Answer:
Molecule
Explanation:
when two or more than two non-metal elements are combined then it form Molecule.
What is the molarity of a solution containing 9.0 moles of solute in 462 mL of solution
Answer:
[tex]\boxed {\boxed {\sf 19 \ M}}[/tex]
Explanation:
Molarity is a measure of concentration in moles per liter, so the formula is:
[tex]molarity= \frac{moles \ of \ solute}{liters \ of \ solution}}[/tex]
This solution has 9.0 moles of solute and 462 milliliters of solution. We must convert milliliters to liters. Remember that 1 liter contains 1000 milliliters.
Create a ratio.
[tex]\frac{ 1 \ L}{ 1000 \ mL}[/tex]Multiply by the value we are converting: 462 milliliters
[tex]462 \ mL *\frac{ 1 \ L}{ 1000 \ mL}[/tex][tex]462 *\frac{ 1 \ L}{ 1000}[/tex][tex]0.462 \ L[/tex]
Now we know both values and we can solve for the molarity.
moles of solute= 9.0 moles liters of solution = 0.462 L[tex]molarity= \frac{9.0 \ mol}{ 0.462 \ L}[/tex]
Divide.
[tex]molarity= 19.4805195 \ mol/L[/tex]
The original measurements of moles and milliliters have 2 and 3 significant figures respectively. We have to round our answer to the least number of sig figs, which is 2 in this case.
For the number we found, that is the ones place. The 4 in the tenths place (19.4805195) tells us to leave the 9 in the ones place.
[tex]molarity= 19 \ mol/L[/tex]
1 mole per liter is equal to 1 molar or M, so our answer is equal to 19 M.
[tex]molarity \approx 19 \ M[/tex]
The molarity of the solution is approximately 19 M.
ALL THE THINGS YOU SAID ALL THE THINGS YOU SAID RUNING THROUGH MY HEAD RUNNING THROUGH MY HEAD HELPPPP
Answer:
Gamma rays and X-rays
Explanation:
All the things she said
All the things she said
Running through my head
Running through my head
Running through my head
All the things she said
All the things she said
Running through my head
Running through my head
All the things she said
This is not enough
This is not enough
All of the following elements are metals EXCEPT?
A. Br B. Co C. Cu D. Zn
Answer:
Br
Explanation:
90 grams of NaNO3 were added to solution at 10 degrees Celsius. What type of solution was formed?
Answer:
friend me on here and imma send you the link Explanation:
what is the best definition of energy?
A. The capacity to measure heat.
B. The capacity to measure mass
C. The capacity to exert strength
D. The capacity to do work
Answer:
D. the capacity to do work
Explanation:
the basic definition of energy is the ability to do work
What element is produced when Mercury - 204 undergoes alpha decay?
Answer:
bismuth
Explanation:
i think if not i am so sorry
a gas with a volume of 20.0l at a pressure of 275 kpa is allowed to expand to a volume of 35.0l. what is the pressure in the container if the temperature remains constant?
1. 2.54 kPa
2. 157 kPa
3. 481 kPa
pls help ;(
Answer:
[tex]\boxed {\boxed {\sf 2. \ 157 \ kPa}}[/tex]
Explanation:
Since temperature remains constant, the only variables that change are volume and pressure. Therefore, we are using Boyle's Law. This states that the pressure is inversely proportional to the volume. The formula is:
[tex]P_1V_1=P_2V_2[/tex]
We know the gas starts with a volume of 20.0 liters at a pressure of 275 kPa. We can substitute these values into the left side of the formula.
[tex]275 \ kPa *20.0 \ L=P_2V_2[/tex]
We know the gas expands to a volume of 35.0 Liters, but we do not know the pressure.
[tex]275 \ kPa *20.0 \ L=P_2* 35.0 \ L[/tex]
Since we are solving for the new pressure, we must isolate the variable P₂. It is being multiplied by 35.0 Liters and the inverse of multiplication is division. Divide both sides by 35.0 L.
[tex]\frac {275 \ kPa * 20.0 \ L}{ 35.0 \ L}= \frac{P_2*35.0 \ L}{35.0 \ L}[/tex]
[tex]\frac {275 \ kPa * 20.0 \ L}{ 35.0 \ L}=P_2[/tex]
The units of liters cancel.
[tex]\frac {275 \ kPa * 20.0 }{ 35.0 }=P_2[/tex]
[tex]\frac {5500}{35.0} \ kPa= P_2[/tex]
[tex]157.142857 \ kPa=P_2[/tex]
The original measurements of pressure and volume have 3 significant figures, so our answer must have the same. For the number we calculated, that is the ones place.
The 1 in the tenths place (157.142857) tells us to leave the 7 in the ones place.
[tex]157 \ kPa= P_2[/tex]
If the gas expanded to a volume of 35.0 liters while the temperature remained constant, the pressure in container was approximately 157 kilopascals.
How GM food are produced?
What is genetic modification (GM) of crops and how is it done? GM is a technology that involves inserting DNA into the genome of an organism. To produce a GM plant, new DNA is transferred into plant cells. Usually, the cells are then grown in tissue culture where they develop into plants.
Answer:
GM is a technology that involves inserting DNA into the genome of an organism. To produce a GM plant, new DNA is transferred into plant cells. Usually, the cells are then grown in tissue culture where they develop into plants. The seeds produced by these plants will inherit the new DNA.
Lee and some other students working with Dr. Yung were conducting an experiment and ended up with some confusing results. In the experiment, each student combined sodium and hydrogen chloride, but, as shown in the table below, each student ended up with different results. Lee is trying to determine what happened.
In a few minutes, you will see a video of what happened when Lee combined two substances. Before you watch the video, see if you can predict why each student ended up with different results.
Student's name Starting substances Ending substances
Lee sodium and hydrogen chloride hydrogen and sodium chloride
Vera sodium and hydrogen chloride hydrogen, sodium chloride, and sodium
Domingo sodium and hydrogen chloride hydrogen, sodium chloride, and hydrogen chloride
Why do you think Vera and Domingo ended up with three substances after the chemical reaction while Lee only ended up with two?
Answer:
chung long
Explanation:
cause 3 plus 2 =9
How many grams of water are produced when 12.50 mol oxygen reacts with hydrogen?
Answer: According to reaction below, when one mol of oxygen reacts with two mol of hydrogen, two mol of water is produced. Thus, when 2.5 mol of oxygen reacted with hydrogen, 2 * 2.5 mol = 5 mol of water is produced. The molar mass of water is 18 g/mol.
Explanation:
Not My WORK! I got this info from another site. BUT I HOPE IT HELPS :)
The movement of water from an area of high concentration to one of low concentration through a semipermeable membrane is called ?
8.
(a) Tick (™) the box next to the correct statement about the mixture.
mixture of four elements
mixture of four compounds
mixture of two elements and two compounds
mixture of one element and three compounds
Answer:
mixture of four compounds
mixture of two elements and two compounds
Explanation:
it can be one of thosecan u tell me if its correct pls I'm studying this too1. Hay un gas con 700 milímetros de Mercurio de presión en 922 ml de volumen a 20 grados Celsius. Calcula la temperatura final a 500 mm de mercurio con 451 ml.
2. un gas ocupa un gas ocupa 205 mililitros a 20 grados centígrados y 1,05 atm. Calcule el volumen final a 60 grados centígrados y 2,4 Atmósferas de presión.
3. tenemos 22 L de un gas a una temperatura de 220 K y una presión de 5 Atm, si se modifican la presión a 6.5 atm y la temperatura a 200 K, cuál será el volumen que obtenemos.
Answer:
püvinlbxyfsswgrxzvnnchcyv nkivtcdg
Study the particle below carefully and answer
the questions that followed.
a)ldentify the particle.
b)Write the electronic configuration of the
particle.
c)State
i.Atomic number
ii.Mass number
iii.Proton number
iv.Electron number
d) Calculate the neutron number
e) State the valency
f)What is the valence electrons?
Answer:
b is the answer hope that helps
Which equation correctly represents the dissociation of a strong acid in water?
Question 26 options:
CH3COOH ↔H++ CH3COO−
NaOH →Na++OH−
HCl →H+ +Cl−
NH3+ H2O↔ NH4++ OH−
The equation that correctly represents the dissociation of a strong acid in water is as follows: HCl → H+ + Cl−
What is acid dissociation?Acid dissociation is the process by which an acid breaks up into it's constituent ions in an aqueous solution.
Acids are known to contain hydrogen ions (H+), hence, dissociate into H+ and an anion.
A strong acid like HCl dissociates completely in an aqueous solution while a weak acid does not dissociate completely.
According to this question, hydrogen chloride (HCl) is said to dissociate into hydrogen ion (H+) and chloride (Cl-) according to the following expression:
HCl → H+ + Cl−
Learn more about acid dissociation at: https://brainly.com/question/4363472
#SPJ1
Which of the following is a correct statement about water? (3 points)
Hydrogen bonding causes water to be strongly cohesive.
Hydrogen bonding causes water to have a low surface tension.
Water is a universal solvent because polar and nonpolar solutes can dissolve in it.
Water is less dense as a liquid than as a solid because of changes in bond structure.
Answer:
A: Hydrogen bonding causes water to be strongly cohesive.
Explanation:
Water has a high surafce tension. Hence droplets of water
Water cannot dissolve non polar substances like oil; only polar
Water is actually less dense in solid form :)
Hydrogen bonding causes water to be strongly cohesive.
This sticking together of like substances is called cohesion. Depending on how attracted molecules of the same substance are to one another, the substance will be more or less cohesive. Hydrogen bonds cause water to be exceptionally attracted to each other. Therefore, water is very cohesive.
Cohesion
Cohesion, also called cohesive attraction or cohesive force, is the action or property of like molecules sticking together, being mutually attractive. It is an intrinsic property of a substance that is caused by the shape and structure of its molecules, which makes the distribution of surrounding electrons irregular when molecules get close to one another, creating an electrical attraction that can maintain a microscopic structure such as a water drop. In other words, cohesion allows for surface tension, creating a "solid-like" state upon which light-weight or low-density materials can be placed.
Learn more about Cohesion
https://brainly.com/question/18176896
#SPJ2
Which layer of the earth is the thinnest and thickest?
Answer:
crust
Discuss with the whole class what the relative thicknesses of the layers are — that the inner core and outer core together form the thickest layer of the Earth and that the crust is by far the thinnest layer.
Explanation:
Discuss with the whole class what the relative thicknesses of the layers are — that the inner core and outer core together form the thickest layer of the Earth and that the crust is by far the thinnest layer.
2. How did the Activator affect the mixture?
Answer:
Activator effects a mixture if you put to much of the activator your using into a product or thing you are using.
Explanation:
For ex.
If you poor to much activator into slime it will make the slime hard and very wet it will ruin your slime completely so you will have to do it just right but start off pouring it slowly and mix and then more if it needs more.
If a sample of a gas occupies 5.22 L at 235 oC, what will its volume be at 75 oC if the pressure remains the same?
Answer:
1618.2
Explanation:
235+75=310×75=1618.2
Balance this chemical equation
Ca(OH)2 + HCl ---> CaCl2 + H2O
Answer:
The balance equation of Ca(OH)2 + HCl ---> CaCl2 + H2O
is
Ca(OH)2(s) + 2HCl(aq) ---> CaCl2(aq) +2H2O (l) (balanced equation)
Explain the method to decrease friction?
Answer:
having a smooth or lubricated surface may help decrease friction.
Explanation:
To determine the molar mass of an element, one must know the element's
a. number of isotopes.
b average atomic mass
c avogradro constant
d atomic number
Answer:
d
Explanation:
from you know the atomic number it should be easy to find
To determine the molar mass of an element, one must know the element's atomic number. Therefore, option D is correct.
What is the atomic number ?An element's atomic number (Z) is the number of protons in the nucleus of each atom of that element. This means that the number of protons is the feature that distinguishes each element from all others. Elements differ based on their atomic number.
Because the combined masses of protons and neutrons account for nearly all the mass of a given atom, the atomic mass of a single atom can be calculated by adding the total number of protons and neutrons of that particular isotope.
The atomic mass of any element on the periodic table can be used to calculate its molar mass.
Thus, option D is correct.
To learn more about an atomic number, follow the link;
https://brainly.com/question/16858932
#SPJ6
Sodium chloride is produced from its elements through a synthesis reaction. What mass of each reactant would be required to produce 22.0 mol of sodium chloride? sodium
Answer:
506.0 g sodium and 778.8 g chlorine gas
Explanation:
The elements from which sodium chloride (NaCl) is composed are sodium (Na) and chlorine (Cl). Thus, the chemical equation for the production of sodium chloride (NaCl) from sodium (Na) and chlorine gas (Cl₂) is the following:
2Na(s) + Cl₂(g) → 2NaCl(s)
According to the balanced equation, 2 moles of NaCl are produced from 2 moles of Na(s) and 1 mol of Cl₂. To produce 22.0 mol of NaCl, we need:
22.0 mol NaCl x 2 mol Na(s)/2 mol NaCl = 22.0 mol Na(s)
22.0 mol NaCl x 1 mol Cl₂/2 mol NaCl = 11.0 mol Cl₂
Now, we convert the moles of each reactant to grams with the molar mass (MM) of the compound:
MM(Na) = 23 g/mol
22.0 mol Na x 23 g/mol = 506.0 g Na(s)
MM(Cl₂) = 35.4 g/mol x 2 = 70.8 g/mol
11.0 mol Cl₂ x 70.8 g/mol = 778.8 g Cl₂
Therefore, it is required a mass of 506.0 grams of Na(s) and a mass of 778.8 grams of Cl₂ to produce 22.0 mol of NaCl.
Which of the following pH numbers are acidic? (Choose 2)
9
11
7
5
3
the pH numbers that are acidic above is 3 and 5
please mark all that apply!
Answer:
F G there you go the guy on top is right
Explanation:
F G
Does the excess reactant get used up completely in a reaction??
Answer:
In a chemical reaction, reactants that are not used up when the reaction is finished are called excess reagents. The reagent that is completely used up or reacted is called the limiting reagent, because its quantity limits the amount of products formed.
Explanation:
2Cr^3 + 3Zn(s) -> 2Cr(s) + 3Zn^2 + (aq) which reactant is reduced and which is oxidicided
Answer:
Cr is oxidised
and
Zn is reduced
[ Reduced reactant ] :
Cr^( + 3 ) + 3 e^( - 1 ) ===》 Cr^( 0 )
_____________________________
[ Oxidicided reactant ] :
Zn^(0) ===》Zn^( + 2 ) + 2 e^( - 1 )
How many Fluorine atoms are needed to accept the electrons of one Ca atom?
1
2
3
4
2 F atoms
Explanation:
A Ca atom has a valence number of +2, which means that when ionized, it will give up two electrons. In turn, a F atom has a valence number of -1, which means it can only accept 1 electron when ionized. So to accommodate the two electrons from Ca atom, we need 2 F atoms.
HELP PLEASE
1. Locations where volcanoes form far from plate boundaries are called
A. islands
B. hot spots
C. divergent zones
What does an increase in temperature do to the reaction rate?
Answer:
An increase in temperature typically increases the rate of reaction because an increase in temperature will raise the average kinetic energy of the reactant molecules. Therefore, a greater proportion of molecules will have the minimum energy necessary for an effective collision.Increasing the temperature increases reaction rates because of the disproportionately large increase in the number of high energy collisions. It is only these collisions (possessing at least the activation energy for the reaction) which result in a reaction.
Explanation:
Can you please give this answer a brainliest answer please