3. Which of the following molecules would want except to have a nonpolar covalent bond

Answer:

CHO

Explanation:

Carbon = 41%,  Hydrogen = 4.58%, oxygen = 54.6%

Step 1:

Divide through by their respective relative atomic masses

41/ 12,         4.58/1,         54.6/16

3.41              4.58            3.41

Step 2:

Divide by the lowest ratio:

3.41/3.41,      4.58/3.41,     3.41/3.41

1,                    1,                  1

Hence the empirical formula is CHO

Answer:

The empirical formula of X is C3H4O3.

Explanation:

Complete Question

You are given a solution containing a pair of enantiomers (A and B). Careful measurements show that the solution contains 98% A and 2% B. What is the enantiomeric excess?

Answer:

The value is  [tex]k  = 96 %[/tex]

Explanation:

From the question we are told that

   The  percentage of  enantiomer A is  A =  98%

    The  percentage of  enantiomer B is  B =  2%

Generally the enantiomeric excess is mathematically represented as

      [tex]k  =  \frac{A -B}{A+B}  *  100[/tex]

=>   [tex]k  =  \frac{98 -2}{98+2}  *  100[/tex]

=>   [tex]k  = 96 %[/tex]

Answer:

D

Explanation:

Identifying unique features of evidence

A laboratory is a place where scientific investigations and experiments are conducted. Observing a phenomenon in the lab includes identifying unique features of evidence. Thus, option D is correct.

An observation is said to be the deduction that is seen or heard and is due to the actions of the process or event that are gained from the information from a conducted experiment.

It is an important factor in an experiment and research and is used in the lab to falsify or prove the hypothesis. It is made based on the experimental setup and involves various steps.

The observations are used to draw conclusions and inferences based on the detailed identification of the characteristics of the evidence. The evidence supports the observation.

Therefore, option D. the features of evidence are the correct option.

Learn more about observations here:

https://brainly.com/question/28041973

#SPJ2

Answer:

2.35 x 10²⁰ atoms Ga

Explanation:

After converting from mg to g, use the molar mass as the unit converter to convert to moles. Then using Avogadro's number, 6.022 x 10²³ convert from moles to atoms of Ga.

[tex]27.2mgGa*\frac{1g}{1000mg} *\frac{1 mol Ga}{69.72gGa} *\frac{6.022*10^2^3 atoms Ga}{1 molGa} = 2.349 * 10^2^0 atoms Ga[/tex]

Then round to 3 significant figures = 2.35 x 10²⁰ atoms Ga.

The number of atoms in 27.2 mg sample of Ga is 2.35 × 10²⁰ atoms

From the question, we are to calculate the number of atoms in a 27.2 mg sample of Ga.

First, we will determine the number of moles of Ga present

Using the formula,

[tex]Number\ of\ moles = \frac{Mass}{Molar\ mass} [/tex]

Mass = 27.2 mg = 0.0272 g

Molar mass = 69.72 g/mol

Then,

[tex]Number\ of\ moles \ of\ Ga = \frac{0.0272}{69.72} [/tex]

[tex]Number\ of\ moles \ of\ Ga = [/tex] 0.000390132 moles

Now, for the number of atoms present

From the formula

Number of atoms = Number of moles × Avogadro's constant

Then,

Number of Ga atoms = 0.000390132 × 6.022×10²³

Number of Ga atoms = 2.35 × 10²⁰ atoms

Hence, the number of atoms in 27.2 mg sample of Ga is 2.35 × 10²⁰ atoms

Learn more on stoichiometry here: https://brainly.com/question/14464650

Answer:

4.22mL

Explanation:

V=m/d

v= 18.45g/4.37g/mL

Answer:

5Ns

momentum= mass *velocity

=1*5

=5Ns

Answer:

[H+] = 7.576x10⁻⁴M

pH = 3.12

Explanation:

Based on the equilibrium of the nicotinic acid in water:

HC6H4NO2(aq) + H2O(l) ⇄ C6H4NO2-(aq) + H3O+(aq)

Ka = [C6H4NO2-] [H3O+] / [HC6H4NO2]

As both C6H4NO2-(aq) and H3O+(aq) comes from the same equilibrium, we can approximate their concentration as X and replace:

Ka = [C6H4NO2-] [H3O+] / [HC6H4NO2]

1.4x10⁻⁵ = [X] [X] / [0.041M]

5.47x10⁻⁷ = X²

And as pH is defined as -log [H⁺]

Answer:

I think it's A and D

Explanation:

I'm not sure if it's right

Answer:

The answer is B and D

Explanation:

trust fr

Calcium (Ca) is in group 2 and period 4 on the periodic table be because Calcium has 2 valence electrons and 4 electron shell. Thus, calcium is a metal like all other group 2 element.

The correct answer to the question is Option C. Calcium, like all group 2 elements, is reactive and a solid at room temperature.

Calcium is a group 2 element majorly because it has 2 valence electrons. It is also in period 4 because it has 4 electron shells.

Being a group 2 element, calcium is a solid at room temperature and also reactive. All elements in the group 2 are metals.

There are other elements in period 4 which are not solid. For example krypton is an element in period 4 and it is a gas and not reactive.

From the above information, we can conclude that the correct answer to the question is:

Option C. Calcium, like all group 2 elements, is reactive and a solid at room temperature.

See attached image

Learn more: https://brainly.com/question/5979466

Answer:

Explanation:

The new volume can be found by using the formula for Boyle's law which is

[tex]P_1V_1 = P_2V_2[/tex]

where

P1 is the initial pressure

P2 is the final pressure

V1 is the initial volume

V2 is the final volume

Since we are finding the new volume

[tex]V_2 = \frac{P_1V_1}{P_2} \\[/tex]

We have

[tex]V_2 = \frac{300 \times 2}{7} = \frac{600}{7} \\ = 85.714285...[/tex]

We have the final answer as

Hope this helps you

Answer:

ARSENIC

Explanation:

It has an atomic number of 33

Answer:

Exothermic

Explanation:

Nuclear fission means splitting, so there is a lot of energy being released.

Answer:

it is Calcium (Ca)

4th period, 2nd group, 2 valence electrons

Answer:

C.

Explanation:

You can use the series of elimination for this. First, you look at A. Technology is not an understanding of something new, so we cross that out. Second, you look at B. Technology isn't a series of steps, so we can mark that one off. Third, you look at C. Technology is something created using science for use by society, so we can keep that in mind. Lastly, we check D. Technology doesn't match up to the definition, so we can cross that one out. The answer that would make the most sense would be D.

Answer:

the second answer its science behind it

Answer:

b

Explanation:

Answer:

Explanation:

NaNO₃  = Na⁺  + NO₃⁻¹

.497 M                 .497 M

moles of NO₃⁻¹ = .897 x .497 = .4458 moles

Ca( NO₃)₂  = Ca + 2 NO₃⁻¹

.341 M                    2 x .341 M = .682 M

moles of NO₃⁻¹ = .813 x .682 = .5544 moles

Total moles =  .4458 moles  +  .5544 moles

= 1.0002 moles

volume of solution = 897 + 813 = 1710 mL

= 1.710 L

concentration of nitrate ion = 1.0002 / 1.710 M

= .585 M

Answer:

1.14 M

Explanation:

Let's consider the following reaction.

butane ⇄ isobutane

We can use the concentrations at equilibrium to calculate the equilibrium constant.

Kc = [isobutane] / [butane]

Kc = 2.5 / 1.0

Kc = 2.5

If we add 0.50 M of isobutane, we get [isobutane] = 2.5 + 0.50 = 3.0 M.

This will be an initial concentration in an ICE chart.

        butane ⇄ isobutane

I           1.0              3.0

C         +x                -x

E        1.0+x           3.0-x

The equilibrium constant is:

Kc = 2.5 = [isobutane] / [butane]

2.5 = (3.0-x) / (1.0+x)

2.5 + 2.5x = 3.0-x

x = 0.14

The equilibrium concentration of butane is:

[butane] = 1.0+x = 1.14 M

Answer:

A) enthalpy of reaction

Explanation:

The region C signifies the enthalpy of reaction.

This diagram is the energy profile of an endothermic reaction. In such reaction, heat is absorbed from the surrounding. At the end of the reaction, the heat of product is lesser than that of the reactants.

it is indeed A) enthalpy of reaction

Answer:..

Explanation:

Moles of [tex]H_2O[/tex] ,

[tex]n_{H_2O}=\dfrac{42}{2\times 1 + 16}=\dfrac{42}{18}\\\\n_{H_2O}=2.33\ moles[/tex]

Moles of acetic acid [tex]HCH_3CO_2[/tex] ,

[tex]n_{A.A}=\dfrac{77}{1 + 12 + 3 + 12 + 16\times 2}=\dfrac{77}{60}\\\\n_{A.A}=1.28\ moles[/tex]

Mole fraction of water :

[tex]M.F_{H_2O}=\dfrac{n_{H_2O}}{n_{H_2O}+n_{A.A}}\\\\M.F_{H_2O}=\dfrac{2.33}{2.33+1.28}\\\\M.F_{H_2O}=0.645[/tex]

Therefore, mole fraction of water in this solution is 0.645 .

Hence, this is the required solution.

Answer:

3

Explanation:

I wish you the best, its three or 2

Answer:

2

Explanation:

Edge 2021

Answer:

1) 97.6%

2) No the purity is not acceptable because the standard is 99.5% purity.

3) Yes I will repeat the titration experiment to confirm my result.

Explanation:

Equation of the reaction;

C7H6O2(aq) + NaOH(aq) ---------> C7H5ONa(aq) + H2O(aq)

From the information provided;

Number of moles of NaOH reacted = concentration × volume = 20.15/1000 × 0.500 = 0.01 moles

From the reaction equation;

1 mole of C7H6O2 reacts with 1 mole of NaOH

Hence 0.01 moles of C7H6O2 will react with 0.01 moles of NaOH

Mass of C7H6O2 reacted = number of moles of C7H6O2 × molar mass of C7H6O2

Molar mass of C7H6O2 = 122.12 g/mol

Mass of C7H6O2 reacted = 0.01 moles × 122.12 g/mol = 1.22 g

Percentage by mass of pure C7H6O2 in the impure sample = 1.22/1.250 × 100 = 97.6 %

Answer:

Changes in environment, food source changes and disease?

Explanation:

I dont know what the answer choices are

Answer:

changes in the environment

Explanation:

like digging big holes.

Hope this helps!

Answer:

Mass = 23.232 g

Explanation:

Given data:

Mass of C₈H₁₈ = 7.58 g

Mass of CO₂ produced = ?

Solution:

Chemical equation:

2C₈H₁₈ + 25O₂      →     16CO₂ + 18H₂O

Number of moles of octane:

Number of  moles =  mass/molar mass

Number of moles = 7.58 g/ 114.23 g/mol

Number of moles = 0.066 mol

Now we will compare the moles of CO₂ with octane from balance chemical equation.

                  C₈H₁₈            :           CO₂

                       2              :              16

                 0.066             :           16/2×0.066 = 0.528

Mass of CO₂ produced:

Mass = number of moles × molar mass

Mass = 0.528 mol × 44 g/mol

Mass = 23.232 g

Answer:

The energy of each transition is approximately [tex]1.98\times 10^{-19}\; \rm J[/tex].

The frequency of photons released in such transitions is approximately [tex]3.00\times 10^{14}\; \rm Hz[/tex].

Explanation:

The Rydberg Equation gives the wavelength (in vacuum) of photons released when the electron of a hydrogen atom transitions from one main energy level to a lower one.

The Rydberg Equation gives the following relation:

[tex]\displaystyle \frac{1}{\lambda_\text{vac}} = R_\text{H} \cdot \left(\frac{1}{{n_2}^2}} -\frac{1}{{n_1}^2}\right)[/tex].

Rearrange to obtain and expression for [tex]\lambda_\text{vac}[/tex]:

[tex]\displaystyle \lambda_\text{vac} = \frac{1}{\displaystyle R_\text{H}\cdot \left(\frac{1}{{n_2}^2} - \frac{1}{{n_1}^2}\right)}[/tex].

In this question, [tex]n_1 = 7[/tex] while [tex]n_2 = 3[/tex]. Therefore:

[tex]\begin{aligned} \lambda_\text{vac} &= \frac{1}{\displaystyle R_\text{H}\cdot \left(\frac{1}{{n_2}^2} - \frac{1}{{n_1}^2}\right)} \\ &\approx \frac{1}{\displaystyle 1.09678 \times 10^{7}\; \rm m^{-1} \cdot \left(\frac{1}{3^2} - \frac{1}{7^2}\right)} \approx 1.0 \times 10^{-6}\; \rm m \end{aligned}[/tex].

Note, that [tex]1.0\times 10^{-6}\; \rm m[/tex] is equivalent to [tex]1000\; \rm nm[/tex]. That is: [tex]1.0\times 10^{-6}\; \rm m = 1000\; \rm nm[/tex].

Look up the speed of light in vacuum: [tex]c \approx 3.00\times 10^{8}\; \rm m \cdot s^{-1}[/tex]. Calculate the frequency of this photon:

[tex]\begin{aligned} f &= \frac{c}{\lambda_\text{vac}} \\ &\approx \frac{3.00\times 10^{8}\; \rm m\cdot s^{-1}}{1.0\times 10^{-6}\; \rm m} \approx 3.00 \times 10^{14}\; \rm Hz\end{aligned}[/tex].

Let [tex]h[/tex] represent Planck constant. The energy of a photon of wavelength [tex]f[/tex] would be [tex]E = h \cdot f[/tex].

Look up the Planck constant: [tex]h \approx 6.62607 \times 10^{-34}\; \rm J \cdot s[/tex]. With a frequency of [tex]3.00\times 10^{14}\; \rm Hz[/tex] ([tex]1\; \rm Hz = 1\; \rm s^{-1}[/tex],) the energy of each photon released in this transition would be:

[tex]\begin{aligned}E &= h \cdot f \\ &\approx 6.62607 \times 10^{-34}\; \rm J\cdot s^{-1} \times 3.00 \times 10^{14}\; \rm s^{-1} \\ &\approx 1.98 \times 10^{-19}\; \rm J\end{aligned}[/tex].

The energy of the transition between n = 7 and n = 3  is 1.96 × 10^-19 J while the frequency is 3 × 10^14 Hz.

Using the Rydberg Equation for energy;

ΔE = -RH(1/n^2final - 1/n^2initial)

Given that;

nfinal = 3

ninitial = 7

RH = 2.18 × 10^-18 J

ΔE = - 2.18 × 10^-18(1/3^2 - 1/7^2)

ΔE = - 2.18 × 10^-18(0.11 - 0.02)

ΔE = - 1.96 × 10^-19 J

For the second part;

Since the wavelength is 1000nm, we have;

λ = 1000nm

c = 3 × 10^8 m/s

f = ?

c = λf

f = c/λ

f = 3 × 10^8 m/s/1000 × 10^-9 m

f = 3 × 10^8 m/s/ 1 × 10^-6 m

f = 3 × 10^14 Hz

Learn more: https://brainly.com/question/18415575

Answer:

Final volume  = 0.44 L

Explanation:

Given data:

Initial volume of balloon = 1.1 L

Initial pressure = 0.80 atm

Final volume = ?

Final pressure = 2.0 atm

Solution:

The given problem will be solved through the Boly's law,

"The volume of given amount of gas is inversely proportional to its pressure by keeping the temperature and number of moles constant"

Mathematical expression:

P₁V₁ = P₂V₂

P₁ = Initial pressure

V₁ = initial volume

P₂ = final pressure

V₂ = final volume  

Now we will put the values in formula,

P₁V₁ = P₂V₂

0.80 atm × 1.1 L = 2.0 atm × V₂

V₂ = 0.88 atm. L/ 2.0 atm

V₂ = 0.44 L