Answer:
1 mole.
Explanation:
1.6x10^23 = NA = 1 mole of any substance.
PLEASE PLEASE HELP!!!!
Approximately what mass of potassium nitrate will eventually precipitate from a supersaturated solution containing 19 grams of the solute in 28 grams of water at 40C°?
A supersaturated solution contains more solute at a given temperature than is needed to form a saturated solution.
Increased temperature usually increases the solubility of solids in liquids.
For example, the solubility of glucose at 25 °C is 91 g/100 mL of water. The solubility at 50 °C is 244 g/100 mL of water.
If we add 100 g of glucose to 100 mL water at 25 °C, 91 g dissolve. Nine grams of solid remain on the bottom. We have a saturated solution.
Hope it helps u
Plz mrk me brainlest
What is The metric unit for volume ?
Answer:
milliliters
Explanation:
Is going to be milliliters because in the metric system of measurement,the most common unit of volume are milliliters and liters
Help me find out which reaction is balanced
Answer:The answer is c
Explanation:
1 point
To help you with estimating, the individual answers to A, B, C should all
have zero in the one's place. Add those answers up to get the numerical
code. Input that code to move on.*
A) 56 g NH3 can be dissolved in 100 g of water at °C
B) At 50°C, 166 g of KNO, can be dissolved in g of water to make a saturated
solution
C) At 76°C, KCI and HCI have the same solubility. What mass of each could be dissolved in
80 g of water?
Your answer
This is a required question
Back
Next
Answer:ee
Explanation:
Help plz:)))I’ll mark u Brainliest
Answer:
2.475 mol of O2 formed.
Explanation:
Given 1.65 moles of KClO3 as the target amount in the reactant, used the coefficient of the balanced chemical reaction involved to determine the number of moles of O2 molecules formed.
x mole of O2 = 1.65 mol KClO3 x [(3 mol O2)/ (2 mol KClO3)] = 2.475 mol of O2
x mole of O2 formed = 2.475 mol of O2
Which of the following contains the least amount (number) of molecules?
Group of answer choices
5.0 g O2
5.0 g H2O
5.0 g N2
5.0 g CO2
=jskidwkjicdovfojvoeeeeeeeeeeeeeeeeeeeeeeeec
Answer:
you need a theripist or maybe just your girl if this is your question.
Explantion: you are clearly very weird but very cute and ily.
How do new traits enter a population?
PLEASE HELP, DUE AT 12:00
Answer:
5.C6.DExplanation:
YONG ISA PO ETO HINDI KO PO ALAM TOH
Hi, what are you doing?
Answer:
i am dancing and you ok hom
Can someone please help me
Plants!
No doubt the answer is plants they are one maintaining the temperature, responsible for rains too...
what will cause electrons in an atom to love outward from their regular orbit
Answer:
When an electron is hit by a photon of light, it absorbs the quanta of energy the photon was carrying and moves to a higher energy state. So the electron moves to a different orbital where once again its own wavelength is in phase with its self.
hope this helps
have a good day :)
Explanation:
Answer:
In the Bohr atom electrons can be found only in allowed orbits, and these allowed ... that the angular momentum of an electron in orbit, like everything else in the quantum world,
Determine the type of reaction: AgNO3 + Cu --> Cu(NO3)2 + Ag
Explanation:
Cu + 2 AgNO3 → Cu(NO3)2 + 2 Ag
Cu is oxidized
Ag+ is reduced
Cu is the reducing agent
To solve such this we must know the concept of displacement reaction. The balanced reaction of silver nitrate with copper is of displacement type of reaction.
AgNO[tex]_3[/tex] + Cu [tex]\rightarrow[/tex] Cu(NO[tex]_3[/tex])[tex]_2[/tex] + Ag
What is Balanced equation?Balanced equation is the one in which the total number of atoms of a species on reactant side is equal to the total number of atoms on product side. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, displacement reaction.
The reaction between silver nitrate and copper is example of displacement reaction. Copper displaces silver from silver nitrate. to form copper nitrate.
Therefore, the balanced equation is of displacement type of reaction.
AgNO[tex]_3[/tex] + Cu [tex]\rightarrow[/tex] Cu(NO[tex]_3[/tex])[tex]_2[/tex] + Ag
Learn more about the balanced equation, here:
https://brainly.com/question/7181548
#SPJ2
Really stuck on this question !! Pls help
Answer:
can not be determined
Explanation:
because when I tried to calculate it it didn't give me the answer options that was in the pic so it's definitely C
Which of the first four radioisotopes in the decay series has the longest half-life? Pa-234 Th-234 U-234 U-238
Answer:
can u explain a little more then i will help like what are the four
Explanation:
Answer:
d) U-238
Explanation:
edg 2021
The tertiary structure of a protein is a complex arrangement formed as the polypeptide chain folds and twists.
a. True
b. False
Answer:
True
Explanation:
The tertiary structure of a protein is a complex arrangement formed as the polypeptide chain folds and twists.
This folding & twisting of polypeptide chain leading to its complex structure, is true about tertiary structure of protein. It occurs due to different interactions between side chains of amino acids.
If you have 1.4 grams of silver (Ag), how many moles of silver do you have?
Answer: There are 0.0129 moles of silver present in 1.4 grams of silver (Ag).
Explanation:
Given: Mass of silver = 1.4 g
Number of moles is the mass of substance divided by its molar mass.
As molar mass of silver is 107.86 g/mol. Therefore, moles of silver are calculated as follows.
[tex]No. of moles = \frac{mass}{molar mass}\\= \frac{1.4 g}{107.86 g/mol}\\= 0.0129 mol[/tex]
Thus, we can conclude that there are 0.0129 moles of silver present in 1.4 grams of silver (Ag).
Carbon-14 has a half-life of 5730 years. How much of a 144 g sample of carbon-14 will remain after 100,000 years?
Answer:
0.001 g
Explanation:
From the question given above, the following data were obtained:
Half-life (t½) = 5730 years
Original amount (N₀) = 144 g
Time (t) = 100,000 years
Amount remaining (N) =?
Next, we shall determine the number of half-lives that has elapsed. This can be obtained as follow:
Half-life (t½) = 5730 years
Time (t) = 100,000 years
Number of half-lives (n) =?
n = t / t½
n = 100,000 / 5730
n ≈ 17
Finally, we shall determine the amount remaining. This can be obtained as follow:
Original amount (N₀) = 144 g
Number of half-lives (n) = 17
Amount remaining (N) =?
N = 1/2ⁿ × N₀
N = 1/2¹⁷ × 144
N = 1/131072 × 144
N = 0.000007 × 144
N ≈ 0.001 g
Thus, the amount remaining after 100000 years is 0.001 g
is this correct im just asking because my little brother not sure for his answer
Why is medical technology good for society?
O A. It creates more jobs to do by hand,
B. It makes bilingspitals bigger.
C. It gives patients more illnesses.
D. It helps doctors treat diseases.
Can anyone please help?
Answer:
Earth
Explanation:
Earth is unique in the fact that we have an oxygen-rich atmosphere
Which of the following particles have the same mass. Proton, Neutron, Electron, None
Answer: proton and neutron
Explanation:
They both have the mass of 1
Plz help plz help me will mark Brainly
Answer:
Greenhouse gases absorb some of the energy and trap it in the lower atmosphere. Less heat radiates into space, and Earth is warmer. Many greenhouse gases occur naturally. Carbon dioxide, methane, water vapor, and nitrous oxide are naturally present in Earth's atmosphere. Since some of the extra energy from a warmer atmosphere radiates back down to the surface, Earth's surface temperature rises.
Hope this helped! :)
Consider an electron with charge −e−e and mass mmm orbiting in a circle around a hydrogen nucleus (a single proton) with charge +e+e. In the classical model, the electron orbits around the nucleus, being held in orbit by the electromagnetic interaction between itself and the protons in the nucleus, much like planets orbit around the sun, being held in orbit by their gravitational interaction. When the electron is in a circular orbit, it must meet the condition for circular motion: The magnitude of the net force toward the center, FcFcF_c, is equal to mv2/rmv2/r. Given these two pieces of information, deduce the velocity vvv of the electron as it orbits around the nucleus. Express your answer in terms of eee, mmm, rrr, and ϵ0ϵ0epsilon_0, the permittivity of free space.
Answer:
Explanation:
The net force on electron is electrostatic force between electron and proton in the nucleus .
Fc = [tex]\frac{1}{4\pi\epsilon} \times \frac{e\times e}{r^2}[/tex]
This provides the centripetal force for the circular path of electron around the nucleus .
Centripetal force required = [tex]\frac{m\times v^2}{r}[/tex]
So
[tex]\frac{m\times v^2}{r}=\frac{1}{4\pi\epsilon} \times \frac{e\times e}{r^2}[/tex]
[tex]v^2=\frac{e^2}{4\pi \epsilon m r}[/tex]
[tex]v=(\frac{e^2}{4\pi \epsilon m r})^{\frac{1}{2} }[/tex]
What is the new concentration? L
M NaCl
Answer:
Explanation:
\we must convert the mass of NaCl in grams into moles. We do this by dividing by the molecular weight of NaCl (58.4 g/mole). Then, we divide the number of moles by the total solution volume to get concentration. The NaCl solution is a 0.1 M solution.
Answer:
0.125
Explanation:
boom
The primary forces of attraction between water molecules in H2O(l) are
1.
ionic bonds
2.
hydrogen bonds
3.
molecule-ion attractions
4.
van der Waals forces
Submit Answer
Answer:
2. Hydrogen Bonds
Explanation:
Since water is a polar covalent molecule, there is a slight negative and positive end. Due to this, the oxygen end of one water molecule gravitates towards the hydrogen molecules of another water molecule. This accounts for a bunch of weird properties of water, like why ice floats. It's also what makes water the "universal solvent," and gives all life on earth the ability to even exist.
The primary forces of attraction between water molecules in H₂O (I) are hydrogen bonds.
What kind of chemical bonding is present in water molecule?Hydrogen bonding is present in water molecule due to which it exhibits an excellent property of adhesion to itself and to other substances.The hydrogen bonding is a result of electrostatic forces of attraction which are generated by the difference in charge between slightly positive hydrogen ions and slightly negative other ions.
In case of water,hydrogen bonds are formed between neighboring hydrogen and oxygen atoms of the nearby water molecules.The attraction between water molecules itself results in a formation of a bond called as a hydrogen bond.
It is a type of covalent bond which is formed between hydrogen and oxygen atoms as one oxygen atom shares its two electrons with two hydrogen atoms .The positive charge of one hydrogen atom associates with negative charge of oxygen atom.These are weak interactions which are formed between a hydrogen atom each with a partial positive charge and an oxygen atom which is more electronegative than hydrogen.
To learn more about bonding in water click here:
https://brainly.com/question/5302822
#SPJ2
Ksp for potassium chloride, KCl, is 21.7. A 5.0-liter container filled with otherwise-pure water, at standard temperature and pressure, contains 21.5 moles of dissolved KCl. (A) Write a chemical reaction describing the dissolution of KCl. (B) Write an equation for Ksp in terms of the reactants and products from part (A). (C) Find the solubility of KCl, in moles/liter. (D) Is the above solution undersaturated, supersaturated, or at equilibrium with respect to KCl
Answer:
See explanation below
Explanation:
a) First, as the KCl is a salt, this will ve completely dissociated by water in solution and the reaction taking place would be:
KCl <-----------> K⁺ + Cl⁻
b) According to the above reaction, the Ksp or constant of solubility product will be just the concentration of the products. This is because solid compounds do not contribute in the equilibrium expression, cause they have a constant concentration near to 1. Same thing happens with liquid compounds. So, based on this the Ksp expression for the above reaction is:
KCl(s) <-----------> K⁺(aq) + Cl⁻(aq)
Ksp = [K⁺] [Cl⁻]
c) To find this solubility we need to write the Ksp expression from above, use the given Ksp value and then solve for the solubility:
KCl(s) <-----------> K⁺(aq) + Cl⁻(aq)
Ksp = [K⁺] [Cl⁻]
21.7 = s * s
21.7 = s²
s = 4.66 mol/L
d) To know this, we need to see the concentration of the KCl in solution with the given data of 21.5 moles and the 5 liters of solution:
[K⁺] = [Cl⁻] = 21.5 / 5 = 4.3 mol/L
If we want to calculate the Ksp at this conditions we have:
Ksp2 = (4.3)²
Ksp2 = 18.49
As this value is lower than the actual Ksp value, we can conclude that this solution is undersaturated.
Hope this helps
Commercial soaps are mixtures of ionic compounds typically made up of monatomic cations, such as Na and K , and organic polyatomic anions derived from fatty acids. These negatively charged molecular ions are characterized by the presence of hydrocarbon chains which are 12 to 18 carbon atoms long. How hard (solid, insoluble) or soft (liquid, soluble) a soap is depends on the nature of the anions and cations present in the system. Analyze how each of the following factors may affect the hardness or softness of soaps:
1. The nature of the cations. For example, Na* vs Li* vs K.
2. The length of the hydrocarbon chain. For example, 12 carbons (laureate lon), 14 carbons (myristate lon), or 18 carbons (stearate lon).
Answer:
Following are the solution to the given question:
Explanation:
For question 1:
The sodium soap containing Na+ is strong whereas the softer or liquids were potassium soap.It's hard to use lithium soap.These Na+, K+, and Li+ ions act as the hydrophilic center.Calcium and Magnesium ions could be substituted by hard water with increasing hydrophilicity.For question 2:
The hydrophobicity of its carbon chain increases but one appears weaker with only an increased length.Therefore, the laureate is hard, while the stearate is soft.What is the volume in liters that is needed to create a 2.3 M solution with 3.7 moles of Fe(OH)2? Round your answer to 1 decimal.
Answer:
Explanation:
Não sei desculpa
An increase in temperature will cause an increase in diffusion rate because Multiple Choice hot molecules get smaller and therefore diffuse faster. the frequency and force of molecular collisions decreases. hot water changes to a solid, so diffusion is easier. hot water is thinner than cold water. the frequency and force of molecular collisions increases.
Answer:
hot water is thinner than cold water.
Explanation:
The rate of diffusion of a substance has a lot to do with the temperature of a body.
Let us take water for instance, cold water has a greater density than hot water. As a result of this, the molecules in cold water are slower when in motion and more sluggish.
On the other hand, the molecules of hot water are quite faster since hot water has a lower density(thinner than cold water).
Thus, an increase in temperature will cause an increase in diffusion rate because hot water is thinner than cold water.