Answer:
False
Explanation:
To find how many liters 251mL is you would need to divide 251 by 100 which is 0.251.
what is the magnitude of the torque that the axle must apply to prevent the disk from rotating?
The required torque at the axle, is given by the difference between the
moments of the applied forces.
The torque required is 19.62 N·m counterclockwise
Reasons:
The given parameters are;
Mass of the disk, m = 5.0 kg
Location of the axle = Half the radius of the disk
Diameter of the disk, D = 40 cm = 0.4 m
Applied mass, 0.1 m from the axle = 15 kg
Applied mass, 0.3 m from the axle = 10 kg
Required:
Magnitude of torque at the axle that prevent the disk from rotating
Solution:
Torque needed = Clockwise moment - Counterclockwise moment
Clockwise moment = (10 kg × 0.3 m + 5 kg × 0.1 m) × 9.81 m/s² = 34.335 N·m
Counterclockwise moment = 15 kg × 0.1 m × 9.81 m/s² = 14.715 N·m
τ + Counterclockwise moment = Clockwise moment
τ + 14.715 N·m = 34.335 N·m
Torque required, τ = 34.335 N·m - 14.715 N·m = 19.62 N·m
Torque required, τ = 19.62 N·m counterclockwise
Learn more here:
https://brainly.com/question/19044661
https://brainly.com/question/19247046
The probable question drawing obtained from a similar question online is attached
Select two of Earth's spheres and explain how they interact with each other.
atmosphere, biosphere, cryosphere, geosphere and hydrosphere
HELPPPPPPPP!!!!!
Answer and Explanation: The geosphere interacts with the cryosphere when glaciers and sheets of ice from the cryosphere erode the rocks located on the geosphere. This happens as ice passes over the land and carries eroded rocks to new locations. The cryosphere can also cause soil to become icy and take hold of greenhouse gases from the atmosphere. The geosphere is the part of the Earth that has rocks, minerals, sand, and lava. The cryosphere has frozen water, ice, and glaciers. The cryosphere also interacts frequently with the hydrosphere because it draws water from the hydrosphere and freezes it during cold temperatures. Warmer temperatures cause the cryosphere to melt and release water back to the hydrosphere.
plzz explain how it is 66 m
i know that distance =speed × time so how it is 66 m not a
0.4 and if there us another rule plz explain like if u day that 1/2 ×speed ×time plz explain why u used 1/2 or when do I use the 1/2 rule
Hi there!
For someone to hear an echo, the sound must echo and bounce back to the person.
Thus, the sound travels TWICE the distance from the person to the wall (to the wall and back).
We know that:
d = st (distance = speed × time)
Let L = distance from person to wall
Thus:
2L = st
2L = 330 × 0.40
2L = 132
L = 66 m
A ____ is believed to occur when energy, stored in a twist in the solar magnetic field above a sunspot, is suddenly released.
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
A solar flare is believed to occur when energy, stored in a twist in the solar magnetic field above a sunspot, is suddenly released.
10. Which of the following will happen to the respiratory-associated muscles if you were to blow up a balloon?
A. Diaphragm contracts, Internal intercostal would relax
B. Diaphragm would contract, external intercostal would relax
C. Internal intercostal and abdominal muscles would contract
D. External intercostal would contract and diaphragm would relax
Answer:
C
for sure
go for it
..............
the temperature of a room is 77°F what would be the temperature in Celsius scale
Formulas change from F to degree C : C = ( F - 32 )/1.8
so we have (77-32)/1.8 = 25 oC
ok done. Thank to me :>
Answer: The answer is C. 298 K
Explanation:
calculate the relative density of a block having dimension 4m x 3m x 2m given its mass in 48000g
Answer:
in the picture
Explanation:
CARRY ON LEARNING
A ball of mass 2.0 kg is travelling at a speed of 12 m/s. It moves towards an object of mass 3.0 kg which is at rest.
The ball hits the object and sticks to it.
Which row gives the total momentum, and the speed of both objects immediately after the collision?
total momentum (kg m/s)
A- 0
B- 0
С- 24
D- 24
AND..
speed (m/s)
A- 4.8
B- 8.0
C- 4.8
D- 8.0
Please find attached photograph for your answer.
Hope it helps.
Do comment if you have any query.
The velocity for the entire trip is 0.4 m/s as It takes her 500 seconds to make the round trip and 60 kg • m/s2 = (45 kg • v) + (20 kg • 3 m/s).
Path 1 = 400 m В B. A Path 2 = 200 m Path 3 = 300 m. Thus, option C is correct.
What is velocity?A particle's settling velocity known as the rate at which is travels through a still fluid. The specific gravity of the particles, their size, and their shape all have an impact on settling velocity.
A particle in still air will gravitationally settle and reach its terminal velocity fairly quickly. A particle's terminal velocity in a still fluid is referred to as the settling velocity (also known as the "sedimentation velocity").
Understanding variations in the hydraulic regime and interactions between sediment and fluid in the surf zone depends heavily on the particle settling velocity at the foreshore region. In contrast to sedimentation, which is the end product of the settling process, settling is the movement of suspended particles through the liquid.
Therefore, Thus, option C is correct.
Learn more about velocity on:
https://brainly.com/question/19979064
#SPJ2
v=VyV67.2 -8.2 m/s
Part B
Now let's see if your prediction agrees with the experimental results. There isn't any data at y=-3.5 m, so you'll need to interpolate by zooming in
on the relationship between y velocity (W) and y displacement. You'll use Tracker's Data tool to help with this analysis. Follow these steps:
• Change the vy versus t graph to a vy versus y graph. (Click the t label on the horizontal axis and select y. position y-component from the
menu.)
• It's a little hard to see what's going on with this graph at y = -3.5, so zoom in. Double-click on the graph to open it up in the Data tool.
. Put your cursor on the point where the graph line intersects y = -3.5. Click and hold to read the vy at that point shown in a yellow box in the
bottom left comer).
What's the interpolated graph value of v, at y = -3.57 Comment on how well this value agrees with the value of v, that you calculated in part A of
this activity. Make a hypothesis about any notable difference.
Answer:
-3.5
Explanation:
b/c the distance is moving in to two A And B A +B or S1 +S2 that is it
Answer:
The interpolated velocity value from the graph is -8.1 meters/second. The calculated value based on the average acceleration is -8.2 meters/second. This is very good agreement.
Explanation:
Which is required for
conduction?
A.moving fluids
B. Two substances in direct
contact with one another
C. Two substances in close proximity, but not necessarily touching
Answer:
You need (B) Two substances in direct contact with one another to have conduction.
I hope this helped at all.
4. A force of 50 Newtons is applied to a mass resulting in an acceleration of 8 m/s2. What force would need to be applied to this mass to cause an acceleration of 25 m/s??
Answer:
125N
Explanation:
force =mass×acceleration
50 =mass×8m/s2
mass=6.25kg
an empty bottle weight 22.4 g when empty,406g when filled with water and 52.8g when filled with liquid x
Answer:
question is incomplete
part 2 of 2
With what speed does the stone strike the
water?
Answer in units of m/s.
Hi there!
We can begin by finding the final VERTICAL velocity of the ball.
Use the following kinematic equation: vf² = vi² + 2ad
The ball does not have any initial velocity in the vertical direction so:
vf² = 2ad
Plug in given values:
vf² = 2(9.81)(44) = 29.38 m/s
Find the TOTAL speed using the pythagorean theorem (involving both the horizontal velocity which remains the same and vertical velocity)
v = √(21²) + (29.38²) = 36.115 m/s
The table shows the diameters of the planets in our solar system. Assume that a basketball whose diameter is 25
centimeters represents the planet Jupiter. Find the scale (ratio) between Jupiter and the basketball. Then use this ratio to
find the scaled diameter of the other planets. Enter these numbers into the table. (Saturn has been done for you.) Finally,
choose a real-world spherical or nearly spherical object that matches the scaled diameter of each planet.
Saturn is shown as an example. To find what Saturn's size would be after adjusting it to scale, follow these steps. Let the
scaled diameter of Saturn be d centimeters. If Jupiter's diameter, 142,984 kilometers, is scaled to 25 centimeters, Saturn's
diameter of 120,536 kilometers will be scaled to about 21 centimeters:
120,536
d
120,536x25
142,984
d ~ 21 cm
Use this process to complete the table.
142,984
25
Answer:
Mercury:
.85
pea
Venus:
2.1
gumball
Earth:
2.2
gumball
Mars:
1.2
marble
Uranus:
9
grapefruit
Neptune:
8.6
softball
Explanation:
I have no clue if I'm right but hopefully, I am
How do you change an object's motion?
6. Explain a change that you can make in your diet to further your overall health.
Answer:
“Eat more delicious whole-food plants at every meal and snack. Fruits, vegetables, whole grains, nuts and seeds are packed with nutrients and contain satisfying fiber that is good for digestion, disease prevention and sustained energy.
Explanation:
More potential energy can be stored by moving against the magnetic force closer to a magnet?
Answer:
if your saying can it? then yes or if you are asking what type of magnetic force then its fr its actual self magnetic force
Explanation:
helpppp i am not smart
Answer:
it might be b maybe
Explanation:
Please help thank you!
Answer:
mass, weight
Explanation:
mass is constant, and weight is dependant on your location
Answer:
I think d
Explanation:
because distance j
has to be the last one that's the only one with distance
Sachi wants to throw a water balloon to knock over a target and win a prize. The target will only fall over if it is hit with a force of 0. 035 N. The water balloon has a mass of 11. 4 grams. How fast will Sachi have to make the water balloon accelerate to hit the target with enough force and win the prize? Round the answer to the nearest one tenth m/s2. The water balloon must accelerate m/s2.
Hi there!
We can use the following equation (Newton's Second Law):
∑F = ma
m = mass of object (kg)
a = acceleration (m/s²)
We can rearrange to solve for 'a':
F/m = a
Remember to convert grams to kg.
1000g = 1 kg
0.035/(0.0114) = 3.07 m/s²
how does the hypothesis of inflation account for the existence of the seed of density from which galaxies and other large structures formed
11. A box with a mass of 1.0 kg is resting on a horizontal surface and the coefficient of friction between the block and the surface is 0.20. It is accelerated by attaching a 1.5 kg mass, as shown in the diagram. Assume that the pulley is frictionless and that the cord has negligible mass.
a. What is the acceleration of the box? What is the tension?
Answer:
We know that the force pulling the box in the positive x direction has a magnitude of m g sin 30 . Using Newtons Second Law, F = ma , we just need to solve for a :
ma=mgsin30
a=gsin30
=(10m/s2)(0.500)
=5m/s2
Answer:
A force is applied acting to the right. Assume that friction is negligible. Ikg 0.5N. For each question, one or more features of the system.
Explanation:hope this helps
the graph below shows the densitys of rock
Explanation:
The terms heavy and light are commonly used in two different ways. We refer to weight when we say that an adult is heavier than a child. On the other hand, something else is alluded to when we say that rock is heavier than soil. A small rock would obviously weigh less than a roomful of soil, but rock is heavier in the sense that a rock of given size weighs more than the same-size sample of soil. What we are actually comparing is the mass per unit volume, that is, the density. In order to determine these densities, we might weigh a cubic centimeter of each sample. If the rock sample weighed 2.71 g and the soil 1.20 g, we could describe the density of the rock as 2.71 g cm–3 and that of the soil as 1.20 g cm–3. Even though sand is made of rock fragments, its density is less because the porosity of sand lowers its bulk density (as shown below). (Note that the negative exponent in the units cubic centimeters indicates a reciprocal. Thus 1 cm–3 = 1/cm3 and the units for our densities could be written as g/cm3, or g cm–3. In each case the units are read as grams per cubic centimeter, the per indicating division.) We often abbreviate "cm3" as "cc", and 1 cm3 = 1 mL exactly, by definition.
Table 1 : Density of Soils and Rocks
sand
1.52
sandy loam
1.44
loam
1.36
silt loam
1.28
clay loam
1.28
clay
1.20
amphibolite
2.79–3.14
dolomite
2.72–2.84
gneiss
2.59–2.84
limestone
1.55–2.75
marble
2.67–2.75
schist
2.73–3.19
shale
2.06–2.67
slate
2.72–2.84
pyrite
5.0
gold
a trip from Austin to Dallas takes about 3 hours going 65 mi/hr north is this speed, velocity, or acceleration?
Answer:volocity
Explanation:
Un automóvil aumenta su rapidez cuando está en una pista circular. ¿Tieneaceleración centrípeta? ¿Tiene aceleración angular? Explique.
Explanation:
espero que re ayude esta información para tu pregunta
OK I have tried answering this for a while but im not very good at this so, how many waves will pass in 1 second if it has a frequency of 10 Hz?
2. A bowling ball is dropped off a 300 meter high bridge. A water bottle is dropped from
the same position 3 seconds later. How high above the ground is the water bottle, when the
bowling ball has a speed of 64 m/s? *
(2 Points)
A bowling ball is dropped off a 300 meter high bridge. A water bottle is dropped from the same position 3 seconds later. the ground is the water bottle, when the bowling ball has a speed of 64 m/s is zero.
what is speed ?Speed is measured as the ratio of distance to the time in which the distance was covered. Speed is a scalar quantity as it has only direction and no magnitude.
The formula of speed is represented as s=d/t, Where, s is the speed in m.s-1, d is the distance traveled in m, t is the time taken in s
There are four types of speed such as Uniform speed, Variable speed, Average speed, Instantaneous speed
Uniform speed is an uniform speed when the object covers equal distance at equal time intervals, variable speed is defined as when the object covers a different distance at equal intervals of times.
Average speed is defined as the uniform speed the ratio of total distance travelled by an object to the total time taken by the object.
Instantaneous speed is defined as an object is moving with variable speed, then the speed at any instant of time is known as instantaneous speed.
For more details regarding speed, visit
brainly.com/question/13263542
#SPJ2
about how much more energy is released in a 6.5 richter magnitude earthquake than in one with magnitude 5.5?
Answer:
For example, an earthquake of magnitude 5.5 releases about 32 times as much energy as an earthquake measuring 4.5. Another way to look at this is that it takes about 900 magnitude 4.5 earthquakes to equal the energy released in a single 6.5 earthquake.
Explanation:
A 4.6 kg bucket of water is raised from a well by a rope. The acceleration of gravity is 9.8 m/s 2 . If the upward acceleration of the bucket is 3 m/s 2 , find the force exerted by the rope on the bucket. Use g
Hi there!
If we sum the forces acting on the bucket:
∑F = T (upward) - Mg (downward)
Thus:
ma = T - mg
We can rearrange for T:
ma + mg = T
Plug in the given values:
4.6(3 + 9.8) = T = 58.88 N
Plzzzz help mee plzzzz help meeee
Answer:
1 $1260.00-$700.00=$560.00
2 $700.00/$1260.00*100= approximately 55.6%
Explanation:
* this sign means Multiplication