Answer: 75.7 % yield
Explanation:
The balanced chemical equation is:
[tex]2H_2S+SO_2\rightarrow 3S+2H_2O[/tex]
According to stoichiometry :
68.2 g of [tex]H_2S[/tex] will require = 64 g of [tex]SO_2[/tex]
Thus 7.5 g of [tex]H_2S[/tex] will require = [tex]\frac{64}{68.2}\times 7.5=7.0g[/tex] of [tex]SO_2[/tex]
Thus is the limiting reagent as it limits the formation of product and is the excess reagent.
As 68.2 g of give = 96 g of
Thus 7.5 g of [tex]H_2S[/tex] give =[tex]\frac{96}{68.2}\times 7.5=10.5g[/tex] of [tex]S[/tex]
% yield=[tex]\frac{\text{Actual yield}}{\text {Theoretical yield}}\times 100=\frac{7.95g}{10.5g}\times 100=75.7\%[/tex]
Thus 75.7 % yield is there.
Air movement can affect how quickly evaporation occurs.
O True
O False
STEP 7: LEAD
Initial temperature of metal = 100
✓°C
Initial temperature of water = 22.6
✓ °C
Final temperature of both = 23.3
°C
Subtract to find the temperature
changes for the water and the metal.
AT (water) = 0.7 ✓ °C
AT (metal) = 76.7 ✓ °C
Answer:
answer is 76
Explanation:
pls mark me brainliest right
Answer:
0.7
76.7
this is for (LEAD) the last one
What kinds of matter have thermal energy
Answer:
Thermal energy comes from heat sources that provide energy from it's temp.
Explanation:
Produced when a rise in temperature causes atoms and molecules to move faster and collide with each other. The energy that comes from the temperature of the heated substance is called thermal energy. 6 min, 47 sec Heat Energy.
(If this doesn't help let me know in the comments, I'll try to explain better :> )
Help please it’s due in 3 minutes
Answer:
A
Explanation:
Both students are Pushing/Pulling towards the same direction meaning if enough force is applied the object will move into that direction
HELP I DON'T HAVE TIME LEFT
Answer:
mass
Explanation:
Answer:
C Mass
Explanation:
mass wont change when a force is put upon it.
What is the phase label on CI?
A. aq
B.
C. e
D. g
E. s
Answer:
Pubic hair smells bad
Explanation:
Describe the critical property ofelectrons in 2s versus 2p orbitals that causes the radial distribution functions of these orbitals to have different shapes about the nucleus such that 2s electrons effectively penetrate closer to the nucleus than do electrons in 2p orbitals.Then, write an expression for the potential energy function describing this effect.
Answer:
Answer is explained in the explanation section below.
Explanation:
Penetration refers to the proximity of electrons in an orbital to the nucleus.
Deeper-penetrating electrons have less shielding and therefore a higher Effective nuclear charge (Zeff), but they better shield other electrons.
To illustrate penetration, we may use the idea of Zeff, or effective nuclear charge. It's actually the difference between the number of charged protons and the number of shielded electrons. To put it another way, how effective the nucleus is at attracting electrons. Since they do not shield themselves, the core electrons penetrate the most and are exposed to the most strong nuclear charge.
The electron probability density is highest in the orbital's centre or nucleus for 28-orbitals.
In a multi-electron unit, the electron density near the nucleus of an atom for each shell and subshell of an electron is used to measure the nucleus penetration by an electron.
Since it has a higher electron density near the nucleus, the 2s electron penetrates the nucleus of the atom more than the 2p electron.
A 2s electron is less well shielded by the core electrons than a 2p electron because it can spend more time near the nucleus as a result of the penetration.
Mathematical Expression:
v = [tex]\frac{-Zeff * e^{z} }{r^{2} }[/tex]
why the ph of glycine increases when 0.1 M NaOH is added dropwise
Answer:
The acid-base reaction produces glycine reduction, and hence the increase of glycine pH.
Explanation:
The glycine is an amino acid with the following chemical formula:
NH₂CH₂COOH
The COOH functional group is what gives the acid properties in the molecule.
Hence, when NaOH is added to glycine an acid-base reaction takes place in which COOH reacts with the NaOH added:
NH₂CH₂COOH + OH⁻ ⇄ NH₂CH₂COO⁻ + H₂O
The glycine concentration starts to shift to its ion form (NH₂CH₂COO⁻) because of the reaction with NaOH, that is why the pH glycine increases when NaOH is added.
Therefore, the acid-base reaction produces glycine reduction, and hence the increase of glycine pH.
I hope it helps you!
Convert 1.55 x 10^24 ATOMS OF CARBON TO MOLES OF CARBON
Answer:
2.57 moles of carbon
Explanation:
1 mole = 6.023x10^23 (this is called avogadro's number)
1/6.023x10^23
1.55x10^24 = 1.55x10^24/6.023x10^23 = 2.57 moles
this means, 1.55x10^24 atom contains 2.57 moles of carbon
9. During which phase of Mitosis does the Cell start to get ready to divid
Prophase
O Metaphase
Anaphase
Telophase
Hello,
QUESTION)TelephaseDuring telophase, the cell, each pole of which inherits the same number of single chromosomes, begins to divide into 2: this is cytodieresis.
25. What is a subdivision of a family? *
O kingdom
O domain
O genus
O species
What is the maximum number of bonds that can occur between two atoms?
One
Two
Three
Four
Five
it can occur 5 atoms
Explanation:
that is base on my study
Air in a closed cylinder is heated from 15°C to 36°C. If the initial pressure is 1000 torr, determine what is the final pressure? *
Answer:
1072 torr
Explanation:
To answer this problem we can use Gay-Lussac's law, which states:
P₁T₂=P₂T₁Now we convert the given temperatures into K:
T₁ = 15°C ⇒ 15+273.16 = 288.16 KT₂ = 36°C ⇒ 36+273.16 = 309.16 KWe input the data:
1000 torr * 309.16 K = P₂ * 288.16 KAnd solve for P₂:
P₂ = 1072 torrWhat makes an acid acidic? a) Number of protons in a molecule b) Temperature c) Chemical structure d) Phase
Answer:
C.
Explanation:
Chemical structure
How many K3PO4 are in the equation below after it is correctly balanced?
K3PO4 +
HCI -->
KCI +
H3PO4
Answer:
1 K3PO4 +3 HCI -->3 KCI +1 H3PO4
Explanation:
K3PO4- 1
iron (II) chloride + chlorine gas
iron (III) chloride
Answer:
Fe2Cl + Chlorine
Explanation:
Fe2Cl2
Calculate the number of moles in 42.15g of magnesium carbonate.
Answer:
0.5mol
Explanation:
Please mark as brainliest
Which of these is a pair of coordination isomers (aka ionization isomers)?
a. Na2[NiBr2Cl2] and K2[NiBr2Cl2]
b. [Ni(NH3)3Br]Cl and [Ni(NH3)3Cl]Br
c. [Ni(NH3)3(H2O)]SO4 and [Ni(NH3)2(H2O)2]SO4
Which of these pairs are linkage isomers??
a. [Pt(Cl)2(SCN)4]^4- and [Pt(Cl)2(NCS)4]^4-
b. [Pt(Cl)2(SCN)4]^4- and [Pt(Cl)4(SCN)2]^4-
c. K4[Pt(Cl)2(SCN)4] and Na4[Pt(Cl)2(SCN)4]
Answer: [tex][Ni(NH_3)_3Br]Cl[/tex] and [tex][Ni(NH_3)_3Cl]Br[/tex] are ionization isomers.
[tex][Pt(Cl)_2(SCN)_4]^{4-}[/tex] and [tex][Pt(Cl)_2(NCS)_4]^{4-}[/tex] are linkage isomers.
Explanation:
Ionization isomerism occur when a ligand that is bound to the metal center exchanges places with an anion or neutral molecule that was originally outside the coordination complex
Thus [tex][Ni(NH_3)_3Br]Cl[/tex] and [tex][Ni(NH_3)_3Cl]Br[/tex] are ionization isomers.
Linkage isomerism is the existence of coordination compounds that have the same composition differing with the connectivity of the metal to a ligand.
Thus [tex][Pt(Cl)_2(SCN)_4]^{4-}[/tex] and [tex][Pt(Cl)_2(NCS)_4]^{4-}[/tex] are linkage isomers.
7. Which substance produces sulfur dioxide when roasted in air?
A bauxite
B cryolite
C hematite
D zinc blende
B. cryolite substance produces sulfur dioxide when roasted in air.
Cryolite (Na3AlF6, sodium hexafluoroaluminate) is an uncommon mineral identified with the once-large deposit at Ivittuut on the west coast of Greenland, mined commercially until 1987.
Sulfur dioxide (SO2) is a gaseous air pollutant composed of sulfur and oxygen. SO2 forms when sulfur-containing fuel such as coal, oil, or diesel is burned. Sulfur dioxide also converts in the atmosphere to sulfates, a major part of fine particle pollution in the eastern U.S.
What is sulfur dioxide and why is it bad?Sulfur dioxide (SO2), a colorless, bad-smelling, toxic gas, is part of a larger group of chemicals referred to as sulfur oxides (SOx). These gases, especially SO2, are emitted by the burning of fossil fuels — coal, oil, and diesel — or other materials that contain sulfur.
What is sulfur dioxide used for?Although its chief uses are in the preparation of sulfuric acid, sulfur trioxide, and sulfites, sulfur dioxide also is used as a disinfectant, a refrigerant, a reducing agent, a bleach, and a food preservative, especially in dried fruits.
To learn more about Sulfur dioxide, refer
https://brainly.com/question/803589
#SPJ2
Where does thermal energy go? Assuming you forgot your hot food and came after a while and found it cold now. Where did the energy go?
NH3(g) + O2(g) + CH4(g) → HCN(aq) + H20(l)
Answer:
2 NH3(g) + 3 O2(g) + 2 CH4(g) = 2 HCN(aq) + 6 H2O(l)
Explanation:
Reaction stoichiometry Limiting reagent
Compound Coefficient Molar Mass Moles Weight
NH3(g) 2 17.03052
O2(g) 3 31.9988
CH4(g) 2 16.04246
HCN(aq) 2 27.02534
H2O(l) 6 18.01528
Instructions on balancing chemical equations:
Enter an equation of a chemical reaction and click 'Balance'. The answer will appear below
Always use the upper case for the first character in the element name and the lower case for the second character. Examples: Fe, Au, Co, Br, C, O, N, F. Compare: Co - cobalt and CO - carbon monoxide
To enter an electron into a chemical equation use {-} or e
To enter an ion specify charge after the compound in curly brackets: {+3} or {3+} or {3}.
Example: Fe{3+} + I{-} = Fe{2+} + I2
Substitute immutable groups in chemical compounds to avoid ambiguity.
For instance equation C6H5C2H5 + O2 = C6H5OH + CO2 + H2O will not be balanced,
but PhC2H5 + O2 = PhOH + CO2 + H2O will
Compound states [like (s) (aq) or (g)] are not required.
If you do not know what products are enter reagents only and click 'Balance'. In many cases a complete equation will be suggested.
Reaction stoichiometry could be computed for a balanced equation. Enter either the number of moles or weight for one of the compounds to compute the rest.
Limiting reagent can be computed for a balanced equation by entering the number of moles or weight for all reagents.
The given chemical equation is already balanced and does not require any further balancing.
The chemical equation NH₃(g) + O₂(g) + CH₄(g) → HCN(aq) + H₂O(l) is already balanced because the number of atoms of each element is the same on both sides of the equation.
On the left side of the equation, there is 1 nitrogen (N) atom in NH₃ and 1 nitrogen (N) atom in HCN.
On the right side of the equation, there are 3 hydrogen (H) atoms in NH₃, 2 hydrogen (H) atoms in HCN, and 2 hydrogen (H) atoms in H₂O.
There are 3 oxygen (O) atoms in O₂ on the left side of the equation and 1 oxygen (O) atom in H₂O on the right side of the equation.
Finally, there is 1 carbon (C) atom in CH₄ on the left side of the equation.
Since the number of atoms of each element is balanced on both sides of the equation, we can conclude that the given equation is already balanced and does not require any further adjustments or coefficients.
To learn more about balanced equation, here
https://brainly.com/question/31242898
#SPJ2
The complete question is:
How can I balance NH₃(g) + O₂ (g) + CH₄ (g) -> HCN (aq) + H₂O (l)?
What season is represented in the northern hemisphere? *
5 points
Captionless Image
A. Spring
B. Summer
C. Fall
D. Winter
Answer:
B. summer
Explanation:
The northern hemisphere experiences summer during the months of June, July, and August because it is tilted toward the sun and receives the most direct sunlight.
PLEASE ANSWER True or False: When adding reactions together to get a desired reaction you must also add their enthalpies to get the enthalpy of that desired reaction.
Answer:
true
Explanation:
A new substance with unique chemical and physical properties formed when two or more elements are chemically bonded during a physical reaction.
Answer:
A compound
Explanation:
Chemical compound can be regarded as any substance made up of identical molecules which consists atoms of two or more than two chemical elements. For example four hydrogen atoms bonds with a carbon atom to give methane molecule which is a compound. It should be noted that A compound is a new substance with unique chemical and physical properties formed when two or more elements are chemically bonded during a physical reaction.
Please help me, im studying for finals and i need an answer to this question! Will mark brainliest for the best answers!w
Answer:
the generation of electricity and other energy jointly, especially the utilization of the steam left over from electricity generation to produce heat.
I hope it helps!! Have a nice day
Answer:
Cogeneration r is the use of a heat engine or power station to generate electricity and useful heat at the same time.
How many atoms are present in one formula unit of barium acetate, Ba(C2H302)2?
Answer:
i think 15
Explanation:
Answer: About Barium Acetate
All metallic acetates are inorganic salts containing a metal cation and the acetate anion, a univalent (-1 charge) polyatomic ion composed of two carbon atoms ionically bound to three hydrogen and two oxygen atoms (Symbol: CH3COO) for a total formula weight of 59.05. Hopefully i helped
Explanation:
21.Total mass of reactants always equals the total mass of the products true or false
Answer:
True
Explanation:
because its the law of conservation of mass
For each of the following acid-base reactions,
calculate the mass (in grams) of each acid necessary
to completely react with and neutralize 3.65 g of the
base.
Part A
HCl(aq) + NaOH(aq) → H2O(l) + NaCl(aq)
Part B
2 HNO3(aq) + Ca(OH)2(aq)
2 H2O(1) + C
Answer: A. 3.28 g of HCl
B. 6.30 g of [tex]HNO_3[/tex]
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} NaOH=\frac{3.65g}{40g/mol}=0.09moles[/tex]
[tex]\text{Moles of} Ca(OH)_2=\frac{3.65g}{74g/mol}=0.05moles[/tex]
a) [tex]HCl(aq)+NaOH(aq)\rightarrow H_2O(l)+NaCl(aq)[/tex]
According to stoichiometry :
1 mole of [tex]NaOH[/tex] require = 1 mole of [tex]HCl[/tex]
Thus 0.09 moles of [tex]NaOH[/tex] will require=[tex]\frac{1}{1}\times 0.09=0.09moles[/tex] of [tex]HCl[/tex]
Mass of [tex]HCl=moles\times {\text {Molar mass}}=0.09moles\times 36.5g/mol=3.28g[/tex]
b) [tex]2HNO_3(aq)+Ca(OH)_2(aq)\rightarrow 2H_2O(l)+Ca(NO_3)_2(aq)[/tex]
According to stoichiometry :
1 mole of [tex]Ca(OH)_2[/tex] require = 2 moles of [tex]HNO_3[/tex]
Thus 0.05 moles of [tex]Ca(OH)_2[/tex] will require=[tex]\frac{2}{1}\times 0.05=0.1moles[/tex] of [tex]HNO_3[/tex]
Mass of [tex]HNO_3=moles\times {\text {Molar mass}}=0.1moles\times 63g/mol=6.3g[/tex]
Plzz help
How many moles of H2O can be made from the complete reaction of 5.5 moles of C3H8? (Only enter the number, NO UNITS, and round to the tenth place, 1 decimal) Given: C3H8 + 5 O2 → 3 CO2. + 4 H2O
Answer:
22
Explanation:
5.5 mol C3H8 • (4 mol H2O / 1 mol C3H8 ) = 22 mol H2O
what is the molarity of a solution with 130g of CoCl2 in 1/2 liter? (can you show the steps please)
Answer:
2M
Explanation:
M=mol/L
1. Find moles of CoCl2
mass of substance/molar mass = 130/129.833 = 1.001 mol
3. Substitute in molarity equation
M=(1.001/0.5)
M= around 2M
The molarity of a solution with 130g of CoCl2 in 1/2 liter is 2M
HOW TO CALCULATE MOLARITY:
The molarity of a solution can be calculated by dividing the number of moles of that substance by its volume:Molarity = no. of moles ÷ volumeFirst, we convert 130g of CoCl2 to moles as follows:Molar mass of CoCl2 = 129.84 g/molmoles = 130g ÷ 129.84g/molmoles of CoCl2 = 1molMolarity of CoCl2 solution = 1mol ÷ 0.5LMolarity of CoCl2 = 2MTherefore, the molarity of a solution with 130g of CoCl2 in 1/2 liter is 2M.
Learn more at: https://brainly.com/question/15948514?referrer=searchResults