2.0 M H2SO4 solution.calculate the pH​

In general, salts (formed during a neutralization reaction) are ionic compounds that are soluble in water and dissociate in solution into ions that conduct electricity. Out of the six statements given, there are three related statements that rehash the foregoing, and there are three related statements that are collectively incorrect.

Statements A, B, and D are (generally) true regarding salts formed during a neutralization reaction. When you consider that the net ionic equation of many acid-base neutralization reactions is H⁺(aq) + OH⁻(aq) → H₂O(l), the counterions of the H⁺(aq) and OH⁻(aq) are the aqueous spectator ions that comprise the salt. These ions are electrolytes, as they are charged species that can carry a current in solution; they are ionic compounds by definition since they're composed of cations and anions; and, as aqueous species, they're clearly dissolved in water.

Statements C, E, and F, as a whole, generally aren't true of such salts.

Answer:

d

digestive system

Explanation

Answer: 7.88375g

Explanation:

Here is the dimensional analysis table

7g O2 | 1 mol O2 | 2 mol H2O | 18.02 g H2O

| 32 g O2 | 1 mol O2 | 1 mol H2O

You use grams to convert to moles of O2, then use that to find grams of H20

Answer:

[tex]Ka=3.98x10^{-4}[/tex]

Explanation:

Hello there!

In this case, since the modelling of titration problems can be approached via the Henderson-Hasselbach equation to set up a relationship between pH, pKa and the concentration of the acid and its conjugate base, we can write:

[tex]pH=pKa+log(\frac{[NO_2^-]}{[HNO_2]} )[/tex]

Whereas the pH is given as 3.14 and the concentrations are the same, that is why the pH would be equal to the pKa as the logarithm gets 0 (log(1)=0); thus, we can calculate the Ka via:

[tex]Ka=10^{-pKa}=10^{-3.14}\\\\Ka=3.98x10^{-4}[/tex]

Best regards!

Answer:

1085° C

Explanation:

From the phase diagram of Ag-Cu shown below:

The minimum value of the high-temp required to be selected for the furnace is: 1085° C

This is on the grounds that the furnace should be chosen to such an extent that it should melt any sort of possible material including pure Cu that melts and liquefies at the temperature of 1085° C.

Answer:

Explanation:

There is a formula for this:

M = DRT/P where M = molar mass. This just derived from PV = nRT where you say n = grams/molar mass. However, just with this formula, we can get D which is density at STP (1 atm and 273K). We find that D = 6.52g/L.

Answer:

Imole/C=129 Directions Show All Of Your Work For Each Of The Following Problems. 1.

Explanation:

Answer:

14.91 mL

Explanation:

Assuming the weak acid is monoprotic, we can solve this problem using the equation:

Where subscript 1 stands for the Volume and Concentration of the weak acid, while 2 stands for those of NaOH.

We input the data:

And solve for V₂:

The volume of 0.1817 M NaOH has to be added to reach the equivalence point is 14.91 mL.

Volume for the given solution will be calculated from the below equation:

M₁V₁ = M₂V₂, where

M₁ = Molarity of weak acid = 0.1084 M

V₁ = volume of weak acid = 25 mL

M₂ = molarity of NaOH = 0.1817 M

V₂ = volume of NaOH = to find?

On putting all these values on the above equation and calculate for V₂ as:
V₂ = (0.1084)(25) / (0.1817) = 14.91 mL

Hence required volume is 14.91 mL.

To know more about molarity, visit the below link:
https://brainly.com/question/489225

Answer: Although the rocks of the produced by similar processes but their chemical composition may vary dependent upon the type of mineral present in these rocks so the color of the rock also varies depending upon the mineral composition.

Explanation:

The rocks are made by basic steps like disintegration of parent rock material, erosion, crystallization, metamorphism, and sedimentation. These basic steps are common in same kind of rocks but their color may vary because of the mineral composition in them for example, Rhyolite is of light colored because of the presence of quartz mineral present in it.

Answer:

To explain what caused this mass extinction, scientists have focused on events that would have altered our planet's climate in dramatic, powerful ways. The leading theory is that a huge asteroid or comet slammed into Earth 65 million years ago, blocking sunlight, changing the climate and setting off global wildfires.

Answer:

3.6 mol H₂

Explanation:

In order to convert from N₂ moles to H₂ moles we need to use a conversion factor. This conversion factor has to have N₂ moles in the denominator and H₂ moles in the numerator, using the stoichiometric coefficients of the reaction, as follows:

Answer: polyatomic

Explanation:hope you find helpful

Answer:

Exercise 1

a)  140 m

b)  100 m

c)  180 m

d) 140 m

Exercise 2

a) 20 yards

b) 30 yards

c) 20 yards

d) 55 yards

Exercise 3

a)  11 Kilometers

b) 7 Kilometers

Explanation:

Exercise 1

Distance from B to C = 140 m

Distance from  to D = 100 m

Total distance = 100+40+40 = 180 m

Total displacement i.e. distance between A and D is 140 m

Exercise 2

a) Distance from B to C = 35 -15 = 20 yards

b) Distance from C to D  = 5 + 35  = 30 yards

c) Distance from B to D = 5 + 15 = 20 yards

d) Displacement = 5 + 50 = 55 yards

Exercise 3

a) The total distance travelled = 5 + 2 + 4 = 11 Kilometers

b) Displacement = 5-2 + 4 = 7 Kilometers

Answer:

A.

Explanation:

zinc and hydrochloric acid reacts to form zinc chloride and hydrogen.

hope it helps. :)

Answer:150

Explanation:I think because f=MxA and the mass is 37.5 kg while acceleation is 4 m/s^2  and when you multiply that is gets 150 so F=150 N

Answer: 31.9 g of KOH can be produced from 22.2 g of KOH

Explanation:

To calculate the moles :

[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]    

[tex]\text{Moles of} K=\frac{22.2g}{39g/mol}=0.57moles[/tex]  

[tex]2K+2H_2O\rightarrow 2KOH+H_2[/tex]  

According to stoichiometry :

2 moles of [tex]K[/tex] produce = 2 moles of [tex]KOH[/tex]

Thus 0.57 moles of [tex]K[/tex] will produce=[tex]\frac{2}{2}\times 0.57=0.57moles[/tex]  of [tex]KOH[/tex]

Mass of [tex]KOH=moles\times {\text {Molar mass}}=0.57moles\times 56g/mol=31.9g[/tex]

Thus 31.9 g of KOH can be produced from 22.2 g of KOH

Answer:

copper hiiiiiiiiiiiii

0.711 moles C

Math

Pre-Algebra

Order of Operations: BPEMDAS

Chemistry

Atomic Structure

Stoichiometry

Step 1: Define

[Given] 4.28 × 10²³ atoms C

[Solve] moles C

Step 2: Identify Conversions

Avogadro's Number

Step 3: Convert

Step 4: Check

Follow sig fig rules and round. We are given 3 sig figs.

0.710727 moles C ≈ 0.711 moles C

Answer:

Phototropism.

Explanation:

Phototropism is the phenomenon of plants growing in response to light. This is a response to the plants to align or steer towards the source of sunlight, thereby becoming the 'path' to their growth.

The term "photo" means light and "tropism" means "growth" or movement towards". So, we can safely say that phototropism is the scientific and natural phenomenon of plants growing towards or in response to the sunlight.

Thus, the correct answer is phototropism.

Answer:

Bromine pentafluoride, BrF5

bromine pentafluoride is an interhalogen compound and a fluoride of bromine. It is a strong fluorination reagent. BrF5 finds use in oxygen isotope analysis.

The chemical formula of a compound is obtained from the symbols of the elements that compose the compound. The formula of bromine pentachloride is BrCl5.

In chemistry, compounds are represented using shorthand symbols called chemical formula.

The chemical formula is composed of the symbols of the respective elements that compose the compound as well as the number of atoms of each element that compose the compound.

For the compound bromine pentachloride, there is one bromine atom and five chlorine atoms giving the formula BrCl5.

Learn more: https://brainly.com/question/11995171

Answer:

Hypoflorous acid, HOF

Explanation:

From the question, we're told that the helium atoms effuses 3 times than the said gas X.

We can determine the rate of effusion by using the formula

r is inversely proportional to 1/√M, where M is the molecular mass of the gas.

And also,

r is inversely proportional to 1/t, where t is the time taken for effusion.

From both formulas I listed, we can conclude that t is directly proportional to √M. And thus we proceed.

The molecular mass of Helium is 4.

tHe = tX/3, where tx is the time taken for the unknown gas X

As of yet, we don't know the molecular mass of X. Next, we say that

tX/tHe =√Mx/MHe

3 = √Mx/4

If we square both the sides, to remove the square root, we have

9 = Mx/4

Mx = 36

The molecular mass of the unknown gas X is 36.

Answer:

c ammonium hydroxide nh4oh has higher ph value and its a base

plz mark me branliest

Answer:

c) ammonium hydroxide

Explanation:

ammonium hydroxide nh4oh has higher ph value, and it is an alkaline

Answer:

Following are the solution to these question:

Explanation:

Simple diffusion implies which molecules can move across a cell membrane instead of using the incorporated protein structure channels. Its flow of molecules across these canals is enabled by diffusion. It has steroid hormones and N2.

Facilitated diffusion of molecules via cell membranes, or active transportation, which would be the random mass transit process of molecules or ions via unique cellular membranes from the transmembrane. It has K+ and Glucose.

Answer:

pH = 5.35

Explanation:

Given 1.60 grams sodium acetate (NaOAc(aq))*** added to 50ml of 0.10M acetic acid (HOAc(aq)) solution.

Applying common ion effect keeping in mind that the addition of NaOAc provides the common-ion (OAc⁻).

      HOAc(aq) ⇄          H⁺(aq)            +                 OAc⁻(aq)

 I      0.10m          1.32 x 10⁻³M ≈ ∅M*     (1.6g/82.03g/mol) / 0.050L = 0.39M

 C       -x                         +x                                0.39M + x ≈ 0.39M**

 E    0.10M - x                  x                                    0.39M

       ≈ 0.10M

Ka = [H⁺][OAC⁻]/[HOAC] => [H⁺] = Ka·[HOAc] / [OAc⁻]

[H⁺] = (1.75 X 10⁻⁵)(0.10) / (0.39) = 4.5 x 10⁻⁶M

∴ pH = -log[H⁺] = -log(4.5 x 10⁻⁶) = -(-5.35) = 5.35

_______________________________________________

* [H⁺] before adding NaOAc = SqrRt(Ka · [HOAc]) = SqrRt(1.75 x 10⁻⁵· 0.10) = 1.32 x 10⁻³M. Since this concentration value is so small, the initial [H⁺] is assumed to be zero molar (∅M).

** The added [H⁺] is negligible and dropped in the ICE table. That is, adding ~[H⁺] in the order of 10⁻³M does not change the H⁺ ion concentration sufficiently to affect problem outcome and is therefore dropped in the ICE table.

*** Acetic Acid and Sodium Acetate are frequently written HOAc and NaOAc where the OAc⁻ anion is the acetate ion (CH₃COO⁻) for brevity.

The pH of the solution measures the acid of the liquid throughout the molar concentration of hydrogen ions in a solution.

[tex]\bold{CH_3COONa \ mass = 1.60\ g}\\\\[/tex]

Solution Volume (V) [tex]=50.0\ mL =0.05\ L\\\\[/tex]

[tex]\bold{CH3COONa \ molarity =0.10\ M }[/tex]

[tex]\bold{\text{Calculating the CH3COONa moles} =\frac{mass}{molar\ mass}}[/tex]

                                                       [tex]= \frac{1.60\ g}{82.03\frac{g}{mol}} \\\\=0.0195\ mol\\\\[/tex]

[tex]\bold{M = \frac{ \text{amount of solute moles} } { \text{solution volume in L} }}[/tex]

     [tex]= \frac{0.0195\ mol}{0.05\ L}\\\\ =0.39\ M[/tex]

Using Henderson Hasselbach equation:

[tex]\bold{pH = -\log K_{a} + \log{[salt]}{[acid]}}\\\\[/tex]

     [tex]=\bold{ -\log (1.75\times 10^{-5}) + \log ( \frac{0.39}{0.10}) }\\\\=\bold{ 4.757 + \log (3.9)}\\\\=\bold{ 4.757 + 0.5910}\\\\=\bold{ 5.348}\\\\=\bold{ 5.35}\\[/tex]

So, the final answer is "5.35".

Learn more:

brainly.com/question/1195974

Answer:

Empirical formula: CH

Molecular formula: C₆H₆

Explanation:

Based on the combustion of a hydrocarbon, the moles of CO₂ = Moles of Carbon in the hydrocarbon and the moles of H₂O = 1/2 moles of hydrogen in the hydrocarbon.

The empirical formula is the simplest whole number of atoms present in a molecule. With the moles of C and H we can find empirical formula:

Moles C -Molar mass CO₂ = 44.01g/mol-:

13.82g * (1mol / 44.01g) = 0.314 moles C

Moles H -Molar mass H₂O = 18.01g/mol-:

2.829g H₂O * (1mol / 18.01g) = 0.157 moles H₂O * (2mol H / 1mol H₂O) = 0.314 moles of H

The ratio of moles H: moles C:

0.314 moles / 0.314 moles = 1

That means empirical formula is:

With the molecular weight and empirical formula we can find the molecular formula:

Molar mass CH = 12.01g/mol+1.01g/mol = 13.02g/mol

As the molecular weight of the molecule is 78.11amu = 78.11g/mol, there are:

78.11g/mol / 13.02g/mol = 6 times the empirical formula in the molecular formula

That means molecular formula is:

Answer:

Rain is a liquid and hail is a solid.

We have that the grams of iron contained 4.06X10^24 atoms of iron is

g= 376.6g

From the question we are told

How many grams of iron contain 4.06X10^24 atoms of iron?

Generally the equation for the Moles of Iron   is mathematically given as

[tex]M=\frac{4.06x10^24}{6.02x10^23} \\\\M=6.744moles[/tex]

Therefore

Where Molar mass of Iron =55.845

Generally the equation for the mass   is mathematically given as

g= 6.744  x 55.85

g= 376.6g

Therefore

the grams of iron contained 4.06X10^24 atoms of iron is

g= 376.6g

For more information on this visit

https://brainly.com/question/17756498

Answer:

69

Explanation: