7. a high-frequency photon is scattered off of an electron andexperiences a change of wavelength of 1.7 x 10-4 nm at whatangle must a detector be placed to detect the scattered photon(relative to the direction of the incoming photon)?

When you comb your hair on a dry day, the friction between your hair and the comb can lead to the transfer of electrons from one material to another.

Electrons are negatively charged particles that are present in all materials.

The material that loses electrons becomes positively charged, as it has lost negatively charged particles.

In this case, the comb is likely to become positively charged as it loses electrons to your hair during the combing process.

The material that gains electrons becomes negatively charged, as it has gained negatively charged particles.

In this case, your hair is likely to gain electrons from the comb during the combing process, making it negatively charged.

However, whether or not your hair remains neutral depends on the balance of electrons that are transferred during the process.

If the transfer of electrons is balanced, such that the comb loses an equal number of electrons to the hair and the hair gains an equal number of electrons from the comb, then the hair will remain neutral.

If the transfer of electrons is unbalanced, and the hair gains more electrons than the comb loses, then the hair will become negatively charged.

In practice, it is difficult to achieve a perfectly balanced transfer of electrons, so it is possible that your hair may become slightly negatively charged when you comb it on a dry day.

However, the charge imbalance is likely to be very small and may not be noticeable.

Overall, the process of combing your hair on a dry day can lead to the transfer of electrons between the comb and your hair, resulting in the comb becoming positively charged and your hair becoming slightly negatively charged.

However, whether or not your hair remains neutral depends on the balance of electrons that are transferred during the process.

To know more about friction visit link :

https://brainly.com/question/28356847

#SPJ11

To find the distance at which the centripetal acceleration of an orbiting space station around a planet is equal to Earth's gravitational acceleration, we need to set up an equation involving the planet's mass (M), gravitational constant (G), and Earth's gravitational acceleration (g).

Given:
M = 8.00 × 10²³ kg
G = 6.67 × 10^(-11) m³·kg^(-1)·s^(-1)
g = 9.81 m/s² (Earth's gravitational acceleration)

Centripetal acceleration (a_c) is given by the formula:

a_c = (G * M) / r²

where r is the distance from the planet's center.

We want the centripetal acceleration to be equal to Earth's gravitational acceleration, so we can set them equal:

g = (G * M) / r²

Now, we need to solve for r:

r² = (G * M) / g

r² = (6.67 × 10^(-11) m³·kg^(-1)·s^(-1) * 8.00 × 10²³ kg) / 9.81 m/s²

r² ≈ 5.42 × 10¹² m²

Now, take the square root of both sides to find r:

r ≈ 2.33 × 10^6 m

So, at a distance of 2.33 x 10^6 meters from the planet's center, the centripetal acceleration of an orbiting space station will be equal to the gravitational acceleration on Earth's surface.

To learn more about Centripetal Acceleration and Gravitational Acceleration. Please Visit:

https://brainly.com/question/26143683

#SPJ11

The following formula can be used to determine the distance from the planet's centre at which the centripetal acceleration of an orbiting space station equals the gravitational acceleration on Earth's surface:

[tex]r = (GM/g)^(1/3)[/tex]

where the gravitational constant, G, equals 6.67 1011 m3 kg-1 s-1.

M is equal to 8.00 1023 kg (the planet's mass).

Gravitational acceleration on Earth's surface is equal to 9.81 m/s2.

When we change the values, we obtain:

[tex]r = [(6.67 × 10^-11) × (8.00 × 10^23) / 9.81]^(1/3)[/tex]

[tex]r = 2.33 × 10^6 m[/tex]

Therefore, 2.33 x 106 m is the necessary distance.

F = G (m1m2 / r2), where G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between them, can be used to express the gravitational force between two objects. When a planet and a satellite are involved, the centripetal force that holds the satellite in orbit around the planet is produced by the gravitational force. As a result, we may compare the centripetal force to gravity and find r. This results in the formula above, which we can use to calculate the necessary distance.

learn more about gravitational acceleration here:

https://brainly.com/question/30429836

#SPJ11

A) The magnitude force required to give a helicopter of mass M an acceleration of 0.10 g upward is F = 0.981 M N.

B) The work done by the force as the helicopter moves a distance h upward is W = 0.981 Mh N.

A) The force required to give a helicopter of mass M an acceleration of 0.10 g upward can be calculated using Newton's Second Law of Motion, which states that the force applied to an object is equal to the object's mass multiplied by its acceleration. The acceleration given is 0.10g, which can be converted to meters per second squared (m/s²) as follows:

0.10 g = 0.10 × 9.81 m/s² = 0.981 m/s²

Thus, the force required can be calculated as:

F = M × a

F = M × 0.981 N

B) To calculate the work done by the force as the helicopter moves a distance h upward, we can use the formula for work done by a constant force, which is:

W = F × d × cos(θ)

where W is the work done, F is the force applied, d is the displacement, and θ is the angle between the force and the displacement vectors. In this case, the displacement is upward and the force is also upward, so θ = 0 and cos(θ) = 1.

The work done by the force as the helicopter moves a distance h upward is:

W = F × h × cos(θ)

W = F × h

Substituting the value of F from Part A, we get:

W = 0.981 M N × h

To learn more about force the link:

https://brainly.com/question/26115859

#SPJ4

The complete question is:

A) What magnitude force is required to give a helicopter of mass M an acceleration of 0.10 g upward? Express your answer in terms of the variable M and appropriate constants.

B) What work is done by this force as the helicopter moves a distance h upward? Express your answer in terms of the variables M,h, and appropriate constants.

A spaceship is traveling at 0.7c when a laser beam is turned on, directed in the direction the ship is traveling.

According to the theory of relativity, the speed of light in a vacuum is always the same for all observers, regardless of their relative velocities.

The speed of the laser light is always c, which is the speed of light in a vacuum, approximately 3.0 x 10^8 meters per second. This is because the speed of light is constant and does not depend on the speed of the source (in this case, the spaceship).

Explanation:

In this scenario, the spaceship is traveling at 0.7c, which means that it is moving at a speed that is 0.7 times the speed of light. When a laser beam is turned on in the direction of the spaceship's motion, the speed of the laser light is still c, as measured by an observer on the spaceship. This is because the speed of light is always the same, regardless of the motion of the source or observer.

To learn more about Theory of relativity. Please Visit:

https://brainly.com/question/14212639

#SPJ11

A laser beam is activated and pointed in the direction of a spaceship that is moving at 0.7c.

The speed of light in a vacuum is constant for all observers, regardless of their relative velocities, according to the theory of relativity.

The speed of the laser light is always c, or around 3.0 x 108 metres per second, the speed of light in a vacuum. This is due to the fact that the speed of light is independent of the source's (in this example, the spacecraft's) speed and is always constant.

In this scenario, the spaceship is traveling at 0.7c, which means that it is moving at a speed that is 0.7 times the speed of light. When a laser beam is turned on in the direction of the spaceship's motion, the speed of the laser light is still c, as measured by an observer on the spaceship. This is because the speed of light is always the same, regardless of the motion of the source or observer.

learn more about theory of relativity here:

https://brainly.com/question/14212639

#SPJ4

In order for a vehicle travelling at 18.0 m/s to negotiate  highway bend without sliding, curve must be banked (inclined). The radius of curve approximately 33.1 metres.

The coefficient of side friction is found to be 0.10, and the superelevation at one horizontal curve has been set at 6.0%.the formula for calculating a road curve's radiusFind the shortest curve radius necessary to ensure safe vehicle operation.

speed of the car v = 18.0 m/s

angle of banking of the curve θ = 37°

acceleration due to gravityg = 9.81 m/s²

radius of the curve = r

N = mg * cos(θ).........1

also

N = mv² / r...........2

from equation 1 and 2 we get

mg * cos(θ) = mv² / r

r = v² / (g * cos(θ))

r = (18.0 m/s)² / (9.81 m/s² * cos(37°)) ≈ 33.1 m

Therefore, radius of the curve is approximately 33.1 meters.

To know more about  radius of the curve  visit:-

https://brainly.com/question/12868546

#SPJ1

The right response is resting tremor (option b). A patient may have spasticity, autonomic dysreflexia, and orthostatic hypotension following a spinal cord injury (SCI). SCI is not often linked to resting tremor.

SCI can interfere with the body's ability to communicate with the brain, leading to a variety of physical symptoms. Spasticity, which manifests as stiffness, muscle spasms, and increased muscle tone, is a frequent consequence. Patients with SCI at or above the T6 level may develop autonomic dysreflexia, a potentially fatal illness that is characterised by an abrupt rise in blood pressure. When someone stands up, their blood pressure drops, causing lightheadedness and dizziness. This condition is known as orthostatic hypotension.

While essential tremor, Parkinson's disease, and other neurological illnesses are frequently linked to resting tremor, SCI is not typically one of them.

learn more about  autonomic dysreflexia here:

https://brainly.com/question/30331093

#SPJ11

The right response is resting tremor (option b). A patient may have spasticity, autonomic dysreflexia, and orthostatic hypotension following a spinal cord injury (SCI). SCI is not often linked to resting tremor.

SCI can interfere with the body's ability to communicate with the brain, leading to a variety of physical symptoms. Spasticity, which manifests as stiffness, muscle spasms, and increased muscle tone, is a frequent consequence. Patients with SCI at or above the T6 level may develop autonomic dysreflexia, a potentially fatal illness that is characterised by an abrupt rise in blood pressure. When someone stands up, their blood pressure drops, causing lightheadedness and dizziness. This condition is known as orthostatic hypotension.

While essential tremor, Parkinson's disease, and other neurological illnesses are frequently linked to resting tremor, SCI is not typically one of them.

learn more about  autonomic dysreflexia here:

brainly.com/question/30331093

#SPJ4

Answer:

falling iirc

Explanation:

You can safely hold your fingers on both sides of a candle flame due mainly to convection.

Convection is the process by which heat is transferred through the movement of fluids or gases, such as air. In this case, the heated air around the candle flame rises upwards, which means the heat is not directly transferred to your fingers when they are on both sides of the flame. Therefore we can correctly say that you can safely hold your fingers on both sides of a candle flame mainly due to convection.

More on convection: https://brainly.com/question/19446911

#SPJ11

The melting of methane hydrates on the seafloor can lead to a sharp rise in global temperatures because methane is a powerful greenhouse gas. The statement is true.

Methane is a powerful greenhouse gas, with a global warming potential that is estimated to be about 25 times greater than that of carbon dioxide over a 100-year time horizon. Methane hydrates are solid, crystalline compounds that contain a large amount of methane gas trapped within water molecules. These hydrates are stable under certain temperature and pressure conditions, but if they become destabilized, they can release large amounts of methane into the atmosphere.

The melting of methane hydrates on the seafloor is a concern because it has the potential to release vast amounts of methane into the atmosphere, which could significantly contribute to global warming and climate change. This process could be triggered by rising ocean temperatures, changes in ocean currents, or other factors that alter the stability of the hydrates. While the exact extent and impact of this phenomenon are still uncertain, it is an area of active research and concern among climate scientists.

To learn more about temperature, refer:-

https://brainly.com/question/2662380

#SPJ11

The coils in the spring will move farther apart when a current is passed through it because of the solenoid effect.

The solenoid effect describes the way a loose spiral spring expands when a current is fed through it. An electric current flows through a coil of wire to create a solenoid, a type of electromagnet. A magnetic field is produced when current passes through the coil, and the magnetic field lines are parallel to the axis of the coil. The amount of current flowing through the coil and the number of wire turns within the coil determines how strong the magnetic field is.

Because a loose spiral spring behaves like a coil of wire, the solenoid effect is seen in this situation. The magnetic field that is created around a spring when a current is sent through it has lines that are parallel to the spring's axis. The interaction between the magnetic field and the spring's current produces a force that pushes the coils apart.

To learn more about solenoids, refer to:

https://brainly.com/question/4340558

#SPJ4

The correct option is option a) "When the electric field due to one is a maximum, the electric field due to the other is also a maximum, and this relation is maintained as time passes.".

When we say that two light rays striking a screen are in phase with each other, we mean that their electric fields are synchronized, and the electric field due to one is a maximum when the electric field due to the other is also a maximum, and this relation is maintained as time passes.

This synchronization occurs because they have the same wavelength and are traveling at the same speed.

As a result, they alternately reinforce and cancel each other, creating a pattern of light and dark bands on the screen. Therefore, the correct answer is a) when the electric field due to one is a maximum, the electric field due to the other is also a maximum, and this relation is maintained as time passes.

Learn more about electric field:

https://brainly.com/question/19878202

#SPJ11

The nonconservative work done on the surfer is 2845.5 J.

We can use the work-energy theorem to solve this problem. The work-energy theorem states that the net work done on an object is equal to its change in kinetic energy. In this case, we can calculate the initial and final kinetic energies of the surfer and find the difference, which will give us the net work done.

The initial kinetic energy of the surfer is:

[tex]K_i = (1/2) * m * v_i^2[/tex]

[tex]K_i = (1/2) * 73.2 kg * (1.44 m/s)^2[/tex]

K_i = 75.7 J

The final kinetic energy of the surfer is:

[tex]K_f = (1/2) * m * v_f^2[/tex]

[tex]K_f = (1/2) * 73.2 kg * (8.89 m/s)^2[/tex]

K_f = 2921.2 J

The change in kinetic energy is:

ΔK = K_f - K_i

ΔK = 2921.2 J - 75.7 J

ΔK = 2845.5 J

According to the work-energy theorem, this change in kinetic energy must be equal to the net work done on the surfer. Therefore, the nonconservative work done on the surfer is:

W_nc = ΔK

W_nc = 2845.5 J

So, the nonconservative work done on the surfer is 2845.5 J.

Learn more about   nonconservative work

https://brainly.com/question/28588859

#SPJ4

Answer:

P (momentum) = M * V

V = (2.95^2 + 3.97^2)^1/2 = 4.95 m/s

P = 2.99 kg * 4.95 m/s = 14.8 kg-m/sec      total momentum

tan θ = Vy / Vx = -3.97 / 2.95 = -1.35

θ = 53.4 deg below positive x-axis

The equivalent gradient updates as momentum 0.9 with batch size B = 32 in the simplified SGD update equation.

The relationship between momentum and batch size in the simplified version of SGD update is that increasing the batch size leads to a decrease in the effective learning rate, which in turn requires an increase in momentum to maintain the same level of stability.

If we train a model with momentum and a batch size of B, and now have a GPU with more memory and can use a batch size of B', we should increase the momentum by a factor of sqrt(B/B') to maintain the same level of stability.

To find the equivalent momentum for the simplified SGD update equation, we can use the formula:

momentum' = momentum * sqrt(B/B')

For example, if we initially trained with momentum = 0.9 and batch size B = 32, and now have a GPU with enough memory to use batch size B' = 64, we would calculate:

momentum' = 0.9 * sqrt(32/64) = 0.9 * 0.7071 = 0.64 (rounded to two decimal digits)

Therefore, using a momentum of 0.64 with batch size B' = 64 would lead to equivalent gradient updates as momentum 0.9 with batch size B = 32 in the simplified SGD update equation.

Learn more about SGD

brainly.com/question/30244812

#SPJ11

The standing wave's fundamental frequency is the frequency of the first harmonic, which has one node and two antinodes, whereas the number of nodes determines the standing wave's harmonic number.

A 4.35 metre long, 137 gramme wire is being pulled at 125 newtons of force. With seven nodes total, including the endpoints, a standing wave has developed.

A collection of dots and dashes can be used to represent the wave pattern. The relationship between wave speed and wavelength is used to compute the standing wave's frequency. The tension in the wire and its linear mass density are used to calculate the wave speed.

The standing wave's fundamental frequency is the frequency of the first harmonic, which has one node and two antinodes, whereas the number of nodes determines the standing wave's harmonic number.

Learn more about standing wave:

https://brainly.com/question/30114344

#SPJ4

The magnetic field inside the coil is 0.036 T.

As the area of the coil increases, the magnetic field strength increases, and as the length of the wire increases, the magnetic field strength decreases. Understanding the factors that affect the magnetic field inside a coil is important in designing and optimizing various devices that use electromagnetic fields, such as transformers, motors, and generators. The magnetic field inside a coil can be calculated using the formula:

B = (μ₀ * n * I * A) / L

where,

μ₀ = permeability of free space = 4π x 10^-7 T m/A

n = number of turns

I = current in amperes

A = area of the coil in square meters

L = length of the coil in meters

Substituting the given values,

B = (4π x 10^-7 T m/A * 636 turns * 0.487 A * (2.12 x 10^-2 m)^2) / (2.12 x 10^-2 m)

B = 0.036 T (Tesla)

To know more about magnetic field, here

brainly.com/question/14848188

#SPJ4

The law of conservation of energy states that energy is neither created nor destroyed but is transformed from one form to another.

The law of conservation of energy is the law that states that energy is neither created nor destroyed but is transformed from one form to another.

Examples of activities of everyday life that shows the conservation of energy include the following:

Learn more about energy here:

https://brainly.com/question/25959744

#SPJ1

An example of the law of conservation of energy is a roller coaster.

The law of conservation of energy states that energy cannot be created or destroyed, only transferred or transformed from one form to another. This means that the total amount of energy in a closed system remains constant over time.

A roller coaster car gains kinetic energy as it moves down the track, but it also loses potential energy. At the bottom of the track, the car has the most kinetic energy and the least potential energy, while at the top of the track, it has the most potential energy and the least kinetic energy. However, the total amount of energy in the system remains constant.

Learn about law of conservation of energy here https://brainly.com/question/166559

#SPJ1

The result is ,(a)  Z = sqrt((10^2) + (15^2)) = 18.03 ohms.
                    (b) the apparent power would be S = (120 V) x (1 A) = 120 VA.

To find the apparent power (total volt-amps) of a series circuit with a 10 ohm resistor and 15 ohms of inductive reactance in a single inductor, we first need to calculate the impedance of the circuit.

Impedance is the total opposition to current flow in an AC circuit and is a combination of resistance and reactance. In this case, we can use the formula Z = sqrt(R^2 + XL^2), where R is the resistance and XL is the inductive reactance.

To find the apparent power (S) of the circuit, we use the formula S = Vrms x Irms, where Vrms is the root mean square voltage and Irms is the root mean square current. Since we are not given any values for voltage or current, we cannot find the exact value of apparent power.

However, we can make some assumptions based on typical values for household circuits. For example, if the voltage is 120 volts (typical in the US) and the current is 1 amp,

To learn more about : power

https://brainly.com/question/1634438

#SPJ11

The energy stored in the magnetic field in a cube of 12.7 light-years on edge is approximately 1.1 x 10⁷ joules.

The energy stored in a magnetic field can be calculated using the formula:

E = (1/2) × B² × V

where E is the energy, B is the magnitude of the magnetic field, and V is the volume of the region in which the field exists.

Given that the magnetic field in the interstellar space of our galaxy has a magnitude of 1.13 × 10⁻¹⁰ T and the volume of a cube of 12.7 light-years on edge, we can calculate the energy stored in this magnetic field as follows:

V = (12.7 ly)³

= (12.7 x 9.461 x 10¹⁵ m)³

= 1.39 x 10⁴⁹ m³

E = (1/2) × (1.13 × 10⁻¹⁰ T)² × 1.39 x 10⁴⁹ m³

E = 1.1 x 10³⁷ joules

Therefore, the energy stored in the magnetic field in a cube of 12.7 light-years on edge is approximately 1.1 x 10⁷ joules.

To learn more about joules the link:

https://brainly.com/question/25982371

#SPJ4

The complete question is:

The magnetic field in the interstellar space of our galaxy has a magnitude of about 1.13 × 10⁻¹⁰ T. How much energy is stored in this field in a cube 12.7 light? years on edge? (For scale, note that the nearest star is 4.3 light? years distant and the radius of the galaxy is about 8 × 10⁴ light? years.)

The space station's, which has a ringed compartment is rotating with initial velocity 0.10rad/s and angular acceleration of 0.01rad/s², angular velocity after 960 seconds is 9.7 rad/s.

To find the space station's angular velocity after 960 seconds, we can use the following equation that relates initial angular velocity, angular acceleration, and time:

Final angular velocity (ωf) = Initial angular velocity (ωi) + (angular acceleration × time)

Given:
Initial angular velocity (ωi) = 0.10 rad/s
Angular acceleration = 0.01 rad/s²
Time = 960 seconds

Now, we can plug these values into the equation:

ωf = 0.10 rad/s + (0.01 rad/s² × 960 s)

ωf = 0.10 rad/s + (9.6 rad/s)

ωf = 9.7 rad/s

So, the space station's angular velocity after 960 seconds is 9.7 rad/s.

More on angular velocity: https://brainly.com/question/13934235

#SPJ11

Answer:

The answer is Continental Grip

The range of capacitance needed for the capacitor to be 99.3% charged within 10 ms of turning the voltage source on is greater than or equal to 56.3 times the resistance in ohms.

To calculate the range of capacitance needed for the capacitor to be 99.3% charged within 10 ms of turning the voltage source on in an RC circuit, we can use the following formula:

Vc(t) = Vmax * (1 - e^(-t/RC))

where Vc(t) is the voltage across the capacitor at time t, Vmax is the maximum voltage of the source, e is the mathematical constant approximately equal to 2.718, R is the resistance in ohms, C is the capacitance in farads, and t is the time in seconds.

When the capacitor is 99.3% charged, the voltage across it is 0.993 * Vmax. Substituting this value into the formula and solving for C, we get:

C >= t / (R * ln(1 / (1 - 0.993)))

C >= 10 ms / (R * ln(1 / 0.007))

C >= 56.3 * R

Therefore, the range of capacitance needed for the capacitor to be 99.3% charged within 10 ms of turning the voltage source on is greater than or equal to 56.3 times the resistance in ohms.

Know more about  RC circuit   here:

https://brainly.com/question/2741777

#SPJ11

The calorimeter has tap water in it, but it actually contains salt water (which has a lower specific heat than tap water, then the student may make an error in their calorimetry calculation.

Calorimetry is the science of measuring the heat of chemical reactions or physical changes, and the study of the relationship between heat, temperature, and energy. It is used to measure the amount of heat energy released or absorbed in a chemical or physical change, and to calculate the enthalpy change of a reaction.

Reaction is a process that results in the transformation of one or more substances into different substances. Chemical reactions involve the breaking and formation of chemical bonds between atoms, ions, or molecules, and can be accompanied by the release or absorption of energy in the form of heat, light, or electricity.

To know  more about calorimetry visit :

https://brainly.com/question/11477213

#SPJ1

Evaporation is a cooling process because more energetic molecules escape the liquid, carrying away heat through radiation. Answer: "None of the above".

The release of more energising molecules from the liquid during evaporation causes cooling. The heat energy that these molecules bring with them when they go lowers the liquid's temperature. Not conduction or convection, but heat radiation throughout the operation is mostly to blame for this cooling impact.

Therefore, "none of the above" is the appropriate response. In general, the energy needed to break the intermolecular bonds in the liquid, which lowers the temperature overall, is responsible for the cooling impact of evaporation.

Learn more about Evaporation:

https://brainly.com/question/25310095

#SPJ4

The angular velocity of the coil is approximately 7.27 rad/s.

The formula for the maximum emf induced in a rotating coil is given by: emf = NABw, where N is the number of turns in the coil, A is the area of the coil, B is the strength of the magnetic field, and w is the angular velocity of the coil.

Solving for w, we get: w = emf/(NAB)

Substituting the given values, we get: w = (28.0 x 10^-3)/(16 x 16 x 16 x 0.060 x 2π) ≈ 7.27 rad/s.

Therefore, the angular velocity of the coil is approximately 7.27 rad/s.

To know more about rotating coil, here

brainly.com/question/29820416

#SPJ4

Answer:

The type of collision, whether elastic or inelastic, can be determined by observing the behavior of the colliding objects before and after the collision. Here are some key characteristics that can help identify whether a collision is elastic or inelastic:

Conservation of Kinetic Energy: In an elastic collision, kinetic energy is conserved, while in an inelastic collision, some of the kinetic energy may be converted into other forms of energy.

Objects' Motion After Collision: In an elastic collision, objects bounce off each other and move independently, while in an inelastic collision, objects may stick together, deform, or move as a single mass.

Restitution Coefficient: In an elastic collision, the restitution coefficient is close to 1, indicating high bounce-back, while in an inelastic collision, the restitution coefficient is less than 1, indicating less bounce-back.

Conservation of Momentum: In both elastic and inelastic collisions, momentum is conserved, but the change in velocity of the objects after the collision can indicate whether the collision is elastic or inelastic.

The stability of the nucleus is maintained through the combined effects of the strong force and neutrons.

Although protons repel each other due to their positive charge, they are stable in a nucleus because of the strong force, which is a fundamental force that binds the particles together.

The strong force is the strongest force in nature and overcomes the electromagnetic force that causes the protons to repel each other. Neutrons, which have no charge, also play a significant role in stabilizing the nucleus.

The neutrons act as a buffer between the positively charged protons, separating them from each other and reducing the electrostatic repulsion. Electrons, which have a negative charge, are not involved in stabilizing the nucleus as they are located outside the nucleus in orbitals around the nucleus.

To learn more about : neutrons

https://brainly.com/question/12706684

#SPJ11

The net torque required to accelerate is 28496 Nm.

The net torque required to accelerate a uniform disk of radius 7.5 m and mass 29000 kg from rest to 0.63 rad/s in 27 s is needed.

The problem is asking for the net torque required to accelerate a merry-go-round from rest to a final angular velocity of 0.63 rad/s in 27 seconds. The merry-go-round is assumed to be a uniform disk, which means that its mass is evenly distributed across its entire radius. We are also given the radius of the merry-go-round (7.5 m) and its mass (29000 kg).

To solve the problem, we can use the formula:

[tex]τ = Iα[/tex]

where τ is the net torque applied to the merry-go-round, I is its moment of inertia, and α is its angular acceleration. Since the merry-go-round is initially at rest, its initial angular velocity is zero. Using the formula for angular acceleration, we can find that:

[tex]α = Δω/Δt = (0.63 rad/s - 0 rad/s) / 27 s = 0.0233 rad/s^2[/tex]

To find the moment of inertia of the merry-go-round, we can use the formula for the moment of inertia of a uniform disk:

[tex]I = (1/2)mr^2[/tex]

where m is the mass of the disk and r is its radius. Substituting the given values, we get:

[tex]I = (1/2)(29000 kg)(7.5 m)^2 = 1220625 kg m^2[/tex]

Finally, we can use the formula [tex]τ = Iα[/tex] to find the net torque required to accelerate the merry-go-round:

[tex]τ = (1220625 kg m^2)(0.0233 rad/s^2) = 28496 Nm[/tex]

Therefore, the net torque required to accelerate the merry-go-round is 28496 Nm.

Learn more about torque

brainly.com/question/25708791

#SPJ11

Answer: hope it helps

Explanation:

A protostar becomes a main sequence star when its core temperature exceeds 10 million K. This is the temperature needed for hydrogen fusion to operate efficiently.