13) What property of matter would be measured with this piece of equipment?
A) The mass of an apple
hing
)
By the temperature of a room
The volume of water in a glass.
D) The length of a piece of string.

Answer:

3/10 F.

Explanation:

Height ( h ) = 1m

Time taken ( t ) = 0.1 second

Height² ( h² ) = 9m

Time taken² ( t² ) = 1 second

Solution,

F = ma

= m ( v - u ) / t

= m √2gh / t

now,

F/F² = √h/h² × t/t²

F¹ = 3/10 F.

answer !!

Answer:

n/a

Explanation:

this question is not feasible

Answer:

it is a light receptor that generates nerve signals that are sent to the brain

Explanation:

the lens are like the glasses, this means that is used to see things better. You just put them in your eye and that's all it's not connected to the brain

Answer:

c

Explanation:

The magnitudes of the forces that the ropes must exert on the knot connecting are :

Given data :

Mass ( M ) = 12 kg

∅₂ = 63°

∅₃ = 45°

a) Force exerted by the first rope = weight of rope

∴  F₁ = mg

     = 12 * 9.81 ≈  118 kg

b) Force exerted by the second rope

applying equilibrium condition of force in the vertical direction

F₂ sin∅₂ + F₃ sin∅₃ - mg = 0  ---- ( 1 )

where: F₃ = ( F₂ cos∅₂ / cos∅₃ ) --- ( 2 )  applying equilibrium condition of force in the horizontal direction

Back to equation ( 1 )

F₂ =  [ ( mg / cos∅₂ ) / tan∅₂ + tan∅₃ ]

   = [ ( 118 / cos 63° ) / ( tan 63° + tan 45° ) ]

   = 89.21 N

C ) Force exerted by the third rope

Applying equation ( 2 )

F₃ = ( F₂ cos∅₂ / cos∅₃ )

    = ( 89.21 * cos 63 / cos 45 )

    = 57.28 N

Hence we can conclude that The magnitudes of the forces that the ropes must exert on the knot connecting are :

F₁ = 118 N, F₂ = 89.21 N, F₃ = 57.28 N

Learn more about  static equilibrium : https://brainly.com/question/2952156

Answer:

Explanation:

Assuming the run out at the bottom of the slope is horizontal

μ = Ff/N = Ff/mg

Ff = μmg

a = Ff/m = μmg/m = μg

v = u + at

v = u + μgt

v = 6.55 - 0.088(9.81)(2)

v = 4.82 m/s

After reaching the bottom of the slope, it will take a speed of 4.8m/s to reach. So, the correct option is (C).

Friction is the force which opposes the relative motion of solid surfaces, fluid layers, and material elements that are sliding against each other. There are many types of friction like

Friction can be expressed as

Ff = μFN

where, Ff is the force of friction (N)

μ is the coefficient of friction.

FN is the normal force

As per the above equation, it is actually the normal force, not the weight, which is responsible for friction.

For given information,

Assuming the bottom of the slope is horizontal

So, μ = Ff/N = Ff/mg

Ff = μmg

a = Ff/m = μmg/m = μg

v = u + at (u- initial speed, v= final speed, a= acceleration and t= time)

v = u + μgt (g= acceleration due to gravity)

u = 6.55 - 0.088(9.81)(2)

u = 4.82 m/s

Thus, after reaching the bottom of the slope, it will take a speed of 4.8m/s to reach. So, the correct option is (C).

Learn more about Friction, here:

https://brainly.com/question/13000653

#SPJ2

Answer: I think its zero-

I dont really know about this...

Answer:

t is time in s For example, a car accelerates in 5 s from 25 m/s to 3 5m/s. Its velocity changes by 35 - 25 = 10 m/s. Therefore its acceleration is 10 ÷ 5 = 2 m/s2

Explanation:

Answer:

There ya go

Explanation:

The correct words to fill the given blanks would be as follows:

- Peak

- Trough

- Equilibrium Line

- Oscillation

- Frequency, Hertz

- Period, seconds

Learn more about "Oscillation" here:

brainly.com/question/9820984

Answer:

Explanation:

a = F/m = 7500/2000 = 3.75 m/s²

v² = u² + 2as

s = (v² - u²) / 2a

s = (0² - 45²) / (2(-3.75))

s = 270 m

An artistic statement should be written from your own perspective.

An artist's statement, also known as an artist statement, is a written summary of their creative output. The brief essay serves as an explanation of and a defense of their own work for the spectator. As a result, it is didactic, descriptive, or reflective in nature and seeks to inform, connect with an artistic environment, and reveal the inspiration behind the work.

The writing created by the artist aims to contextualize, justify, extend, and/or explain their body of work. It situates—or tries to situate—the piece in relation to art history, art theory, the contemporary art scene, and the times. The statement also demonstrates that the artist is aware of their aims, their practice, its place within the parameters of art, and the debate that surrounds it.

Learn more about  statement , refer the link:

https://brainly.com/question/13960241

#SPJ2

I think god did ??? I searched it up okay

God asked him to scarface his sons life

Answer:

net force would be 50 N right

Explanation:

The tank pressure is 5.08 kPa and the mass flow rate is 2.6 kg/s.

The given parameters:

The ratio of the areas of the converging-diverging nozzle is calculated as follows;

[tex]= \frac{A}{A^*} \\\\= \frac{0.002896}{0.001} \\\\= 2.896[/tex]

From supersonic isentropic table, at [tex]\frac{A}{A^*} = 2.896[/tex], we can determine the following;

[tex]M_e = 2.6 \ kg/s\\\\\frac{P_o}{P_e} = 19.954[/tex]

The tank pressure is calculated as follows;

[tex]\frac{P_o}{P_e} = 19.954 \\\\P_e = \frac{P_o}{19.954} \\\\P_e = \frac{101.325 \ kPa}{19.954} \\\\P_e = 5.08 \ kPa[/tex]

Thus, the tank pressure is 5.08 kPa and the mass flow rate is 2.6 kg/s.

Learn  more about converging-diverging nozzle design here: https://brainly.com/question/13889483

Answer:

115.05 Volts

Explanation:

We can use Ohm's Law!

V=IR

V= 1.77 * 65

V=115.05 Volts

Based on the information given, it can be noted that the bat was either shorter or longer than what he expected.

From the information given, it was stated that Raghu wants a cricket bat to be made by a carpenter and he tells the carpenter that the length of the bat should be 7 hand spans.

Since he got disappointed when he collected the bat, the reason for this will be because the bat was either shorter or longer than what he requested.

Learn more about length on:

https://brainly.com/question/25292087

The volumetric flow rate if friction is negligible = 0.00197 m³/sec

Given data :

P₁ = 7 atm  =  709.275 kPa

P₂ = 1.5 atm = 151.988 kPa

d₁  = 0.74 cm = 0.0074 m

d₂ = 1.20 cm  = 0.0120 m

h = 82 m

density of water ( p ) = 1000 kJ/m³

Estimate the volumetric flow rate

given that friction losses are negligible

V₁² - V₂² = [tex]\frac{2(P_{2} - P_{1}) }{p} + 2g(h )[/tex]

             = 2( 151.988 - 709.275 )  + 2 * 9.81 * 82

             = 2 ( - 557.287 ) + 1608.84

             = - 1114.574 + 1608.84  =  494.266

∴ V₁² - V₂² =  494.266 ----- ( 1 )

Also given that:

volumetric flow rate ( Q ) = A₁V₁ = A₂V₂

                                          = π / 4 ( 0.0074 )² * V₁   =   π / 4 ( 0.0120 )² * V₂

                                          = 0.000043 V₁ = 0.000113 V₂

∴ V₁ = 2.63 V₂

Back to equation ( 1 )

( 2.63 v₂ )² - V₂² = 494.266

V₂² = ( 494.266 ) / 1.63

∴ V₂ = √303.23 = 17.41  m/sec

Therefore the volumetric flow rate ( Q )

Q = A₂V₂

   =  π / 4  * ( 0.0120 )² * 17.41

   = 0.00197 m³/sec

Learn more about volumetric flow rate : https://brainly.com/question/24356835

Answer:

Atomic mass is defined as the number of protons and neutrons in an atom, where each proton and neutron has a mass of approximately 1 amu (1.0073 and 1.0087, respectively). The electrons within an atom are so miniscule compared to protons and neutrons that their mass is negligible.

Explanation:

The change in potential energy is 6324 Joules while the power is 263.5 Watts.

Potential energy is the amount of energy possessed by a body due to its position relative to another object.

a) Potential energy = weight * height = 510 N * 4 flight * 3.1 m per flight

Potential energy = 6324 Joules

b) Power = Energy / time = 6324 Joules / 22 seconds = 263.5 Watts

The change in potential energy is 6324 Joules while the power is 263.5 Watts.

Find out more on potential energy at: https://brainly.com/question/14427111

Answer:

17.5 N

Explanation:

→ F = (2.5 × 7.0) N

→ F = 25/10 × 7 N

→ F = 5/2 × 7 N

→ F = (5 × 7)/2 N

→ F = 35/2 N

→ F = 17.5 N towards left

Hence, 17.5 N of net force must act on the book to make it accelerate to the left.

Answer:

Mechanical energy into electrical energy

Explanation:

Answer:

ExplanMechanical energy into electrical energy

SIation:

Answer:

3. years

Explanation:

The independent variable is the x axis of graph

Answer:

Explanation:

Conservation of momentum

Initial momentum is zero

3.0(6.0) + 7.0v = 0

v = -18/7 = - 2.57142857...

|v| = 2.6 m/s

Answer:

Skeletal muscle cells

Explanation:

Skeletal muscle cells are long, cylindrical, and striated. They are multi-nucleated meaning that they have more than one nucleus. This is because they are formed from the fusion of embryonic myoblasts.

pls mark me the brainliest

Answer:

Its angular velocity is  

π

30

radians per second (about 0.105 radians/s.

Explanation:

Explanation:

Think of it like this:

There are  

2

π

radians in one complete rotation, and that takes the second hand 60 seconds to complete.

So, the rate of rotation (the angular velocity) is

2

π

/60 = pi/30 radians per second# which is about 0.105 radians per second.

To solve the problem we will first calculate the time taken by the second arm to travel 1 rad.

We know that the arm of the second travels 2π radians in 60 seconds. therefore, the time is taken to travel 1 rad by the second arm,

[tex]1\rm\ rad = \dfrac{60}{2\pi}[/tex]

Time taken by the second arm to travel 3.57 rad

[tex]=3.57\times \dfrac{60}{2\pi}\\\\= 34.09\rm\ sec[/tex]

Hence, the time taken by the second arm to travel 3.57 rad is 34.09 sec.

Learn more about Radians:

https://brainly.com/question/16989713

Answer:

Explanation:

F = kx = 65 N/m(0.94 m) = 61.1 = 61 N