the atomic number of magnsium is 12 this means that that its nucleus must contain
Explanation:
Since magnesium has an atomic number of 12, that means that it has 12 protons and 12 electrons when it is in normal state.
Answer:
12 protons
Explanation:
What is the difference between melting and burning a substance? Is mass conserved in either process?
Answer:
Explanation:
First Question:
Melting is a physical process that involves the phase transition of a substance from its solid to its liquid state. Burning, on the other hand, is a chemical process that involves a substance being broken down and changed into different substances. It's still the same substance, though: water.
Second Question:
Mass is therefore never conserved because a little of it turns into energy (or a little energy turns into mass) in every reaction. But mass+energy is always conserved. Energy cannot be created out of anything.
what are two factors that affect the boiling point of water
Answer:
purity and pressure affects boiling point
The table compares vapor pressure values for water ethanol and diethyl ether Add six temperatures determine the approximate normal boiling point for each substance what do the data suggest about the relative strength of attraction between particles in each substance
Water has the strongest intermolecular forces followed by ethanol and diethyl ether has the least intermolecular forces.
From the table, we can see the vapor pressures of water, ethanol and diethyl ether. The boiling point of water is 100°C, the boiling point of ethanol is 80°C while the boiling point of diethyl ether is 40°C.
We can see that the vapor pressures and approximate normal boiling points of the substances varies with the nature of intermolecular bond forces in the molecule.
Water has highest boiling point and the lowest vapor pressure followed by ethanol. Diethyl ether has the highest vapor pressure and lowest boiling point from the data in the table.
Learn more: https://brainly.com/question/8646601
Finding dead insects or mouse droppings in the kitchen indicates which of the following: Pest infestation Chemical contamination Food spoilage Cross contamination
Finding dead insects or mouse droppings in the kitchen is an indication of pest infestation.
Pests are living organisms that are capable of spreading diseases, causing economic damages, or generally constituting nuisance to the environment.
Pest infestation occurs when there is a high number of pests in the environment. When this occurs, their activities are felt in the environment in terms of causing a nuisance, and damaging properties or contaminating foods.
More on pest infestation can be found here: https://brainly.com/question/13483095
plzz help me cant remember the parts of the flower.
A is the petal and b is the leaf. I think.
Write a five-sentence paragraph describing the nature and background of basketball.
Answer:
The history of basketball began with its invention in 1891 in Springfield, Massachusetts by Canadian physical education instructor James Naismith as a less injury-prone sport than football. Naismith was a 31-year old graduate student when he created the indoor sport to keep athletes indoors during the winters.
Explanation:
The history of basketball began with its invention in 1891 in Springfield, Massachusetts by Canadian physical education instructor James Naismith as a less injury-prone sport than football. Naismith was a 31-year old graduate student when he created the indoor sport to keep athletes indoors during the winters.
A 1.8 mole sample of a compound weighs 195 g and is found to be 11.18% H and 88.82% C. What is the molecular formula for the compound?
Answer:
C8H12
Explanation:
First find the molar mass
195/1.8 × 1 = 108.3 gmol-1
Then the molecular formula
Mass of C in 1 mole of compound = 88.82×108.3/100
= 96.2 g
Mass of H in 1 mol of.the compound = 108.3×11.18/100 = 12.11 g
Divide the mass by their molar masses to get no. of moles in 108.3 g of compound or 1 mole of compound
Moles of C in one Mole of compound = 96.2g/12 gmol-1 = 8 mol
Moles of H in 1 mole of compound = 12.11g/1 gmol-1 =12 mol
Since we need the molecular formula it's C8H12
Help with this please :) will mark Brainlyist if right
Answer:
3
Explanation:
Which of the following subject areas contains questions that can be answered by science?
O Astronomy
O Alchemy
O Ethics
O Religion
Answer:
A
Explanation:
K took the test
Astronomy subject areas contains questions that can be answered by science. Thus option A is correct.
What is Astronomy?The science deals with extraterrestrial objects and phenomena, that is everything in our universe beyond the atmosphere of our planet.
This science is more observational than experimental. Astronomy can be up two types such as observational astronomy and theoretical astronomy.
Now a day, the field of astronomy has been expanded enormously in different field of subjects like astrometry, planetary astronomy, astrophysics, astrobiology, astrochemistry, etc.
The field of astrophysics is used understand the nature of celestial objects and their physical processes involve in the formation and emission of radiation.
Other research application include the chemical composition of stars, study of nuclear reactions to know the details about the the radiation energy release from stars.
Thus, Option A is correct.
Learn more about astronomy, here:
https://brainly.com/question/13050965
#SPJ2
How are elements in the same family in the periodic table alike?
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
The Correct choice is ~ C
They have the same number of electron shells~
Explanation:
option C is correct.....
how many moles of s atoms are in 1 mol of CaSO4
I think u asked for the atoms of sulfur? its 4..
Explanation:
calcium = 4
sulfur = 4
oxygen = 4
I hope this is correct
375cm³ of a gas has a pressure of 770 mm Hg, find it Volume if the pressure is reduced to 750 mm Hg
Answer:
Explanation:
Givens
v1 = 375 cm^3
P1 = 770 mm Hg
V2 = ?
P2 = 750 mm Hg
Formula
V1 P1 = V2 P2
Solution
375 * 770 = V2 * 750 Combine the left
288750 = V2 * 750 Divide both sides by 750
288750/750 = V2
V2 = 385
Balance the equation
Ca(s) + H3PO4(aq) ---->Ca3(PO4)2(s) + H2(g)
The weight of a piece of a cubic foot wood is 40lbs. It is thrown into a pool of
water. What is the weight of the water displaced?
Answer:
Volume of wood = 1 ft3 Mass of wood (m) = 40 lbs = 18.1437 kg Let the volume of water displaced be V. Density of water (ρ
Explanation:
Certain __________ metals like gold are found as pure metals rather than ores in the earth. Complete the sentence.
Answer:
nonreactive
Explanation:
hello guyz who ever answers will get 100 pts
Answer:
hello,
Good morning have a good day
(20 points) In the morning, you decide to make toasted bacon, lettuce, and tomato sandwich. Observe what happens in each stage of making the sandwich. Which parts involve only chemical changes happening?
I. The first thing you do is cut two slices of bread.
II. Then you put the slices in the toaster to cook. When the toaster is done, it pops the III. warm brown toast. You cook the bacon in a frying pan you put bacon, lettuce, and tomato on the bread, trimming the sides.
IV. You can smell the old bread in the garbage going moldy.
Steps I and II
Steps II and III
Steps II and IV
Steps III and IV
Answer:
C is the answer I did it and got it right
Hydrocarbons (alkanes, alkenes, alkynes) have all the properties below except one.
Which is not a property of hydrocarbons?
A.nonpolar
B.high melting and boiling points
C.insoluble in water
D.flammable
Answer:
B
Explanation:
The answer is B. All hydrocarbons are nonpolar, they are insoluble in water and they are highly flammable. Now, not all hydrocarbons have high boiling and melting point. For example, methane (CH4) has a boiling point of something clode to -161°C, and that is low. The boiling point increases when the number of carbon atoms in a compound increases, and based on methane and this theory, not all hydrocarbond have a high boiling point. This makes option B be the correct answer.
Calculate the freezing point of a solution of 3.46 g of a compound, X, in 160 g of benzene. When a separate sample of X was vaporised, its density was found to be 3.27 g/Lat 116°C and 773 torr. The freezing point of pure benzene is 5.45°C, and Kis 5.12°C kg/mol.
Answer:
Calculate the freezing point of a solution of 3.46 g of a compound,X,in 160 g of benzene. When separate sample of X was vaporised, its density was found 3.27 g/L at 116 c and 773 torr. The freezing point of pure benzen is 5.45 c, and kf is 5 .12 c/m.
Explanation:
First determine molar mass from
P*molar mass = density*R*T
Solve for molar mass. Then
moles = grams/molar mass
Solve for moles
molality = moles/kg solvent
Solve for molality
delta T = Kf*m
Solve for delta T, then convert to freezing point
Calculate the number of carbon dioxide (CO2) molecules produced in the
reaction if 0.7525 moles of oxygen gas (O2) are consumed.
Answer:
4.530 X 10^23 MOLECULES OF CO2
Explanation:
Calculate the number of carbon dioxide (CO2) molecules produced in the
reaction if 0.7525 moles of oxygen gas (O2) are consumed
so
C + O2-----------CO2
1 MOLE OF 02 produces 1 mole of CO2
so
0.7525 moles O2 produce 0.7525 moles
1 mole is 6.02 X 10^23
so
0.7525 moles is 0.7525 X 6.02 X 10^23 -
=
4.530 X 10^23 MOLECULES OF CO2
Pa help po asap now na po
A very long tube with a cross-sectional area of 1.00 cm2 is filled with mercury to a height of 76.0 cm. At what height would water stand in this tube if it were filled with a mass of water equal to that of the mercury? (The density of mercury is 13.60 g/cm3 and the density of water is 1.00 g/cm3.)
The water would stand at a height of 1033.6 cm
If the mass of the mercury, m equals the mass of the water, m' at its height,h', then the weight of the mercury W equals the weight of the water, W'
So, W = W'
mg = m'g
ρV = ρ'V' where ρ = density of mercury = 13.60 g/cm³, V = volume of mercury = Ah where A = cross-sectional area of tube = 1.00 cm and h = height of mercury = 76.0 cm, ρ' = density of water = 1.00 g/cm³, V = volume of water = Ah' where A = cross-sectional area of tube = 1.00 cm and h' = height of water.
So, ρV = ρ'V'
ρAh = ρ'Ah'
h' = ρAh/ρ'A
h' = ρh/ρ'
Substituting the values of the variables into the equation, we have
h' = ρh/ρ'
h' = 13.60 g/cm³ × 76.0 cm/1.00 g/cm³
h' = 13.60 × 76.0 cm
h' = 1033.6 cm
So, the water would stand at a height of 1033.6 cm
Learn more about water height here:
https://brainly.com/question/15415820
How much Ba(OH)2, in grams, is needed to make a 1.00m aqueous solution?
Answer:
We can say that we need 171 g barium hydroxide needed to make one model equals solution.
Explanation:
I hope this answered your question.
What type of mixture is this illustration?
Answer:
Suspension
Explanation:
It's a suspension because it is not mixed at all, and has distinctly separate layers.
Hey! Help please :)
Answer:
6. 15 oxygen atoms (The coefficient 5 is multiplied by the subscript 3 of oxygen)
7. The number "2" is the subscript.
Why is the speed of sound more in solids than in gases ?......
Explanation:
Sound travels fastest through solids. This is because molecules in a solid medium are much closer together than those in a liquid or gas, allowing sound waves to travel more quickly through it. In fact, sound waves travel over 17 times faster through steel than through air.
Sound waves move faster in solids where the particles are compacted than in gases where the molecules are far apart from each other.
We know that the particles in a solid are held together by strong intermolecular forces while the particles in a gas are not held together by intermolecular forces.Since sound waves are transmitted as vibrations, sound waves move faster in solids where the particles are compacted than in gases where the molecules are far apart from each other.Hence, sound moves faster in a solid than in gases.
Learn more about speed of sound: https://brainly.com/question/15381147
outlines four uses of fat and oil
Fats and oils are used throughout the world for both food applications and industrial uses. They are consumed in butter, shortening, margarine, salad oils, and cooking oils, as well as in animal feeds, fatty acids, soaps, personal care products, biodiesel, paints (made from alkyd resins), lubricants, and greases.
13500 mL convert to milliliters of mercury
Answer:
5.627 × 1019 milliliters
Explanation:
is this what you wanted?
Compare the average motion of the particles in the 3 containers of water
Answer:
c>b=a
Explanation:
It is important to note that mass does not affect the average motion/energy per molecule, but temperature does. the higher the temperature the faster the particles are. A has the same temperature as B, so they have the same amount of motion. C is warmer than A and B, so the average motion of the particles in beaker C is the largest