19. light from a helium-neon laser has a wavelength of 632.8 nm. the laser beam is aimed at two slits placed 0.800 m from a screen. if you measure the first-order bright line 58.5 mm from the central line, what is the slit spacing?

When this problem is solved, we will arrive at the value 72741 to 4 meters per second.

An object's total, directionless motion is measured in terms of distance. Distance may also be referred to as the amount of ground covered by an element, depending on the starting or finishing point.

By calculating its distance, we can determine an object's actual size. One can measure the space that an object takes up above us. Its true size can be determined after we know how far away it is. As you get further away, something gets smaller.

To know more about Distance visit:

brainly.com/question/30289275

#SPJ4

The possible ways that heat can be transferred in this system are:

The most typical method of heat transfer is conduction, which involves the direct exchange of heat between two things.

Heat waves are created during the radiation heat transfer process and may be absorbed, reflected, or transmitted through a cooler substance. Earth is warmed by the sun using electromagnetic radiation. Heat waves come from warm bodies.

When Joiya sets the bottle of water down on a table or chair, then by conduction, heat ( or the loss of it ) would move around the table. Radiation would allow for the cold temperature to move into the air around the cold bottle.

Find out more on heat transfer at https://brainly.com/question/16055406

#SPJ1

Options for this question include:

The amount of the potential energy that was converted into thermal energy  is determined as 440,000 J.

The amount of the potential energy that was converted into thermal energy  is calculated by applying the principle of conservation of energy as follows;

P.E - K.E = Eth

where;

( 2,000 kg x 9.8 m/s² x 150 m ) - ¹/₂ (2,000 kg )( 50 m/s )² = Eth

2,940,000 J - 2,500,000 J = Eth

440,000 J = Eth

Learn more about thermal energy here: https://brainly.com/question/7541718

#SPJ1

The ratio i100hz/i1000hz is 1000, meaning that the least intense perceptible sound at 100 Hz is 1000 times more intense than the least intense perceptible sound at 1000 Hz.

Intense is an adjective describing something that is extreme or powerful, either in terms of strength, emotion, or concentration. It can refer to a feeling, such as intense emotion, or a physical sensation, such as intense pain.

The least intense perceptible sound at 100 Hz is about one millionth of a Pascal, while the least intense perceptible sound at 1000 Hz is about one billionth of a Pascal. Therefore, the ratio i100hz/i1000hz is 1000, meaning that the least intense perceptible sound at 100 Hz is 1000 times more intense than the least intense perceptible sound at 1000 Hz.

To learn more about intense
https://brainly.com/question/11418449
#SPJ4

If the work required to speed a car up from 10km/h to 20km/h is 5.0 x 10^3 J, the work required to increase the cars speed from 20km/h to 30km/h is: 8.33 × 10³J.

Using this formula to determine the   work required to increase the cars speed from 20km/h to 30km/h

[tex]Wii = Wi (V^2_2- V^2_1) /v^2_2 - v^2_1[/tex]

Let plug in the formula

Work required = (5 × 10³) (30² -20²) / (20² -10²)

Work required = (5 × 10³)  ( 900 - 400) /(400  - 100)

Work required = (5 × 10³) ( 500) / 300

Work required = 8.33 × 10³J

Therefore the Work required is 8.33 × 10³J.

Learn more about work required here:https://brainly.com/question/25573309

#SPJ1

A tool that uses sound waves to measure the distance of an object is called a sonar device.

A sonar device is a tool that uses sound waves to measure the distance or detect the presence of objects underwater. The device sends out a high-frequency sound pulse that travels through the water and bounces back to the device after hitting an object. By measuring the time it takes for the sound wave to return, the device can determine the distance to the object and generate an image of the underwater environment. Sonar technology is widely used in applications such as navigation, fishing, and search and rescue operations.

Sound waves are a type of mechanical wave that travels through a medium, such as air, water, or solids, and is generated by the vibration of an object. The vibration creates a compression and rarefaction of the medium, which then spreads out as a wave. When these waves reach the ear, they are interpreted by the brain as sound. The speed of sound in a given medium depends on the properties of that medium, such as density and temperature.

To know more about wave visit:

https://brainly.com/question/21995826

#SPJ4

Geosynchronous satellite makes a round around the earth in 29.93 hours. It makes a difference of 36000 km difference in the altitude.

Geosynchronous satellites are those that remains stationery with respect to a place. This is because their time period to complete a cycle is 23.93 hours, that is exactly the same as the rotation period of the earth. So the satellite appears stationery. The velocity of the geosynchronous satellite around the earth is 3.07 km/s or 3070 m/s.

GMm/(R+h)² = mv²/(R+h)

GM/v² = (R+h)²

Where R is the radius of the earth = 6.37 × 10⁶ m, h is the altitude of the satellite above the earth, and M is the mass of the earth that is 6 × 10²⁴ kg, G = 6.67 × 10⁻¹¹ Nm²/kg²

(6.67 × 10⁻¹¹ ×6 × 10²⁴)/(3070)² = (R+h)

(R+h) = 42461989 m

6.37 × 10⁶ + h = 42461989

h = 42461989 - 6.37 × 10⁶

h = 36.09 × 10⁶  m

h = 36000 km.

To know more about Geosynchronous satellite, here

https://brainly.com/question/13096100

#SPJ4

The mass of the object is: 100 kg

It is the physical magnitude that expresses the effort necessary to move the mass of one kilogram with an acceleration of one meter per second squared, this is expressed in units of the international system in Newton.

To solve this exercise, the formula and procedure to be applied is:

F = m * a

Where:

Information about the problem:

Applying the force formula and isolating the mass, we get:

F = m * a

m= F/a

m= 5.0x 10^2 n /5.0 m/s²

m= 100 kg

Learn more about force at: brainly.com/question/12970081

#SPJ4

Answer:

To keep the other four charges in equilibrium, the charge q that should be placed at the center of the square is equal in magnitude but opposite in sign to the total charge of the other four charges.

The force required to hold the ping pong ball completely under the water is 36,189.98 dyne.

Diameter of ball = 4.18 cm

The radius of the ball = 2.09 cm

The volume of the ball can be calculated as   V=    [tex]\frac{4}{3}[/tex]π r³                      

Therefore, the volume of the ball = 38.26 cm³

The net force required to completely submerge a ball under water = (Buoyant force) - (the weight of the ball)

If ρ₁ is used for the density of water. Then, the value of ρ₁ is 1 g cm⁻³.

Buoyant force = ρ₁gV

                      = 1 × 980 × 38.26

                      = 37494.80 dyne

Here, ρ₂ = density of ball = 0.0348 1 g cm⁻³.

                 Weight of ball = ρ₂gV

                                           = 0.0348 × 980 × 38.26

                                          = 1304.82 dyne

Therefore, the net force required to completely submerge a ball under water    = 37494.80 - 1304.82 = 36,189.98 dyne or 0.362 N

To know more about buoyant force,

brainly.com/question/17009786

#SPJ4

The density of silicon is [tex]2.33 * 10^{-9} kg.m^{3}[/tex]

Given density of silicon  is 2.33 gram centimeter cube.

We know that:

                            100 cm = 1 m

                            1cm = 1/100m = [tex]10^{-2} m[/tex]

                            [tex]1 cm^{3} = 10^{-6} m^{3}[/tex]

Also,

        1000 gram = 1 kg

        1 gram = 1/1000 kg = [tex]10^{-3} kg[/tex]

Now, to convert gram centimeter cube into kilogram meter cube we should multiply by these values.

So, By putting these values we get:

Density = 2.33 * [tex]10^{-3} kg * 10^{-6} m^{3} = 2.33 * 10^{-9}kg. m^{3}[/tex]

To know more about density visit:

https://brainly.com/question/10740762

#SPJ4

In a circle at constant speed, the work done is zero since the Force is always perpendicular to the distance moved as you move incrementally around the circle.

An object moves in a circle at a consistent speed in a motion known as uniform circular motion. Any point on a propeller, for instance, that is rotating continuously, is moving uniformly in circles. The second, minute, and hour hands on a watch are some further examples. It is amazing that despite the constant rotation rate, points on these revolving objects are actually speeding. We must consider the motion in terms of vectors in order to see this.

A centripetal motion is an Objects having a constant speed have zero acceleration in one-dimensional kinematics. In two- and three-dimensional kinematics, a particle can experience acceleration even if its speed is constant if it follows a curved trajectory, like a circle.

Learn more about uniform circular motion here: https://brainly.com/question/13592526

#SPJ4

Yes, the velocity of the ball has changed as it changed its direction from hitting the wall and after it struck the wall.

Speed is a scalar which means it has magnitude but not the direction. Velocity, on the other hand, is a vector with both magnitude and a direction. As the speed of two cars may be the same, if they are heading to different directions, then their velocity are not identical.

The velocity of he ball has changed. Let's call that the initial direction positive, when the ball was going towards the wall, its velocity is positive +V. But when it bounces directly back, the direction is now is negative -V. The direction of the velocity has changed, even though the magnitude has not.

To know more about velocity:

https://brainly.com/question/12910998

#SPJ4

The volume of object will be equal to the volume of water displaced so the object's volume is also 17.04 dm⁻³.

In water, the object appears lighter than in air.

That is,

936 - 769 = 167N.

Water provided the167N buoyant force.

The buoyant force on an object in water is equal to the weight of water displaced by the object. The buoyant force acting on the metal object in this case is 167N. The object must have displaced the same weight of water.

Given g = 9.8m/s²

Water displacement mass:

Mass = weight /g

         = 167/9.8

.         = 17.04 kg

Water displacement volume:

At room temperature, the density of water is 1.000 kg.dm⁻³. Each kilogram of water has a volume of 1 dm³ (one cubic decimeter), which is equal to 1 L. (one liter).

V = Mass / Density

= m/ρ

= 17.04/1.000 kg.dm⁻³

= 17.04dm⁻³

The object is completely submerged. As a result, the object's volume will remain constant. The object is completely submerged. As a result, the object's volume will be equal to the volume of water displaced. The object's volume is also 17.04 dm⁻³.

To learn more about volume refer to :

https://brainly.com/question/12213121

#SPJ4

The distance between the two parallel plates can be found using the equation E = V/d where E is the electric field, V is the potential difference and d is the distance between the plates. Thus, d = V/E = 125V / 4.25 x 103N/C = 29.41cm

The relationship between electric field, potential difference and distance in parallel plates is inversely proportional. As the potential difference increases, the electric field between the plates increases and the distance between the plates decreases. And as the distance between the plates increases, the electric field between the plates decreases and the potential difference applied to the plates decreases.

It can be mathematically represented by the formula E = V / d, where E is the electric field, V is the potential difference, and d is the distance between the plates.

To know more about parallel plates visit: https://brainly.com/question/12733413

#SPJ4

The distance between the two parallel plates can be found using the equation E = V/d  , 29.41cm far apart are the plates .

                             E = V/d

where E is the electric field,

V is the potential difference and

d is the distance between the plates.

                          Thus, d = V/E

                          = 125V / 4.25 x 103N/C

                                    = 29.41cm

The relationship between electric field, potential difference and distance in parallel plates is inversely proportional. As the potential difference increases, the electric field between the plates increases and the distance between the plates decreases. And as the distance between the plates increases, the electric field between the plates decreases and the potential difference applied to the plates decreases.

It can be mathematically represented by the formula E = V / d, where E is the electric field, V is the potential difference, and d is the distance between the plates.

Learn more about parallel plates:

brainly.com/question/12733413

#SPJ4

There is a thermal efficiency of 0.46 for a heat engine. With each cycle, it absorbs 780 J of heat from the high-temperature storage. B) 200 J waste heat it discard each cycle.

The thermal efficiency of a heat engine is defined as the ratio of the work output to the heat input, so in this case, the thermal efficiency is 0.46. Therefore, the work output is 0.46 * 780 J = 360 J.

The waste heat discarded each cycle is the difference between the heat input and the work output, so 780 J - 360 J = 200 J.

How much useful work does the heat engine perform in each cycle?

The useful work that the heat engine performs in each cycle can be determined by using the formula: thermal efficiency * heat absorbed = useful work. In this case, the thermal efficiency is 0.46, and the heat absorbed is 780 J.

Therefore, the useful work done by the engine is 0.46 * 780 J = 360 J.

To know more about Thermal Efficiency visit: brainly.com/question/13039990

#SPJ4

here is ur answer

MARK BRAIN PLease

There is not enough information to determine which object will reach the bottom of the ramp first. So option 1 is correct.

Without knowing the mass, radius, and coefficient of friction of the objects and the angle of the ramp, we can't determine which object will have the greater acceleration and thus reach the bottom of the ramp first.

To determine which object will reach the bottom of the ramp first, we need to know the acceleration of each object. The acceleration of an object is determined by the net force acting on it.

Which in turn is determined by the gravitational force acting on the object and the frictional force acting on it.

To learn more about gravitational force:

https://brainly.com/question/29276623

#SPJ4

The speed when they hit the street will be equal to each other.

Air resistance and gravity are the two fixed forces of nature which move on any object on Earth. For example, when a plane flies through the air, the air particles are pressing against the aeroplane, making it harder for the aircraft to move. When you see a feather fall, it is greatly affected by air resistance.

A force applied to all bodies on Earth is Weight ( W ), which is caused by Earth's gravity. If a body is free falling, its only acceleration is g , gravity. So gravity increases velocity. Both objects will show a change in their velocities because of gravity.

The velocity for both objects if one is thrown up and other is thrown down is same which is given by this formula:

where,

v= final velocity,

v₀= initial velocity,

h is the difference in height between building and street and g= acceleration due to gravity.

Learn more about Velocity from: https://brainly.com/question/80295

#SPJ4

The minimum thickness of a soap bubble film (air-soap-air) with refractive index 1.38 that results in a constructive interference in the reflected light if this film is illuminated by a beam of light of wavelength 610 nm is 150

nm.

The refractive index of an optical medium is described as a dimensionless number that gives the indication of the light bending ability of that medium.

Condition for constructive interference is given as ,

2μt = (2n + 1) λ/2

t =  (2n + 1) x 900 / 4x 1.5

where n = 0(for minimum thickness)

Therefore t= 150nm

Learn more about refractive index at: https://brainly.com/question/14760207

#SPJ1

Part a: Velocity with no friction: v = 6.41 m/s.

Part b:  velocity of the moving object when it reached at the bottom is found as  5.29 m/s.

Potential energy P.E

P.E =  mgh

P.E = 38 x 9.8 x 2.1   J

This all transforms to kinetic energy just at bottom = 0.5 mv² if there is no energy loss.

So,

0.5 x 38 x v² = 38 x 9.8 x 2.1,

v = 6.41 m/s

Part b: If friction results in a loss of energy of 250 J

0.5 x 38 x v² = 38 x 9.8 x 2.1 - 250

v² = 532.04/ (0.5 x 38)

v = 5.29 m/s

Thus, the velocity of the moving object when it reached at the bottom is found as  5.29 m/s.

To know more about the kinetic energy, here

https://brainly.com/question/25959744

#SPJ4

The correct question is-

2. A 38kg child is at the top of a slide that is 2. 1m tall.

(a) If there is no friction, how fast will they be moving when they reach the bottom of the slide?

(b) If they lose 250. 0J of energy to sound, heat, and friction, how fast will they be moving when they reach the bottom?

The magnitude of electric force is [tex]2.27 * 10^{6} N[/tex] (downwards)

We know that electric force between two charges is given by equation:

                                         F = [tex]\frac{k.q_{1} .q_{2} }{r^{2} }[/tex]

Where,

k = constant = [tex]9 * 10^{9} Nm^{2} /C^{2}[/tex]

q1 = first charge =35 C

q2 = second charge = -35 C

r = distance between them = 2.2 km = 2200m

Putting these values in above equation we get:

F = -[tex]2.27 * 10^{6} N[/tex] , where negative sign denotes the direction.

So, the magnitude of electric force is [tex]2.27 * 10^{6} N[/tex] (downwards)

To know more about electrostatics visit:

https://brainly.com/question/13263684

#SPJ4

Option E -  it remains the same , if a simple pendulum oscillates with small amplitude and its length is doubled .

The greatest displacement or distance that a point on a wave or vibrating body may travel in relation to its equilibrium position

A wave's amplitude is the difference between its starting position and its maximum displacement. Frequency is the amount of waves which pass past the certain place each second. Period is the length of time it takes for a wave cycle to finish.

    Given,length of a simple pendulum  is doubled .

To find, frequency of motion.

we have Time period T before doubling the length,

T = 2π[tex]\sqrt{\frac{L}{g} }[/tex]   L- length,g-acceleration due to gravity

T/2π = [tex]\sqrt{\frac{L}{g} }[/tex]  

g = L(2π/T[tex])^{2}[/tex]   → 1

when length is doubled,Time period [tex]T^{'}[/tex]

[tex]T^{'}[/tex] = 2π [tex]\sqrt{\frac{2L}{g} }[/tex]

( [tex]T^{'}[/tex] /2π[tex])^{2}[/tex] = [tex]\frac{2L}{g}[/tex]

g=2L( 2π/T[tex])^{2}[/tex] → 2

from equation 1 and 2

L( 2π/T[tex])^{2}[/tex] = 2L( 2π/T[tex])^{2}[/tex]

2π/T=[tex]\sqrt{2}[/tex](2π/T)

1/T  =[tex]\sqrt{2}[/tex](1/T)

we know,frequency γ = 1/T

γ  =[tex]\sqrt{2}[/tex]  γ '

γ ' =[tex]\frac{1}{\sqrt{2} }[/tex]  γ

Therefore option E is correct.

For such more questions on Amplitude:

brainly.com/question/8662436

#SPJ4

If a current of 16A flows through a wire with a resistance of 0.6 Ohms, the voltage is: 9.6V.

Using this formula to determine the voltage

V = I × R

Where:

V = voltage = ?

I = current = 16A

R = resistance = 0.6 Ohms

Let plug in the formula

V = 16A ×  0.6 Ohms

V = 9.6V

Therefore the voltage is 9.6V

Learn more about voltage here:https://brainly.com/question/24858512

#SPJ1

The change in position or displacement (Δx) divided by the time intervals (Δt) in which the displacement occurs yields the average velocity.

Depending on the sign of the displacement, the average velocity can be positive or negative.

To begin, in order to calculate average velocities, we need the position for each instant mentioned:

Y(2) = 2 ft

Y(2.5) = 0 ft

Y(2.1) = 13.44 ft

Y(2.05) = 14.76 ft

Y(2.01) = 15.7584 ft

Let us now compute the average velocities:

V(2 - 2.5) = Y(2.5) - Y(2) / 2.5 - 2

= -32 ft/s

V(2 - 2.1) = Y(2.1) - Y(2) / 2.1 - 2

= -25.6 ft/s

V(2 - 2.05) = Y(2.05) - Y(2) / 2.05 - 2

= -24.8 ft/s

V(2 - 2.01) = Y(2.01) - Y(2) / 2.01 - 2

= -24.16 ft/s

Now, we can derive the expression for y for the instantaneous velocity:

For t=2s, V(t) = 40 - 32t V(2) = -24ft/s

To learn more about average velocity refer to :

https://brainly.com/question/1844960

#SPJ4

Correct Question:

what is the gauge pressure profile of the water against a section of the container?

Gauge pressure is the pressure in relation to atmospheric pressure. For pressures greater than atmospheric pressure, gauge pressure is positive. For pressures lower than atmospheric pressure, gauge pressure is negative.

Pg stands for gauge pressure, which has the following relationships with absolute pressure: pg is equal to p - pa, where Pa is the local atmospheric pressure. Example: The tyre pressure, as determined by a vehicle tyre gauge, is 32.0 psi. The local atmosphere has a pressure of 14.2 psi.

There is pressure between two items that are in touch. The pressure profile is the distribution of pressure throughout the whole contact area.

Since the majority of gauges measure pressure in relation to atmospheric pressure, which acts as the zero point, this form of reading is simply referred to as "gauge pressure." But anything that is not a total vacuum is seen as being under pressure of some kind.

For such more question on Gauge pressure

https://brainly.com/question/30205815

#SPJ4

The heat required would be Q = 7.0 g/28 g/mol * 20.8 J/molK * (2T - T) = 544 J.

Heat is the transfer of energy from one body or system to another due to the difference in their temperatures. Heat is commonly transferred through thermal conduction, convection, radiation, or when two bodies with different temperatures come into direct contact.

The heat required for a process at constant pressure is greater than the heat required for a process at constant volume. This is because when a gas is heated at constant pressure, work is done to push the piston outward, so more energy is required.

To double the volume and temperature at constant pressure, the heat required would be equal to the change in internal energy of the system,
which can be calculated using the equation Q = nCvΔT,
where n is the number of moles of gas,
Cv is the molar heat capacity,
and ΔT is the change in temperature.
In this case, the molar heat capacity of nitrogen gas is 20.8 J/molK,
So the heat required would be Q = 7.0 g/28 g/mol * 20.8 J/molK * (2T - T) = 544 J.

To learn more about heat
https://brainly.com/question/28825214
#SPJ4

The velocity of the sailor relative to the aircraft carrier is - 7 m/s.

The velocity of the sailor relative to the aircraft carrier is calculated by applying the principle of relative velocity as shown below.

Vs/c = Vs - Vc

where;

The velocity of the sailor relative to the aircraft carrier is calculated as;

Vs/c = 36 m/s  -  43 m/s

Vs/c = -7 m/s

Learn more about relative velocity here: https://brainly.com/question/17228388

#SPJ1

The building block of all elements and the smallest component into which an element can be divided d. atom

Quarks, the universe's tiniest particles, are significantly smaller and have far greater energy levels than the protons and neutrons in which they are found.

An atom is the smallest unit of an element that retains all of its characteristics.

However, atoms include several subatomic particles, the most significant of which are protons, neutrons, and electrons.

learn more about subatomic particles

https://brainly.com/question/16847839

#SPJ1

The resultant force is approximately 11.75 N

If five equal forces of 10 N are applied at a point, and the angle between them is equal, then the forces can be considered as forming a regular pentagon.

The angle between any two adjacent forces in a regular pentagon:

180 - 360 degrees

            n

where,

n = the number of sides.

In this case, the angle is

180 - 360

           5

θ = 108 degrees.

To calculate the resultant force, we can use vector addition. Since the forces are equal and the angle between them is 108 degrees, we can use the law of cosines to find the magnitude of the resultant force. The law of cosines states that the square of the magnitude of the resultant force (R) is equal to the sum of the squares of the individual forces (F) plus twice the product of the individual forces and the cosine of the angle between them (θ).

R² = F² + F² + 2 * (F) *(F)* cos(108)

R² = 10² + 10² + 2(10)(10)cos(108)

R² = 100 + 100 + 200 * (cos(108))

R² = 100 + 100 + 200 * (-0.309016994)

R = ([tex]\sqrt({100 +100 - 62)}[/tex]

R = √138

R = 11.75 N

The magnitude of the resultant force is approximately 11.75 N, which is the force that would be required to replace all five forces.

Learn more about resultant force on

https://brainly.com/question/29246434

#SPJ1