5. What is the pH of a solution with p0H= 8.5? Is this an acid, base, or neutral?

Explanation:

21.0 g of potassium reacts with 62.5 g of barium nitride, what mass of potassium nitride will be produced

Answer:

b) The total moles of each element present in the reactants and in the products.

Explanation:

Hello there!

In this case, since the law of conservation of mass is used to realize that the mass, atoms and molecules of all the species involved in a chemical reaction must be the same at both reactants and products, we can see that a and c stand for those that must be equal; thus, we infer that the moles can be different as they stand for the amount of substance which is related to the mass via molar masses. Therefore, the answer would be b) The total moles of each element present in the reactants and in the products.

Regards!

Answer:

This question is a bit vague. We're not told if 500ml is the volume of the solution and additional info is not given to calculate the volume of pbNo3 being added.

If you solve with 500ml as the volume of solution ... You'll have the answer below.

Molarity=moles of solutes/Volume of solvent(in litres)

moles of solute given=1.565moles

Volume = 500ml. There's 1000ml to a litre. Dividing by 1000ml to convert to Litres... You have 0.5L

Molarity = 1.565/0.5

=3.13M

Answer:

1.84

Explanation: just input the value into the formula pv=nrt

p*30=2*0.08206*337 then divide both sides by 30 and  get 1.84

Answer:

i-dk but A seems most logical to me

Explanation:

Answer:

0.4 kg/m^3

Explanation:

v (volume) = 20m x 10m x 5m = 1000 m^3

w (weight) = 400 kg

d (density) = w / v

d = 400 / 1000 = 0.4 kg per cubic meter (kg/m^3)

I apologize if this is a little complex, however all of the math is there, if you're interested then look it over. Otherwise I've provided the answer in the units used for the dimensions and weight provided.

Answer:

The activation energy needed to form cubic diamond is much greater than the activation energy needed to form hexagonal diamond.

Explanation:

The activation energy refers to the minimum energy that reacting species must possess before they can undergo a particular chemical reaction.

This implies that if species do not possess the activation energy, they hardly undergo a given reaction. The activation energy is the barrier between reactants and products.

Hence, a reaction that has a very high activation energy occurs slowly or may not even occur. The activation energy needed to form cubic diamond is much greater than the activation energy needed to form hexagonal diamond hence the synthetic process produces hexagonal diamond and not the more thermodynamically stable cubic diamond.

Answer:

Light is absorbed, which produces characteristic lines.

Lines are dark on a visible light background.

Lines are produced by electrons being excited.

Explanation:

Edg

The characteristics of absorption spectra light is absorbed, which produces characteristic lines, lines are dark on a visible light background and Lines are produced by electrons being excited.

The term "absorption spectroscopy" applies to spectroscopic methods that assess how much radiation interacts with a sample and is absorbed as a proportion of frequency or wavelength. The sample takes in photons, meaning energy, from the emitting field.

The electron would be a subatomic particle with a negative one fundamental charge electric charge. Due to their lack of components or substructure, electrons, which have become part of the lepton particle family's first generation, could be typically regarded to be elementary particles.

The percentage of incoming electromagnetic energy that a material absorbs across a variety of frequencies is displayed in the material's absorption spectrum. In a way, an emission spectrum would be the converse of an absorption spectrum.

To know more about absorption spectrum and electrons

https://brainly.com/question/1255220

#SPJ2

Answer:

Explanation:

your not so smart

Explanation:

I think it is the first option

Answer:

1) They expand to completely fill their container.   :)

Explanation:

Answer:

Option E

Deuterium has one more neutron than hydrogen

Explanation:

Deuterium is an isotope of Hydrogen and hence there will variation in the number of neutron

Hydrogen has 0 neutron

Deuterium has 1 neutron and

Tritium has 2 neutron

Thus option E is correct

In the universe, there are approximately 26 deuterium atoms for every million hydrogen atoms. Deuterium has one more neutron than hydrogen.

The correct option is E.

Deuterium is a stable isotope of hydrogen, whose atomic weight is 2.014.

It is also called heavy hydrogen, and it contains one neutron and one proton.

In nuclear fusion reactors, deuterium is employed as a tracer, while in heavy water moderated fission reactors, it is utilized to slow down neutrons.

Thus, the correct option is E.

Learn more about deuterium

https://brainly.com/question/3845553

Answer:

[tex]HCO^-_3+HBrO\rightleftharpoons H_2CO_3+BrO^-[/tex]

Explanation:

Hello there!

In this case, according to the Brønsted-Lowry theory of acids, it is possible to realize that HBrO acts as the Brønsted-Lowry acid as it has a free hydrogen to give away to HCO₃⁻ which acts as the Brønsted-Lowry base able to accept the incoming hydrogen; therefore, the Brønsted-Lowry reaction is:

[tex]HCO^-_3+HBrO\rightleftharpoons H_2CO_3+BrO^-[/tex]

Best regards!

In the Brønsted-Lowry reaction between HCO⁻₃ and HBrO, the formed acid is H₂CO₃ and the formed base is BrO⁻.

According to Brønsted-Lowry acid-base theory:

Let's consider the following Brønsted-Lowry reaction.

HCO⁻₃ + HBrO ⇄ acid + base

The resulting reaction is:

HCO⁻₃ + HBrO ⇄ H₂CO₃ + BrO⁻

In the Brønsted-Lowry reaction between HCO⁻₃ and HBrO, the formed acid is H₂CO₃ and the formed base is BrO⁻.

Learn more about Brønsted-Lowry acid-base theory here: https://brainly.com/question/7256753

Answer:

78.14% Pb²⁺ and 21.86% of Cd²⁺

Explanation:

The first titration involves the reaction of both Pb²⁺ and Cd²⁺

In the second titration, as the buffer is HCN/NaCN, the Cd²⁺ precipitates as Cd(CN)₂ and the only ion that reacts is Pb²⁺

In the first titration:

Moles EDTA = Moles Pb²⁺ and Cd²⁺:

28.89mL = 0.02889L * (0.06950moles / L) = 2.008x10⁻³ moles in the aliquot. In the sample:

2.008x10⁻³ moles * (250.0mL / 50.0mL) =

0.01004 moles = Pb²⁺ + Cd²⁺ (1)

In the second titration:

19.07mL = 0.01907L * (0.06950mol / L) = 1.325x10⁻³ moles Pb²⁺ in the aliquot. In the sample:

1.325x10⁻³ moles Pb²⁺ * (250.0mL / 50.0mL) =

6.626x10⁻³ moles Pb²⁺

That means the moles of Cd²⁺ are:

0.01004 moles = Cd²⁺ + 6.626x10⁻³ moles Cd²⁺

3.413x10⁻³ moles Cd²⁺

The mass of each ion is:

Cd²⁺ -Molar mass: 112.411g/mol-:

3.413x10⁻³ moles Cd²⁺ * (112.411g / mol) =

0.384g of Cd²⁺

Pb²⁺ -Molar mass: 207.2g/mol-:

6.626x10⁻³ moles Pb²⁺ * (207.2g / mol) =

1.373g of Pb²⁺

The percent mass of each ion is:

1.373g Pb²⁺ / 1.757g = 78.14% Pb²⁺

And:

0.384g of Cd²⁺ / 1.757g * 100 = 21.86% of Cd²⁺

Answer:

40.1 g

Explanation:

The balanced equation is:

First we convert 86.5 g of calcium chlorate into moles, using its molar mass:

Then we convert Ca(ClO₃)₂ moles into O₂ moles, using the stoichiometric coefficients of the balanced reaction:

Finally we convert O₂ moles into grams:

Upon studying the orbit of Uranus more closely, astronomers realized its orbit was being affected by the presence of another very large mass - so the hunt was on for another large planet. He sent his prediction to the Astronomer Royal, Sir George Airy, who passed it on to an 'observer'.

más inteligente o gracias por favor :)) <33 / brainliest or a thank you please :)) <33

The position of Uranus was predicted by determining the position of a larger mass ( Neptune ) exerting a gravitational push on Uranus

Uranus is the 7th planet in the galaxy it was initially  discovered with the aid of a telescope by an astronomer whom initially thought it was a star.

The position of Uranus was predicted when an astronomer ( John Couch Adams ) and his colleague predicted the gravitational effect on Uranus from another larger mass ( Neptune ). they discovered the position of the larger mass affecting the orbit of Uranus and the position of this larger mass ( Neptune ) was used to predict the position of Uranus in the galaxy.

Hence we can conclude that the position of Uranus was predicted by determining the position of a larger mass ( Neptune ) exerting a gravitational push on Uranus

Learn more : https://brainly.com/question/24416144

Answer:

liquid

Explanation:

defiantly

Answer:

Meteoroids

Explanation:

Meteoroids are the elements of the universe that have the smallest diameter among all elements, reaching less than 1 km in diameter. They are any rocky or metallic body, which exists in space and does not reach more than 100 meters. It is common for meteoroids to fall to earth, but their impact is not as destructive as the impact of other space bodies, due to their tiny size.

Answer:

The Coriolis effect

Explanation:

The Coriolis effect is the effect that makes tornados, water spouts, and are often seen in storms. They make water curve and rotate as well as the wind And current.

Answer:

A Li2O

Explanation:

Li has a 1+ charge and O has a 2- charge so to balance the charges there needs to be 2 Li for every 1 O

The product forms from the synthesis reaction between lithium (Li)and oxygen (O) is Li₂O. The correct option is A.

Synthesis reaction is the reaction when two or more products combine to form a single product.

An example of a synthesis reaction is the combination of sodium (Na) and chlorine (Cl) to produce sodium chloride (NaCl).

Thus, the correct option is A. Li2O.

Learn more about synthesis reaction

https://brainly.com/question/24936069

#SPJ2

Answer:

pH = 2.25

Explanation:

pH is a measurement in chemistry defined as the -log [H₃O⁺]. Molarity [], is defined as the ratio between moles of solute (HCl) and the liters of solution

To solve this question we must find the molarity of the H₃O⁺ knowing: [HCl] = [H₃O⁺]

[HCl]:

0.0084moles / 1.500L

= 0.0056M = [HCl] = [H₃O⁺]

pH = -log [H₃O⁺] = -log [0.0056M]

A solution prepared by dissolving 0.0084 moles of HCl in 1500 mL of solution has a molar concentration of HCl of 5.6 × 10⁻³ M, a molar concentration of H₃O⁺ of 5.6 × 10⁻³ M and a pH of 2.3.

A solution is prepared by dissolving 0.0084 moles of HCl in 1500 mL of solution. The molarity of HCl is:

[tex][HCl] = \frac{0.0084mol}{1.5L} = 5.6 \times 10^{-3} M[/tex]

HCl is a strong acid according to the following equation.

HCl(aq) + H₂O(l) ⇒ Cl⁻(aq) + H₃O⁺(aq)

Thus, the concentration of H₃O⁺ will be equal to the initial concentration of HCl, 5.6 × 10⁻³ M.

Finally, we will calculate the pH of the solution using its definition.

[tex]pH = -log [H_3O^{+} ] = -log (5.6 \times 10^{-3} ) = 2.3[/tex]

A solution prepared by dissolving 0.0084 moles of HCl in 1500 mL of solution has a molar concentration of HCl of 5.6 × 10⁻³ M, a molar concentration of H₃O⁺ of 5.6 × 10⁻³ M and a pH of 2.3.

Learn more: https://brainly.com/question/14950262

well i need points

Explanation:

thanks

Since pH + pOH = 14, given a pOH of 4.53, our pH would be 14 - 4.53 = 9.47. And since the pH is greater than 7, this solution is basic. So, the correct answer choice would be D.

Answer:

115.891

Explanation:

Molarity is equal to moles/liters so to get moles we multiply molarity by liters, after this we multiply the moles by the total atomic weight of the compound to get grams

*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆

Answer: True

I hope this helped!

<!> Brainliest is appreciated! <!>

- Zack Slocum

*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆

Answer:

true

Explanation:

Answer:  4 atoms is the answer. I hope it helped you.

Explanation:

Answer:

800 g

Explanation:

We can express the decay of I-37 using the formula:

We input the data:

And solve for Initial Mass:

Meaning that out 800 grams of I-37, only 25 will remain after 40.35 days.