Answer:
If you mean the number of atoms in 8g of oxygen, it's 3.011 x 10^23 atoms.
Explanation:
Convert the grams to moles. 8 grams of oxygen is 0.5 moles. Then multiply the number of moles by Avogadro's number: 6.022 x 10^23.
Help please you don’t need to show work
Answer:
24.07
Explanation:
Classify the following as homogeneous or heterogeneous mixtures, or pure
we
is a pure substance, whether it is an element or a
Mixture: homogeneous/
Substance
heterogeneous
Pure substanca
element companie
2.1 Sugar
2.2 Magnesium ribbon
2.3 Vegetable soup
2.4 Bath oil
2.5
Tin of assorted biscuits
2.6
Peanuts and raisins
2.7 Copper wire
2.8
Bicarbonate of soda
(Baking soda)
Explanation:
Sugar - Pure substance
Magnesium Ribbon - Pure Substance
Vegetable soup Heterogeneous mixture
Bath oil - Homogeneous mixture
Tin of assorted biscuits - Heterogeneous mixture
Peanuts and raisins - Heterogeneous mixture
Copper wire - Pure Substance
Bicarbonate of soda (Baking soda) - Pure Substance
Cars require multiple energy transformations. Gasoline is put in the tank to burn for the car to go. The car battery provides the energy for other functions of the car as well.
Which of the following type of energy is NOT used in a car?
A.Chemical Energy
B.Electrical Energy
C.Kinetic Energy
D.Sound Energy
PS: I Need This Right Now, Please Help You Will Get 10 Points For Answering The Question. Give TRUE HONEST Opinion That YOU Think Is Right. This Is Due Today ( Friday March 5th 2021 ) America’s Date.
The energy is found to has a specific physical meaning. There are different forms of energy on earth. The ability to do the work is defined as the energy. Here chemical energy is not used by the car. The correct option is A.
What is Kinetic energy?The measure of the work an object can do by virtue of its motion is defined as the kinetic energy. To accelerate an object, it is very important to have the kinetic energy. Activities like walking, jumping, and falling involve kinetic energy.
The energy which is stored in the molecules and atoms and is converted to other forms of energy is defined as the chemical energy. The fuel and air are chemical energy which is transformed to mechanical for a race car. Here kinetic energy inside the engine is transformed from chemical energy to mechanical energy.
So electrical energy, kinetic energy and sound energy are used by cars.
Thus the correct option is A.
To know more about Chemical Energy, visit;
https://brainly.com/question/30288262
#SPJ2
A closed gas system initially has pressure and volume of 0.922 atm and 4.64L with the temperature unknown. If the same closed system has values of 1030 torr, 4.36 L, and 837K, what was the initial temperature in K?
Answer:
606.09K
Explanation:
Using the combined gas law equation;
P1V1/T1 = P2V2/T2
Where;
P1 = initial pressure (atm)
P2 = final pressure (atm)
V1 = initial volume (L)
V2 = final volume (L)
T1 = initial temperature (K)
T2 = final temperature (K)
According to the provided information in the question;
P1 = 0.922atm
P2 = 1030torr = 1.355atm
V1 = 4.64L
V2 = 4.36L
T1 = ?
T2 = 837K
Using P1V1/T1 = P2V2/T2
0.922 × 4.64/T1 = 1.355 × 4.36/837
4.278/T1 = 5.9078/837
Cross multiply
5.9078T1 = 837 × 4.278
5.9078T1 = 3580.69
T1 = 3580.69/5.9078
T1 = 606.09K
Which of the following would have three iron atoms in its formula? Iron oxide, iron Ill oxideiron phosphide, or iron phosphide.
Answer:
1 and 4 and 24
Explanation:
I know this because i passed 1st grade
How many protons are in an oxygen atom.
Answer:
Hello
there are 8 protons in oxygen atom
Explanation:
thanks...hope it helps
Why might the seismic waves have traveled faster to one city than the other? A. They were traveling through different types of rocks. B. One city was quieter that the other. C. It is impossible for waves to travel at different speeds. D. One city was smaller than the other.
Answer: A. They were traveling through different types of rocks
Explanation:
For the reaction N2+3H2⇌2NH3, the metals Fe and Mo used as catalyst. which of the following is NOT a reason that catalysts have no effect on the equilibrium state?
A. In the presence of a catalyst, the same amounts of reactants and products will be formed as would form in the uncatalyzed reaction.
B. The addition of a catalyst speeds the rate of both the forward and reverse reactions, resulting in no change to the equilibrium.
C. Catalysts reduce the required activation energy and allow a reaction to reach equilibrium more quickly.
D. Catalysts get used up in the formation of the product.
HELPPPP!!!!
Four students were asked to identify the part of an atom that determines the atom's identity and chemical properties. The student's responses are shown in the chart below. Which of the student's responses is correct?
Answer:
The number of protons is what determines a atoms identity.
This means that student 3 is correct.
Explanation:
Blood is carried to the lungs by the
Answer:
heart
Explanation:
Answer:
arteries carry blood to the lungs
HELP WITH THIS WORD PROBLEMStudents want to gather evidence for the claim that the number of atoms present before a chemical reaction is equal to the number of atoms present after the chemical reaction. They decide to react vinegar and baking soda in a sealed plastic bag. Which of the following would provide the evidence the students need?
The mass of the plastic bag, baking soda, and vinegar before the reaction was equal to the mass after the reaction.
Bubbles were produced during the reaction, which meant that a gas was being produced
.The plastic bag did not change in any way, indicating that it was not involved in the reaction.
The mass of the baking soda was exactly equal to the mass of the vinegar used to create the chemical reaction.
A teacher tells the student to dlaw the same wave with double the frequency, while keeping the amplitude the same. How would the student draw the new wave?
Answer:
A.
Explanation:
Frequency is how often one complete cycle or wave takes place. Amplitude is the height of the wave from the midpoint to the crest.
The new drawing should have twice as many waves in the same period of time, with the same height wave.
Answer:
A.)
Explanation:
Frequency is how often one complete cycle or wave takes place. Amplitude is the height of the wave from the midpoint to the crest.
The new drawing should have twice as many waves in the same period of time, with the same height wave.
please help!! will give brainliest if u tell me how
Why does heat transfer from object to object?
Select one:
a.Heat transfers because of the temperature differences between objects
b.Heat transfers because of the mass difference between objects
c.Heat does not transfer between objects
d.Heat is energy so it moves
2 NH3(g) → N2(g) + 3 H2(g)
What type of reaction is shown above?
A)
single replacement
B)
decomposition
C)
double replacement
D)
synthesis
Answer:
Decomposition Reaction
Explanation:
In the provided reaction, we can see that Ammonia is getting decomposed into Nitrogen and Hydrogen gas.
Another way to think about it is that Decomposition is nothing but one thing giving rise to 2 or more than 2 things.
Since our Ammonia is giving rise to 2 gases, this reaction is an example of Decomposition reaction
Calculate the change in heat (Q) that occurs when 7.58grams of steam at 101°C cools to liquid water at 40°C. (cp = 4.184 J/g°C)
Answer:
Q = 19065.4 J
Explanation:
Q₁ = the required energy for phase change of H₂O from vapor to liquid
Q₁ = mass of H₂O * heat of vaporization
Q₁ = 7.58 g * 2260 J/g
Q₁ = 17130.8 J
Q₂ = energy required to cool the water fro 101°C to 40°C
Q₂ = mass of H₂O * specific heat of H₂O * ΔT
Q₂ = 7.58 × (4.184 J/gC) × (101 - 40)
Q₂ = 1934.6 J
Q = Q₁ + Q₂
Q = (17130.8 + 1934.6) J
Q = 19065.4 J
Is the fractional distillation of liquefied air a physical or chemical change?
Answer:
Physical Chanhe is the answer : )
Step 7: Measure Pressure and Volume with the Book
and 2 kg of Weight
Total the mass on the syringe. Record it in the
correct row of the data table.
kg
Answer:
1) 2.498
2) 1.27
3) A) 40.5
4) 51.4
Explanation:
Answer: 2.498
Explanation:
I’m taking it rn and got it wrong so y’all could get it right
In a warehouse, the workers sometimes slide boxes along the floor to move them. Two boxes were sliding toward each other and crashed. The crash caused both boxes to change speed. Based on the information in the diagram, which statement is correct? In your answer, explain what the forces were like and why the boxes changed speed.
Box 1 has more mass than Box 2.
Box 1 and Box 2 are the same mass.
Box 1 has less mass than Box 2.
Answer:
Box 1 and Box 2 are the same mass.
Explanation:
Because they both change speed due to having the same mass!
Hope this helps! :) BRAINLIEST PLZ
- Wind and water sometimes carry
topsoil from one place to another. A
word that describes this process is?
A Substratum
B> Flow
Erosion
D Decay
Answer:
erosion is the right answer
The calorimeter pictured below shows the final temperature after calcium chloride was added to water. (The initial temperature was 25°C.) Which of the following best describes what occurred within the calorimeter?
A. Only Bond forming occurred
B. The bonds that formed were the most part stronger than the bonds that were broken
C. More energy was absorbed in breaking bonds than was released when new bonds form
D. As the powder dissolved, the breaking of bonds released energy
Answer:
The answer is acctualy B
Explanation:
I did the gizmo
The calorimeter has the final temperature rise with the addition of calcium chloride as formation of bonds stronger than the bonds that are broken. Thus option B is correct.
There has been increased in the temperature as the breaking of bonds has released energy in the solution. With the high energy in the solution, the part of the energy has been used for the bond formation. However the rise results as the bonds formed are stronger than the bonds broken.
The calorimeter has the final temperature of [tex]\rm 52^\circ C[/tex]. The addition of calcium chloride results in a rise in temperature. This has resulted in the formation of bonds stronger than the bonds that are broken. Thus option B is correct.
For more information about the calorimeter, refer to the link:
https://brainly.com/question/10987564
We need a 3.0M aqueous HCl solution to dissolve the middle of a penny which is made of nickel. What mass of HCl is contained in 2.40 L of a 3.0M solution?
Answer:
262.8 g
Explanation:
Molarity = 3.0M
Mass = ?
Volume = 2.40L
The relationship between these quantities is given as;
Molarity = Number of moles / Volume
Number of moles = Molarity * Volume
Number of moles = 3 * 2.4 = 7.2 mol
Mass = Number of moles * Molar mass
Molar mass of HCl = 1 + 35.5 = 36.5 g/mol
Mass = 7.2 * 36.5 = 262.8 g
Answer:
262.44 grams of HCl is contained in 2.40 L of a 3.0 M solution.
Explanation:
Molarity (M) or Molar Concentration is the number of moles of solute that are dissolved in a certain volume.
Molarity is calculated as the number of moles divided by the volume of the solution:
[tex]Molarity=\frac{number of moles of solute}{volume of solution}[/tex]
Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].
In this case:
Molarity= 3 MNumber of moles of solute= ?Volume of solution= 2.4 LReplacing:
[tex]3 M=\frac{number of moles of solute}{2.40 L}[/tex]
and solving you get:
number of moles of solute= 3 M* 2.40 L
number of moles of solute= 7.2 moles
Being the molar mass of HCl 36.45 g/mole, then you can apply the following rule of three: if 1 mole has 36.45 grams, 7.2 moles how much mass does it have?
[tex]mass of HCl=\frac{7.2 moles*36.45 grams}{1 mole}[/tex]
mass of HCl= 262.44 grams
262.44 grams of HCl is contained in 2.40 L of a 3.0 M solution.
How many atoms in this molecule have a tetrahedral molecular geometry?
In the given molecular geometry, two atoms (C and O) have a tetrahedral molecular geometry.
What is tetrahedral geometry?The tetrahedral geometry is formed when there are four bonds all on one central atom. According to the VSEPR theory, the bond angles between the bonds are 109.5°.
Methane has tetrahedral geometry and the four equivalent bonds in 3 D corresponding to the four corners of a tetrahedron centered on the carbon atom.
In the given molecule, the carbon is attached to three hydrogens and one carbon atom with bond angles of 109.5° have a tetrahedral geometry and shape.
The oxygen atom is attached to two carbon atoms with bond angles of approximately 104.5° and contains two lone pairs. The oxygen atom has a tetrahedral molecular geometry. The oxygen atom is of the form AX₂E₂ and has bent shapes similar to the shape of water.
Learn more about tetrahedral geometry, here:
https://brainly.com/question/22081359
#SPJ2
Two atoms (C and O) in the specified molecular geometry have a tetrahedral molecular geometry.
When four bonds are present on the same core atom, the tetrahedral geometry is created. The bond angles between the bonds are 109.5° in accordance with the VSEPR hypothesis.
The four analogous bonds in three dimensions that make up methane correspond to the four corners of a tetrahedron that is centred on the carbon atom. Methane has a tetrahedral shape.
One carbon atom with a bond angle of 109.5° and a tetrahedral geometry makes up the carbon in the given molecule, which is joined to three hydrogen atoms.
Thus, with bond angles of roughly 104.5° and two lone pairs, the oxygen atom is joined to two carbon atoms. Tetrahedral molecular geometry characterises the oxygen atom.
For more details regarding molecular geometry, visit:
https://brainly.com/question/31984103
#SPJ6
Calculate the molarity of a solution containing 21.9g of MgCl, in enough water to
make a 750.mL solution.
80g of Sodium react with 40g of Chloride to produce a product of Sodium Chloride. How many grams of sodium chloride will be present after this chemical reaction?
Na2 + 2Cl2 —> 2NaCl2
Students in Ms.Tillman’s class added 100 grams of copper to 15 grams of oxygen. A chemical reaction occurred produced copper oxide, as shown in the equation below
2 Cu + ___O2 —> 2 CuO
What type of reaction is this?
How many total grams should be present at the end of the chemical reaction?
A student wants to carry out flame tests on these three chemicals. Describe how to carry out a flame test.
Answer:
Flame test is one of the chemical tests that can be used to identify a metal or metaloid
in an ionic compound.
Explanation:
Flame test is guided by a principle that when an unknown metal is heated, heat of the flame converts the metal ions into atoms which become excited and emit visible light.
To carry out flame test in a laboratory the following instruments are required:
--> a wire loop
--> Bunsen burner
--> the chemical compound under observation
--> protective wears.
The procedure involves the following steps:
--> turn on the Bunsen burner and adjust the barrel of the burner roll the flame is blue.
--> using a clean wire loop deep into a beaker containing hydrochloric acid.
--> to ensure that the loop is clean, it will give the same blue colour of the flame when heated.
--> deep the loop in the acid again and then use it to pick few grains of the metal.
--> place the wire loop in the side of the flame and observe the colour of the flame.
Result of flame tests of some metallic ion will show the following:
--> sodium ion will give yellow colour flame
--> potassium ion will give lilac colour flame
--> calcium ion will give orange-red colour flame
What is the volume in liters of 3.80 moles of CO2gas at STP?
Answer:
V = 85.2
Explanation:
STP = 273K and 1 atm
Considering what we know about STP, we get the moles, temperature, and pressure. Using the ideal gas law we can find the volume (PV = nRT). Plug in our variables: (1 * V = 3.80 * R * 273). Since we are dealing with atm and not kPA or mmHg, we use the constant for atm (0.0821) which we use for R. (So.. now our equation is 1 * V = 3.80 * 0.0821 * 273). We now multiply the right side to get 85.17054. So... V = 85.2 considering sigificant figures (this is the part where I am the least sure of, since I havent done sig figs in a while)
answer pls ill give brainly
How is energy from the sun used as food energy by organisms in an ecosystem?
Energy from the sun is absorbed as heat by consumers.
Energy from the sun is absorbed by fungi, and it is then passed on to consumers.
Energy from the sun is converted into food energy by producers, which is then passed on to consumers.
Energy from the sun is converted into food by consumers, which is then passed on to producers.
Answer:
its absorbed by heat from consumers
the reaction 2F2+ 2H2O + 4HF + 02 find the number of moles of oxygen produced from 10 moles of fluorine
Answer:
20 moles of Oxygen
Explanation:
2F2 + 2H20 -> 4HF + O2
We have 10 moles of fluorine. Based on the reaction equation, we see that:
n O2 = 2 * n F2 (n is the number of moles)
=> n O2 = 2 * 10 = 20 (moles)
Because of this, the number of moles of oxygen is 20 moles.
Which choice represents a compound?Required to answer. Single choice.
(1.5 Points)
Cu
Fe
CO
Br
Answer:
CO
Explanation:
Elements will only one capital letter, that may/may not have a lower case letter after it. CO has a capital letter followed by another capital, so it's a compound
Help please
what is the half-life of c-14 at 250g?
Answer:
5,730 years
hope im right
Explanation:
Its half-life is 5,730 years. How much of a 250g sample of carbon-14 will be left in 5,000 years?