Answer:
12.7 L (3 s.f.)
Explanation:
Since it is an ideal gas, we can apply the ideal gas law:
[tex]\boxed{pV=nRT}[/tex]
☆ where p= pressure
V= volume
n= number of moles
R= ideal gas constant
T= temperature
Substitute all the given information into the formula:
2V= 1(0.08206)(310)
2V= 25.4386
V= 25.4386 ÷2
V= 12.7 L (3 s.f.)
Further explanation:
The ideal gas constant, R, has different values depending on what units are being used. Two examples are listed below:
[tex]• \: 0.08206 \: L \: atm ^{ - 1} \: mol \: K[/tex]
[tex]• \: 8.314 \: J \: {mol}^{ - 1} \: {K}^{ - 1} [/tex]
In the above question, we use the value 0.08206 because the pressure was given in atm and the temperature was given in Kelvin. Thus, the unit used for volume is L.
Answer: 12.7 L
Explanation:
P=2.0atm
V= ???
n=1.0 mol
R= 0.0821
T= 310K
PV=nRT--> (2)V=(1)(0.0821)(310)
V=12.7 L
what is the molar mass of c2h16?
use 4 significant figures in your answer.
Answer:
40.15 g/mol
Explanation:
The molar mass of c2h16 is
40.1484 g/mol ≈ 40.15 g/mol (rounded to 4 significant figures)
Por qué los alimentos se dañan con mayor facilidad a temperatura ambiente que cuando están en la nevera?
Answer:
Esto se debe a que la heladera tiene mucha menor temperatura que la temperatura ambiente.
Esta menor temperatura ayuda a luchar contra los microorganismos que están en los alimentos (bacterias, hongos, etc) pues detiene en gran medida su repreduccion, la cual se ve maximizada en los rangos entre 5°C y 60°C, tal que la temperatura ambiente suele estar en el rango donde los microorganismos prosperan y se reproducen, es por ello que los alimentos se conservan mucho mejor en ambientes fríos (como la nevera) que en temperatura ambiente.
PLEASE HELP!!
Consider the following intermediate chemical equations.
C(s) + O2(g) → CO2(g) AH, --393.5kJ
2CO(g) + O2(g) → 2CO2(g) AH, --566.0kJ
2H2O(g) → 2H2(g)+O2(g) AH2 - 483.6 kJ
The overall chemical equation is C(s) + H2O(g) → CO(g) +H2(g). To calculate the final enthalpy of the overall chemica
equation, which step must occur?
Reverse the first equation, and change the sign of the enthalpy. Then, add.
O Reverse the second equation, and change the sign of the enthalpy. Then, add.
O Multiply the first equation by three, and triple the enthalpy. Then, add.
O Divide the third equation by two, and double the enthalpy. Then, add.
Answer:
answer is option 2 hope it helps
The step that must be occurred in the calculation of the enthalpy of the given reaction is option B, reverse the second equation, and change the sign of the enthalpy, then add.
What is enthalpy of a reaction ?The enthalpy of a reaction is the heat energy absorbed or released by the reaction system. For a reaction, the reaction enthalpy can be calculated using the enthalpies of the component reactions.
Here the overall reaction is the formation of CO and H₂ from C and water. The first step is to reverse the second equation and change sign of enthalpy and double the first equation. Then add them, so that the CO₂ get eliminated.
Then, the resultant equation is halved again. Then divide the third equation by two and its enthalpy value also divided by 2. Then add it to the previous one and we get the net equation and corresponding reaction enthalpy.
Therefore, the step that must occur here is option B.
Find more on reaction enthalpy:
https://brainly.com/question/1657608
#SPJ5
Given 750 g of oxygen gas and chlorine gas and an excess of the other reactants, how much potassium chloride (grams) will be produced?
2MnO2 + 4KOH + O2 + Cl2 -> 2KMnO4 + 2KCl + 2H20
must show work
Answer:
=2h20−2kmno4+2mno2+2ckl+cl2+4hko+o2
Explanation:
step-by-step.
2mno2+4koh+o2+cl2−2kmno4+2kcl+2h20
=2mno2+4hko+o2+cl2+−2kmno4+2ckl+2h20
HELPPPPPP!!!! SHOW WORK
Calculate the pressure exerted by heels of a 100 lb woman in high heels, if the area beneath the heel of each shoe is 0.25 square inch
Answer:
P = 400 Lb/in²
Explanation:
We are given;
Weight of woman; W = 100 lb
Area beneath heel of shoe; 0.25 in²
Now, we want to find pressure.
Formula is;
P = F/A
Where;
F is force exerted by the object which is equal to weight of the object
A is area covered by object
Thus;
P = 100/0.25
P = 400 Lb/in²
The bathroom mirror has water droplets on it after a hot shower. choose the correct phase change. HELPP
Answer:
what?
Explanation:
what the hell?
how many elements are there
Answer:
there r 118 elements in periodic table..
hope it helps.
Explanation:
there are 118 elements.
Which of the following techniques can be used to separate a heterogeneous mixture into its component parts? (3 points)
Sort by color
Separation by density
Apply heat
Apply pressure
Answer:
Separation by density
Hope this helps
7
What might cause a theory to change over time?
A
New laws passed by the government
B
New but untestable Ideas
C Changes in public opinion
D
The discovery of new evidence
Answer:
D. The discovery of new evidence.
D is correct because it's the only one that would give proof and science relies on proof.
How many moles in 18g of H3PO4?
Answer:
0.184 mol
Explanation:
Look up molar masses for the elements that comprise H₃PO₄:
H = 1.008 g/mol
P = 30.97 g/mol
O = 15.99 g/mol
The molar mass of H₃PO₄ is a weighted sum of these (3 hydrogen + 1 phosphorus + 4 oxygen) that comes out to about 97.99 g/mol.
Then
(18 g H₃PO₄) × (1/97.99 mol/g) ≈ 0.1837 mol
Consider the energy diagram below.
Which line indicates a higher reaction rate?
A because it has a lower activation energy.
B because it has a lower activation energy.
A because it’s Grxn is much lower
B because it’s Grxn is much lower
Which statement most accurately describes a chemical equation?
a. in a chemical reaction, the mass of the energy change must be equal to the energy used
b. in a chemical reaction, the mass of the products must equal the mass of the reactants
c. in a chemical reaction, the mass of each product must be the same
d. in a chemical reaction, the combined mass of the container the substances is always equal
Answer: C
Explanation:
How many milliliters of 0.25 M solution of silver nitrate is needed to react with
sodium chloride to produce 7.6 g of silver chloride?
Answer:
To find molarity we must convert grams KCl to moles KCl and mL solution to L: ... EXAMPLE: What mass of potassium chloride would be needed to prepare 250.0 mL of a 0.500 ... EXAMPLE: Silver nitrate solution is added to 25.00 mL of a 0.500 M potassium chloride ... g) 0.655 g of sodium carbonate in 100.0 mL of solution.
Explanation:
What is the “advantage” and “disadvantage” when there is a mechanical advantage less than 1?
SELECT ALL THAT APPLY
A. Force Advantage
B. No Advantage
C. Distance Advantage
D. Force Disadvantage
E. Distance Disadvantage
Answer: Force disadvantage and distance advantage
Explanation: When mechanical advantage is less than one the force of the strength decreases because input force is greater than output force.
The distance increases ie the object is moving over a long distance.
Example when fishing with a long fishing rod the force applied to move the fish from the water is greater than the weight of the fish itself. The advantage of using the long fishing pole is that the distance over which the fish travels is greatly increased.
Hope this helps. It took me about half an hour before I could get this answer from my various searches. The idea might not be clear but this was what I was able to understand.
What ion will Magnesium form?
Calculate the density mass= 54.2 volume= 78.1
Answer:
0.693 (you can round it up if you want to)
Explanation:
Density= mass ÷ volume
54.2 ÷ 78.1 = 0.693
I hope this helped☺
6. Animals have many adaptations for survival. Describe each adaptation below, and explain how it could help an organism better survive in its environment.
a) camouflage
b) mimicry
c) venom
Which of these statements is true about the two graphed parallelograms?
Answer:
They are similar, because one can be obtained by dilating the other about the origin with a scale factor of 1/2.
Explanation:
The dilation of a shape is similar to the original shape; this is because the corresponding side lengths are proportional.A scale factor is how many times larger or smaller the image will be relative to the preimage. In other words, multiply the x and y-coordinates by the scale factor to get the coordinate points of the image.The image is dilated by 1/2.
Take a look.
The coordinate labels of the preimage include: A, B, C, and D.
The coordinate labels of the image include: A', B', C', and D'.
Coordinates of point A: (2, 8)
Coordinates of point A': (1, 4)
**The preimage's x and y-coordinates multiplied by 1/2 will give you the x and y-coordinates of the image.**
Which of the following is a characteristic of a strong acid?
O A. It does not conduct electricity in water.
B. It completely dissociates in water.
C. It reacts with water to form H2 gas.
O D. It increases the OH concentration.
The statement, that describes the characteristic of a strong acid is "it completely dissociates in water."
What is a strong acid?
In aqueous solution, strong acids and bases are completely ionised.
A strong acid is one that entirely ionises in solution. When dissolved in water, it emits the maximum number of hydrogen ions or protons, implying that it always loses a proton (H+).
As a result, it is possible to deduce that a strong acid (HA) entirely dissociates in solution.
Hence the correct option is B.
Learn more about here
https://brainly.in/question/5487028
#SPJ2
What is the molarity of 122.5 g of AlCl3 in 1.0 L of solution? (MM = 133 g/mol)
Molarity of 122.5 grams of AlCl₃ in 1 Liter solution is 0.921 M.
What is molarity?Molarity is defined as no. of moles of solute present in per liter of solution and it is represented as:
M = n/V
First we have to calculate the moles of AlCl₃ and it can be calculated as:
n = W/M, where
W = given mass of = 122.5g
M = molar mass of = 133g/mole
n = 122.5 / 133 = 0.921 moles
Now molarity in 1 liters can be calculated as:
M = 0.921/1 = 0.921M
Hence, molarity of AlCl₃ is 0.921M.
To know more about molarity, visit the below link:
https://brainly.com/question/17138838
An engineer is given a time limit of one month to design a compact cell phone that works under water and is durable. What constraint will the engineer be facing when designing this phone?
Size
durability
time for design
resistance to water
What is the concentration if I have 200 mL of water and dissolve 13g of salt in it? Show your work!
Answer:
The concentration is 0.065g/mL
Explanation:
Given
[tex]m = 13g[/tex] --- mass of salt
[tex]V =200mL[/tex] --- volume of water
Required
Determine the concentration (C)
This is calculated as:
[tex]C = \frac{m}{V}[/tex]
[tex]C = \frac{13g}{200mL}[/tex]
[tex]C = \frac{13}{200}g/mL[/tex]
[tex]C = 0.065g/mL[/tex]
The concentration is 0.065g/mL
yousab cycles at an average speed of 12 km/h. how far has he travelled if he cycles for 2 hours
Answer:
24 km
Explanation:
(12 km/hr)(2 hrs) = 24 km
How many grams of iron (III) oxide are needed?
Answer:
The SI base unit for amount of substance is the mole. 1 mole is equal to 1 moles Iron(III) Oxide, or 159.6882 grams.
About what fraction of Earth’s surface is covered by water?
A:1/4
B:1/2
C:3/4
D:9/10
Jaiden Drives for 800 km at an average speed of 120 km/h. How long was her journey?
Answer:
i think her journey was 680 km/h long
Answer:
6.67 hours
Explanation:
(800 km) / (120 km/hr) = 6.67 hours
6.6 moles of ZnO to molecules
Answer:
3.97e24
Explanation:
For every mol of any substance there are 6.02x10^23 molecules
so
6.6(6.02x10^23)= 3.97x10^24 Molecules of ZnO
The addition of electron shells results in _______ shielding of electrons from the nucleus.
Answer:
I believe the answer is "increasing"
Answer:
the shielding of electrons.
Explanation:
The nucleus pulls electrons to itself due to the net positive charge on it.As more electronic shell is added, the effect of the pull weakens outward.The inner shell experiences the nuclear pull more than the outer shell electrons.
If 2.1 moles of NaCl is dissolved in a solution with a total volume of 7.3 liters, what is the molarity of the solution? Round to two decimals.
Answer:
The molarity of the solution is 0.29 [tex]\frac{moles}{liter}[/tex]
Explanation:
Molarity, or molar concentration, is a measure of the concentration of a solute in a solution, be it some molecular, ionic or atomic species. It is defined as the number of moles of solute that are dissolved in a given volume.
Molarity is calculated as the quotient between the number of moles of solutes and the volume of the solution:
[tex]Molarity=\frac{number of moles of solute}{volume}[/tex]
Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].
In this case:
number of moles of solute= 2.1 molesvolume= 7.3 litersReplacing:
[tex]Molarity=\frac{2.1 moles}{7.3 liters}[/tex]
Molarity= 0.29 [tex]\frac{moles}{liter}[/tex]
The molarity of the solution is 0.29 [tex]\frac{moles}{liter}[/tex]
Answer:
M = 0.29 M
Explanation:
We are given;
Number of moles of NaCl; n = 2.1 moles
Total volume of solution; V = 7.3 L
Formula for molarity is;
M = n/L
Thus;
M = 2.1/7.3
M = 0.2878 M
Approximating to 2 decimal places gives;
M = 0.29 M
Complete the following chemical formula and determine the final molarity of NaCl:
__ BaCl2(aq) + __ Na2SO4(aq) --> ____ + _____
You react 45g BaCl2 with an excess of Na2SO4 in 250mL of water. Find the molarity of NaCl produced.
A. 0.25
B. 0.58
C. 1.72
D. 3.82
Answer:
[NaCl] = 1.72 M
Explanation:
First of all, we balance the equation:
BaCl₂ + Na₂SO₄ → 2NaCl + BaSO₄
We convert mass of barium chloride to moles
45 g . 1mol / 208.23g = 0.216 moles
Ratio is 1:2. This means, that our moles of reactant may produce the double of moles, of product.
0.216 . 2 = 0.432 moles of NaCl are been produced.
Molarity is mol/L. We convert volume of water from mL to L
250 mL . 1L /1000 mL = 0.250 L
[NaCl] = 0.432 mol/0.250L = 1.72 M