does not change.
D. the net heat flow is zero.
All of the following are characteristics of a laser diode except
Answer:
D
Explanation:
Given that all of the following are characteristics of a laser diode except
Solution.
A laser diode emit light of a single colour. That is, it emits a monochromatic light in which the light emitted monochromatically will definitely be coherent. That is, a light with a single wavelength emitted by a wide wavelength.
Also, all diode have positive and negative junction which is known as pn junction.
The incorrect among all the options is option D which is the answer.
The definition that best describes invention is:
Your answer:
Invention is the first product produced on an assembly line
Invention is having a desired goal to achieve something
Invention is changing the size of an existing product
Invention is a process of turning ideas into devices or systems
Answer: Invention is a process of turning ideas into devices or systems.
Explanation:
Invention is a process of turning ideas into devices or system. Invention, simply has to do with bringing of ideas together so as to create something unique.
It should be noted that without creativity, invention can't take place. Examples of invention include the light bulb, fans etc. They are products that were designed based on the ideas that someone had Wich was turned into a device.
A 2.60 kg lion runs at a speed of 5.00 m/s until he sees his prey. The lion then speeds up 8.00 m/s to catch it. How much work did do after he speeds up?
Answer: 50.7 J
Explanation:
Given
mass of lion is [tex]m=2.6\ kg[/tex]
The initial speed of the lion is [tex]v_1=5\ m/s[/tex]
increased speed of lion is [tex]v_2=8\ m/s[/tex]
Initially, its kinetic energy is [tex]K_1=\frac{1}{2}mv_1^2[/tex]
Final kinetic energy [tex]k_2=\frac{1}{2}mv_2^2[/tex]
work did by lion after speed up is [tex]k_2-k_1[/tex]
[tex]\Rightarrow W=\dfrac{1}{2}\times 2.6[8^2-5^2]\\\\\Rightarrow W=1.3\times [39]=50.7\ J[/tex]
If the force of gravity changes what will happen and what would cause it to change?
what is the main cause of the seasons
Fossil fuels can be replaced.
Yet, they are considered
nonrenewable. Why?
A. Fossil fuels only take a few years to
replenish.
& Dirt
al
B. Fossil fuels take millions of years to
replenish.
C. Fossil fuels can never be replenished.
Silt
Why can’t human males be carriers for sex linked (x-linked) disorders?
Answer:
This is because the X chromosome is large and contains many more genes than the smaller Y chromosome. In a sex-linked disease, it is usually males who are affected because they have a single copy of X chromosome that carries the mutation.
Explanation:
A boy weighs 50 kg and is running with 225 J of energy, what is his velocity?
Look for factors that will help you determine what type of economy exists in Country C. What type of economy does Country C have? developed developing transitioning command
Answer:
C.) transitioning
Explanation:
Look for factors that will help you determine what type of economy exists in Country C is a transitioning economy.
What is economy transition?The transition economy or economy in transition is an economy that is changing from centrally planned to free market. These submit to Liberalism, where market forces are prices, rather than a centrally planned organization.
For these reasons we can say that the economy of country C is a transition economy.
See more about economy at brainly.com/question/2421251
#SPJ2
I need help please!!!!!!!!!!!
Answer:
correct answer is rapid city
A car starts from rest and reaches a speed of 25m/s in 4 seconds. What is the acceleration?
Also, Calculate the distance the object traveled,
Can y’all help me with this one
Answer:
a = 6.25 m/s/s
d = 50 m
Explanation:
Given:
v1 (initial velocity)= 0 m/s (cz its at rest)
v2 (final velocity)= 25 m/s
t = 4s
a = ?
d = ?
to determine acceleration
a = (v2 - v1)/ t
= (25m/s - 0m/s)/4s
= 6.25 m/s/s
to determine distance traveled
d = 1/2(v1 + v2)t
=1/2(0m/s+25m/s)(4s)
=50 m
Answer:
Answer in explanation.
Explanation:
Using Equation
[tex]v = u + at[/tex]
where v is the final velocity
u is initial velocity
a is acceleration
t is time taken
given u = 0, v = 25, t = 4,
[tex]25 = 0 + 4a \\ 4a = 25 \\ a = 6.25 \frac{m}{ {s}^{2} } [/tex]
Now, using equation
[tex]v {}^{2} = {u}^{2} + 2as[/tex]
where v and u remains the same, a = 6.25 and s is the distance,
[tex](25) {}^{2} = \: {0}^{2} + 2(6.25)s \\ 12.5s = 625 \\ s = \frac{625}{12.5} \\ s = 50m[/tex]
A 16 lb weight stretches a spring 6 inches in equilibrium. It is attached to a damping mechanism with constant c. Find all values of c such that the free vibration of the weight has infinitely many oscillations.
Answer:
[tex]-8<c<8[/tex]
Explanation:
Given data:
Weight W = 16 lb
length l = 6/12 = 0.5 ft
hence, spring constant k = W/l = 16/0.5 = 32 lb/ft
The equation of motion of spring is
[tex]mx''+cx+kx=0\\0.5x''+cx'+32x=0[/tex]
the auxiliary equation can be written as
[tex]0.5r^2+cr+32=0\\r^2+2cr+64=0[/tex]
The discriminate of equation is
[tex]D =(2c)^2+-4(1)(64)\\=4(c^2-64)[/tex]
To get the value of the damping constant,
[tex]D<0\\4(c^2-64)<0\\c>-8, c<8\\-8<c<8[/tex]
what Sport is similar to Ulama
what is motion wave?
Answer:
Wave motion is the transfer of energy and momentum from one point of the medium to another point of the medium without actual transport of matter between two pointsxplanation:
*please help fast**15 points*
How is laser light different from the light produced by a flashlight?
A. The crests of laser light waves align with one another.
B. Lasers produce multiple wavelengths of light.
C. Lasers produce light that is incoherent
D. Flashlights use reflecting mirrors and lasers do not.
Answer:
B.
Explanation:
Laser light is different from normal light in other ways as well. First, its light contains only one wavelength (one specific color). ... Whereas a laser generates a very tight beam, a flashlight produces light that is diffuse. Because laser light is coherent, it stays focused for vast distances, even to the moon and back
A constant applied force Fp of 11.0 N pushes a box with a mass=7 kg a distance x=15.0 m across a level floor. The coefficient of kinetic friction between the box and the floor is .110. Assuming the box starts from the rest, what is the final velocity vf of the box at 15.0 m point? If there were no friction between the box and the floor, what applied force Fnew would give the box the same final velocity?
We have that for the Question " constant applied force Fp of 11.0 N pushes a box with a mass=7 kg a distance x=15.0 m across a level floor. The coefficient of kinetic friction between the box and the floor is .110." it can be said that
the final velocity vf is
[tex]vf=3.83m/s[/tex]
and the applied force Fnew is
[tex]F_{new}=3.43N[/tex]
From the question we are told
A constant applied force Fp of 11.0 N pushes a box with a mass=7 kg a distance x=15.0 m across a level floor. The coefficient of kinetic friction between the box and the floor is .110. Assuming the box starts from the rest, what is the final velocity vf of the box at 15.0 m point? If there were no friction between the box and the floor, what applied force F new would give the box the same final velocity?
Generally the equation for the Force is mathematically given as
F_p-\mu mg=ma
Therefore
11-0.110*7*9.8=7*a
a=0.49m/s^2
Using Newtons equation
v^2=u^2+2as
v^2=0+2*0.49*15
v=3.83m/s
Therefore
F=ma
F=0.49*7
F_{new}=3.43N
Therefore
the final velocity vf is
[tex]vf=3.83m/s[/tex]
and the applied force Fnew is
[tex]F_{new}=3.43N[/tex]
For more information on this visit
https://brainly.com/question/23379286
equivalent resistance:
What is the equivalent resistance between points P & Q?
(None of the resistors are the same and the wires are without resistors.)
Answer:
equivalent register what is the equivalent resistance between points P and Q no knows registers are the same and the virus faila
According to Newton’s second law of motion, weight depends on an object’s mass and the net force acting on the object. True or false
Answer:
true..
Explanation:
Newton's 2nd law of motion is greater the mass of an object the more force it will take to accelerate the object
According to Newton’s second law of motion, weight depends on an object’s mass and the net force acting on the object. The given statement is true.
What is force?Force is defined as the push or pull applied to the body. Sometimes it is used to change the shape, size, and direction of the body.
The following equation help to understand the statement;
Force is defined as the product of mass and acceleration. Its unit is Newton.
F=ma
F=mg
W=mg
The weight of an item is determined by its mass and the net force exerted on it, according to Newton's second rule of motion. The provided assertion is correct.
Hence,the given statement is true.
To learn more about the force, refer to the link;
https://brainly.com/question/26115859
#SPJ2
The statement "if I raise the temperature of
a cup of water, then an increased amount of
sugar will be dissolved" is an example of
A. an observation
B. a hypothesis.
C. a theory
a piece of clay with mass m is traveling with an unknown velocity in the positive x-direction, when it collides and sticks to a block of mass 3m, moving with velocity v=-3m/s. after the collision, the block and clay are stuck together and traveling with a velocity of 1 m/s in the negative x-direction. what was the original velocity of the clay mass?
Answer:
13 m in the + x direction.
Explanation:
Givens
m1 = m
m2 = 3m
v1= ? = x
v2 = - 3 m/s
v3 = v4 = - 1 m/s
Equation
Let x be the speed of the lighter object before collision.
Momentum before collision = momentum after collision
Solution
mx - 3m * 3m/s = (m1 + m2)*(-1)
m(x - 3*3m/s) = (m + 3m)(-1)
m(x - 9) = - 4m Cancel the ms
x - 9 = 4 Add 9 to both sides
x = 9 + 4
x = 13 m/s
What are the features of nanotechnology?
Answer:
Characteristics of Nanotechnology
Explanation:
Nanotechnology deals with putting things together atom by atom and with structures so small they are invisible to the naked eye. It provides the ability to create materials, devices and systems with fundamentally new functions and properties