4. Explain how energy is transformed in a spring.

Answers

Answer 1

Answer:

As spring falls in a vertical plane, the change in gravitational potential energy is transformed to elastic potential energy.

Explanation:

To calculate the spring constant, Hooke's law was used, as well as potential energy to calculate the gravitational and elastic potential energy.


Related Questions

What is the momentum of a 0.5 kg football thrown -5 m/s to the left?

Answers

Answer: -2.5 kg/m/s

Explanation: Momentum is equal to mass times velocity, so you do 0.5 kg times -5 m/s, and you get -2.5 kg/m/s.

-2.5 km , this is because of the cauclatopns i’ve made

Which statements describe how heat flows in foil? Check all that apply.

Answers

Answer:

Heat flows from a warmer object to a cooler object.

What are the mechanical advantage and mechanical efficiency of a lever that requires an input force of 40 N and lifts and lifts a boulder that weighs 80 N?

Answers

Answer:

2 , 200%

Explanation:

Mechanical advantage of a machine is defined as how much the machine multiplies the applied force.

It is given that :

Input force of the lever = 40 N

The weight of the boulder or the output force = 80 N

Therefore, the mechanical advantage = output force / input force

                                                               [tex]$=\frac{80}{40}$[/tex]

                                                               = 2

Mechanical efficiency is obtained by the dividing the output by the input and multiplying it with 100.

i.e. Efficiency = output / input x 100

                      [tex]$=\frac{80}{40}\times 100$[/tex]

                     = 200 %

What is the momentum of a 4000g object moving to the left (negative direction) at 25 m/s?

Answers

Answer:

-100 kg · m/s

Explanation:

We can find the momentum of an object using the formula:

p = mv where p = momentum (kg * m/s), m = mass (kg), v = velocity (m/s), and p and v are vectors

Let's start by converting the mass of the object to kilograms.

4000 g → 4 kg

Since the left direction is the negative direction, we know that the velocity of the object is -25 m/s.

Using these variables, we can solve for p in the formula.

p = mv p = (4 kg)(-25 m/s) p = -100 kg · m/s

The momentum of the object is -100 kg · m/s.

An egg sinks in fresh water but floats on concentrated salt solution​

Answers

the salt solution exerts a greater up thrust on the egg which balances the weight of the egg, so the egg floats in a strong salt solution but sinks in fresh water

I NEED HELP ASAP!!!


The product of the component of a force along the direction of displacement and the magnitude of the displacement are known as:

a.

net force

c.

velocity

b.

work

d.

power

Answers

Answer:

a

Explanation:

thats yes according to kinematics

Two dogs are pulling on a chew toy. One dog pulls the chew toy with 64 N [E] and
the other pulls the chew toy with 31 N [W]. Determine the ACCELERATION of the 3
kg chew toy.

Answers

Answer:

Eastward, at 11 m/s^2

Explanation:

64N-31N=unbalanced force of 33N

F=ma

33N=(3kg)a

a=11m/s^2 to the East

The parking brake on a 1200kg automobile has broken, and the vehicle has reached a momentum of 7800kg.M/s. What is the velocity of the vehicle?

Answers

Ok so the equation for momentum is:
v=p/m

So you would do:
7800/1200=6.5

So the answer is:
6.5 m/s

Hope this helps :)

formula of average speed​

Answers

Answer:

Hey mate....

Explanation:

This is ur answer.....

Hope it helps!

Mark me brainliest....

FOLLOW ME!!! :)

A car is moving at 11m/s and has a mass of 1200 kg. What is the momentum of her car?

(no links please!)​

Answers

Answer:

momentum= mass x velocity

= 11 x 1200 =13200kgm/s

does anybody have social media and could help me with my homework ? i will send you pictures of my work please all of my work is due tomorrow!! i need help

Answers

Yes I do I can help if you need some

2. How does laser light differ from
normal light?​

Answers

Answer:

Laser light differs from normal light because laser lights are monochromatic which means it only shines one color and only that color :3

Explanation:

:3

The major difference between laser light and light generated by white light sources (such as a light bulb) is that laser light is monochromatic, directional and coherent. ... Coherent means that the waves of light are in phase with each other. A light bulb produces many wavelengths, making it incoherent.

What is the kinetic energy of a 25 kg object moving at a velocity of 4 m/s?

Answers

the answer is 27, i’m a chemistry teacher

Thus Kinetic energy of the object is 200J when mass is 25 kg and velocity is 4 m/s.

Miles Tugo is camping in Glacier Canyon and he makes a loud holler. The sound bounces off the nearest canyon wall (which is located 170 meters away from Miles) and returns to Miles.
Determine the time elapsed between when Miles makes the holler and the echo is heard.

Answers

Answer:

It would take 1 s to hear the echo.

Explanation:

Here, the sound covered a total of 340 meters, since it bounces off the canyon wall and travels back to Miles in the form of echo.

The time elapsed can be determined by,

v = [tex]\frac{2D}{t}[/tex]

⇒ t = [tex]\frac{2D}{v}[/tex]

where: v is the speed of sound in air (343 m/s), D is the distance of the nearest canyon (170 m).

So that,

2D = 2 x 170 = 340 m

Thus,

t = [tex]\frac{340}{343}[/tex]

 = 0.9913 s

t = 1 s

It takes 1s for Miles to hear his echo.

If C is the vector sum of A and B, C = A + B, What must be true if C = A + B?. What must be true if C = 0?.

Answers

A and B are equal vectors

What acceleration would be achieved by a 5N thrust motor in a 0.30kg

Answers

Answer:

F=ma

5N=0.3a

a=5/0.3=16.66m/s²

PLEASE GIVE BRAINLIEST

Answer:

16.7

Explanation:

acceleration=force/mass

When a hot object makes a cold object warmer what is it called

Answers

Its called heat transfers

A car traveled a distance of 30 km in 20 minutes (1/3 hours). What was the
speed of the car?
O A. 90 km/hr
O B. 60 km/hr
O c. 30 km/hr
O D. 10 km/hr

Answers

A is the answer to your question







20 minuets is 1/3 of an hour so you multiply 30 km by 3 and get 90 km/hr
90 or a, becauE 30x20 is how i solved

How do you find component velocities of parallel vectors?

Answers

Answer:

Velocity is a vector (it has magnitude and direction), so the overall velocity of an object can be found with vector addition of the x and y components: v2 = vx2 + vy2. The units to express the horizontal and vertical distances are meters (m).

What is the acceleration of a 24 kg mass pushed by an 8 N force?

Answers

Answer:

0.25 m/s squared

Explanation:

Mass of the body (m)= 24kg

Applied force on the body(F)= 6N

Acceleration of the body (a)= ?

Solution

F = ma

a = F/m

a = 6N/24kg

a = 0.25m/s^2

Answer: The acceleration of the body is 0.25m/s^2

I hope this helps

Answer:

[tex]\boxed {\boxed {\sf a=\frac {1}{3} \ m/s^2}}[/tex]

Explanation:

Force is the product of mass and acceleration.

[tex]F=ma[/tex]

The mass is 24 kilograms and the force is 8 Newtons. Let's convert the Newtons to make the problem easier.

1 Newton is equal to 1 kilogram meter per square second. The force of 8 N equals 8 kg*m/s²

Substitute the known values into the formula.

[tex]8 \ kg*m/s^2= (24 \ kg )*a[/tex]

Since we are solving for a, we must isolate the variable. It is being multiplied and the inverse of multiplication is division. Divide both sides by 24 kilograms.

[tex]\frac {8 \ kg*m/s^2}{24 \ kg}= \frac{(24 \ kg )*a}{24 \ kg}[/tex]

The kilograms will cancel, hence our earlier unit conversion.

[tex]\frac {8 \ m/s^2}{24 }= a[/tex]

[tex]\frac {1}{3} \ m/s^2=a[/tex]

The acceleration is 1/3 meter per square second.

Which statement correctly describes these electric field lines

Answers

Answer:

ok

Explanation:

the correct answer is C please follow me

C is the correct answer : source A is Negatively charged source B is positively charged.

DO NOW: You are picking up a pendulum (Clay ball on a string) as you pull the pendulum up on one side and let it fall, what types of energy are being used?

Answers

Answer:

The energy used in the pendulum is the initial Potential (Mechanical) Energy, P.E. given to the Clay ball attached to the inclined and extended string by virtue of its elevated position in relation to the rest position (lower state)

The swinging of the pendulum is brought about by the dynamic equilibrium between the initial potential energy, P.E. and the Kinetic Energy, K.E., of the pendulum when it is in motion

The (total) Mechanical Energy, M.E. of the ideal pendulum is constant at all times during the motion of the pendulum and it is given by the following formula;

M.E. = P.E. + K.E.

At the top of the swing, P.E. is maximum and K.E. is zero

Similarly, at the mid (lowest) point in the swing, instantaneously, P.E. is zero and K.E. is maximum

Explanation:

When you blow across the top of
a soda bottle, it acts like a closed
pipe. If it creates a fundamental
frequency of 680 Hz, how deep
is the bottle?
(Speed of sound = 343 m/s)
(Unit = m)
Please need help!!!!

Answers

Answer:

the new foundation would be

Explanation:

ok

Why are temperatures of the currents generally colder at the poles than the equator?
A. Tilt of the Earth on its axis
B. Angle of the sun's rays are less direct
C. Angle of the sun's rays are more direct
D. The Earth's revolution around the sun.​

Answers

Answer:

the answer is A

Explanation:

M= 1000 g g= 10 m/s2 h= 10 K.E at GROUND = 400 j M.E = ....... ........J the answer is 400 so plz explain how

Answers

Answer:

M = 500 J

Explanation:

Given that,

Mass, M = 1000 g = 1 kg

Height, h = 10 m

Potential energy is given by :

P = mgh

P = 1×10×10

P = 100 J

The kinetic energy at ground = 400 J

Mechanical energy = sum of kinetic and potential energy

So,

M = 100 + 400

M = 500 J

So, the mechanical energy of the system is 500 J.

One of the solid reactants was treated in a coffee grinder before adding to

the reaction container. *

O

A. Concentration

B. Temperature

C. Surface Area

D. Catalyst

E. Agitation

Answers

Answer:

C. Surface area

Explanation:

The rate of  chemical reaction depends on various factors such as:

concentration and pressurenature of reactantstemperaturesurface areapresence of catalyst, etc.

Effect of surface area of reactants: the rate of a chemical reaction can be increased by increasing the the area of contact of the reacting substances. This is especially important when one or more of the reactants are solids., because only the particles of the solid that are exposed are able to take part in the reaction at each instant of time. Therefore, the greater the surface area of the solid reactant particles the faster the reaction.

The surface area of solid reactants can be increased by grinding or pelletizing, thus allowing for a greater contact between the reacting particles,

The instance in which one of the solid reactants was treated in a coffee grinder before adding to the reaction container is one way of increasing the surface area of a reactant.

Water uptake to the atmosphere occurs through the processes of evaporation and transpiration from plants where it condenses to form clouds. Clouds release the water through precipitation. During a summer of extreme drought, what can we expect to happen to the surface groundwater stored in ponds and lakes?

a. Water levels will increase because there is more precipitation
b. Animals won't drink as much to save water, so water levels remain the same
c. Water levels will increase because there are more evaporation and transpiration
d. Water levels will decrease because there are more evaporation and transpiration

Answers

water level will decrease because there are more evaporation and transpiration

A force of 100N stretches an elastic string to a total length of 20cm. if an additional force of 100N stretches the spring 5 cm further, find the natural length of the spring if the elastic limit is not exceeded. Pls help ASAP​

Answers

Answer:

8cm

Explanation:

The general formula to find this is F/X where in this case the f is the total of the two forces (100+100) and x is the sum of the length ( 20+5) which together comes 200&25respectively then divide 200 with 25 which comes 8cm.

what is specific heat capacity?​

Answers

Specific heat capacity is defined as the amount of heat required to raise the temperature of 1 kilogram of a substance by 1 kelvin (SI unit of specific heat capacity J kg−1 K−1). From: Basic Physics and Measurement in Anaesthesia (Fourth Edition), 1995.

Answer: It is the amount of thermal energy (heat) needed to raise the temperature of 1kg of a substance by 1°C. *It is important to state that it is per kg because of the word "specific". cliffffy4h and 3 more users found this answer helpful.

Which would increase the speed of a sound wave?

Answers

Answer:

I would say temperature

Other Questions
Why do people in the United States vote the way they do?A. Glaciers, slavery, and industrializationB. Wars, migration, glaciers, and industrializationO C. Migration, glaciers, and industrializationD. A wide variety of reasons referred to as multiple causation Help pls ! This is trigonometric function Select the correct answer. Which material is commonly preferred for detailed projects such as connectors, jewelry, or small parts, but cannot be used for bigger prototypes? . paper OB. plasticine clay Oc. silicone mold putty OD. epoxy clay How did the renewed use of the Silk Road affect the Italian economy? Choose four correct answers.More goods and ideas were exchanged.Manufacturing centers were developed.The populations of cities decreased.A new form of government developed.The middle class grew.A system of patronage was created. Why did the United States drop 2 bombs on Japan at the end of WW2 Create a food web diagram for a meadow. Once you have your diagram, categorize the organisms according to which of them are producers, first-order consumers, second-order consumers and third-order consumers. There should be at least 15 organisms in your food web. Work out the percentage change to 2 decimal places when a price of 200 is increased to 210.99. Explain what is pavilion in details How many hours are in 188 years Please help!! PLEASE!!! I NEEDDDD HELP PLEASE Which of the following is the type of notice provided by recording?Select one:a reasonableb. constructivec. protective d. actual Protozoa are a type of unicellular organisms.TrueFalse What integer is closet to n Please HELP!!WILL GIVE BRAAIN!!! Hey can some one help me, Define a variable and write each phrase as an algebraic expression:1. Six feet less than the width2. 6 hours more per week than Theodore studies3. Six years less than Tracy's age4. 2 less than one-third of the points that the panthers scored LEEN was observing the physical properties of elements in order to classify them as either a metal, non-metal, metalloid or any other type of element. The first element was dull, brittle, and did not conduct heat. What would its classification beMetalNon-metalMetalloidRadioactive element Pls help the words are there on the bottem Pls help me Do you think China is rich in natural resources? Explain your answer. Im gonna be gone for a while to get some help (yeahhhh u already know what i mean) so hurs some points :>