Answer:
C
Explanation:
Assuming you had a few typos in the equations, I would say C
I am going to assume the reaction
_C2H6 + _O2 → _CO2 + _H2O
Right now, there is enough hydrogen to make 3 water molecules, but since oxygen comes in groups of 2, it wouldn't work.
Therefore, we need 2 ethane molecules.
2C2H6 + _O2 → _CO2 + _H2O
Then balance the right side with the carbons and hydrogens
2C2H6 + _O2 → 4CO2 + 6H2O
So we need 4 O2's in carbon dioxide and 3 O2's in water (Since water uses 1 oxygen molecule per 2 hydrogens). Hence we will need 7 oxygens
2C2H6 + 7O2 → 4CO2 + 6H2O
And assuming errors in the typing, C should be the answer (if this matches)
Which One Is the Wrong One?
Answer:
I would say the second one it's the wrong
When two solutions are combined, what evidence would show a chemical
reaction has occurred? *
temperature remains constant
a precipitate forms
volume increases
In a chemical reaction, the mass of the reactants is 13.3 grams. Which of the
following could represent the mass of the products?
Answer:
26.6
Explanation:
Balance the following chemical
equation by providing the correct
coefficients.
Answer:
1 Pb(NO3)2 + 1 Na2CrO4 -> 1 PbCrO4 + 2 NaNO3
What are the 3 main types of clouds?
Answer:
Cumulus, Cirrus, and Stratus
Explanation:
So Cumulus Clouds are those puffy-shaped clouds, the ones that look the most solid like you could just walk on them. Cirrus are those wispy clouds that are often very high up. And Stratus Clouds are the low clouds that often cover the entire sky.
hope this helps:)
HELP! What are 5 changes for testing out a fidget spinner no websites
Answer:
Explanation:
Can you explain a bit further? once u do, ill edit my answer and tell you :) But to use a fidget spinner, u have to put ur thumb at the bottom and index finger at the top, and spin it with you other fingers if thats what you meant
Find the number of Grams
Show all the steps you did to arrive at your answer.
4.00 moles of Cu(CN)2
Answer: 462 g
Explanation:molar mass is M= 63.55 +2·(12.01+14.01)= 115.59 g/mol.
Mass m= n·M = 4.0 mol·115.59 g/mol= 462.36 g
Calculate the volume in mL of 53.2 g of .251M solution of HCl.
Answer:
5.813 mL
Explanation:
You need to use the formula : vol = mass / molar mass x molarity
the molar mass of HCl is 36.46 and the problem gives you the rest of the equation
0.251M x 36.46 = 9.151
53.2g / 9.151 = 5.813 mL
*I don't know some of the units so that's why some of them are blank sorry
*I'm also sorry if this is wrong but it's what I did so..
Write your question here (Keep it simple and clear to get the best answer) Explain why ammonia gas is not collected over water
Answer:
Because of the solubility of ammonia gas in water, it is not collected over water.
Explanation:
Gases prepared in the laboratory are often collected by a technique called water displacement. A bottle is filled with water and placed upside-down in a trough or container of water. The reaction flask is connected to the bottle of water by means of a rubber or glass tubing which is fed under the water bottle . As the gas is produced in the reaction flask, it enters the bottle and displaces the water in it. When the bottle is full of the gas, it is then sealed. The volume of gas in the bottle can be used to determine the amount of gas produced in the reaction. Usually, the gas collected is present in addition to water vapor in the bottle.
Gases that are collected over water must not react with or dissolve in water.
Ammonia gas is very soluble in water. The solubility is due to the readiness with which it forms hydrogen bonds with water to produce aqueous ammonia, NH₃.H₂O.
Aqueous ammonia ionizes partially to produce ammonium ions, NH₄+ and hydroxide ions, OH-. Because of the solubility of ammonia gas in water, it is not collected over water.
What happens when Sulphuric acid is added to into Barium Chloride solution?
Answer:
please give me brainlist and follow
Explanation:
When dilute sulphuric acid is added to barium chloride solution, barium sulphate is formed as a precipitate and hydrogen chloride is formed in aqueous solution.
what is the wavelength of a photon with an energy of 3.38 x 10-19J?
Answer:
C. 588 nm
Explanation:
Answer:
588 mm
Explanation:
pb(No3)2(aq) +2KCI(aq)---PbCl2(s)+KNO2(aq). how many grams of PbCl2 solution will react with a 0.46 L of a 0.101m KCI solution
Answer:
6.3986g
Explanation:
The balanced chemical equation of this reaction is as follows:
Pb(NO3)2(aq) + 2KCl (aq) → PbCl2(s) + 2KNO3(aq)
In this equation, 2 moles of KCl solution will produce 1 mole of PbCl2.
To calculate the number of moles of PbCl2 produced, we use the formula:
Molarity = number of moles (n) ÷ volume (V)
0.101 = n/0.46
n = 0.046mol of KCl
If 2 moles of KCl solution will produce 1 mole of PbCl2
Then, 0.046mol of KCl will be react to produce (0.046 × 1/2) of PbCl2
0.046 × 1/2 = 0.023mol of PbCl2
To find the mass of PbCl2 using mole = mass ÷ molar mass
Molar mass of PbCl2 = 207.2 + 35.5(2)
= 207.2 + 71
= 278.2g/mol
0.023 = mass/278.2
mass = 6.3986g
Answer:
Can you help me with other question please
i need helpppp
blank 1:
blank 2:
blank 3:
blank 4:
Answer:
Fe₂(SO₄)₃ + 6KOH —> 3K₂SO₄ + 2Fe(OH)₃
The coefficients are: 1, 6, 3, 2
Explanation:
__Fe₂(SO₄)₃ + __KOH —> __K₂SO₄ + __Fe(OH)₃
To determine the correct coefficients, we shall balance the equation. This can be obtained as follow:
Fe₂(SO₄)₃ + KOH —> K₂SO₄ + Fe(OH)₃
There are 2 atoms of Fe on the left side and 1 atom on the right side. It can be balance by writing 2 before Fe(OH)₃ as shown below:
Fe₂(SO₄)₃ + KOH —> K₂SO₄ + 2Fe(OH)₃
There are 6 atoms of OH on the right side and 1 atom on the left side. It can be balance by writing 6 before KOH as shown below:
Fe₂(SO₄)₃ + 6KOH —> K₂SO₄ + 2Fe(OH)₃
There are 6 atoms of K on the left side and 2 atoms on the right side. It can be balance by writing 3 before K₂SO₄ as shown below:
Fe₂(SO₄)₃ + 6KOH —> 3K₂SO₄ + 2Fe(OH)₃
Now, the equation is balanced.
Therefore, the coefficients are: 1, 6, 3, 2
From the balanced reaction below, when you have 3.33 moles of (NH4)2Cr2O7, how many grams of N2 will be produced
Answer:
[tex]m_{N_2}=93.3gN_2[/tex]
Explanation:
Hello there!
In this case, for this stoichiometry-based problem, it is firstly necessary to realize that the decomposition of ammonium dichromate is given by:
[tex](NH_4)_2Cr_2O_7(s)\rightarrow N_2(g)+4H_2O(l)+Cr_2O_3(s)[/tex]
Thus, since the mole ratio between ammonium dichromate and the gaseous nitrogen (molar mass = 28.02 g/mol) is 1:1, we can compute the produced mass of the latter via stoichiometry as shown below:
[tex]m_{N_2}=3.33mol(NH_4)_2Cr_2O_7*\frac{1molN_2}{1mol(NH_4)_2Cr_2O_7}*\frac{28.01gN_2}{1molN_2}\\\\ m_{N_2}=93.3gN_2[/tex]
Best regards!
Explain what is happening during a redox reaction.
Answer:
Redox is a sort of compound response where the oxidation conditions of particles are changed. Redox responses are described by the real or formal exchange of electrons between substance species, frequently with one animal groups going through oxidation while another species goes through decrease
Explanation:
Brainliest?
(iii) Explain the following statements about drugs:
a. You can be arrested by the police for possessing heroin
b.All drugs are dangerous.
Answer:
A
Explanation:
Heroine destroying the body system
What is Niels Bohr’s Theory
1.
What is the molarity of a 3.6 L solution with 104 g of sucrose?
Answer:
.084 M
Explanation:
Molar mass of sucrose = 342.3
The formula to find molarity is moles of solute / liters of solution
Since we need to turn grams to moles for this equation we do 104 / 342.3 = 0.304
Now we can use the equation listed above. .304 / 3.6 = 0.084 M
If you can solve these thank you I will mark brainly.ASAP
Answer:Number 2 might be the second one
Explanation:
what is the molarity of a solution that contains 4.42 moles of Rubidium nitrate in 3.0 liter solution
Answer:
The molarity of the solution is 1.473 [tex]\frac{moles}{liter}[/tex].
Explanation:
Molar concentration is a measure of the concentration of a solute in a solution, be it some molecular, ionic or atomic species.
So, Molarity or Molar Concentration is the number of moles of solute that are dissolved in a certain volume.
Molarity is determined by:
[tex]Molarity=\frac{number of moles of solute}{volume}[/tex]
Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].
In this case:
number of moles of solute= 4.42 molesvolume= 3 LReplacing:
[tex]Molarity=\frac{4.42 moles}{3 L}[/tex]
Molarity= 1.473 [tex]\frac{moles}{liter}[/tex]
The molarity of the solution is 1.473 [tex]\frac{moles}{liter}[/tex].
You have been shipwrecked on a deserted island with no running water/fresh water, you have your clothes and a plastic bag containing your phone out of
charge and some sunscreen) How are you going to survive and escape?
Answer:
i have no clue
Explanation:
When hydrogen peroxide (H2O2) is used in rocket fuel, it produces water and oxygen (O2): Can someone help with parts B and C?
Answer:
Explanation: A foam forms when bubbles of a gas are trapped in a liquid or solid. In this case oxygen is generated when hydrogen peroxide breaks down into oxygen and water on contact with catalase, an enzyme found in liver. Enzymes are special protein molecules that speed up chemical reactions.
?
9. Oxygen will have a positive oxidation number
when combined with
(1) fluorine
(3) bromine
(2) chlorine
(4) iodine
in
Answer:
Flourine
Explanation:
Oxidation number will be +1 for oxygen and -1 for Flourine
According to the Law of Conservation of Energy, energy ______.
New concept cars in the Detroit Auto Show feature engines that burn hydrogen gas in air to produce water vapor. Suppose that fuel tank contains 150. L of H2 gas at 20.0 atm pressure at 25.0˚C. If all of this gas is burned, what mass (in grams) of water vapor is produced?
Answer:
247.2g
Explanation:
Using the general gas law equation as follows:
PV = nRT
Where;
P = pressure (atm)
V = volume (L)
n = number of moles (mol)
R = gas law constant (0.0821 Latm/molK)
T = temperature (K)
According to the information in this question, a fuel tank contains 150. L (V) of H2 gas at 20.0 atm (P) at 25.0˚C (T)
Temperature = 25°C = 25 + 273 = 298K
Using PV = nRT
20 × 150 = n × 0.0821 × 298
3000 = 24.4658n
n = 3000/24.4658
n = 122.62
n = 122.6mol
Using the formula, mole = mass/molar mass, to find the mass of H2 gas.
Molar mass of H2 = 1.008(2)
= 2.016g/mol
122.6 = mass/2.016
mass = 122.6 × 2.016
mass = 247.2g.
Tetrachloroethene, C2C14 is a solvent used in many dry cleaning processes.
Write the empirical formula for tetrachloroethene.
An empirical formula presents the atoms of all the elements with the most simplified whole number ratios. In other words, divide each subscript by their greatest common factor.
The greatest common factor of 2 and 4 is 2.
2/2 = 1
4/2 = 2
So, the empirical formula for tetrachloroethene is CCl₂.
For a reaction which change can increase the rates of reaction?
Answer:
temperature!!!
Explanation:
Reactant concentration, the physical state of the reactants, and surface area, temperature, and the presence of a catalyst are the four main factors that affect reaction rate.
Tara is performing a chemical experiment, at one point she needed to know whether the solution is acidic or basic so she used the PH meter to measure the solution. She got a reading of 13.4,
1. Is the solution acidic or base? Explain why.
2. What will happen to the PH when she will add water to the solution?
It is a base because its pH is greater than 7
(not sure about the second sorry!)
PLEASE HELP SOMEONE PLEASEEEE
Answer:
the answer is b
hope this helps you!!
Have a lovely day!
-millie :D
3.
Which quantity of salt will form an
unsaturated solution in 100 g of water
at 50°C?
(1) 43 g of KCI
(2) 50 g of NH4Cl
(3) 100 g of KNO,
(4) 116 g of NaNO,
Answer:
Option D, 116 g of NaNO3
Explanation:
An unsaturated solution is the one in which the amount of salt dissolved in more than the maximum amount of salt that can be dissolved in it.
At 50 degree Celsius, 37 grams of salt can be dissolved in 100 ml of water. Hence, 116 gram of salt is the correct answer