In linear equation, 3f² + 8f + 16 feet is the length of the fourth side of the room.
What is linear equation?
An algebraic equation with simply a constant and a first- order( direct) element, similar as y = mx b, where m is the pitch and b is the y- intercept, is known as a linear equation.
The below is sometimes appertained to as a" direct equation of two variables," where y and x are the variables. Equations whose variables have a power of one are called direct equations. One illustration with only one variable is where layoff b = 0, where a and b are real values and x is the variable.
= 5f² + 19f + 11 - 6f - 5f + 7 - 2f² - 2
= 3f² + 8f + 16 feet
Learn more about Linear equation
brainly.com/question/11897796
#SPJ1
The expression that represent the length of the fourth side of the room is [tex]3f^2 + 8f + 16[/tex].
What is expression ?
Mathematical expressions consist of at least two numbers or variables, at least one arithmetic operation, and a statement. It's possible to multiply, divide, add, or subtract with this mathematical operation. Unknown variables, integers, and arithmetic operators are the components of an algebraic expression. There are no symbols for equality or inequality in it.
Here Total length of the room = [tex]5f^2+19f+11[/tex]
Three sides length of the room = 6f , 5f-8 and [tex]2f^2+2[/tex]
Fourth side = Total length - sum of length of three sides
=> [tex]5f^2+19f+11-(6f+5f-7+2f^2+2)[/tex]
=> [tex]5f^2+ 19f + 11 - 6f - 5f + 7 - 2f^2 - 2[/tex]
=> [tex]3f^2 + 8f + 16[/tex] .
The expression that represent the length of the fourth side of the room is [tex]3f^2 + 8f + 16[/tex].
To learn more about expression refer the below link
https://brainly.com/question/112703
#SPJ1
the area covered by the hour hand of a wall clock between time 4 : 26 and 6 : 50 is what percent of the area covered by it in 15 hours?
Step-by-step explanation:
From 4:26 to 6:50 is 2 hr and 24 in = 2 24/60 hrs = 2.4 hours
2.4 hrs is what percent of 15 hrs ?
2.4 / 15 * 100% = 16%
An animal population N(t) is modeled by the differential equation:
dN/dt = -0. 001N(N - 110)(N - 99). If N(0)=A, where A is a positive integer, what is the maximum value of the positive integer A such that extinction will occur?
For the given integer, the maximum starting population size that will eventually lead to extinction is 98, since any larger value will result in the population either stabilizing at a positive value or growing indefinitely.
The equation in question is:
dN/dt = -0.001N(N - 110)(N - 99)
Here, N represents the population size, and dN/dt represents the rate of change of the population with respect to time. The right-hand side of the equation tells us how the population size changes over time, and it's determined by the current population size N, as well as the two constants 110 and 99.
We can do this by setting dN/dt equal to zero and solving for N:
dN/dt = -0.001N(N - 110)(N - 99) = 0
=> N = 0, N = 99, N = 110
We can then plot the direction field (i.e., arrows indicating the direction of change) on each interval, and use this to determine the behavior of the solution curve. In this case, we can see that the direction of the arrows changes at each critical point, indicating that the population behavior switches between growing and declining as we move from one interval to the next.
Specifically, we can see that if the initial population size A is less than 99, the population will decline to extinction. If the initial population size is between 99 and 110, the population will initially decline but then grow and eventually stabilize at N = 110. If the initial population size is greater than 110, the population will grow exponentially and tend towards infinity.
To know more about integer here
https://brainly.com/question/15276410
#SPJ4
A school has members of 6000 out of which 1200 are girls find the probability of people who are boys
Answer: 80% are boys and 20% are girls
Step-by-step explanation: Take 1200 ÷ 6000 = 0.2 , to find the percentage multipy 0.2 x 100 = 20%, then subtract 20% from 100 giving you 80%. This means 80% of the members are boys.
Mia removes the plug from a trough to drain the water. The volume, in gallons, in the trough after it has been unplugged can be modeled by f(x) = 10x2 −19x + 6, where x is time in minutes. Which of the following equations will reveal the time in minutes when the trough is empty?
Therefore, the time in minutes when the trough is empty is approximately 0.313 minutes.
To find the time in minutes when the trough is empty, we need to solve the equation f(x) = 0, since f(x) represents the volume of water in the trough.
So, we need to solve the quadratic equation:
[tex]10x^2 - 19x + 6 = 0[/tex]
To solve this equation, we can use the quadratic formula:
[tex]x = (-b ± \sqrt(b^2 - 4ac)) / 2a[/tex]
where a = 10, b = -19, and c = 6.
Plugging in these values, we get:
[tex]x = (-(-19) ± \sqrt((-19)^2 - 4(10)(6))) / 2(10)[/tex]
[tex]x = (19 ± sqrt(241)) / 20[/tex]
So, the two solutions are:
[tex]x = (19 + \sqrt(241)) / 20 \approx1.807 minutes[/tex]
[tex]x = (19 - \sqrt(241)) / 20 \approx0.313 minutes[/tex]
However, only the second solution makes sense in this context, since the trough cannot be empty before we start draining the water. Therefore, the time in minutes when the trough is empty is approximately 0.313 minutes.
To know more about quadratic visit:
https://brainly.com/question/22364785
#SPJ1
A biologist is studying the growth of a particular species of algae. She writes the following equation to show the radius of the algae, f(d), in mm, after d days:
f(d) = 7(1.06)d
Part A: When the biologist concluded her study, the radius of the algae was approximately 13.29 mm. What is a reasonable domain to plot the growth function? (4 points)
Part B: What does the y-intercept of the graph of the function f(d) represent? (2 points)
Part C: What is the average rate of change of the function f(d) from d = 4 to d = 11, and what does it represent? (4 points)
Part A: A reasonable domain to plot the growth function would be from d = 0 to d = 11.
Part B: The y-intercept of the graph of the function f(d) is 7
Part C: The average rate of change of the function f(d) from d = 4 to d = 11 is approximately 0.64 mm/day.
Domine and y-intercept of a function:
The domain of a function represents the set of input values for which the function is defined and can produce a meaningful output.
The y-intercept of a function represents the value of the function when the input is equal to zero.
The average rate of change of a function from x = a to x = b is given by the slope of the secant line passing through the points (a, f(a)) and (b, f(b)).
Here we have
A biologist is studying the growth of a particular species of algae. She writes the following equation to show the radius of the algae, f(d), in mm, after d days:
=> f(d) = 7(1.06)^d
Since it is given that the radius of the algae was approximately 13.29 mm when the biologist concluded her study, we can set f(d) = 13.29
=> 13.29 = [tex]7(1.06)^{d}[/tex]
=> ln(13.29/7) = d ln(1.06)
=> d = ln(13.29/7)/ln(1.06) ≈ 11
Therefore, A reasonable domain to plot the growth function would be from d = 0 to d = 11.
Part B: The y-intercept of the graph of the function f(d) represents the value of the function when d = 0.
Substituting d = 0 into the given equation, we get:
f(0) = 7(1.06)⁰ = 7
Therefore, The y-intercept of the graph of the function f(d) is 7
Part C: The average rate of change of the function f(d) from d = 4 to d = 11 is given by the slope of the secant line passing through the points (4, f(4)) and (11, f(11)). Using the given equation, we can evaluate f(4) and f(11):
f(4) = 7(1.06)⁴ ≈ 8.84
f(11) = 7(1.06)¹¹ ≈ 13.29
The slope of the second line passing through these two points is:
Slope = (f(11) - f(4))/(11 - 4) = [ 13.29 - 8.84]/7 = 0.64
Therefore,
The average rate of change of the function f(d) from d = 4 to d = 11 is approximately 0.64 mm/day.
Learn more about Functions at
https://brainly.com/question/24839787
#SPJ1
rylie is a newly hired cybersecurity expert for a government agency. rylie used to work in the private sector. she has discovered that, whereas private sector companies often had confusing hierarchies for data classification, the government's classifications are well known and standardized. as part of her training, she is researching data that requires special authorization beyond normal classification. what is this type of data called? group of answer choices
Compartmentalized is the type of data that is discussed in the problem researched by an employee rylie who is a newly hired cybersecurity expert for a government agency and has working experience in the private sector.
Data classification is the way of organizing data into different categories that make it easy to retrieve, sort and store for future use. In simple words, compartmentalization means to separate into isolated compartments or categories. In data language, A nonhierarchical grouping of information used to control access to data more finely than with hierarchical security classification alone is called Compartmentalization. Now, we have a rylie who is a newly hired cybersecurity expert for a government agency. She has working experience in the private sector. On basis of her experience she has discovered that, the private sector companies often had confusing hierarchies for data classification as compared to the government's classifications which are well known and standardized. During her training, she is researching data that requires special authorization beyond normal classification. The data type that she researched and that is authorization beyond normal classification is called compartmentalized data.
For more information about data classification, visit :
https://brainly.com/question/30580761
#SPJ4
A particular pancake recipe calls for 3 cups of flour to 1 cup of milk. What is the ratio of flour to milk if you double this
Answer: It should be the same?
(edit) Answer: The direct answer is 6:2 or 6 (cups) flour 2 (cups) milk
Step-by-step explanation: I'm Confused, the ratio is 3:1 or 1:0/3 even if you double the ratio it would be 6:2 the portions of flour will always 3 times the amount (measurement) of the milk. Correct me if i'm wrong, a bit perplexed why this question is asked.
Huseyin was able to map quadrilateral EFGH onto EJGK using a vertical stretch
Huseyin used a vertical stretch, so the quadrilateral aren't similar. So correct option is A.
Describe Quadrilateral?A quadrilateral is a geometric shape that consists of four straight sides and four angles. It is a polygon because it is a closed shape with multiple straight sides.
There are various types of quadrilaterals, which are classified based on their properties. Some common types of quadrilaterals include squares, rectangles, rhombuses, parallelograms, trapezoids, and kites.
A square is a quadrilateral with four equal sides and four equal right angles. A rectangle has four right angles but opposite sides are equal. A rhombus has four equal sides, but its angles are not necessarily right angles. A parallelogram has opposite sides that are parallel and equal in length, but its angles are not necessarily right angles. A trapezoid has only one pair of opposite sides that are parallel. A kite has two pairs of adjacent sides that are equal in length.
We know that that two quadrilateral are similar if corresponding angles are congruent and measures of their corresponding sides are proportional.
In the given transformation, angles that corresponding to each other are
∠fEH and ∠JEK
∠EHG and ∠EKG
∠HGF and ∠KGJ
and ∠GFE and ∠GJE
Here all four angles of EFGH are not congruent to other four angles of EJGK.
So,
Here Huseyin used a vertical stretch, so the quadrilateral aren't similar.
To know more about angles visit:
https://brainly.com/question/10462409
#SPJ1
The complete question is:
what is the degree and leading coefficient
Answer: The degree of the polynomial is the highest power of the variable that occurs in the polynomial.
Step-by-step explanation:
y+5=2(x+1) what is the X and Y intercept
Pollyomial Roller coaster project! HELP PLEASE
please show all work, below is an example, rubric, and what's needed in this graph.
please show the graph and Factored form
Thank you
The description of the polyomial roller coaster project is shown below
Solving the polyomial roller coaster projectProposal for the "Imaginary Rush" Roller Coaster:
Coaster name: Imaginary RushFactored form of polynomial: 1/10(x + 1)(x - 2)(x - 4)(x + 5i)(x - 5i)Standard form of the polynomial: f(x) = 1/10[x⁵ - 5x⁴ + 27x³ - 117x² + 50x + 200]The polynomial's graph is attached
Description of how client specifications are met:
The coaster starts on ground level, as the graph of the polynomial crosses the x-axis at x = -1.The coaster goes underground, as the graph dips below the x-axis at x = 4.The coaster includes the imaginary root, as the polynomial has two complex roots at x = 5i and x = -5i.The coaster "grazes" the ground, as the graph of the polynomial touches the x-axis at x = 2.Interpretation of the practicality of the design:
The design of Imaginary Rush is both exciting and practical. The coaster meets all the client's specifications while also providing a thrilling ride for coaster enthusiasts.
The dips and peaks of the coaster follow the behavior of the polynomial, providing a unique experience for riders.
The use of the imaginary root adds an additional level of excitement to the ride, making it stand out from other roller coasters.
Overall, the design of Imaginary Rush is both fun and practical, making it an excellent addition to any theme park.
Discussion of the polynomial's behaviors:
Tail Behavior: As x approaches negative infinity, the value of the function approaches negative infinity. As x approaches positive infinity, the value of the function approaches positive infinity.Relative Maxima/Minima: The polynomial has a relative maximum at x = 2 and a relative minimum at x = 4.Intervals of increasing/decreasing behavior: [tex]\mathrm{as}\:x\to \:-\infty \:,\:f\left(x\right)\to \:-\infty \:[/tex], [tex]\mathrm{as}\:x\to \:+\infty \:,\:f\left(x\right)\to \:+\infty \:,\:\:\mathrm{and\:as}\:x\to \:-\infty \:,\:f\left(x\right)\to \:-\infty \:[/tex]Read more about polynomial at
https://brainly.com/question/7693326
#SPJ1
In triangle ∆ABC, m<A = 33°, m<C = 58°, and AB = 25 in. What is AC to the nearest tenth of an inch?
1. 16.1 in.
2. 38.9 in
3. 42 in.
4. 12 in.
The value of AC to the nearest tenth is 29.5
What is sine rule?The sine rule states that if a, b and c are the lengths of the sides of a triangle, and A, B and C are the angles in the triangle; with A opposite a, etc., then a/sinA=b/sinB=c/sinC.
Angle B = 180-(33+58)
= 180-91 = 89°
using sine rule
represent AC by x
x/ sin89 = 25/sin 58
xsin58 = 25sin89
0.848x = 0.9998×25
0.848x = 24.995
x = 24.995/0.848
x = 29.5( nearest tenth)
therefore the value of AC is 29.5.
learn more about sine rule from
https://brainly.com/question/20839703
#SPJ1
Find the surface area and volume of a prism with height 15ft whose base is a rhombus with sides of length 20ft and one diagonal of 24ft
Answer:
3600
Step-by-step explanation:
So you find the area of a rhombic prism by multiplying the sides together and dividing by 2, so 15*20*24 would be 7200, and that divided by 2 is equivalent to the final answer, which is 3600.
which of the following statements is false? a.) a larger sample size would increase the power of a significance test. b.) the significance level is the probability of making a type i error. c.) expanding the sample size can decrease the power of a hypothesis test. d.) the probability of rejecting the null hypothesis in error is called a type i error.
The statement C is false .
why the statement C is false ?a)A larger sample size would increase the power of a significance test because it provides more information, reduces random error, and increases the precision of the estimate.
b.) The significance level is the probability of making a type I error, which is rejecting the null hypothesis when it is actually true. It is usually denoted by α and is set before conducting a hypothesis test.
c.) Expanding the sample size cannot decrease the power of a hypothesis test. Power is the probability of rejecting the null hypothesis when it is false (i.e., correctly detecting a real effect). A larger sample size generally increases the power of a test, making it more likely to detect a true effect.
d.) The probability of rejecting the null hypothesis in error is called a type I error. It occurs when the null hypothesis is actually true but is rejected based on the sample data. The probability of making a type I error is equal to the significance level (α) of the test.
Learn more about significance test
brainly.com/question/30827627
#SPJ11
A rectangular prism is shown in the image.
A rectangular prism with dimensions of 5 yards by 5 yards by 3 and one half yard.
What is the volume of the prism?
twenty eight and one half yd3
forty one and one fourth yd3
eighty seven and one half yd3
166 yd3
The volume of the prism is 87 and 1/2 cubic yards or 87.5 [tex]yd^{3}[/tex]
What is the volume of the prism?The volume of a rectangular prism is given by the formula V = lwh, where l is the length, w is the width, and h is the height.
In this case, the length is 5 yards, the width is 5 yards, and the height is 3 and 1/2 yards. We can convert the height to a mixed number fraction of 7/2 yards.
Therefore, the volume of the prism is:
V = lwh = 5 yards × 5 yards × 7/2 yards = 87.5 cubic yards
So, the volume of the prism is 87 and 1/2 cubic yards or 87.5 [tex]yd^{3}[/tex]
to know more about volume
brainly.com/question/1578538
#SPJ1
You are conducting a study to see if the accuracy rate for fingerprint identification is significantly less than 0. 16.
With H1 : p < 0. 16 you obtain a test statistic of z=−2. 683.
Use a normal distribution calculator and the tet statistic to find the P-value accurate to 4 decimal places. It may be left-tailed, right-tailed, or 2-tailed.
P-value =
The p-value for the given hypothesis test is 0.0037 (accurate to 4 decimal places)
To find the p-value, we need to use the standard normal distribution table or a calculator. Since the alternative hypothesis is left-tailed, we are interested in finding the area under the curve to the left of the observed test statistic z.
Using a standard normal distribution calculator, we find that the area to the left of z = -2.683 is 0.0037 (rounded to 4 decimal places). This represents the p-value for the hypothesis test.
Therefore, we can conclude that there is strong evidence to reject the null hypothesis at a significance level of 0.05, since the p-value of 0.0037 is less than the chosen significance level. The evidence suggests that the accuracy rate for fingerprint identification is significantly less than 0.16.
Learn more about p-value here
brainly.com/question/30461126
#SPJ4
Any new purchases with a choice for exterior colors A, B, C, and D parentheses and three into your colors one, two, and three make an organized list unlock the first color combinations for the car
the first letter represents the exterior color, and the second number represents the interior color. So "A1" means exterior color A with interior color 1, "B2" means exterior color B with interior color 2, and so on.
A1
A2
A3
B1
B2
B3
C1
C2
C3
D1
D2
D3
Sure, here's an organized list of the first color combinations for the car with exterior colors A, B, C, and D, and interior colors 1, 2, and 3:
To learn more about combinations, visit
https://brainly.com/question/31596715
#SPJ1
For his phone service, Omar pays a monthly fee of $28, and he pays an additional $0.05 per minute of use. The least he has been charged in a month is $97.65. What are the possible numbers of minutes he has used his phone in a month? Use m for the number of minutes, and solve your inequality for m.
Answer: 1393 m
Step-by-step explanation: Because first you are going to subtract the fee (28) and the least charged month (97.65) that is 69.65 and then you are going to divide that number by 0.05 to get the mins that is 1393
A science class is doing an experiment with a model rocket. The rocket shoots straight up in the air, and the students record the time it takes for the rocket to hit the ground. The height of the rocket at time t, in seconds, is given by the equation y = -2(t – 2)2 + 12, where y is in meters.
If the initial height of the rocket is the height of the rocket at time t = 0, what is the initial height of the rocket?
Answer:
To find the initial height of the rocket, we need to determine the height of the rocket when t = 0, since that is the initial time.
Substituting t = 0 into the given equation, we get:
y = -2(0 – 2)2 + 12
y = -2(-2)2 + 12
y = -2(4) + 12
y = 8
Therefore, the initial height of the rocket is 8 meters.
Step-by-step explanation:
I need help with this math, I forgot how to do it over spring break and we're virtual this week im sobbing
Answer:
if they are similiar then a is 4.9
b is 2.8 and c is 4.1
Step-by-step explanation:
if the the shapes are similiar then match up then sides of the shape and they should have equal lengths.
hope this helps :)
A charity needs to report its typical donations received. The following is a list of the donations from one week. A histogram is provided to display the data.
10, 11, 35, 39, 40, 42, 42, 45, 49, 49, 51, 51, 52, 53, 53, 54, 56, 59
A graph titled Donations to Charity in Dollars. The x-axis is labeled 10 to 19, 20 to 29, 30 to 39, 40 to 49, and 50 to 59. The y-axis is labeled Frequency. There is a shaded bar up to 2 above 10 to 19, up to 2 above 30 to 39, up to 6 above 40 to 49, and up to 8 above 50 to 59. There is no shaded bar above 20 to 29.
Which measure of variability should the charity use to accurately represent the data? Explain your answer.
The range of 13 is the most accurate to use, since the data is skewed.
The IQR of 49 is the most accurate to use to show that they need more money.
The range of 49 is the most accurate to use to show that they have plenty of money.
The IQR of 13 is the most accurate to use, since the data is skewed.
The range of 49 is the most appropriate measure of variability to use to represent the spread of donations received by the charity in this data set.
what is statistics?
Statistics is a branch of mathematics that deals with collecting, analyzing, interpreting, presenting, and organizing data. It involves the study of methods for designing experiments and surveys, analyzing and interpreting data, and making decisions based on data. Statistics plays an important role in a wide range of fields, including science, social science, economics, finance, engineering, and many others. It is used to draw conclusions, make predictions, and inform decision-making by providing a quantitative and objective approach to understanding and analyzing data.
The most accurate measure of variability to use for this data set is the range of 49. The range is the difference between the highest and lowest values in the data set, which in this case is 59 - 10 = 49. The range provides a simple and straightforward measure of the spread of the data and is useful when the data is not too skewed.
While the data in this set is skewed, the range is still an appropriate measure of variability because there are no extreme outliers that would significantly affect the range. The IQR (interquartile range) is another measure of variability that is useful for skewed data, but in this case, it would not be the most appropriate choice because the data set is not divided into quartiles and the IQR would not provide additional information beyond what the range already shows.
Therefore, the range of 49 is the most appropriate measure of variability to use to represent the spread of donations received by the charity in this data set.
To learn more about statistics from the given link
https://brainly.com/question/29093686
#SPJ1
The principal of a school claims that 30 % of grade 3 pupils stay in the playground after their classes. A survey among 500 grade 3 pupils revealed that 150 of them stay in the playground after their classes. Use 99% confidence to conduct a test of proportions.
No unrelated answers or links or you will be reported. Thanks
The margin of error for the school's claim is 0.055 or approximately 5.5%.
To find the margin of error, we need to use the formula:
Margin of error = Critical value x Standard error
For a sample size of 500, the critical value can be found by:
critical value = 1.96
Next, we need to find the standard error. The formula for the standard error is:
standard error = sqrt(p_hat * (1 - p_hat) / n)
In this case, the sample proportion is 150/500 = 0.3.
standard error = sqrt(0.3 * (1 - 0.3) / 500) = 0.028
Finally, we can calculate the margin of error:
Margin of error = 1.96 x 0.028 = 0.055
To know more about margin of error, here
brainly.com/question/29101642
#SPJ4
--The complete Question is, What is the margin of error for the school's claim that 30% of grade 3 pupils stay in the playground after their classes, given the results of the survey of 500 grade 3 pupils, which revealed that 150 of them stay in the playground after their classes? Assume a confidence level of 95%.--
If y=3, then -3+y2 =
Answer:
The answer is 6
Step-by-step explanation:
y=3
-3+y²
-3+(3)²
-3+6=6
Find the inverses of the functions and confirm using compositions.
1. The inverse of the function f(x) is ±√((x + 10)/2). 2. The inverse of the function f(x) is y = (x - 5)² + 3.
1. The inverse of the function f(x) is ±√((x + 10)/2). 2. The inverse of the function f(x) is y = (x - 5)² + 3.
What is one on one function?A one-to-one function is one in which every input (x-value) and every output (y-value) have an exact corresponding relationship. Therefore, there aren't any outputs that are repeated. A one-to-one function geometrically passes the horizontal line test if no horizontal line crosses the function graph more than once.
Contrarily, a many-to-one function is one in which different inputs (x-values) result in the same output (y-value). A many-to-one function geometrically fails the horizontal line test if there is a horizontal line that crosses the function's graph more than once.
1. Replace f(x) with y in the given function:
y = 2x² - 10
Now, swap the values of x and y and isolate the value of y:
x = 2y² - 10
x + 10 = 2y²
(x + 10)/2 = y²
y = ±√((x + 10)/2)
The inverse of the function f(x) is ±√((x + 10)/2).
2. Replace f(x) with y in the given function:
y = √(x - 3) + 5
Swap the values of x and y and isolate y:
x = √(y - 3) + 5
x - 5 = √(y - 3)
(x - 5)² = y - 3
y = (x - 5)² + 3
The inverse of the function f(x) is y = (x - 5)² + 3.
Learn more about inverse function here:
https://brainly.com/question/2541698
#SPJ1
the resultant data are: forty mothers have taken the suspected drug during their pregnancies. of these mothers, 35 have delivered malformed infants. in addition, 10 other infants are born with malfunctions. the number of individuals who both did not take the drug and did not give birth to infants who were malformed was:
No. of individuals Suspected drug and didn't give birth to in infants malformed is 10.
Number of individuals who did not take the drug and did not give birth to malformed infants.
subtract the number of individuals who took the drug and gave birth to malformed infants.
The total number of mothers, and then subtract the number of infants born with malfunctions.
Total number of mothers = 40
Number of mothers who gave birth to malformed infants after taking the drug = 35
Number of infants born with malfunctions = 10
the number of mothers who did not take the
drug = 40 - 35 = 5
The number of infants born without malfunctions = Total number of infants - Number of infants born with
malfunctions = (40 - 35) + 5 = 10
For similar questions on Suspected
https://brainly.com/question/30548625
#SPJ11
will give brainliest!!
Answer:
Remember SOHCAHTOA
SOH- Sin= Opposite/Hypotenuse
CAH- Cosine= Adjacent/Hypotenuse
TOA- Tangent= Opposite/Adjacent
sin Θ is 24/25
cos Θ is 7/25
tan Θ is 24/7
Step-by-step explanation:
If using the SOHCAHTOA method all you have to do is memorize your Pythagorean triples
Ex: 3,4,5
7,24,25
5,12,13
identify a characteristic of change managers that an organization should consider when employing people.
Change managers are nonconformists who take risks.
Having a large number of conformist is effective for an organization.
Change managers are usually regarded as peacemakers who follow rules.
Having a large number of radical innovators is effective for an organization.
While hiring change managers, businesses should take into account their nonconformist, risk-taking nature.
To successfully implement organizational change efforts, change managers must question the status quo, take measured risks, and foster creativity. Organizational stability and routine tasks may be maintained more successfully with a large number of conformists, but change managers need a distinct skill set. They must be able to think creatively, try out novel concepts, and deal with ambiguity and uncertainty.
Option 3: Being seen as a rule-following peacemaker may be an asset in some situations, but it is not always necessary for a change manager. Similarly, having a lot of radical innovators (option 4) could backfire if there isn't a balance with other qualities and abilities crucial for effective change management.
Learn more about radical innovation :
https://brainly.com/question/14298323?
#SPJ4
The complete question is:
identify a characteristic of change managers that an organization should consider when employing people.
→ Change managers are nonconformists who take risks.
→ Having a large number of conformist is effective for an organization.
→ Change managers are usually regarded as peacemakers who follow rules.
→ Having a large number of radical innovators is effective for an organization.
While hiring change managers, businesses should take into account their nonconformist, risk-taking nature.
To successfully implement organizational change efforts, change managers must question the status quo, take measured risks, and foster creativity. Organizational stability and routine tasks may be maintained more successfully with a large number of conformists, but change managers need a distinct skill set. They must be able to think creatively, try out novel concepts, and deal with ambiguity and uncertainty.
Option 3: Being seen as a rule-following peacemaker may be an asset in some situations, but it is not always necessary for a change manager. Similarly, having a lot of radical innovators (option 4) could backfire if there isn't a balance with other qualities and abilities crucial for effective change management.
Learn more about radical innovation here:
brainly.com/question/14298323?
#SPJ11
Each letter in the word ORLANDO is written on a card and put into a bag. What is the theoretical probability of choosing an “O”, putting it back and then drawing a “A”.
Hence, The theoretical probability of selecting a "O", returning it to the bag, and then selecting a "A" from the collection is 2/21.
What is the probability?The probability of an occurrence is a number used in mathematics to describe how likely it is that the event will take place. In terms of percentage notation, it is expressed as a number between 0 and 1, or between 0% and 100%. The higher the likelihood, the more likely it is that the event will take place.
What is the event in probability?In probability theory, an event is a set of outcomes of an experiment to which a probability is assigned. A single outcome may be an element of many different events, and different events in an experiment are usually not equally likely, since they may include very different groups of outcomes.
The word "ORLANDO" consists of 7 letters,
in this word "ORLANDO" the O letter is 2 times and A is one times
probability of "O" letters is 2/7 before there are two "O"s in total out of the seven letters because we are putting the first letter back before drawing the second.
After that, there are still 2 "O"s and 1 "A" in the bag for the second draw because we placed the first "O" back. Because there is only one "A" out of a possible three letters, the probability of drawing one on the second draw is one in three.
We multiply the probabilities of each occurrence to determine the probability that both will occur:
P("O" on the first draw)* P("A" on the second draw) = (2/7) * (1/3) = 2/21
The theoretical probability of selecting a "O", returning it to the bag, and then selecting a "A" from the collection is therefore 2/21, or roughly 0.095, or 9.5%.
Learn more about Probability here:
https://brainly.com/question/13604758
#SPJ1.
PLS HELP DUE TODAY LOOK AT SS
Answer:
y = -4.3x + 23.8
Step-by-step explanation:
To find the equation for g(x), we need to first understand what it means for g(x) to be parallel to f(x). Two lines are parallel if they have the same slope, but different y-intercepts. The slope of f(x) is -4 3/10, which can be written as -43/10 in fraction form and -4.3 in decimal form. Therefore, the slope of g(x) is also -4.3.
Now we need to use the fact that g(x) passes through the point (6, -2) to find its y-intercept. We can use the point-slope form of a linear equation to do this: y - y1 = m(x - x1), where m is the slope and (x1, y1) is a point on the line.
Plugging in our values, we get:
y - (-2) = (-4.3)(x - 6)
Simplify the left side
y + 2 = (-4.3)(x - 6)
Next, simplify the right side
y + 2 = -4.3x + 25.8
Subtracting 2 from both sides, we get:
y = -4.3x + 23.8
Therefore, the equation for g(x) is y = -4.3x + 23.8 in simplified slope-intercept form.
Kiran swims z laps in the pool. Clare swims 18 laps, which is 95
times as many laps as Kiran. How many laps did Kiran swim?
Answer:
Therefore, Kiran swam approximately 0.189z laps in the pool.
Step-by-step explanation:
Let's assume the number of laps Kiran swims to be "x".
From the given information, we know that Clare swims 95 times as many laps as Kiran. Therefore, we can write an equation:
18 = 95x
To solve for x, we can isolate it by dividing both sides of the equation by 95:
x = 18/95
x = 0.189