There is a bottle of KCl solution: the volume is 35 mL; its molarity is 3.0 M.
After diluting it into final volume 200 mL, what is the molarity (in M) now?
Answer:
0.525 M
Explanation:
As the problem deals with a dilution process, we can use the following formula:
C₁V₁=C₂V₂Where subscript 1 stands for initial concentration and volume, while 2 stands for the final conditions. Meaning that in this case:
C₁ = 3.0 MV₁ = 35 mLC₂ = ?V₂ = 200 mLWe input the data given by the problem:
3.0 M * 35 mL = C₂ * 200 mLAnd solve for C₂:
C₂ = 0.525 MWhich overall chemical equation is obtained by combining these intermediate equations?
Which of the following chemical reactions will produce a precipitate?
3 KBr + AlPO4 → K3PO4 + AlBr3
Na2CO3 + CaCl2 → CaCO3 + 2 NaCl
NH4OH + KCl → KOH + NH4Cl
ZnCl2 + Mg2SO4 → ZnSO4 + MgCl2
Answer:
Na2CO3 + CaCl2 → CaCO3 + 2 NaCl
Explanation:
A double displacement reaction is a type of metathesis reaction in which two reactants exchange ions to form two new compounds. Double displacement reactions usually involve reacting two soluble salts in aqueous solution resulting in the formation of two products: a soluble salt and an insoluble salt that is produced as a precipitate.
If the reaction of two soluble compounds does not produce a precipitate, the reaction does not result in the formation of a product as basically, all the ions are mixed together in the reaction vessel.
From the given reactions above:
1. 3 KBr + AlPO4 → K3PO4 + AlBr3
The reaction does not proceed to product formation as the two products are all soluble salts.
2. Na2CO3 + CaCl2 → CaCO3 + 2 NaCl
The reaction occurs as one of the products, CaCO3 is insoluble as is produced as a precipitate.
3. NH4OH + KCl → KOH + NH4Cl
The reaction does nott occuras the products are all soluble in water.
4. ZnCl2 + Mg2SO4 → ZnSO4 + MgCl2
The reaction does not occur as the products are all soluble in water.
The acid ionization equilibrium for the weak acid HF is represented by the equation above. To prepare a buffer with a pH=3.50, a student needs to mix 250.mL of 0.100MHF and 250.mL of 0.100MKF. If the student mistakenly mixes 250.mL of 0.0500MHF and 250.mL of 0.0500MKF, which of the following is the result of this error?
The buffer will have a lower capacity because of the smaller number of moles of HF and F− available to react if an acid or base is added.
The buffer will have a lower capacity because of the smaller number of moles of H F and F with a negative 1 charge available to react if an acid or base is added.
The buffer will have a lower capacity because the smaller amount of HF and F− will lower the pH of the buffer, and buffers of lower pH have a lower buffer capacity.
The buffer will have a lower capacity because the smaller amount of H F and F with a negative 1 charge will lower the p H of the buffer, and buffers of lower p H have a lower buffer capacity.
The buffer will have a higher capacity because a larger proportion of HF and F− will ionize at lower concentrations, resulting in the neutralization of any added acid or base.
The buffer will have a higher capacity because a larger proportion of H F and F with a negative 1 charge will ionize at lower concentrations, resulting in the neutralization of any added acid or base.
The buffer will have the same capacity because the large volume of the buffer solution dilutes any added acid or base
Answer:
4
Explanation:
From the options provided the result of the error is ( A ) ; The buffer will have a lower capacity because of the smaller number of moles of HF and F⁻ available to react if an acid or base is added.
Considering the acid ionization equilibrium for the weak acid HF.
A buffer solution is a solution that its PH value remains unchanged when a small amount of acid or base to added to the solution, therefore when the moles of acid or base present in the buffer solution is high enough the buffer solution will have a high buffer capacity. from the mistake of the student the number of moles present is lesser which means that the buffer solution will have a lower capacity
Hence the buffer will have a lower capacity because of the smaller number of moles of HF and F⁻ available to react is an acid or base is added.
learn more : https://brainly.com/question/2131477
Calculate how many grams of sodium acetate you expected to make from your starting amount of sodium bicarbonate (0.5g). This is your theoretical yield.
Equation: NaHCO3 + HC2H3O2 = NaC2H3O2 + H2O + CO2
What is the name of the structure formed when fertilization occurs?
Answer:
zygote
Explanation:
I got this online
Answer:
ᘔYᘜOTᗴ:=> In human fertilization, a released ovum (a haploid secondary oocyte with replicate chromosome copies) and a haploid sperm cell (male gamete)—combine to form a single 2n diploid cell called the zygote.
ʰᵒᵖᵉ ⁱᵗ ʰᵉˡᵖˢ
[tex] \infty \infty [/tex]
how can a scientist make a solution using salt and water?
Answer:
by boiling water and add the salt
Explanation:
because salt dissolves better if mixed with hot water which makes the process faster and effective
Plz help me well mark brainliest if you are correct!
Answer:
c: heat and erosine
Explanation:
How many protons, neutrons, and electrons does potassium-38 have?
Answer:
19 protons, 20 neutrons and 18 electrons.
Explanation:
What is the atomic number of the atom
Use Lewis theory to determine the chemical formula for the compound formed between Mg and Br. Group of answer choices Mg3Br2 Mg2Br3 Mg2Br MgBr2 MgBr
Answer:
MgBr2
Explanation:
(Mg^2+) + (Br^1-)
For every Mg we need 2 Br to balance out the compound.
Since magnesium has two outer electrons, it can donate one electron each to two bromine atoms having seven outer electrons in order for each of the atoms to have a complete octet.
Since the octet rule states that a stable atom must have eight electrons in its outermost shell, it follows that magnesium could give out two of its outermost electrons to two bromine atoms.
When that happens, each bromine atom which previously had seven electrons now have eight electrons, satisfying the octet rule. The correct formula of the compound is MgBr2.
Learn more: https://brainly.com/question/11527546
How many atoms are in 20.4 g of beryllium
Worth 100 points plus ill mark brainliest
How many grams of sodium phosphate ( Na₃PO₄ )are required to make 125 milliliters of a 0.240 Molar solution?
4.92
6.48
8.44
12.5
Answer:
4.92 grams of sodium phosphate (Na₃PO₄) are required to make 125 milliliters of a 0.240 M.
Explanation:
Molarity is a measure of concentration that indicates the number of moles of solute that are dissolved in a given volume.
The molarity of a solution is calculated by dividing the moles of the solute by the volume of the solution:
[tex]Molarity=\frac{number of moles}{volume}[/tex]
Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].
In this case:
Molarity= 0.240 Mnumber of moles= ?volume= 125 mL= 0.125 LReplacing in the definition of molarity:
[tex]0.240 M=\frac{number of moles}{0.125 L}[/tex]
Solving:
number of moles= 0.240 M*0.125 L
number of moles= 0.03 moles
Being the molar mass of sodium phosphate 164 g/mole, that is, the mass of one mole of the compound, you can calculate the mass of 0.03 moles using the following rule of three: if 1 mole of the compound has 164 grams, 0.03 moles contains how much mass?
[tex]mass=\frac{0.03 moles*164 grams}{1 mole}[/tex]
mass= 4.92 grams
4.92 grams of sodium phosphate (Na₃PO₄) are required to make 125 milliliters of a 0.240 M.
45. What is the H ion concentration of an aqueous solution
in which the OH-ion concentration is 1 x 10-2 mole
per liter?
A) 1 X 10-14 M
C) 1 x 10-9M
B) 1 x 10-12 M
D) | 10-2M
Answer:
= 1 X 10⁻⁻¹²M
Explanation:
At 25°C & 1atm [H⁺][OH⁻] = 1 x 10⁻¹⁴ => [H⁺] = 1 X 10⁻¹⁴/[OH⁻] = 1 X 10⁻¹⁴/1 X 10⁻²
= 1 X 10⁻⁻¹²M
Explain in detail how low density polyethylene is made
Answer:
Low-density polyethylene is manufactured by the process of the polymerization of ethylene at very high temperatures in a tubular reactor. In this tubular reactor, high-pressure polymerization allows further copolymerization of ethylene with polar co-monomers. The tubular process has an advantage over autoclave process.
Explanation:
please mark brainliest
Consider the following scenario
A drought hits the habitat of a semi-aquatic bird population. All ponds dry up, and fish populations decline. There are two groups of birds in the population that differ in leg length and diet. Long-legged birds eat fish, while short-legged birds eat insects. The drought has little effect on insect populations
What is the main selective pressure in this scenario?
Oleg length
Odrought
Ofish population
Oinsect population
Answer: b
Explanation: jk
Using table 3, predict the molecular geometry of the following molecules:
a. The central atom bonded to four substituent atoms and having no lone pair.
b. The central atom bonded to three substituent atoms and having one lone pair.
c. The central atom bonded to two substituent atoms ảnd having
one lone pair.
d. The central atom bonded to two substituent atoms and having no lone pair.
Answer:
see explanations
Explanation:
a. The central atom bonded to four substituent atoms and having no lone pair.
This is an AX₄ geometry => tetrahedron
b. The central atom bonded to three substituent atoms and having one lone pair.
This is an AX₃E geometry => pyramidal
c. The central atom bonded to two substituent atoms ảnd having
one lone pair.
This is an AX₂E geometry => bent angular
d. The central atom bonded to two substituent atoms and having no lone pair.
This is an AX₂ geometry => linear
_______________________________
Based upon the VSEPR Theory there are 6 parent geometry configurations and associated derived geometries.
Parent geometries => Derivatives => Examples
linear => AX₂ (BeCl₂) trigonal planer => AX₃ (BH₃) => AX₂E (Bent) (:SnCl₂)tetrahedral => AX₄ (CH₄) => pyrimidal AX₃E (NH₃) => Bent AX₂E₂ (H₂O)trigonal bipyrimidal => AX₅ (PCl₅) => seesaw AX₄E (:SF₄) => T-shaped AX₃E₂ (ClF₃ (T-shaped) => linear AX₂E₃ (XeF₂)octahedral => AX₆ (SF₆) => sqr pyramid AX₅E (IF₅) => sqr planar AX₄E₂ (XeF₄) pentagonal bipyrimidal => AX₇ (ClF₇)For graphic images of each geometry do an internet search for 'molecular geometry'.
In the context of a balanced chemical equation, a____is a number to the lower right of an element or ion within formula and it applies to____. A____is a number to the left of a formula and it applies to_____. Only_____should be added or changed when balancing chemical equations.
Answer:
Explanation:
The preceding chapter introduced the use of element symbols to represent individual atoms. When atoms gain or lose electrons to yield ions, or combine with other atoms to form molecules, their symbols are modified or combined to generate chemical formulas that appropriately represent these species. Extending this symbolism to represent both the identities and the relative quantities of substances undergoing a chemical (or physical) change involves writing and balancing a chemical equation. Consider as an example the reaction between one methane molecule (CH4) and two diatomic oxygen molecules (O2) to produce one carbon dioxide molecule (CO2) and two water molecules (H2O). The chemical equation representing this process is provided in the upper half of Figure 1, with space-filling molecular models shown in the lower half of the figure.
Balance the single replacement chemical reaction.
Explanation:
B) 3CuCl2+2AL..….2AlCl3+3Cu
hope it helps.
Balanced Equation:
3CuCl₂ + 2Al = 2AlCl₃ + 3Cu
Knives should be stored in cluttered drawers.
True or false
What is the pressure inside a container of 3 moles of gas with a volume of 60 Liters at a temperature of 400 K?
I just need the answer not a link please :)
What are 2 comparisons between organisms and music?
Help me fast I put 98 points pls help me no links I am serious.
3rd repost
What is the chemical formula for iodine trichloride?
ОА. ЗІСІ
O B. ICI:
O c. 1, Cl₂
O D. 12C1
Answer:
I₂CL₆
Explanation:
Answer12C1
Explanation:
Is anyone good at chemistry if so can someone help me please ?
(NO LINKS)
This requires familiarity with the different theories (or concepts) of acids and bases.
On the Arrhenius concept, an acid is a substance that produces an H⁺ ion in water such that the H⁺ concentration increases, and a base is a substance that produces an OH⁻ ion in water such that the OH⁻ concentration increases.
On the Brønsted–Lowry concept, an acid is a substance that donates a proton (which is basically an H⁺ ion) in a solvent, and a base is a substance that accepts a proton in a solvent.
On the Lewis concept, an acid is a substance that accepts an electron pair in a solvent, and a base is a substance that donates an electron pair in a solvent.
The concepts become progressively broader, i.e., the Arrhenius concept is the most restrictive and the Lewis concept is the least restrictive. As a corollary, an Arrhenius acid or base is also both a Brønsted–Lowry acid or base and a Lewis acid or base, respectively; a Brønsted–Lowry acid or base is not necessarily an Arrhenius acid or base, but an Arrhenius acid or base is also a Lewis acid or base, respectively. And finally, a Lewis acid or base may not necessarily be either an Arrhenius or a Brønsted–Lowry acid or base.
So, with the above concepts in mind, we can match the statements in column A with the type of acid or base in column B:
[tex]\begin{center}\begin{tabular}{ c c } 1 & Bronsted Lowry acid \\ 2 & Bronsted Lowry base \\ 3 & Arrhenius acid \\ 4 & Arrhenius base \\ 5 & Lewis base \\ 6 & Lewis acid\end{tabular}\end{center}[/tex]
Pls help I need help ASAP!!! Be accurate
What transition energy corresponds to an absorption line at 502 nm?
A. 4.56 x 10-19
B. 1.76 10-19
C. 2.53 x 10-19
D. 3.96 10-19 J
Answer:
D 3.96 10-19J
Explanation:
I took the test
S- 2500m
112
VODO
4. Two waves are traveling in the same medium with a speed of 340 m/s. What is the difference in
frequency of the waves if the one has a wavelength of 5.0 m and the other has a wavelength of
0.2 m?
Answer:
1632 Hz
Explanation:
We'll begin by calculating the frequency of each wave. This can be obtained as follow:
1st wave:
Velocity (v) = 340 m/s.
Wavelength 1 (λ₁) = 5 m
Frequency 1 (f₁) =?
v = λ₁f₁
340 = 5 × f₁
Divide both side by 5
f₁ = 340 / 5
f₁ = 68 Hz
2nd wave:
Velocity (v) = 340 m/s.
Wavelength 2 (λ₂) = 0.2 m
Frequency 2 (f₂) =?
v = λ₂f₂
340 = 0.2 × f₂
Divide both side by 0.2
f₂ = 340 / 0.2
f₂ = 1700 Hz
Finally, we shall determine the difference in the frequency of both waves.
This can be obtained as follow:
Frequency 1 (f₁) = 68 Hz
Frequency 2 (f₂) = 1700 Hz
Difference =?
Difference = f₂ – f₁
Difference = 1700 – 68
Difference = 1632 Hz
Describe two realistic demands protestors could bring forward in their peaceful protest so that they dont face the same situation in future
Answer:
I do not know the Answer I'm just trying to get my point
Explanation:
Thank You
The two realistic demands protestors could bring forward in their peaceful protest include:
Adequate securityProvision of social amenities.Who is a Protester?Thus it is referred to an individual which publicly demonstrates opposition to something.One of the roles of the government is to protect lives and properties.
Making realistic demands during a peaceful protest is looked into in most cases.
Read more about Protester here https://brainly.com/question/11505871
How are cells organized?
A: Organs
B: Organelles
C: Tissues
Answer:
tissues,organs, organelles
Given a 0.5 M stock solution of aqueous NaCl, how much of the stock solution would you need to make a 50 mL sample of 0.25 M aqueous NaCl solution? How much water would you need to add to the NaCl solution?
Answer:
25 ml of stock
Explanation:
Molarity x Volume of Concentrated Stock = Molarity x Volume of Diluted Stock
=> Mc x Vc = Md x Vd => (0.5M)(x) = (0.25M)(50 ml)
=> x = Vc = (0.25M x 50 ml) / (0.50M) = 25 ml of stock