4. An archer pulls a bowstring back 0.440 m, and the spring constant of the bow is 545 N/m.
a.) Find the amount of work the archer did to draw the bow.
b.) Find the speed an arrow of mass 0.060 kg will have when it is shot from the bow.
Assume no losses from friction

Answers

Answer 1

Answer: (a)part:545nm multiply by 0.440m=239.8JEWELS(J)

(B):1/2MULTIPLY BY MVSQUARE(APPLY THE FORMULA OF KINETIC ENERGY)REARANGE THE FORMULA,V=2.13MS

Explanation:

SO FOR PART A, IN ORDER TO CALCULATE THE WORK DONE YOUR SUPPOSE TO APPLY THE FORMULA FORCE MULTIPLY BY DISTANCE WHICH IS THE FORMULA FOR WORK DONE,IN THIS SCENARIO YOU HAD A FORCE OF 545NM AND A DISANCE OF 0.440,SO I ORDER TO FIND THE WORK DONE WE MULTIPLIED THEM BOTHE ACCORDING TO THE FORMULA AND GOT THE ANSWER.

FOR PARTB,I JUST SIMPLY APPLIED THE FORMULA FOR KINETIC ENERGY AND SIMPLY REARRANGED IT IN ORDER TO FIND THE VELOCITY.I MADE V THE SUBJECT OF THE FORMULA.


Related Questions

How do scientists know that seafloor spreading occurs?Explain how this spreading causes the continents to seperate.

Answers

second question: tensional stress causes fractures to occur in the lithosphere.

What is the speed of a wave that has a frequency of 440 Hz and a wavelength of 0.78 m? O A. 564 m/s m B. 0.003 m/s C. 343 m/s D. 0.002 m/s​

Answers

Explanation:

velocity = frequency × wave length

velocity = 440 × 0.78

velocity = 343 m/sec

can you please mark my answer brainliest ♥️

A crane lifts a 450 kg concrete to the top of a 50 m building in 5 s.
Assuming g= 10 m/s
)
2
a) The potential energy of the concrete.
, calculate;
b) The power developed by the crane

Answers

Explanation:

Given : m=600kg h=20 m

Time of operation t=2 min =120 s

Work done in lifting a box W=mgh=600×10×20=120000

Power required P=

t

W

=

120

120000

=1000 watts

Control rods are used to slow down the reaction in the reactor core when the core becomes too hot. Please select the best answer from the choices provided T F.

Answers

The best answer is true. Yes, control rods are used to slow down the reaction in the reactor core when the core becomes too hot.

What is a nuclear reactor?

A nuclear reactor, often known as an atomic pile, is a device that initiates and controls nuclear chain reactions or nuclear fusion processes.

Nuclear reactors are used in nuclear power plants to generate energy as well as in nuclear marine propulsion.

Control rods are employed in nuclear reactors because the processes that occur in a nuclear reactor are very exothermic.

As a result, when these control rods are infused into a nuclear reactor, they absorb neutrons and aid in the management of the chain reaction. As a result, the rate of the chain reaction is brought under control.

As a result, we may infer that the statement control rods are employed to slow down the reaction in the reactor core when it gets too hot is correct.

Hence the best answer is true. Yes, control rods are used to slow down the reaction in the reactor core when the core becomes too hot.

To learn more about the nuclear reactor refer to the link;

https://brainly.com/question/896706

17. Suppose you attach the object with mass m to a vertical spring originally at rest, and let it bounce up and down. You release the object from rest at the spring’s original rest length. (a) Show that the spring exerts an upward force of 2.00mg on the object at its lowest point. (b) If the spring has a force constant of 10.0N/m and a 0.25-kg-mass object is set in motion as described, find the amplitude of the oscillations. (c) Find the maximum velocity.

Please show all of your work.

Answers

Answer:

See below ↓

Explanation:

Step 1 : Diagram

In attachment

Step 2

We choose the system to be the spring, the block, and the Earth and it is isolatedWe put all the data in the figure we have created and create a zero level (initial height) of the block to be yₓ = 0 and the final position, when it stops and moves upwards again, to be yₙ = -ANo external forces are exerted on the system and no energy comes in or out of the systemHence,

⇒ ΔE = 0

⇒ Eₙ - Eₓ = 0

⇒ Eₙ = Eₓ

⇒ Kₙ + Uₙ + Pₙ = Kₓ + Uₓ + Pₓ

Final kinetic energy is 0 at the lowest point

⇒ Uₙ + Pₙ = Uₓ + Pₓ

Step 3

Initial potential energy is 0 [zero level = initial height]

⇒ Uₙ + Pₙ = Uₓ

And we know that spring was originally at normal length, so initial spring energy is also 0

⇒ Uₙ + Pₙ = 0

⇒ 1/2kxₙ² + mgyₙ = 0

⇒ 1/2kxₙ² = -mgyₙ

We know xₙ = A and yₙ = -A from the diagram

⇒ 1/2kA² = -mg(-A)

⇒ 1/2kA² = mgA

⇒ [1/2kA = mg]

Step 4

Spring force is given by : F = -kxNote : x = A

⇒ F = kA

⇒ k = F/A

⇒ Plug 'k' into the equation found at the end of Step 3

⇒ 1/2(F/A)(A) = mg

⇒ 2F = mg

F = 2mg (a)

Step 5

We know the spring will stop oscillating and be at rest at the new equilibrium position of the system

⇒ F - mg = 0

⇒ F = mg

We know that :

⇒ F = -kx

In the case x = yₙ

⇒ kyₙ = mg

⇒ yₙ = mg/k

⇒ yₙ = 0.25 x 9.8 / -10

⇒ yₙ = -0.245 m

⇒ yₙ = A

⇒ yₙ = 0.245 m (b)

Step 6

v(max) = Aωv(max) = A√k/mv(max) = 0.245 x √(10/0.25)v(max) = 1.55 m/s (c)

Which red line shows the same action spectrum corrected for the unequal number of photons emitted across the visible spectrum?.

Answers

The visible spectrum is composed of red, orange,yellow,  green, blue, violet, indigo.

What is visible spectrum?

The visible spectrum refers to the portion of the electromagnetic spectrum that can be seen with the eyes. All other portions of the electromagnetic spectrum are invisible.

The question is incomplete as the details are missing. The visible spectrum is composed of red, orange,yellow,  green, blue, violet, indigo.

Learn more about the visble spectrum: https://brainly.com/question/1596783

Identify the solutions (homogeneous mixtures) in the list below. check all that apply. lead, an alloy of tin and lead ammonia, a pure compound of nitrogen and hydrogen window cleaner, a mixture of ammonia and coloring dissolved in water gasoline, a mixture of organic liquids with a fixed composition throughout distilled water, pure with no metals or particles

Answers

Answer:

Brainliest pls

Explanation:

lead solder, an alloy of tin and lead

window cleaner, a mixture of ammonia and coloring dissolved in water

gasoline, a mixture of organic liquids with a fixed composition throughout

The solutions and homogeneous mixtures in the given list are:

A. Lead solder, an alloy of tin and lead.

D. Window cleaner, a mixture of ammonia and coloring dissolved in water.

E. Gasoline, a mixture of organic liquids with a fixed composition throughout.

What is a solution?

A solution can be defined as a special type of homogeneous mixture that comprises a solute and a solvent.

A homogeneous mixture can be defined as any solid, liquid, or gaseous mixture which has an identical (uniform) composition and properties throughout any given sample of the mixture.

In Science (Physics), all solutions are considered to be a homogeneous mixture because their constituents are uniformly (evenly) distributed.

In conclusion, the solutions and homogeneous mixtures in the given list are:

Lead solder, an alloy of tin and lead.Window cleaner, a mixture of ammonia and coloring dissolved in water.Gasoline, a mixture of organic liquids with a fixed composition throughout.

To know more about solution follow

brainly.com/question/22070951

Students in science are studying solutions and the dissolving rate of solids. One group was given some instant lemonade mix to dissolve. They used a packet of lemonade crystals and a packet of lemonade powder. The students dissolved the same amount of each solid into 100 ml of water. They varied the water temperature. List ALL the possible conclusions based the data the students collected?

Answers

Answer:

a-d

Explanation:

hope this helps

By what means can the internal energy of a closed system increase?.

Answers

Answer:

when work is done on the system or heat comes into the system


what is the ionic compound of Ba(NO3)2

Answers

Answer:

Barium nitrate

A current in a wire increases from 2 a to 6 a. how will the magnetic field 0.01 m from the wire change? it increases to four times its original value. it increases to three times its original value. it decreases to one-fourth its original value. it decreases to one-third its original value.

Answers

Answer:

 It increases to three times it's original value.

Explanation:

B

Hi there!

Recall the equation for the magnetic field of a wire (assuming infinite):

[tex]B = \frac{\mu _0 i_{encl}}{2\pi r}[/tex]

B = Magnetic field (T)
μ₀ = Permeability of Free Space (Tm/A)

i = enclosed current (A)
r = distance from wire (m)

From the equation, we can see that there is a DIRECT relationship between the current and the magnetic field.

Therefore, if the current is increased by a factor of 3, the FIELD will also be increased by a factor of three.


What is Al's hypothesis?
options:

If I freeze fresh water and salt water then the salt water will freeze more quickly because salt increases the freezing point temperature.


If I freeze fresh water and salt water then the fresh water will freeze more quickly because salt lowers the freezing point temperature


If I freeze fresh water and salt water then both will freeze at the same time because salt doesn't affect the freezing time.


If I freeze cool aid and water then the water will freeze more quickly because cool aid increases the freezing point temperature.

Answers

Answer:

This is your answer

If I freeze fresh water and salt water then the fresh water will freeze more quickly because salt lowers the freezing point temperature

Explanation:

I hope it helped you

do you think your real?

Answers

Answer: Yes I am alive.

Yes I am not a robot

Which of the following is true about the horizontal component of a
projectile?

A: There is no acceleration

B: The change in displacement is always negative

C:The time is different than the vertical component

D:There is no initial velocity

Answers

Answer:

a

Explanation:

Two blocks each of mass m are attached to the ends of a massless rod

Answers

The net torque on this system is (ml2g-ml1g)k

What is Torque?

This refers to the type of force that causes rotation in objects which has mass and is a twisting force

Based on the complete question, we can see the given parameters:

The torque due to farther mass above the pivot is ml2gk

The torque due to nearer mass about the pivot is ml1gk

Therefore, the net torque is (ml2g-ml1g)k

Read more about torque here:
https://brainly.com/question/14839816

The net torque on this system in which two blocks each of mass m are attached to the ends of a massless rod, above pivot, is (ml₂g-ml_₁g)\hat k.

What is torque?

The torque of a body is the rate of change of angular momentum of the body. Torque is the product of moment of inertia and the angular acceleration.[tex]\tau =I\times \alpha[/tex][tex]\tau=mlg[/tex]

Here, (I) is the moment of inertia and (α) is the angular acceleration.

Two blocks each of the mass m are attached to the ends of a massless rod which pivots as shown in fig.

Initially, the rod is held in the horizontal position and then released. When, the mass was kept at farther to pivot, then the value of torque is,

[tex]\tau=ml_2g\hat k[/tex]

When, the mass was kept at nearer to pivot, then the value of torque is,

[tex]\tau=-ml_1g\hat k[/tex]

Thus, the net torque on this system above pivot is,

[tex]\tau=ml_2g\hat k+(-ml_2g\hat k)\\\tau=(ml_2g-ml_1g)\hat k[/tex]

Thus, the net torque on this system in which two blocks each of mass m are attached to the ends of a massless rod, above pivot is (ml₂g-ml_₁g)\hat k.

Learn more about the torque here;

https://brainly.com/question/25482609

#SPJ4

Question 4 of 5
The picture shows a model of a cell.
W
What is the main function of the part labeled Win the model?

Answers

Explanation:

it is not clear. I can't see w.

HELP

1. Which of the following is most useful in determining the kinetic energy of a 50 g battery- powered car

traveling a distance of 10 m?

A) Beaker

B) Voltmeter

C) Thermometer

D) Stopwatch

Answers

The stopwatch will be the most useful in determining the kinetic energy of a 50 g battery- powered car traveling a distance of 10 m.

What is kinetic energy?

Kinetic energy is the energy of a body possessed due to motion.

This means that for an object to possess kinetic energy, it must be in motion.

The kinetic energy is measured in Joules, which is a product of the mass of the substance and the time taken to travel a distance.

A stopwatch is an instrument used to measure time as one of the components of kinetic energy.

Therefore, the stopwatch will be the most useful in determining the kinetic energy of a 50 g battery- powered car traveling a distance of 10 m.

Learn more about kinetic energy at: https://brainly.com/question/12669551

What phase of the moon would someone
on Earth see when the moon is at
Positions A through F?

Answers

First quarter is the phase of the moon would someone on Earth will see  when the moon is at Positions A through F.

What is First Quarter?

This is the phase which occurs when the moon is 90 degrees away from the sun in the sky and is half-illuminated from our point of view.

When looking it at the moon from point F it's half-illuminated which depicts the First quarter moon phase.

Read more about First Quarter of moon here https://brainly.com/question/13538936

A bungee cord with a spring constant of 800 StartFraction N over m EndFraction stretches 6 meters at its greatest displacement. How much elastic potential energy does the bungee cord have?

Answers

Answer:

14,400

Explanation:

I guessed and I think it's right Soo

What is the length of a pendulum that has a period of 4. 89 seconds?

Answers

Hi there!

We can use the following equation for a simple pendulum:

[tex]T = 2\pi \sqrt{\frac{L}{g}}[/tex]

T = Period (4.89 s)
L = length (? m)
g = acceleration due to gravity (9.8 m/s²)

Rearrange the equation to solve for L.

[tex]T^2 = 4\pi ^2 \frac{L}{g}\\\\L = \frac{gT^2}{4\pi ^2}[/tex]

[tex]L = \frac{(9.8)(4.89^2)}{4\pi^2} = \boxed{5.936 \frac{m}{s}}[/tex]

A pendulum is a body hanging from a fixed point that swings back and forth under the effect of gravity. The length of a pendulum that has a period of 4.89 seconds is 5.936 meters.

What is a pendulum?

A pendulum is a body hanging from a fixed point that swings back and forth under the effect of gravity. Pendulums are employed to govern the movement of clocks because the time interval for each full oscillation, known as the period, remains constant.

Given that the time period is 4.89 seconds, therefore, the length of the pendulum can be written as,

[tex]\rm T = 2\pi \sqrt{\dfrac{L}{g}}\\\\4.89 = 2\pi \sqrt{\dfrac{L}{9.81}}\\\\L = 5.936\ m[/tex]

Hence, the length of a pendulum that has a period of 4.89 seconds is 5.936 meters.

Learn more about Pendulum:

https://brainly.com/question/14759840

#SPJ4

When you serve the ball, if the ball does not land in the opposite side rectangle this is called a ______. question 2 options: fault miss volley foul

Answers

Answer:

its called a fault

Explanation:

Its when u mess up

If the two blocks are touching, what will happen to the thermal energy in this system?

Answers

Explanation:

What are the integers between -4 and +4?

A 10-A current is maintained in a simple circuit with atotal resistance of 209 ohm. What net charge passes through any point in a circuit during a 1-minute interval?

Answers

Answer:

I = Q / t          definition of current I

Q = i t = 10 Coul/sec * 60 sec = 600 Coul

A 10-A current is maintained in a simple circuit with a total resistance of 209 ohms, then the net charge passes through any point in a circuit during a 1-minute interval would be 6000 Coulombs.

What is an electric charge?

Charged material experiences a force when it is exposed to an electromagnetic field due to the physical property of electric charge. You can have a positive or negative electric charge.

Electric current is defined as the charge per unit of time.

The mathematical relation between current and the electric charge

I =Q/T

Let us first convert the time period of minutes into seconds

1 min = 60 seconds

10  min = 10*60 seconds

            =600 seconds

Q = I*t

   =10*600

   =6000 Amperes

Thus, the net charge that passes through any point in a circuit during a 1-minute interval would be 6000 Amperes.

To earn more about an electric charge from here, refer to the link;

brainly.com/question/8163163

#SPJ2

When a 10-V battery is connected to a resistor, the current in the resistor is 2 A. What is the resistor's value

Answers

Answer:

5 ohms

Explanation:

V = IR

10 = 2 R

R = 5

if i were to (HYPOTHETICALLY) punt a small child off of a building, (HYPOTHETICALLY) how long would it take for the (VERY HYPOTHETICAL) child to reach maximum velocity?
(HYPOTHETICALLY) the child would weigh 88 pounds, have blond hair and blue eyes, and (HYPOTHETICALLY) be named "Jacob."

THIS QUESTION IS HYPOTHETICAL AND I AM TOTALLY NOT PLANNING TO COMMIT AN ATROCITY!

Answers

Answer:

Around 190-ish miles per hour when it hit the ground maybe

Explanation:

A 0.105- kg hockey puck moving at 24 m/s is caught and held by a 75-kg goalie at rest. With what speed does the goalie slide on the ice after catching the puck? Define the puck and the goalie as a system.

please show work, help

Answers

Answer:

0.03 m/s

Explanation:

Applying law of conservation of momentum,

m₁v₁ + m₂v₂ = (m₁ + m₂)v0.105(24) + 75(0) = (0.105 + 75)v75.105v = 2.52v = 2.52/75.105v = 0.03 m/s

A bus start moving from rest .If its velocity after 5 seconds becames 10 m/s ,find acceleration

Answers

Answer:

2 [tex]m/s^{2}[/tex]

Explanation:

acceleration = (final-initial velocity) / time

                     = (10-0)/5

                     =2

please hurry I will be forever grateful <3

List some advantages and disadvantages of series and parallel circuits.​

Answers

Advandages:

1. Every unit that is connected in a parallel circuit gets equal amount of voltage.

2. It becomes easy to connect or disconnect a new element without affecting the working of other elements.

3. If any fault happened to the circuit, then also the current is able to pass through the circuit through different paths.

Disadvantages:

1. It requires the use of lot of wires.

2. We cannot increase or multiply the voltage in a parallel circuit.

3. Parallel connection fails at the time when it is required to pass exactly same amount of current through the units.

You calibrate a set of automobile springs using a 25 kg car battery, attached to a rope that runs over a pulley, as shown in the diagram.

You find that the spring is pulled out by 0.06 meters. Compute the spring constant, k, in N/m.
Just type in the numeric part of your answer, to the nearest 0.1 N/m.

Answers

For an automobile spring using a 25 kg car battery, the spring constant is mathematically given as

K=4.08.3N/m

What is the spring constant?

Question Parameter(s):

a 25 kg car battery

The springs are pulled out by 0.06 meters

Generally, the equation for the Force  is mathematically given as

F=mg

Therefore

F=(25*9.8)

(25*9.8)=K(0.06)

K=4.08.3N/m

In conclusion, the spring constant

K=4.08.3N/m

Read more about Force

https://brainly.com/question/13370981

Where are globular clusters located in the milky way?.

Answers

Answer:

Globular star clusters are located in the great spherical halo.

Explanation:

Hope this helps! :)

Other Questions
When asked to factor the x^2 - 144, a student gives the answer (x - 12)(x - 12). What is wrong with this answer? A. Both minus signs should be plus signs lB. One of the minus signs should be a plus sign C. There is nothing wrong with this answer D. -1 is also a factor Se escriben palabras de cario. Which of the following words is POSITIVE?counterintuitive,exacerbate,synchronized,excessive, A pizza is divided into 12 slices. If there are eight slices left, what fraction of the pizza isremaining? a locker requires a three-digit code to open the lock. the code must contain one letter and two numbers, and no letter or number can be repeated. you can choose from among four letters, a,b,c and d and two numbers, 5 and 6 For the graphed function f(x) = (4)x - 1 + 2, calculate the averagerate ofchange from x = 1 to x = 2. please help :(I'll give brainliest! Mention the direct consequence of the following factors on the chemical behaviour oftransition elements:1) Transition elements can lose as well as accept electrons and exhibit a variety of oxidationstates. What are some examples of totalitarian state? Which claim is supported by the information supplied by the map?AJapan pursued territories in Asia that were rich in mineral resources.BJapan's attack on Pearl Harbor led to United States involvement in World War II.Japan's control of Manchuria preceded its control of the Korean peninsula.DJapan was able to control the Soviet Union and Manchuria by the end of World War II. Can someone help me please Which word helps signal that this is a procedural text? whether adventure process possible. Where did elizabeth and hamilton meet in the musical the functionary f is such that f(x)=7x-6 a)work out the value of f(4) b)hence, or otherwise,work out the value of f^-1(22) A farmer ploughts his lands in 12 days if he use 5 tractors ow long will it if he uses 3 tractors? The upward-sloping portion of the long-run average cost curve is a result of:. The area of the triangle below is 4.06 square meters. What is the length of the base? The rocks crystal depends on how it cools 1. Escribe el infinitivo de los siguientes verbos:Cayendo, trayendo, oyendo, yendo, creyendo The sun is a distant star. The sun is at the center of Earth's solar system. Which revision uses an appositive to combine these two sentences correctly? A distant star is located at the center of Earth's solar system. A distant star, the sun, is at the center of Earth's solar system. The sun is a star, which is at the center, of Earth's solar system. The sun is at the center of Earth's solar system because it is a star.