Answer:
a) for adiabatic reversible, ΔU(internal energy is constant) = 0, ΔH = 0(no heat is entering or leaving the surrounding)
workdone (w) = -8442.6 J ≈ -8.443 KJ
heat transferred (q) of the ideal gas = - w
q = 8.443 KJ
b) For ideal gas at adiabatic reversible, Internal energy (ΔU) = 0 and enthalpy (ΔH) = 0
the workdone(w) in the ideal gas= - 4567.5 J ≈ - 4.57 KJ
the heat transfer (q) of an ideal gas = 4.5675 KJ
Explanation:
given
mole of an ideal gas(n) = 2.5 mol
Temperature (T) = 20°C
= (20°C + 273) K = 293 K
Initial pressure of the ideal gas(P₁) = 20 atm
Final pressure of the ideal gas(P₂) = 5 atm.
2) (a)for adiabatic reversible process,
note: adiabatic process is a process by which no heat or mass is transferred between the system and its surrounding.
Work done (w) = nRT ln[tex]\frac{P_{1} }{P_{2} }[/tex]
= 2.5 mol × 8.314 J/mol K × 293 K × ln[tex]\frac{5atm}{20atm}[/tex]
= 6090.01 J × [-1.3863]
= -8442.6 J ≈ -8.443 KJ
So, the work done (w) of ideal gas = -8.443 KJ
For ideal gas at adiabatic reversible, Internal energy (U) = 0 and Enthalpy (H) = 0
From first law of thermodynamics:-
U = q + w
0 = q + w
q = - w
q = - (-8.443 KJ)
q = 8.443 KJ
heat transfer (q) of the ideal gas = 8.443 KJ
(b) For adiabatic irreversible, the temperature T remains constant because the internal energy U depends only on temperature T. Since at constant temperature, the entropy is proportional to the volume, therefore, entropy will increase.
Work done (w) = -nRT(1 - ln[tex]\frac{P_{1} }{P_{2} }[/tex] )
= - 2.5 mol × 8.314 J / mol K× 293 K × [1- (5 atm /20 atm)]
= - 6090.01 J × 0.75
= - 4567.5 J ≈ - 4.57 KJ
∴work done(w) of an ideal gas = - 4.57 KJ
For ideal gas at adiabatic Irreversible, Internal energy (U) = 0 and Enthalpy (H) = 0
From first law of thermodynamics:-
U = q + w
0 = q + w
q = - w
q = - (-4.5675 KJ)
q = 4.5675 KJ
the heat transfer (q) of an ideal gas = 4.5675 KJ
11. How did the solubility product constant Ksp of KHT in pure water compare to its solubility product constant Ksp of KHT in KCl solution? Are these results what you would expect? Why?
Answer:
Explanation:
KHT is a salt which ionises in water as follows
KHT ⇄ K⁺ + HT⁻
Solubility product Kw= [ K⁺ ] [ HT⁻ ]
product of concentration of K⁺ and HT⁻ in water
In KCl solution , the solubility product of KHT will be decreased .
In KCl solution , there is already presence of K⁺ ion in the solution . So
in the equation
[ K⁺ ] [ HT⁻ ] = constant
when K⁺ increases [ HT⁻ ] decreases . Hence less of KHT dissociates due to which its solubility decreases . It is called common ion effect . It is so because here the presence of common ion that is K⁺ in both salt to be dissolved and in solvent , results in decrease of solubility of the salt .
what is the difference between acidic and basic protein
Answer:
Acidic proteins are proteins that move faster than serum albumin on zone electrophoresis (starch or acrylamide gel) and which bind most strongly to the basic ion exchangers used in protein chromatography.
Basic protein is a late gene product associated with the viral DNA within the nucleocapsid. The harnessing of this promoter allows the expression of foreign genes at earlier times than those using the very late phase promoters of the polyhedron and p10 genes.
Answer:
Acidic proteins are proteins that move faster than serum albumin on zone electrophoresis (starch or acrylamide gel) and which bind most strongly to the basic ion exchangers used in protein chromatography.
Basic protein is a late gene product associated with the viral DNA within the nucleocapsid. The harnessing of this promoter allows the expression of foreign genes at earlier times than those using the very late phase promoters of the polyhedron and p10
Explanation:
Carbon-14 has a half-life of 5720 years and this is a fast-order reaction. If a piece of wood has converted 75 % of the carbon-14, then how old is it?
Answer:
11445.8years
Explanation:
Half-life of carbon-14 = 5720 years
First we have to calculate the rate constant, we use the formula :
AB2AB2 has a molar solubility of 3.72×10−4 M3.72×10−4 M. What is the value of the solubility product constant for AB2AB2? Express your answer numerically.
Answer:
Ksp = 2.06x10⁻¹⁰
Explanation:
For AB₂. solubility product constant, Ksp, is written as follows:
AB₂(s) ⇄ A²⁺ + 2Br⁻
Ksp = [A²⁺] [Br⁻]²
Molar solubility represents how many moles of AB₂ are soluble per liter of solution. and is obtained from Ksp:
AB₂(s) ⇄ A²⁺ + 2Br⁻
AB₂(s) ⇄ X + 2X
where X are moles that are soluble (Molar solubility)
Ksp = [X] [2X]²
Ksp = 4X³As molar solubility of the salt is 3.72x10⁻⁴M:
Ksp = 4X³
Ksp = 4(3.72x10⁻⁴)³
Ksp = 2.06x10⁻¹⁰can I get some urgent help please?
Answer:
hi here goes your answer
Explanation:
iv. The lower the PH, the weaker the base
Suppose you titrate 25.00 mL of 0.200 M KOBr with 0.200M H2SO4. The pH at half-equivalence point is 7.75 a). What is the initial pH of the 25.00mL of 0.200M KOBr mentioned above
Answer:
Approximately [tex]10.88[/tex].
Explanation:
Equilibrium constant[tex]\rm OBr^{-}[/tex] can act as a weak Bronsted-Lowry base:
[tex]\rm OBr^{-}\; (aq) + H_2O\; (l) \rightleftharpoons HOBr\; (l) + OH^{-}\; (aq)[/tex].
(Side note: the state symbol of [tex]\rm HOBr[/tex] in this equation is [tex]\rm (l)[/tex] (meaning liquid) because [tex]\rm HOBr[/tex] is a weak acid.)
However, the equilibrium constant of this reaction, [tex]K_\text{eq}[/tex], isn't directly given. The idea is to find [tex]K_\text{eq}[/tex] using the [tex]\rm pH[/tex] value at the half-equivalence point. Keep in mind that this system is at equilibrium all the time during the titration. If temperature stays the same, then the same [tex]K_\text{eq}[/tex] value could also be used to find the [tex]\rm pH[/tex] of the solution before the acid was added.
At equilibrium:
[tex]\displaystyle K_\text{eq} = \frac{[\rm HOBr\; (l)]\cdot [\rm OH^{-}\; (aq)]}{[\rm OBr^{-}\; (aq)]}[/tex].
At the half-equivalence point of this titration, exactly half of the base, [tex]\rm OBr^{-}[/tex], has been converted to its conjugate acid, [tex]\rm HOBr[/tex]. Therefore, the half-equivalence concentration of [tex]\rm OBr^{-}[/tex] and [tex]\rm HOBr[/tex] should both be equal to one-half the initial concentration of [tex]\rm OBr^{-}[/tex].
As a result, the half-equivalence concentration of [tex]\rm OBr^{-}[/tex] and [tex]\rm HOBr[/tex] should be the same. The expression for [tex]K_\text{eq}[/tex] can thus be simplified:
[tex]\begin{aligned}& K_\text{eq} \\&= \frac{\left(\text{half-equivalence $[\rm HOBr\; (l)]$}\right)\cdot \left(\text{half-equivalence $[\rm OH^{-}\; (aq)]$}\right)}{\text{half-equivalence $[\rm OBr^{-}\; (l)]$}}\\ &=\text{half-equivalence $[\rm OH^{-}\; (aq)]$}\end{aligned}[/tex].
In other words, the [tex]K_\text{eq}[/tex] of this system is equal to the [tex]\rm OH^{-}[/tex] concentration at the half-equivalence point. Assume that [tex]\rm p\mathnormal{K}_\text{w}[/tex] the self-ionization constant of water, is [tex]14[/tex]. The concentration of [tex]\rm OH^{-}[/tex] can be found from the [tex]\rm pH[/tex] value:
[tex]\begin{aligned}& \text{half-equivalence $[\rm OH^{-}\; (aq)]$} \\ &= 10^{\rm pH - p\mathnormal{K}_\text{w}}\;\rm mol \cdot L^{-1} \\ &= 10^{7.75 - 14}\; \rm mol \cdot L^{-1}\\ &= 10^{-6.25}\; \rm mol \cdot L^{-1}\end{aligned}[/tex].
Therefore, [tex]\begin{aligned} K_\text{eq} &= 10^{-6.25}\end{aligned}[/tex].
Initial pH of the solutionAgain, since [tex]\rm KOBr[/tex] is a soluble salt, all that [tex]0.200\; \rm M[/tex] of [tex]\rm KOBr[/tex] in this solution will be in the form of [tex]\rm K^{+}[/tex] and [tex]\rm OBr^{-}[/tex] ions. Before any hydrolysis takes place, the concentration of [tex]\rm OBr^{-}[/tex] should be equal to that of [tex]\rm KOBr[/tex]. Therefore:
[tex]\text{$[\rm OBr^{-}\; (aq)]$ before hydrolysis} = 0.200\; \rm M[/tex].
Let the equilibrium concentration of [tex][\rm OH^{-}\; (aq)][/tex] be [tex]x\; \rm M[/tex]. Create a RICE table for this reversible reaction:
[tex]\begin{array}{c|ccccccc} & \rm OBr^{-}\; (aq) &+&\rm H_2O\; (l)& \rightleftharpoons & \rm HOBr\; (l)& + & \rm OH^{-}\; (aq) \\ \textbf{I}& 0.200\; \rm M & & & & 0 \; \rm M & & 0\; \rm M \\ \textbf{C} & -x\; \rm M & & & & +x \; \rm M & & +x\; \rm M \\ \textbf{E}& (0.200 + x)\; \rm M & & & & x \; \rm M & & x\; \rm M \end{array}[/tex].
Assume that external factors (such as temperature) stays the same. The [tex]K_\text{eq}[/tex] found at the half-equivalence point should apply here, as well.
[tex]\displaystyle K_\text{eq} = \frac{[\rm HOBr\; (l)]\cdot [\rm OH^{-}\; (aq)]}{[\rm OBr^{-}\; (aq)]}[/tex].
At equilibrium:
[tex]\displaystyle \frac{[\rm HOBr\; (l)]\cdot [\rm OH^{-}\; (aq)]}{[\rm OBr^{-}\; (aq)]} = \frac{x^2}{0.200 + x}[/tex].
Assume that [tex]x[/tex] is much smaller than [tex]0.200[/tex], such that the denominator is approximately the same as [tex]0.200[/tex]:
[tex]\displaystyle \frac{[\rm HOBr\; (l)]\cdot [\rm OH^{-}\; (aq)]}{[\rm OBr^{-}\; (aq)]} = \frac{x^2}{0.200 + x} \approx \frac{x^2}{0.200}[/tex].
That should be equal to the equilibrium constant, [tex]K_\text{eq}[/tex]. In other words:
[tex]\displaystyle \frac{x^2}{0.200} \approx K_\text{eq} = 10^{-6.25}[/tex].
Solve for [tex]x[/tex]:
[tex]x \approx 3.35\times 10^{-4}[/tex].
In other words, the [tex]\rm OH^{-}[/tex] before acid was added was approximately [tex]3.35\times 10^{-4}\; \rm M[/tex], which is the same as [tex]3.35\times 10^{-4}\; \rm mol \cdot L^{-1}[/tex]. Again, assume that [tex]\rm p\mathnormal{K}_\text{w} = 14[/tex]. Calculate the [tex]\rm pH[/tex] of that solution:
[tex]\begin{aligned}\rm pH &= \rm p\mathnormal{K}_\text{w} + \log [\mathrm{OH^{-}}] \approx 10.88\end{aligned}[/tex].
(Rounded to two decimal places.)
Why was it important to establish the Clean Air Act?
Answer: The Clean Air Act was important because it emphasized cost-effective methods to protect the air; encouraged people to study the effects of dirty air on human health; and created a regulation that makes any activities that pollute the air illegal.
Explanation:
Answer:
Clean Air Act (CAA), U.S. federal law, passed in 1970 and later amended, to prevent air pollution and thereby protect the ozone layer and promote public health. The Clean Air Act (CAA) gave the federal Environmental Protection Agency (EPA) the power it needed to take effective action to fight environmental pollution.
Identify a homogeneous catalyst:
a. SO2 over vanadium (V) oxide
b. H2SO4 with concentrated HCl
c. Pd in H2 gas
d. N2 and H2 catalyzed by Fe
e. Pt with methane
Answer:
b, H2SO4 with HCl, as they are both liquid acids
Arrange the following oxides in order of increasing acidity.
Rank from least acidic to most acidic. To rank items as equivalent,overlap them.
CaO
P2O5
SO3
SiO2
Al2O3
CO2
Answer:
Based on the Modern Periodic table, there is an increase in the electropositivity of the atom down the group as well as increases across a period. On comparing the electropositivities of the mentioned oxides central atom, it is seen that Ca is most electropositive followed by Al, Si, C, P, and S is the least electropositive.
With the decrease in the electropositivity, there is an increase in the acidity of the oxides. Thus, the increasing order of the oxides from the least acidic to the most acidic is:
CaO > Al2O3 > SiO2 > CO2 > P2O5 > SO3. Hence, CaO is the least acidic and SO3 is the most acidic.
Since acidity increases across a period from left to right, and decreases down a group, the oxides can be ranked from the least acidic to the most acidic as follows:
[tex]\mathbf{CaO < Al_2O_3 < SiO_2 < CO_2 < P_2O_5 <SO_3}[/tex]
The least acidic is CaOThe most acidic is [tex]SO_3[/tex]Note the following:
Acidity of an oxide depends on its electronegativity.Non-metals are more electronegative, while metals are less electronegative.Acidity of oxides increases across a period as you move from left to the right side of a periodic table.Acidity of oxides decreases down a group (column) in a periodic table.Using the periodic table diagram given in the attachment below, we can rank the given oxides according to their increasing acidity.
CaO, is the least, because it is an oxide of the metal, Calcium, which is at the far left in group 2 in the periodic table.The next is, [tex]Al_2O_3[/tex]. Aluminum is a metal from group 3.[tex]SiO_2[/tex] is an oxide of Silicon, also in group 4 but below Carbon.[tex]CO_2[/tex] is an oxide of Carbon, from group 4.
[tex]P_2O_5[/tex] is an oxide of the non-metal, Phosphorus, a group 5 element
[tex]SO_3[/tex] is an oxide of the non-metal, Sulphur, a group 6 element.
Therefore, since acidity increases across a period from left to right, and decreases down a group, the oxides can be ranked from the least acidic to the most acidic as follows:
[tex]\mathbf{CaO < Al_2O_3 < SiO_2 < CO_2 < P_2O_5 <SO_3}[/tex]
The least acidic is CaOThe most acidic is [tex]SO_3[/tex]Learn more here:
https://brainly.com/question/12200588
Need help finding major products
Answer:
Explanation:
RX + AgNO₃ = R⁺ ( carbocation ) + AgX + NO₃⁻
C₂H₅OH ( a nucleophile ) + R⁺ = ROC₂H₅
C₅H₁₁X + AgNO₃ = C₅H₁₁⁺ + AgX + NO₃⁻
In the first case carbocation produced is CH₃CH₂CH₂CH₂CH₂⁺
CH₃CH₂CH₂CH₂CH₂⁺ ⇒ CH₃CH₂CH₂C⁺HCH₃ ( secondary carbocation more stable )
CH₃CH₂CH₂C⁺HCH₃ + C₂H₅OH ⇒ CH₃CH₂CH₂CH(OC₂H₅)CH₃
Hence option D is correct .
b )
In the second case carbocation produced is
CH₃CH₂CH₂CH⁺CH₃
CH₃CH₂CH₂C⁺HCH₃ + C₂H₅OH ⇒ CH₃CH₂CH₂CH(OC₂H₅)CH₃
The product formed is same as in case of first
Option B is correct
An aqueous solution containing 5.06 g of lead(II) nitrate is added to an aqueous solution containing 6.03 g of potassium chloride.Enter the balanced chemical equation for this reaction. Be sure to include all physical states.balanced chemical equation:What is the limiting reactant?lead(II) nitratepotassium chlorideThe percent yield for the reaction is 82.9% . How many grams of the precipitate are formed?precipitate formed:gHow many grams of the excess reactant remain?excess reactant remaining:
Answer:
Pb(NO3)2(aq) + 2KCl(aq) ------> 2KNO3(aq) + PbCl2(s)
3.52 g of PbCl2
3.76 g of KCl
Explanation:
The equation of the reaction is;
Pb(NO3)2(aq) + 2KCl(aq) ------> 2KNO3(aq) + PbCl2(s)
Number of moles of Pb(NO3)2 =mass/molar mass 5.06g/331.2 g/mol = 0.0153 moles
Number of moles of KCl= mass/ molar mass= 6.03g/74.5513 g/mol= 0.081 moles
Next we obtain the limiting reactant; the limiting reactant yields the least number of moles of products.
For Pb(NO3)2;
1 mole of Pb(NO3)2 yields 1 mole of PbCl2
Therefore 0.0153 moles of Pb(NO3)2 yields 0.0153 moles of PbCl2
For KCl;
2 moles of KCl yields 1 mole of PbCl2
0.081 moles of KCl yields 0.081 moles ×1/2 = 0.041 moles of PbCl2
Therefore Pb(NO3)2 is the limiting reactant.
Theoretical Mass of precipitate obtained = 0.0153 moles of PbCl2 × 278.1 g/mol = 4.25 g of PbCl2
% yield = actual yield/theoretical yield ×100
Actual yield = % yield × theoretical yield /100
Actual yield= 82.9 ×4.25/100
Actual yield = 3.52 g of PbCl2
If 1 mole of Pb(NO3) reacts with 2 moles of KCl
0.0153 moles of Pb(NO3)2 reacts with 0.0153 moles × 2 = 0.0306 moles of KCl
Amount of excess KCl= 0.081 moles - 0.0306 moles = 0.0504 moles of KCl
Mass of excess KCl = 0.0504 moles of KCl × 74.5513 g/mol = 3.76 g of KCl
When the following molecular equation is balanced using the smallest possible integer coefficients, the values of these coefficients are:
P2O5 (s) + H2O (l) =H3PO4 (aq)
The balanced chemical equation for the reaction between hydrogen sulfide and oxygen is:
2H2S(g) + 3O2(g) =2H2O(l) + 2SO2(g)
We can interpret this to mean:
3moles of oxygen and_______moles of hydrogen sulfide react to produce______moles of water and_______ moles of sulfur dioxide.
Answer:
1. The coefficients are: 1, 3, 2
2. From the balanced equation, we obtained the following:
3 moles oxygen, O2 reacted.
2 moles of Hydrogen sulfide, H2S reacted.
2 moles of water were produced.
2 moles of sulphur dioxide, SO2 were produced.
Explanation:
1. Determination of the coefficients of the equation.
This is illustrated below:
P2O5(s) + H2O(l) <==> H3PO4(aq)
There are 2 atoms of P on the left side and 1 atom on the right side. It can be balance by putting 2 in front of H3PO4 as shown below:
P2O5(s) + H2O(l) <==> 2H3PO4(aq)
There are 2 atoms of H on the left side and 6 atoms on the right side. It can be balance by putting 3 in front of H2O as shown below:
P2O5(s) + 3H2O(l) <==> 2H3PO4(aq)
Now the equation is balanced.
The coefficients are: 1, 3, 2.
2. We'll begin by writing the balanced equation for the reaction. This is given below:
2H2S(g) + 3O2(g) => 2H2O(l) + 2SO2(g)
From the balanced equation above,
3 moles of oxygen, O2 reacted with 2 moles of Hydrogen sulfide, H2S to produce 2 moles of water, H2O and 2 moles of sulphur dioxide, SO2.
A student mixes wants to prepare 24.1 mmol of benzamide from benzoyl chloride and NH4OH. If the student uses excess 15 M NH4OH, how many mL of Benzoyl chloride must be used
Answer:
2.81mL
Explanation:
Based on the reaction:
C₆H₃COCl + 2NH₃ → C₆H₅CONH₂ + NH₄Cl
Benzoyl chloride + ammonia → Benzamide
1 mole of benzoyl chloride in excess of ammonia produce 1 mole of Benzamide.
Thus, assuming a theoretical yield, to produce 24.1mmoles of benzamide you require 24.1mmoles of benzoyl chloride.
As molar mass of benzoyl chloride is 141g/mol, mg you require are:
mg Benzoyl chloride: 24.1mmol × (141mg / 1mmol) = 3398.1mg = 3.3981g of benzoyl chloride.
to convert this mass to mL, you require density of Benzoyl chloride (1.21g/mL). Thus, mL you need are:
3.3981g × (1mL / 1.21g) =
2.81mLbelow are three reactions showing how chlorine from CFCs (chlorofluorocarbons) destroy ozone (O3) in the stratosphere. Ozone blocks harmful ultraviolet radiation from reaching earth’s surface. Show how these 3 equations sum to produce the net equation for the decomposition of two moles of ozone to make three moles of diatomic oxygen (2 O3→ 3 O2), and calculate the enthalpy change. (6 points) R1 O2 (g) → 2 O (g) ΔH1°= 449.2 kJ R2 O3 (g) + Cl (g) → O2 (g) + ClO (g) ΔH2° = -126 kJ R3 ClO (g) + O (g) → O2 (g) + Cl (g) ΔH3°= -268 kJ
Answer:
ΔH = -338.8kJ
Explanation:
it is possible to sum the enthalpy changes of some reactions to obtain the enthalpy change of the whole reaction (Hess's law).
Using the reactions:
R₁ O₂(g) → 2O(g) ΔH₁°= 449.2 kJ
R₂ O₃(g) + Cl(g) → O₂(g) + ClO(g) ΔH₂° = -126 kJ
R₃ ClO (g) + O (g) → O₂ (g) + Cl (g) ΔH₃°= -268 kJ
By the sum 2R₂ + 2R₃:
(2R₂ + 2R₃) = 2O(g) + 2O₃(g) → 4O₂(g)
ΔH = 2ₓ(-126kJ) + (2ₓ-268kJ) = -788kJ
Now, this reaction + R₁
2O₃(g) → 3O₂(g)
ΔH = -768kJ + 449.2kJ
ΔH = -338.8kJcetylene gas is often used in welding torches because of the very high heat produced when it reacts with oxygen gas, producing carbon dioxide gas and water vapor. Calculate the moles of oxygen needed to produce of water.
Answer:
0.60 mol
Explanation:
There is some info missing. I think this is the original question.
Acetylene gas is often used in welding torches because of the very high heat produced when it reacts with oxygen gas, producing carbon dioxide gas and water vapor. Calculate the moles of oxygen needed to produce 1.5 mol of water.
Step 1: Given data
Moles of water required: 1.5 mol
Step 2: Write the balanced equation
C₂H₂(g) + 2.5 O₂(g) ⇒ 2 CO₂(g) + H₂O(g)
Step 3: Calculate the moles of oxygen needed to produce 1.5 mol of water
The molar ratio of O₂ to H₂O is 2.5:1. The moles of oxygen needed to produce 1.5 mol of water are (1/2.5) × 1.5 mol = 0.60 mol
A chemistry student weighs out of formic acid into a volumetric flask and dilutes to the mark with distilled water. He plans to titrate the acid with solution. Calculate the volume of solution the student will need to add to reach the equivalence point. Round your answer to significant digits.
The given question is incomplete, the complete question is:
A chemistry student weighs out 0.0349g of formic acid HCHO2 into a 250.mL volumetric flask and dilutes to the mark with distilled water. He plans to titrate the acid with 0.1500M NaOH solution. Calculate the volume of NaOH solution the student will need to add to reach the equivalence point. Round your answer to 3 significant digits.
Answer:
The correct answer is 5.06 ml.
Explanation:
Based on the given information, the weight of formic acid given is 0.0349 grams. The volume of formic acid of V1 given is 250 ml. The molecular mass of formic acid is 46 grams per mole. Now the molarity of formic acid will be,
[HCOOH] = weight * 1000 / molecular mass * volume (ml)
= 0.0349 * 1000 / 46 * 250
= 0.003035 M or M1
The molarity of NaOH given is 0.1500 M or M2
Let us assume that the volume needed to attain equivalence point is V2 ml. The volume V2 can be determined by using the dilution equation,
M1V1 = M2V2
V2 = M1V1/M2
V2 = 0.003035 * 250 / 0.1500
V2 = 5.06 ml.
Hence, the volume of NaOH needed is 5.06 ml.
Draw the Lewis structure for methane (CH4) and ethane (C2H6) in the box below. Then predict which would have the higher boiling point. Finally, explain how you came to that conclusion.
Answer:
Ethane would have a higher boiling point.
Explanation:
In this case, for the lewis structures, we have to keep in mind that all atoms must have 8 electrons (except hydrogen). Additionally, each carbon would have 4 valence electrons, with this in mind, for methane we have to put the hydrogens around the carbon, and with this structure, we will have 8 electrons for the carbon. In ethane, we will have a bond between the carbons, therefore we have to put three hydrogens around each carbon to obtain 8 electrons for each carbon.
Now, the main difference between methane and ethane is an additional carbon. In ethane, we have an additional carbon, therefore due to this additional carbon, we will have more area of interaction for ethane. If we have more area of interaction we have to give more energy to the molecule to convert from liquid to gas, so, the ethane will have a higher boiling point.
I hope it helps!
The Lewis structure shows the valence electrons in a molecule. Ethane will have a higher boiling point than methane.
We can deduce the number of valence electrons in a molecule by drawing the Lewis structure of the molecule. The Lewis structure consists of the symbols of elements in the compound and the valence electrons in the compound.
We know that the higher the molar mass of a compound the greater its boiling point. Looking at the Lewis structures of methane and ethane, we cam see that ethane has a higher molecular mass (more atoms) and consequently a higher boiling point than methane.
Learn more: https://brainly.com/question/2510654
A sample of neon gas at a pressure of 0.609 atm and a temperature of 25.0 °C, occupies a volume of 19.9 liters. If the gas is compressed at constant temperature to a
volume of 12.7 liters, the pressure of the gas sample will be
atm.
Answer:
The pressure of the gas sample will be 0.954 atm.
Explanation:
Boyle's law states that the pressure of a gas in a closed container is inversely proportional to the volume of the container, when the temperature is constant. That is, if the pressure increases, the volume decreases; conversely if the pressure decreases, the volume increases.
Boyle's law is expressed mathematically as:
Pressure * Volume = constant
o P * V = k
To determine the change in pressure or volume during a transformation at constant temperature, the following is true:
P1 · V1 = P2 · V2
That is, the product between the initial pressure and the initial volume is equal to the product of the final pressure times the final volume.
In this case:
P1= 0.609 atmV1= 19.9 LP2=?V2= 12.7 LReplacing:
0.609 atm* 19.9 L= P2* 12.7 L
Solving:
[tex]P2=\frac{0.609 atm* 19.9 L}{12.7 L}[/tex]
P2= 0.954 atm
The pressure of the gas sample will be 0.954 atm.
what is the meaning of the word tetraquark?
Answer:
A tetraquark in physics is an exotic meson composed of four valence quarks.
Explanation:
It has been suspected to be allowed by quantum chromodynamics, the modern story of strong interactions.
Hope it helps.
Limiting reagent problem. How many grams of H2O is produced from 40.0 g N2O4 and 25.0 g N2H4. N2O4 (l) + 2 N2H4 (l) → 3 N2 (g) + 4 H2O(g)
Answer:
28.13 g of H2O.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
N2O4(l) + 2N2H4 (l) → 3N2(g) + 4H2O(g)
Next, we shall determine the masses of N2O4 and N2H4 that reacted and the mass of H2O produced from the balanced equation.
This is illustrated below:
Molar mass of N2O4 = (14x2) + (16x4) = 92 g/mol
Mass of N2O4 from the balanced equation = 1 x 92 = 92g
Molar mass of N2H4 = (14x2) + (4x1) = 32 g/mol
Mass of N2H4 from the balanced equation = 2 x 32 = 64 g
Molar mass of H2O = (2x1) + 16 = 18 g/mol
Mass of H2O from the balanced equation = 4 x 18 = 72 g
Summary:
From the balanced equation above,
92 g of N2O4 reacted with 64 g of N2H4 to produce 72 g of H2O.
Next, we shall determine the limiting reactant.
This can be obtained as follow:
From the balanced equation above,
92 g of N2O4 reacted with 64 g of N2H4.
Therefore, 40 g of N2O4 will react with = (40 x 64)/92 = 27.83 g of N2H4.
From the calculations made above, we can see that it will take a higher mass i.e 27.83 g than what was given i.e 25 g of N2H4 to react completely with 40 g of N2O4.
Therefore, N2H4 is the limiting reactant and N2O4 is the excess reactant.
Finally, we shall determine the mass of H2O produced from the reaction of 40.0 g of N2O4 and 25.0 g of N2H4.
In this case the limiting reactant will be used because it will produce the maximum amount of H2O as all of it is consumed in the reaction.
The limiting reactant is N2H4 and the mass of H2O produced can be obtained as follow:
From the balanced equation above,
64 g of N2H4 reacted to produce 72 g of H2O.
Therefore, 25 g of N2H4 will react to produce = (25 x 72)/64 = 28.13 g of H2O.
Therefore, 28.13 g of H2O were obtained from the reaction.
A student obtained a clean flask. She weighed the flask and stopper on an analytical balance and found the total mass to be 34.232 g. She then filled the flask with water and found the new mass to be 60.167 g. The temperature of the water was measured to be
Answer:
25.99mL is the volume internal volume of the flask
Explanation:
To complete the question:
The temperature of the water was measured to be 21ºC. Use this data to find the internal volume of the stoppered flask
The flask was filled with water, that means the internal volume of the flask is equal to the volume that the water occupies.
To find the volume of the water you need to find the mass and by the use of density of water at 21ºC (0.997992g/mL), you can find the volume of the flask, thus:
Mass water = Mass filled flask - Mass of clean flask
Mass water = 60.167g - 34.232g
Mass water = 25.935g of water.
To convert this mass to volume:
25.935g × (1mL / 0.997992g) =
25.99mL is the volume internal volume of the flaskhow salt solution can be determined by using hydrometer
Answer:
Salt solution may be calculated by measuring the specific gravity of a sample of water using a hydrometer.
Hope this answer correct (^^)....
A compound X has a molecular ion peak in its mass spectrum at m/z 136. What information does this tell us about X
Explanation:
The mass to charge ratio =136
After the reaction between sodium borohydride and the ketone is complete, the reaction mixture is treated with water and H2SO4 to produce the desired alcohol. Explain the reaction by clearly indicating the source of the hydrogen atom that ends up on the oxygen
Answer:
The hydrogen can be gotten from the added Acid or water during "workup".
Explanation:
Basically we can say that the reaction describe in this question is a Reduction reaction because of the chemical compound called sodium borohydride. In the reaction described above we can see that there is a Reduction of ketone to alcohol by the compound; sodium borohydride.
For the reduction Reaction to occur the C-O bond must break so as to enable the formation of O-H bond and C-H bond.
So, "the reaction mixture is treated with water and H2SO4 to produce the desired alcohol", thus, the oxygen will definitely pick up the hydrogen from H2SO4 or H2O.
Drag each image to the correct location on the model. Each image can be used more than once. Apply the rules and principles of electron configuration to draw the orbital diagram of aluminum. Use the periodic table to help you.
Answer:
The answer to your question is given below.
Explanation:
Aluminium has atomic number of 13. Thus, the electronic configuration of aluminium can be written as:
Al (13) —› 1s² 2s²2p⁶ 3s²3p¹
The orbital diagram is shown on the attached photo.
Answer: screen shot
Explanation:
A sample of N2(g) was collected over water at 25 oC and 730 torr in a container with a volume of 340 mL. The vapor pressure of water at 25 oC is 23.76 torr. What mass of N2 was collected
Answer:
0.36 g of N2.
Explanation:
The following data were obtained from the question:
Temperature (T) = 25 °C
Volume (V) = 340 mL
Measured pressure = 730 torr
Vapour pressure = 23.76 torr
Mass of N2 =..?
First, we shall determine the true pressure of N2. This can be obtained as follow:
Measured pressure = 730 torr
Vapor pressure = 23.76 torr
True pressure =..?
True pressure = measured pressure – vapor pressure
True pressure = 730 – 23.76
True pressure = 706.24 torr.
Converting 706.24 torr to atm, we have:
760 torr = 1 atm
Therefore,
706.24 torr = 706.24 / 760 = 0.929 atm
Next, we shall convert 340 mL to L. This is illustrated below:
1000 mL = 1 L
Therefore,
340 mL = 340/1000 = 0.34 L
Next, we shall convert 25 °C to Kelvin temperature. This is illustrated below:
Temperature (K) = Temperature (°C) + 273
T(K) = T (°C) + 273
T (°C) = 25 °C
T(K) = 25 °C + 273
T (K) = 298 K
Next, we shall determine the number of mole of N2. This can be obtained as follow:
Pressure (P) = 0.929 atm
Volume (V) = 0.34 L
Temperature (T) = 298 K
Gas constant (R) = 0.0821 atm.L/Kmol
Number of mole (n) =...?
PV = nRT
0.929 x 0.34 = n x 0.0821 x 298
Divide both side by 0.0821 x 298
n = (0.929 x 0.34 ) /(0.0821 x 298)
n = 0.0129 mole
Finally, we shall determine the mass of N2 as shown below:
Mole of N2 = 0.0129 mole
Molar mass of N2 = 2x14 = 28 g/mol
Mass of N2 =.?
Mole = mass /Molar mass
0.0129 = mass of N2/ 28
Cross multiply
Mass of N2 = 0.0129 x 28
Mass of N2 = 0.36 g
Therefore, 0.36 g of N2 was collected.
After heating a sample of hydrated CuSO4, the mass of released H2O was found to be 2.0 g. How many moles of H2O were released if the molar mass of H2O is 18.016 g/mol
Answer:
0.1110 mol
Explanation:
Mass = 2g
Molar mass = 18.016 g/mol
moles = ?
These quantities are realted by the following equation;
Moles = Mass / Molar mass
Substituting the values of the quantities and solving for moles, we have;
Moles = 2 / 18.016 = 0.1110 mol
Which is a nonpolar molecule?
Answer:
Explanation:
A nonpolar molecule has no separation of charge, so no positive or negative poles are formed. In other words, the electrical charges of nonpolar molecules are evenly distributed across the molecule. Nonpolar molecules tend to dissolve well in nonpolar solvents, which are frequently organic solvents. The answer is hydrogen cyanide.
The ionization constant of lactic acid ch3ch(oh) co2h am acid found in the blood after strenuous exercise is 1.36×10^-4 If 20.0g of latic acid is used to make a solution with a volume of 1.00l what is the concentration of hydronium ion in the solution
Answer:
Explanation:
CH₃CHOHCOOH ⇄ CH₃CHOHCOO⁻ + H⁺
ionisation constant = 1.36 x 10⁻⁴ .
molecular weight of lactic acid = 90 g
moles of acid used = 20 / 90
= .2222
it is dissolved in one litre so molar concentration of lactic acid formed
C = .2222M
Let n be the fraction of moles ionised
CH₃CHOHCOOH ⇄ CH₃CHOHCOO⁻ + H⁺
C - nC nC nC
By definition of ionisation constant Ka
Ka = nC x nC / C - nC
= n²C ( neglecting n in the denominator )
n² x .2222 = 1.36 x 10⁻⁴
n = 2.47 x 10⁻²
nC = 2.47 x 10⁻² x .2222
= 5.5 x 10⁻³
So concentration of hydrogen or hydronium ion = 5.5 x 10⁻³ g ion per litre .
The concentration of hydrogen or hydronium ion = 5.5 x 10⁻³ g ion per liter .
Ionization of lactic acid can be represented as:
CH₃CHOHCOOH⇄ CH₃CHOHCOO⁻ + H⁺
Given:
ionization constant = 1.36 x 10⁻⁴
mass= 20.0 g
Now, Molecular weight of lactic acid = 90 g
[tex]\text{Number of moles}=\frac{20}{90} =0.22mol[/tex]
It is dissolved in 1.00L so molar concentration of lactic acid formed will be
C = 0.22M
Consider "n" to be the fraction of moles ionized
CH₃CHOHCOOH ⇄ CH₃CHOHCOO⁻ + H⁺
C - nC nC nC
By definition of ionization constant Ka
[tex]K_a =\frac{nC*nC}{C-nC}[/tex]
[tex]K_a= n^2C[/tex] ( neglecting n in the denominator )
On substituting the values we will get:
[tex]n^2 *0.22 = 1.36 *10^{-4}\\\\n = 2.47 * 10^{-2}[/tex]
To find the concentration of hydronium ion in the solution,
[tex]nC = 2.47 *10^{-2} *0.22\\\\nC= 5.5 * 10^{-3}[/tex]
So, concentration of hydrogen or hydronium ion = 5.5 x 10⁻³ g ion per liter.
Learn more:
brainly.com/question/19954349
Air contains nitrogen, oxygen, argon, and trace gases. Ifthe partial pressure of nitrogen is 592 mm Hg, oxygen is160 mm Hg, argon is 7 mm Hg, and trace gas is 1 mm Hg,what is the atmospheric pressure
Answer:
760 mmHg
Explanation:
Step 1: Given data
Partial pressure of nitrogen (pN₂): 592 mmHgPartial pressure of oxygen (pO₂): 160 mmHgPartial pressure of argon (pAr): 7 mmHgPartial pressure of the trace gas (pt): 1 mmHgStep 2: Calculate the atmospheric pressure
Since air is a gaseous mixture, the atmospheric pressure is equal to the sum of the gases that compose it.
P = pN₂ + pO₂ + pAr + pt = 592 mmHg + 160 mmHg + 7 mmHg + 1 mmHg = 760 mmHg