*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
Answer: Animal fibre
I hope this helped!
<!> Brainliest is appreciated! <!>
- Zack Slocum
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
Answer: c) Animal
Explanation: It is a protein based fibre so classified as animal fibre. Vegetable fibers are cellulose based.
Select the correct answer. Which of the below is an example of mimicry that enables prey species avoid predation
What are the answers? I assume you meant to attach a photo.
Answer:
Thus, the one that is an example of mimicry that enables prey species to avoid predation is a harmless organism imitating the look of a harmful one (option B).
Explanation:
Which of the following statements best defines the theoretical yield of a reaction?
a) The ratio of measured yield over actual yield
b) The amount of product measured after a reaction
c) The ratio of measured yield over stoichiometric yield
d)The maximum amount of product that can be obtained
The statement which best defines the theoretical yield of a reaction is the maximum amount of product that can be obtained.
What is yield of any reaction?Yield of any chemical reaction gives idea about the amount of product that will be produced by the chemical reaction between reactants.
Theoretical yield gives idea about the how much maximum yield of any product will be produced in the given chemical reaction by using the stoichiometry of the reaction.
Hence theoretical yield is the maximum amount of product that can be obtained.
To know more about theoretical yield, visit the below link:
https://brainly.com/question/25996347
#SPJ2
why are some metals such as copper and aluminium not magnetic
Answer:i dont know
Explanation:
I D
K
Consider the titration of 82.0 mL of 0.140 M Ba(OH)2 by 0.560 M HCl. Calculate the pH of the resulting solution after the following volumes of HCl have been added. (a) 0.0 mL WebAssign will check your answer for the correct number of significant figures. 13.447 Correct: Your answer is correct. (b) 15.0 mL WebAssign will check your answer for the correct number of significant figures. 12.25 Incorrect: Your answer is incorrect.
Answer:
a) pH = 13.447
b) pH = 13.176
Explanation:
Ba (OH)₂ is a strong base and ionizes completely in solution to give barium amend hydroxide ions.
The equation of the dissociation of Ba(OH)₂ is given below:
Ba(OH)₂ ----> Ba2+ + 2OH-
1 mole of Ba(OH)₂ produces 2 Moles of OH- ions
a) Before the addition of HCl, i.e.,when 0.00 mL of HCl has been added;
Concentration of hydroxide ions, [OH-] = 0.140 x 2 = 0.a) [OH-] = 0.100 x 2 = 0.280
pOH = -log [OH-]
pOH = -log (0.280)
pOH = 0.553
pH = 14 - 0.553= 13.447
b) pH when 15.0 mL HCl has been added
Moles Ba(OH)₂ = concentration × volume
Volume of Ba(OH)₂ = 82.0 mL = 0.082 L, concentration = 0.140 M
moles of Ba(OH)₂ = 0.082 x 0.140 = 0.01148 moles
moles OH- produced by 0.01148 moles of Ba(OH)₂ = 2 x 0.01148= 0.02296
moles HCl = 0.0150 L x 0.560 = 0.0084
moles of H+ produced by 0.0084 HCl = 0.0084
0.0084 H+ willnreact with 0.0084 moles of OH-
moles OH- left after the reaction = 0.02296 - 0.0084 = 0.01456 moles
total volume of new solution = (82 +15) mL = 97 mL => 0.097 L
Concentration of OH- ions = moles / volume
[OH-] = 0.01456 / 0.097 = 0.1501
pOH = -log [OH-]
pOH = -log (0.150)
pOH = 0.824
pH = 14 - 0.824
pH = 13.176
Explain why only one type of seismic wave was recorded at location B. (1 sentence only!)
Answer:
p wave
Explanation:
The P wave is designated the primary preliminary wave because it is the first to arrive at a seismic station after an earthquake. It travels at a speed usually less than 6 kilometers per second in the Earth's crust and jumps to 13 kilometers per second through the core.
A woman weighing 600 N is leaning on the ground with shoe soles with a total area of 0.04 m2. Calculate the pressure of the motors
Answer:
1.5×10^4
Explanation:
Pressure= force/area
P= 600/0.04
P= 15000
P= 1.5×10^4
● Human blood has a hydrogen ion concentration is 10-7.4 mol/L. What is the pH of the blood?
Explanation:
PH=14-POH
=14-2.6
=11.4
2C2H6 + 7O2 ------> 4CO2 + 6H2O
If you are given 10 grams of C2H6 and 10 grams of O2 how many grams of H2O would you produce? Hint: find the limiting reactant. Answer should have 3 decimal places.
Right answer gets brainliest
We convert the masses of our reactants to moles and use the stoichiometric coefficients to determine which one of our reactants will be limiting.
Dividing the mass of each reactant by its molar mass:
(10 g C2H6)(30.069 g/mol) = 0.3326 mol C2H6
(10 g O2)(31.999 g/mol) = 0.3125 mol O2.
Every 2 moles of C2H6 react with 7 moles of O2. So the number of moles of O2 needed to react completely with 0.3326 mol C2H6 would be (0.3326)(7/2) = 1.164 mol O2. That is far more than the number of moles of O2 that we are given: 0.3125 moles. Thus, O2 is our limiting reactant.
Since O2 is the limiting reactant, its quantity will determine how much of each product is formed. We are asked to find the number of grams (the mass) of H2O produced. The molar ratio between H2O and O2 per the balanced equation is 6:7. That is, for every 6 moles of H2O that is produced, 7 moles of O2 is used up (intuitively, then, the number of moles of H2O produced should be less than the number of moles of O2 consumed).
So, the number of moles of H2O produced would be (0.3125 mol O2)(6 mol H2O/7 mol O2) = 0.2679 mol H2O. We multiply by the molar mass of H2O to convert moles to mass: (0.2679 mol H2O)(18.0153 g/mol) = 4.826 g H2O.
Given 10 grams of C2H6 and 10 grams of O2, 4.826 g of H2O are produced.
How many joules of heat are needed to raise the temperature of 15g of aluminum from 28C to 99C if the specific heat of aluminum is .90 j/gC?
Answer:
In order to increase the temperature of 1 g of aluminium by 1∘C , you need to provide it with 0.90 J of heat
Explanation:
how can a match light without a spark
Answer:
Use friction
Explanation:
Friction is the force that stops something in motion. It also heats up something, creating a gravitational heat! A match striked against the lighter will create a flame, because of friction :)
a force is 24N is exerted on 2 carts. Cart A has a mass of 45kg and cart B has a mass of 25kg. Which cart will have the greater acceleration?
Please help. Which of these are chemical or physical change?
Answer:
Explanation:
a is a physical change you could put the peices back together
b is a chemical change because you cant unburn wood
c is a chemical change because you cant unbake it
d is a physicl change you could te your time and unmix it
Litmus turns
in acidic solutions.
green
yellow
blue
red
Answer:
red
Explanation:
red shows if solution is acidic
what is the relationship between heat and temperature?
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
Answer: according to ck12.org "Heat is the sum of all the kinetic energies of all the molecules of an object, while temperature is the average kinetic energy of the molecules of an object."
Explanation:
I hope this helped!
<!> Brainliest is appreciated! <!>
- Zack Slocum
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
Consider the reaction.
HCl(aq) + KOH(aq) ⟶ KCl(aq) + H2O(l)
In the reaction shown, HCl is
Answer:
the acid used to neutralize the base in oder to form a salt and water
Explain the relationship between the following terms: eutrophication, nutrients, dissolved oxygen leads, and algae.
Answer:
Eutrophication is the enrichment of a body of water with excessive nutrients (nitrogen and phosphorus), which causes algal growth and subsequent decline of dissolved oxygen after decomposition.
a repelling force occurs between two charged objects when the charges are
Answer:
Like signs.
Explanation:
When two charges are like signs, a repelling force will occur.
A sealed balloon occupies a volume of 250 mL at an unknown temperature. When the temperature is altered to 30 C, the balloon's volume becomes 0.5 L. Calculate the initial temperature of the air in the balloon.
Answer:
Initial temperature, T1 = 15°C
Explanation:
Given the following data;
Initial volume, V1 = 250 mL to Liters = 250/1000 = 0.25 L
Final temperature, T2 = 30°C
Final volume, V2 = 0.5 L
To find the initial temperature T1, we would use Charles' law.
Charles states that when the pressure of an ideal gas is kept constant, the volume of the gas is directly proportional to the absolute temperature of the gas.
Mathematically, Charles is given by;
[tex] \frac {V}{T} = K[/tex]
[tex] \frac{V1}{T1} = \frac{V2}{T2}[/tex]
Making T1 the subject of formula, we have;
[tex] T_{1}= \frac{V_{1}}{V_{2}} * T_{2}[/tex]
Substituting into the formula, we have;
[tex] T_{1}= \frac{0.25}{0.5} * 30[/tex]
[tex] T_{1}= 0.5 * 30 [/tex]
Initial temperature, T1 = 15°C
How many milliliters of 3.0 M H2SO4 are needed to make 450 mL of 0.10 M H2SO4?
_______ in saliva start the chemical digestion process
Answer:
amylase
Explanation:
How much heat is required to raise the temperature of 250.0 g of mercury by 52 degrees * C with a specific heat of 4.18
To raise the temperature of 250.0 g of mercury by 52°C with a specific heat capacity of 4.18 J/ g°C the heat required is 5.434×10¹ kJ.
What is specific heat capacity ?For a substance, it's specific heat capacity is the amount of energy required to raise the temperature of unit mass of that substance by 1°C.
If, specific heat capacity (c) = 4.18 J/ g°C
Mass of the substance (m) = 250.0 g
Change in temperature (ΔT) = 52°C
Energy (Q) = ?
Then mathematically the relation could be represented as
c = [tex]\frac{Q}{ \ m \ (\Delta\ T )}[/tex]
Therefore, [tex]Q = m\times c \times (\Delta\ T)[/tex]
[tex]Q = 250 \times 4.18 \times 52[/tex]
[tex]Q = 54,340 J\\Q = 5.434 \times 10^1 kJ[/tex]
So, to raise the temperature of 250.0 g of mercury by 52°C with a specific heat capacity of 4.18 J/ g°C the heat required is 5.434×10¹ kJ.
To know more on specific heat capacity, click on
https://brainly.com/question/27991746
#SPJ2
Which of the following best defines a spectrum?
A. The range of values of some property
B. The measurement of some property
C. A single value of some property
D. The change over time in the value of some property
SUBMIT
Answer:
The range of values of some property
Explanation:
A.pex, and the comments on the other answer
The best defines a spectrum is The range of values of some.
What is spectrum ?
A spectrum (plural spectra or spectrums) is a condition that is not limited to a specific set of values but can vary, without gaps, across a continuum. The word was first used scientifically in optics to describe the rainbow of colors in visible light after passing through a prism. As scientific understanding of light advanced, it came to apply to the entire electromagnetic spectrum. It thereby became a mapping of a range of magnitudes (wavelengths) to a range of qualities, which are the perceived "colors of the rainbow" and other properties which correspond to wavelengths that lie outside of the visible light spectrum.
Spectrum has since been applied by analogy to topics outside optics. Thus, one might talk about the "spectrum of political opinion", or the "spectrum of activity" of a drug, or the "autism spectrum". In these uses, values within a spectrum may not be associated with precisely quantifiable numbers or definitions. Such uses imply a broad range of conditions or behaviors grouped together and studied under a single title for ease of discussion. Nonscientific uses of the term spectrum are sometimes misleading. For instance, a single left–right spectrum of political opinion does not capture the full range of people's political beliefs. Political scientists use a variety of biaxial and multiaxial systems to more accurately characterize political opinion.
Learn more about spectrum
https://brainly.com/question/23118593
#SPJ2
Can someone help me with this. Thank you
Answer:
Location x is experiencing daytime because it is facing directly to the sun.
Explanation:
From a background understanding of the solar system, the side of the planet facing the sun will be experiencing daytime while the other side of the planet will be experiencing either partial or total darkness depending on the location.
From the diagram given above, we can see clearly that location x is facing the sun and as such, light rays from the sun lightens the location. When this happens, location x will be experiencing daytime.
In conclusion, location x is experiencing daytime because it is facing directly to the sun.
As you move from left to right within a period (row), what is the pattern?
If 25.0 g of iron(III) phosphate reacts with excess sodium sulfate, how many molecules of sodium phosphate can be made?
Answer:
so mucjsuat least amount of soduim is will be 25percent
I need help with this :/
Answer:
Blank 1: 1
Blank 2: 2
Blank 3: 1
Blank 4: 1
Explanation:
Assuming this is to balance the equation, write out the amount of each element you have on the reactants side and on the products side
Reactants Products
Ca 1 Ca 1
C 2 C 2
H 2 H 4
O 1 O 2
Comparing the two, we can see that hydrogen and oxygen have different amounts between reactants and products. Therefore, we need to multiply by some number to get the two equal. If we multiply the reactants by 2 we will get the correct amount in the products. So we put a 2 in front of the H₂O to signify this.
The balanced chemical reaction is
CaC₂ + 2 H₂O --> C₂H₂ + Ca(OH)₂
I need the 3 questions !!! About Rubidium (Rb)
ASAP PLEASE DUE IN LIKE 20 min
Answer:
419kJ/mol 5,0,0,+12That catches fire spontaneouslyExplanation:
1. Topic: Chemistry
ElementFirst Ionization Energy (kJ/mol) Lithium520Sodium496Rubidium403Cesium376According to the above table, which is most likely to be the first ionization energy for potassium?
536kJ/mol 504kJ/mol 419kJ/mol 391kJ/mol 358kJ/mol2. Topic: Chemistry, Atom
The correct set of four quantum numbers for the valence electrons of the rubidium atom (Z=37) is:
5,1,1,+12 5,0,1,+12 5,0,0,+12 5,1,0,+123. Rubidium and cesium are pyrophoric. Here the term pyrophoric means:
That hardly catches fireThat does not catch fire at all That catches fire spontaneously None of theseEvaluate three communication skills that can assist you in sustaining positive relationships
1. Accept and celebrate differences. One of the biggest challenges we experience in relationships is that we are all different. We can perceive the world in many ways. Certainly astumbling block that we come across when we try to build relationships is a desire or an expectation that people will think like we do and, in this way, it is so much easier to create a rapport. We feel more comfortable when we feel that people “get” us and can see our point of view. Life, however, would be very dull if we were all the same and, while we may find it initially easier, the novelty of sameness soon would wear off. So accepting and celebrating that we are all different is a great starting point.
2. Listen effectively. Listening is a crucial skill in boosting another person’s self-esteem, the silent form of flattery that makes people feel supported and valued. Listening and understanding what others communicate to us is the most important part of successful interaction and vice versa.
Active or reflective listening is the single most useful and important listening skill. In active listening, we also are genuinely interested in understanding what the other person is thinking, feeling, wanting, or what the message means, and we are active in checking out our understanding before we respond with our own new message. We restate or paraphrase our understanding of their message and reflect it back to the sender for verification. This verification or feedback process is what distinguishes active listening and makes it effective.
3. Give people your time. Giving time to people is also a huge gift. In a world where time is of the essence and we are trying to fit in more than one lifetime, we don’t always have the time to give to our loved ones, friends, and work colleagues. Technology has somewhat eroded our ability to build real rapport and we attempt to multi-task by texting and talking at the same time.
Being present in the time you give to people is also important, so that, when you are with someone, you are truly with someone and not dwelling in the past or worrying about the future. The connection we make with other people is the verytouchstone of our existence, and devoting time, energy, and effort to developing and building relationships is one of the most valuable life skills.
Determine the mass of ammonium chloride, NH4CI, required to prepare 0.250 L of a 0.35 M solution of ammonium chloride.
If a compound contains a poly atomic ion then what type of compound is it A. Convalent Compound B. Ionic Compound
Answer:
B. Ionic Compound
Explanation:
An ionic compound is that compound which contains a positively charged ion called CATION and a negatively charged ion called ANION. The cation loses or transfers electrons to the anion, hence, making the former (cation) positive and the latter (anion) negative.
A polyatomic ion is an ion that contains more than one type of atom e.g OH-, NO3²-, CO3²- etc. A polyatomic ion usually has an overall charge formed from the charges of the individual atoms that makes it up. For example, in OH-, the overall charge is -1.
Since a polyatomic ion can have an overall positive or negative charge, it must enter a reaction with another ion that complements it i.e. a negative polyatomic ion will react with a positive ion to neutralize its charge. Hence, this forms an IONIC COMPOUND. This is why most compounds with polyatomic ions are IONIC COMPOUNDS.
For example, CaCO3 is an ionic compound formed when Ca²+ (cation) reacts with the polyatomic anion: CO3²-