1. The uniform seesaw is balanced at its center of mass. The smaller boy on the right has a mass of m = 40.0 kg. What is the mass of his friend?

Answer:

Explanation:

The acceleration of an object given it's mass and the force acting on it can be found by using the formula

[tex]acceleration = \frac{force}{mass} \\[/tex]

From the question

force = 20 N

mass = 4 kg

We have

[tex]a = \frac{20}{4} \\ [/tex]

We have the final answer as

Hope this helps you

Answer:

The time is 1.4 sec

The initial velocity is 10.7 m/s.

Explanation:

Given that,

Height = 10 m

Distance = 15 m

We need to calculate the time

Using equation of motion

[tex]s=ut-\dfrac{1}{2}gt^2[/tex]

Put the value into the formula

[tex]10=0+\dfrac{1}{2}\times9.8\times t^2[/tex]

[tex]t^2=\dfrac{2\times10}{9.8}[/tex]

[tex]t=\sqrt{\dfrac{2\times10}{9.8}}[/tex]

[tex]t=1.4\ sec[/tex]

We need to calculate the initial velocity

Using formula of velocity

[tex]v=\dfrac{d}{t}[/tex]

Put the value into the formula

[tex]v=\dfrac{15}{1.4}[/tex]

[tex]v=10.7\ m/s[/tex]

Hence, The time is 1.4 sec

The initial velocity is 10.7 m/s.

Answer:

[tex]A. \: A \: series \: circuit[/tex]

Explanation:

♨Rage♨

Answer:

  C.  A parallel circuit

Explanation:

Adding a bulb in parallel with the existing bulb will apply the same voltage to both bulbs. They will light equally bright.

You would design a parallel circuit.

_____

In a series circuit the same current would flow in both bulbs, but that current would be at half the original current level. Both bulbs would be dimmer than the first bulb was.

It is difficult to create a "complex" circuit with only two components. An "incomplete" circuit would result in no light at all.

Answer:

Explanation:

Given parameters:

Initial velocity = 0

Acceleration = 11m/s²

Time  = 6s

Unknown:

Final velocity  = ?

Solution:

 From the given parameters, we use one of the appropriate equations of motion to solve this problem.

     V = U + at

V is the final velocity

U is the initial velocity

a is the acceleration due to gravity

t is the time taken

Input the parameters and solve;

     V  = 0 + 11 x6

     V  = 66m/s

The final velocity is 66m/s

Answer:

milliliters (ml)

Explanation:

millileters is the correct measurement for liquids

Explanation:

because of the acceleration due to gravity is constant which is 9.8

Answer:

TRUE

Explanation:

CUZ , IT DOSEN'T AFFECT

Mass does not affect the speed of falling objects, assuming there is only gravity acting on it. Both bullets will strike the ground at the same time.

Answer:

potential energy

Explanation:

By cooling down the food, the thermal energy in the food molecules is reduced.

A refrigerator is an appliance that is commonly used in the home for the purpose of cooling down a substnace especially water and drinks.

Due to the fact that the molecules that compose matter are is in a state of constant random motion, the food molecules contain thermal energy. Hence, by cooling down the food, the thermal energy in the food molecules is reduced.

Learn more about thermal energy: https://brainly.com/question/11278589

Answer:

D

Explanation:

Answer:

electrical energy transforming into sound energy in speaker

Answer:

the first one. Electrical energy transforming into sound energy in a speaker

Answer:

The final speed of the block moving at the instant the spring has been compressed is approximately 3.674 meters per second.

Explanation:

The spring constant is 2000 newtons per meter. Let consider the spring-block system, from Principle of Energy Conservation we can represent it by the following model:

[tex]U_{k,1}+K_{1} = U_{k,2}+K_{2}[/tex]

[tex]K_{2} = K_{1}+(U_{k,1}-U_{k,2})[/tex] (Eq. 1)

Where:

[tex]K_{1}[/tex], [tex]K_{2}[/tex] - Initial and final kinetic energies of the block, measured in joules.

[tex]U_{k,1}[/tex], [tex]U_{k,2}[/tex] - Initial and final elastic potential energy, measured in joules.

And we expand the equation above by definitions of elastic potential energy and kinetic energy:

[tex]\frac{1}{2}\cdot m \cdot v_{2}^{2} = \frac{1}{2}\cdot m\cdot v_{1}^{2} + \frac{1}{2}\cdot k\cdot (x_{1}^{2}-x_{2}^{2})[/tex]

[tex]v_{2} = \sqrt{v_{1}^{2}+\frac{k}{m}\cdot (x_{1}^{2}-x_{2}^{2}) }[/tex] (Eq. 1b)

Where:

[tex]m[/tex] - Mass of the block, measured in kilograms.

[tex]k[/tex] - Spring constant, measured in newtons per meter.

[tex]v_{1}[/tex], [tex]v_{2}[/tex] - Initial and final velocities of the block, measured in meters per second.

[tex]x_{1}[/tex], [tex]x_{2}[/tex] - Initial and final positions of spring, measured in meters.

If we know that [tex]v_{1} = 6\,\frac{m}{s}[/tex], [tex]k = 2000\,\frac{N}{m}[/tex], [tex]m = 2\,kg[/tex], [tex]x_{1} = 0\,m[/tex] and [tex]x_{2} = 0.15\,m[/tex], the final speed of the block moving at the instant the spring has been compressed is:

[tex]v_{2} = \sqrt{\left(6\,\frac{m}{s} \right)^{2}+\left(\frac{2000\,\frac{N}{m} }{2\,kg} \right)\cdot [(0\,m)^{2}-(0.15\,m)^{2}]}[/tex]

[tex]v_{2}\approx 3.674\,\frac{m}{s}[/tex]

The final speed of the block moving at the instant the spring has been compressed is approximately 3.674 meters per second.

Answer:

According to the University of Iowa, the average length of a stride is 5ft.

Now, the total distance of the marathon is:

26mi and 385yd.

Let's transform that distance into ft.

1mi = 5280ft

Then:

26mi = 26*5280ft = 137,280ft

1yd = 3ft

then:

385yd = 385*3ft = 1,155ft.

Then the total distance of the marathon, in ft, is:

D = 137,280ft + 1,155ft = 138,435 ft.

Now the average number of strides needed will be equal to the quotient between the total distance of the marathon and the distance traveled in each stride.

N = 138,435ft/5ft = 27,687.

Answer:

2.096m/s

Explanation:

The speed of this soccer ball can be calculated using the formula;

Speed = distance/time

According to this question, the distance of the ball before it hits the tree is 6.5m, the time it takes is 3.1s, hence;

Speed = 6.5/3.1

Speed of the ball = 2.096m/s

Therefore, the speed of the ball before hitting the tree is 2.096m/s

Answer: 11400 m

Explanation:

Given:

t = 3.8 x 10^-5 s

v = 3 x 10^8 m/s

d = ?

Formula:

d = vt

  = (3.8 x 10^-5 s)(3 x 10^8 m/s)

  = 11400 m

hope this helps :)

The uniform movement allows to find the results for the distance from the radar to the plane is: 5.7 10³ m or 5.7 km

Kinematics studies the motion of objects looking for relationships between position, velocity and acceleration, in the special case that the acceleration is zero is called uniform motion and is described by the expression

                [tex]v = \frac{d}{t}[/tex]

                d = v t

Where v is the velocity, d the displacement and t the time.

Radar waves are electromagnetic waves with constant velocity

            v = 3 10⁸ m/s

They indicate that the time of the waves to go to the plane and return is 3.8 10⁻⁵ s, therefore if the speed is constant, the time to reach the plane is half of the total time.

          t = [tex]\frac{t_{total} }{ 2}[/tex]

          t = [tex]\frac{3.8 \ 10^{-5}}{2}[/tex]  

          t = 1.9 10⁻⁵ s

Let's calculate

        d = 3 10⁸ 1.9 10⁻⁵

        d = 5.7 10³

In conclusion with the uniform movement we can find the results for the distance from the radar to the plane is: 5.7 10³ m or 5.7 km

Learn more here: brainly.com/question/20369552

Answer:

ns for high-speed rail in the United States date back to the High Speed Ground Transportation Act of 1965. Various state and federal proposals have followed. Despite being one of the world's first countries to get high-speed trains (the Metroliner service in 1969), it failed to spread. Definitions of what constitutes high-speed rail vary, including a range of speeds over 110 mph (180 km/h) and dedicated rail lines. Inter-city railwith top speeds between 90 and 125 mph (140 and 200 km/h) is sometimes referred to in the United States as higher-speed rail.[1]

Amtrak's Acela Express (reaching 150 mph, 240 km/h), Silver Star, Northeast Regional, Keystone Service, Vermonter and certain MARC Penn Line express trains (all five reaching 125 mph, 201 km/h) are the only high-speed services in the country.

As of 2020, the California High-Speed Rail Authority is working on the California High-Speed Rail project and construction is under way on sections traversing the Central Valley. The Central Valley section is planned to open in 2029 and Phase I is planned for completion in 2031.[2]

Contents

1 Definitions in American context

2 History

2.1 Faster inter-city trains: 1920–1941

2.2 Post-war period: 1945–1960

2.3 First attempts: 1960–1992

2.4 Renewed interest: 1993–2008

2.5 Plans for 2008–2013

3 Current state and regional efforts

3.1 The Northeast

3.1.1 Northeast Corridor: Next Generation High-Speed Rail

3.1.1.1 Proposed routes

3.1.2 Northeast Maglev proposal

3.1.3 New Jersey–New York City upgrades

3.1.4 New York

3.1.5 Pennsylvania

3.2 Western States

3.2.1 California

3.2.2 Pacific Northwest

3.2.3 Arizona

3.3 Mid-Atlantic and the South

3.3.1 Florida

3.3.2 Southeast

3.3.3 Texas

3.4 Midwest

3.4.1 Illinois and the Midwest

3.5 The Southwest

4 Federal high-speed rail initiatives

4.1 American Recovery and Reinvestment Act of 2009

4.1.1 Strategic plan

4.2 2009 federal grant funding

4.3 2010 allocation

4.3.1 Cancellation of funds for Wisconsin, Ohio, and Florida

4.4 2011 and 2012 proposals and rejections of funding

5 See also

6 Notes

7 Further reading

8 External links

Explanation:

Answer:

* when L → H    chord too long

in this case we see that the speed to cross the well grows a lot (it goes towards infinity) therefore we do not have enough speed in the movement to cross

* when L → 0 very short string

         the speed of the platform is very small, so we do not have the minimum required value

        vox = √ (g / (2 (H)) D

Explanation:

For this exercise we are going to solve it using conservation of energy to find the velocity of the body and the launch of projectiles to find the velocity to cross the well.

Let's start with the projectile launch

as the body leaves the vertical its velocity must be horizontal

         x = v₀ₓ t

         y = y₀ + [tex]v_{oy}[/tex] t - ½ g t²

when reaching the ground its height of zero (y = 0) and the initial vertical velocity is zero

         t = √ 2 y₀ / g

we substitute

        x = vox √2y₀ / g

        v₀ₓ = √(g / 2y₀)     x

In the exercise, it tells us that the width of the well is D (x = D) and the initial height is the height of the platform minus the length of the rope (I = H - L)

       v₀ₓ = √(g /(2 (H -L))    D

this is the minimum speed to cross the well.

Now let's use conservation of energy

starting point. On the platform

      [tex]Em_{o}[/tex] = U = m g H

final point. At the bottom of the swing

      Em_{f} = K + U = 1 / 2m v² + m g (H -L)

as there is no friction the mechanical energy is conserved

        Em_{o} = Em_{f}

       m g H = 1 / 2m v² + m g (H -L)

        v = √ (2gL)

let's write our two equations

the minimum speed to cross the well

       v₀ₓ = √ (g /(2 (H -L))    D

the speed at the bottom of the oscillatory motion

       v = √ (2g L)

we analyze the extreme cases

* when L → H    chord too long

in this case we see that the speed to cross the well grows a lot (it goes towards infinity) therefore we do not have enough speed in the movement to cross

* when L → 0 very short string

         the speed of the platform is very small, so we do not have the minimum required value

        vox = √ (g / (2 (H)) D

From this analysis we see that there is a range of lengths that allows us to have the necessary speeds to cross the well

      V₀ₓ = v

      g / (2 (H -L) D² = 2g L

       4 L (H- L) = D²

        4 H L - 4 L2 - D² = 0

        L² - H L - D² / 4 = 0

let's solve the quadratic equation

      L = [H ± √ (H2-D2)] / 2

we assume that H> D

       L = ½ H [1 + - RA (1 - (D / H) 2)]

The two values ​​of La give the range of values ​​for which the two speeds are equal

A) The person lands in the moat if the rope's length is very short because :

B) The person lands in the moat if the rope length is similar to the height of the platform because :

Following the assumptions;

size of the person is much smaller than L and H

D = horizontal distance

Hence we can conclude that The person lands in the moat if the rope's length is very short because The speed of the platform is less than the required minimum speed  and  The person lands in the moat if the rope length is similar to the height of the platform because,the speed required to cross the moat approaches infinity.

Learn more about obstacle course : https://brainly.com/question/241926

Answer:

The value is    [tex]t = 56.68 \  s  [/tex]

Explanation:

From the question we are told that

   The rating of the hoist motor is  [tex]k  =  159hp = 159 *746 =118614 \ W[/tex]

    The  percentage of it power used is  [tex]z = 0.72 * 118614=85402.08 \ W[/tex]

      The  mass of the load is m  = 5550 kg

      The distance is  h = 89.0 m

The potential  energy required to lift the load through that distance is

     [tex]E =  m *  g * h[/tex]

=>    [tex]E =  5550 *  9.8 *  89.0[/tex]

=>   [tex]E =  4840710 \ J[/tex]

Generally the time taken is mathematically represented as

       [tex]t = \frac{E}{ z}[/tex]

=>    [tex]t = \frac{4840710}{ 85402.08}[/tex]

=>    [tex]t = 56.68 \  s  [/tex]

Answer:

The value  is  [tex]  \frac{dR}{dt} =  -286.2 \  km/hr [/tex]

Explanation:

From the question we are told that  

   The speed of the airplane from the north is [tex]\frac{dN}{dt}  =  -181 \  km /hr[/tex]

The negative sign is because the direction is towards the south

  The speed of the airplane from the east is  [tex]\frac{dE}{dt}  =  -278 \  km/hr[/tex]

The negative sign is because the direction is towards the west

   The distance of the southbound plane from the airport is  [tex]N  =  30 \  km[/tex]

   The distance of the westbound plane is  [tex]E =  15 \  km[/tex]

Generally the distance between the plane is mathematically represented using Pythagoras theorem  as

    [tex]R^2  = N^2 + E^2[/tex]

Next differentiate implicitly this equation to obtain the rate at which the distance between the planes changes

So

     [tex]2R\frac{dR}{dt} =  2N \frac{dN}{dt} +   2E\frac{dE}{dt}[/tex]

Here

     [tex]R = \sqrt{N^2 + E^2}[/tex]

=>    [tex]R = \sqrt{30^2 + 15^2}[/tex]

=>    [tex]R = \sqrt{30^2 + 15^2}[/tex]

=>    [tex]R =33.54 \ m [/tex]

    [tex]2(33.54) * \frac{dR}{dt} =  2( 30)*(-181)  +   2*15*(-278)[/tex]

=>   [tex] 67.08 * \frac{dR}{dt} =  -19200[/tex]

=>   [tex]  \frac{dR}{dt} =  -286.2 \  km/hr [/tex]

The rate of change of the distance between the planes is 286.23 km/hr.

The given parameters;

The distance between the two planes is calculated by applying Pythagoras theorem as shown below;

[tex]d^2 = n^2 + e^2\\\\d = \sqrt{n^2 + e^2} \\\\d = \sqrt{30^2 + 15^2} \\\\d = 33.54 \ km[/tex]

The rate of change of the distance between the planes is calculated as follows;

[tex]d^2 = e^2 + n^2\\\\2\frac{dd}{dt} = 2e\frac{de}{dt} + 2n\frac{dn}{dt} \\\\d\frac{dd}{dt} = e\frac{de}{dt} + n\frac{dn}{dt}\\\\(33.54) \frac{dd}{dt} = (15)(278) \ + (30)(181)\\\\(33.54) \frac{dd}{dt} = 9600\\\\\frac{dd}{dt} = \frac{9600}{33.54} \\\\\frac{dd}{dt} = 286.23 \ km/hr[/tex]

Thus, the rate of change of the distance between the planes is 286.23 km/hr.

Learn more here:https://brainly.com/question/11488002

Answer:

(a) The work done by the gas on the surroundings is, 17537.016 J

(b) The entropy change of the gas is, 73.0709 J/K

(c) The entropy change of the gas is equal to zero.

Explanation:

(a) The expression used for work done in reversible isothermal expansion will be,

where,

w = work done = ?

n = number of moles of gas  = 4 mole

R = gas constant = 8.314 J/mole K

T = temperature of gas  = 240 K

= initial volume of gas  =  

= final volume of gas  =  

Now put all the given values in the above formula, we get:

The work done by the gas on the surroundings is, 17537.016 J

(b) Now we have to calculate the entropy change of the gas.

As per first law of thermodynamic,

where,

= internal energy

q = heat

w = work done

As we know that, the term internal energy is the depend on the temperature and the process is isothermal that means at constant temperature.

So, at constant temperature the internal energy is equal to zero.

Thus, w = q = 17537.016 J

Formula used for entropy change:

The entropy change of the gas is, 73.0709 J/K

(c) Now we have to calculate the entropy change of the gas when the expansion is reversible and adiabatic instead of isothermal.

As we know that, in adiabatic process there is no heat exchange between the system and surroundings. That means, q = constant = 0

So, from this we conclude that the entropy change of the gas must also be equal to zero.

Explanation:

Answer:

i needed points it was an emergency sorry

Explanation:

Answer:

the scientific study of natural forces such as light, sound, heat, electricity, pressure, etc.

Explanation:

mark as brainliest

Answer:

I chose c because it is the greater slope at point c

Answer:

The speed as it reaches the bottom is  24m/s

Explanation:

Given parameters:

   Height of hill  = (3 x 9.8)m = 29.4m

Unknown:

Final speed as it reaches the bottom = ?

Solution:

 To solve this problem, we apply;

    v² = u² + 2gh

v is the final velocity

u is the initial velocity

g is the acceleration due to gravity = 9.8m/s²

h is the height

note, the initial speed of the body is 0;

Input the parameters and solve;

    v² = 0² + 2 x 9.8 x 29.4

   v² = 576.24

   v = √576.24  = 24m/s

The speed as it reaches the bottom is  24m/s

Answer:

The linear velocity is represented by the following expression: [tex]v = \frac{s}{t}[/tex]

Explanation:

From Rotation Physics we know that linear velocity of a point moving with uniform circular motion is:

[tex]v = r\cdot \omega[/tex] (Eq. 1)

Where:

[tex]r[/tex] - Radius of rotation of the particle, measured in meters.

[tex]\omega[/tex] - Angular velocity, measured in radians per second.

[tex]v[/tex] - Linear velocity of the point, measured in meters per second.

But we know that angular velocity is also equal to:

[tex]\omega = \frac{\theta}{t}[/tex] (Eq. 2)

Where:

[tex]\theta[/tex] - Angular displacement, measured in radians.

[tex]t[/tex] - Time, measured in seconds.

By applying (Eq. 2) in (Eq. 1) we get that:

[tex]v = \frac{r\cdot \theta}{t}[/tex] (Eq. 3)

From Geometry we must remember that circular arc ([tex]s[/tex]), measured in meters, is represented by:

[tex]s = r\cdot \theta[/tex]

[tex]v = \frac{s}{t}[/tex]

The linear velocity is represented by the following expression: [tex]v = \frac{s}{t}[/tex]

Answer: -9.8 m/s2

Explanation:

Answer:

2 and 8

Explanation:

please mark me brainiest I would really appreciate it.

Answer:

Thermal Energy

Explanation: