8
6
15
B
10
Volume =
Surface Area =

The linear programming problem is solved using the simplex method by constructing the simplex tableau, performing pivot operations, and obtaining the optimal solution. The optimal values of the decision variables are X1 = 11, X2 = 3, and X3 = 0, and the optimal objective function value is Z = 29. The other variables X4, X5, and X6 are equal to 0.

What is a linear constraint?

Linear constraint refers to a set of mathematical equations or inequalities that restrict the feasible region of a linear programming problem to a polyhedron, which is a bounded convex region in the n-dimensional space defined by the values of the decision variables.

The objective is to optimize a linear objective function subject to these linear constraints, subject to non-negativity constraints on the decision variables.

a) Write out the full set of linear constraints including the surplus variables:
x1 + 4x2 + 2x3 + x4 = 28
3x1 + 6x2 + x3 + x5 = 36
2x1 + x2 + 5x3 + x6 = 20
x1, x2, x3, x4, x5, x6 ≥ 0
Note: Assume that the third constraint was actually meant to be "2x1 + x2 + 5x3 + x6 ≤ 20" since the original inequality was not specified.

b) Write the problem in standard form:
Minimize Z = 2x1 + 3x2 + 2x3 + 0x4 + 0x5 + 0x6
Subject to:
x1 + 4x2 + 2x3 + x4 = 28
3x1 + 6x2 + x3 + x5 = 36
2x1 + x2 + 5x3 + x6 ≤ 20
x1, x2, x3, x4, x5, x6 ≥ 0

c) Write the problem in matrix form:
Minimize Z = [2 3 2 0 0 0] [x1 x2 x3 x4 x5 x6]T
Subject to:
[1 4 2 1 0 0] [x1 x2 x3 x4 x5 x6]T = 28
[3 6 1 0 1 0] [x1 x2 x3 x4 x5 x6]T = 36
[2 1 5 0 0 1] [x1 x2 x3 x4 x5 x6]T ≤ 20
[x1 x2 x3 x4 x5 x6]T ≥ 0

d) Write out the initial simplex tableau:
Basic      x1      x2      x3      x4      x5      x6      RHS
Z          2       3       2       0       0       0       0
x4         1       4       2       1       0       0       28
x5         3       6       1       0       1       0       36
x6         2       1       5       0       0       1       20

Note: The initial tableau has the identity matrix as the coefficient matrix for the slack and surplus variables, and the objective coefficients are in the top row. The RHS column contains the right-hand side values of the constraints.

To know more about surplus variables visit:

https://brainly.com/question/31343353

#SPJ11

The dot product of two vectors u and v is calculated by multiplying their corresponding components and then adding the products together.

Mathematically, it can be expressed as:  u · v = u₁v₁ + u₂v₂ + u₃v₃ (for vectors in 3D space)
Step:1. u = (2,5) and v = (-6,1)
u · v = (2)(-6) + (5)(1) = -12 + 5 = -7
Since the dot product is not equal to zero, u and v are not orthogonal.
Step:2. u = 2i +3j and v= -7i -3j
u · v = (2)(-7) + (3)(-3) = -14 - 9 = -23
Again, the dot product is not zero, so u and v are not orthogonal.
Step:4. u = 4i+6j+8k and v= 7i -9j+ 12k (3D space)
u · v = (4)(7) + (6)(-9) + (8)(12) = 28 - 54 + 96 = 70
Once again, the dot product is not zero, so u and v are not orthogonal.
Therefore, in all three cases, the dot product of the given vectors is not zero, which means that they are not orthogonal.

Learn more about dot product here, https://brainly.com/question/30404163

#SPJ11

The only equilibrium of the replicator equation is the neutrally stable equilibrium at x1 = x2 = x3 = 1/3.

The replicator equation is a dynamical system that models the evolution of a population of players in a game based on their payoffs. For a two-player game with payoffs given by the matrix R, the replicator equation for the frequency-dependent selection is given by:

dx/dt = x(Rx - x'R x)

where x is a vector of population frequencies, and x'R x is the average payoff of the population.

For the given payoff matrix:

1 1 3

2 1 3

2 -1 0

The replicator equation is given by:

dx1/dt = x1(1x1 + 2x2 + 2x3 - x1 - x2)

dx2/dt = x2(1x1 + 1x2 - 1x3 - x1 - x2)

dx3/dt = x3(3x1 + 3x2 + 0x3 - 2x1 - 3x2)

To find the equilibria of the replicator equation, we need to solve for dx/dt = 0. One possible equilibrium is when all players play the same strategy, i.e., x1 = x2 = x3 = 1/3. To check if this is a stable equilibrium, we need to compute the Jacobian matrix of the replicator equation evaluated at this equilibrium:

J = [2/3 -1/3 -1/3;

-1/3 2/3 -1/3;

1/3 -1/3 0 ]

The eigenvalues of this matrix are λ1 = 1, λ2 = 1/3, and λ3 = -1/3, which means that the equilibrium is neutrally stable (i.e., stable in some directions and unstable in others).

Another possible equilibrium is when x1 = 1 and x2 = x3 = 0 (i.e., all players play the first strategy). To check if this is a stable equilibrium, we need to evaluate the replicator equation at this point:

dx1/dt = 0

dx2/dt = x2(1 - x1 - x2)

dx3/dt = x3(3 - 2x1 - 3x2)

From the second equation, we see that x2 = 0 or x1 + x2 = 1. If x2 = 0, then x1 = 1 and dx3/dt = 3x3 > 0, which means that the equilibrium is unstable. If x1 + x2 = 1, then x1 = 1 - x2 and dx3/dt = 3x3 - 2x1 > 0 for x2 < 3/5, which means that the equilibrium is also unstable in this case.

Therefore, the only equilibrium of the replicator equation is the neutrally stable equilibrium at x1 = x2 = x3 = 1/3. This means that there is no dominant strategy in this game, and the population frequencies of the strategies will oscillate around the equilibrium in the long run.

To learn more about equilibrium visit:

https://brainly.com/question/13458865

#SPJ11

The fifth class is [35.4 - 65.5], the midpoint is 50.45, and the class width is 30.1.

The answer that matches these values is (b) [101.6 – 125.7], 113.65 and 24.1.

To find the class boundaries, we need to find the range of the data and divide it into equal class intervals. We can use the formula:

Class width = (maximum value - minimum value) / number of classes

In this case, we have 8 data points, so let's choose 4 classes. The minimum value is 5.3 and the maximum value is 125.7, so the range is 120.4. The class width is:

Class width = 120.4 / 4 = 30.1

To find the class boundaries, we start with the minimum value and add the class width successively. The class boundaries are:

Class 1: 5.3 - 35.4

Class 2: 35.4 - 65.5

Class 3: 65.5 - 95.6

Class 4: 95.6 - 125.7

To find the midpoint of the fifth class, we need to find the midpoint of the fourth class and add the class width. The midpoint of the fourth class is:

Midpoint of class 4 = (95.6 + 125.7) / 2 = 110.65

Adding the class width, we get:

Midpoint of class 5 = 110.65 + 30.1 = 140.75

Now, we need to determine which class contains the fifth data point, which is 30.3. We can see that it falls in the second class, which has boundaries of 35.4 - 65.5. The midpoint of this class is:

Midpoint of class 2 = (35.4 + 65.5) / 2 = 50.45

To find the logarithm base 8 of this midpoint, we can use the formula:

log8(x) = log10(x) / log10(8)

log8(50.45) = log10(50.45) / log10(8) = 1.6845 / 0.9031 = 1.8642 (rounded to four decimal places)

Therefore, the fifth class is [35.4 - 65.5], the midpoint is 50.45, and the class width is 30.1.

The answer that matches these values is (b) [101.6 – 125.7], 113.65 and 24.1.

To learn more about boundaries visit:

https://brainly.com/question/30116417

#SPJ11

Step-by-step explanation:

6(3h - 4) = 18h + (-24) = 18h -24

(a) When the ball leaves the child's hand, x = 0, so we can substitute this into the equation:
y = -1/16(0)^2 + 2(0) + 5
y = 5
Therefore, the ball is 5 feet high when it leaves the child's hand.

(b) To find the maximum height of the ball, we need to determine the vertex of the parabola. The x-coordinate of the vertex is given by:
x = -b/2a
where a = -1/16 and b = 2. Substituting these values:
x = -2/(2(-1/16))
x = 16
To find the y-coordinate, we substitute x = 16 into the equation:
y = -1/16(16)^2 + 2(16) + 5
y = 21
Therefore, the maximum height of the ball is 21 feet.

(c) To find how far from the child the ball strikes the ground, we need to determine the value of x when y = 0. Substituting y = 0 into the equation:
0 = -1/16x^2 + 2x + 5
Multiplying both sides by -16 to eliminate the fraction:
0 = x^2 - 32x - 80
We can solve for x using the quadratic formula:
x = (32 ± sqrt(32^2 - 4(1)(-80))) / 2(1)
x = (32 ± sqrt(1472)) / 2
x = 16 ± 8sqrt(2)
Since the ball cannot land behind the child, we take the positive value:
x = 16 + 8sqrt(2)
Therefore, the ball strikes the ground approximately 29.1 feet from the child.

To learn more about parabola : brainly.com/question/29075153

#SPJ11

The radius of the circle with tangent length of 12 cm is equal to √122 cm

The tangent to a circle theorem states that a line is tangent to a circle if and only if the line is perpendicular to the radius drawn to the point of tangency

The radius of the circle will form a right triangle with the tangent length 12 cm and the length 16 cm, thus the length of the radius can be derived using the Pythagoras rule as follows:

(16 cm)² = (12 cm)² + r² {r = radius}

r = √(16² - 12²) cm

r = √(256 - 144) cm

r = √112 cm.

Therefore, the radius of the circle with tangent length of 12 cm is equal to √122 cm

Read more about tangent to a circle here:https://brainly.com/question/11067500

#SPJ1

The value of r² + s² is 17.25 if r and s represents the solution of the given quadratic equation 2x² + 9x + 3 = 0.

To find the sum of squares of the solutions of the given quadratic equation, we can use the formula

r² + s² = (r + s)² - 2rs

where r and s are the roots of the quadratic equation.

In this case, we have the equation

2x² + 9x + 3 = 0

We can use the quadratic formula to find the roots:

x = (-b ± √(b² - 4ac)) / 2a

where a = 2, b = 9, and c = 3.

Plugging in these values, we get

x = (-9 ± √(9² - 4(2)(3))) / 4

Simplifying

x = (-9 ± √69) / 4

So the roots are

r = (-9 + √69) / 4

s = (-9 - √69) / 4

To find r² + s², we need to compute (r + s)² - 2rs

(r + s)² - 2rs = ((-9 + √69)/4 + (-9 - √69)/4)² - 2((-9 + √69)/4)((-9 - √69)/4)

Simplifying

= ((-18)/4)² - 2((-9 + √69)/4)((-9 - √69)/4)

= (9/2)² - 2((81 - 69)/16)

= 81/4 - 3/2

= 69/4

= 17.25

Hence, the sum of squares of the solutions of the given quadratic equation 2x² + 9x + 3 = 0 is 17.25.

To know more about quadratic equation here

https://brainly.com/question/30098550

#SPJ1

(a) Let X be the length of a cylindrical metal bar. Then, X ~ N(11, 0.25^2), meaning X is normally distributed with mean 11 cm and standard deviation 0.25 cm. To find P(X > 10.5), the probability that a randomly selected cylindrical metal bar has a length longer than 10.5 cm.

To solve this, we can standardize X using the z-score formula:

z = (X - μ) / σ

where μ = 11 (mean) and σ = 0.25 (standard deviation).

So, we have:

z = (10.5 - 11) / 0.25 = -2

Now, we can find the probability using a standard normal distribution table or calculator:

P(X > 10.5) = P(Z > -2) ≈ 0.9772

(b) To find this value, we can use a standard normal distribution table or calculator. First, we need to find the z-score corresponding to the 86th percentile:

P(Z > z) = 0.14

P(Z < z) = 1 - 0.14 = 0.86

Using a standard normal distribution table or calculator, we find that z ≈ 1.08.

Now, we can use the z-score formula to find K:

z = (K - μ) / σ

1.08 = (K - 11) / 0.25

K - 11 = 1.08 * 0.25

K ≈ 11.27

Therefore, the value of K such that there is a 14% chance that a randomly selected cylindrical metal bar has a length longer than K is approximately 11.27 cm.

(c) Mean = $100 + ($80/cm x 11 cm) = $980
Median = $100 + ($80/cm x 11 cm) = $980
Standard deviation = $80/cm x 0.25 cm = $20
Variance = ($80/cm x 0.25 cm)^2 = $400
86th percentile = mean + (1.08 x standard deviation) = $980 + ($20 x 1.08) = $1002.40

(d) The production cost of a cylindrical metal bar has a mean of $980 and a standard deviation of $20. The cost has a variance of $400 and the 86th percentile of the cost distribution is $1002.40.

(e) (II) a lower level than 0.25 cm.

To learn more about Mean & Standard Deviation : https://brainly.com/question/25829061

#SPJ11

The answer to your question contains a number cube and various events as follows:

(a) Event "A and B": To find the outcomes for this event, we need to identify the numbers that are both odd and less than 4. The outcomes are 1 and 3.

(b) Event "A or B": To find the outcomes for this event, we need to identify the numbers that are either odd or less than 4. The outcomes are 1, 2, 3, and 5.

(c) The complement of Event B: To find the complement of Event B, we need to identify the numbers that are not less than 4. The outcomes are 4, 5, and 6.

Learn more about Event: https://brainly.com/question/25839839

#SPJ11

The number of possible outcomes for each game is 3 (win, lose, or tie). Since there are 2 games left, the total number of possible outcomes is 3 x 3 = 9. Therefore, none of the given answers (a, b, or c) is correct. The correct answer is d.

To determine the number of possible outcomes for your favorite football team's remaining 2 games, we'll consider each game independently. Each game can have 3 possible outcomes: win, lose, or tie. For 2 games, you can use the multiplication principle:

Number of possible outcomes = Outcomes for Game 1 × Outcomes for Game 2

So, the number of possible outcomes is:

3 (win, lose, or tie in Game 1) × 3 (win, lose, or tie in Game 2) = 9

Since 9 is not among the given options, the correct answer is:

d. None of the other answers is correct.

To learn more about possible outcomes, click here:

brainly.com/question/27292589

#SPJ11

The correct statement regarding R-squared is: "Its value is always between -1.0 and 1.0. A value of 1.0 indicates the line is a perfect fit for the data."

R-squared (²) is a statistical measure that represents the proportion of variance in the dependent variable that is explained by the independent variable(s) in a regression model. The value of R-squared ranges from -1.0 to 1.0.

A value of 1.0 indicates that the regression line perfectly fits the data, while a value of 0 indicates that the model cannot explain any variance in the dependent variable. A negative value indicates that the model is worse than just using the mean of the dependent variable.

Therefore, the best fit line for the data is the one that has an R-squared value closest to 1.0, indicating that it explains a high percentage of the variance in the dependent variable based on the independent variable(s). It is important to note that an R-squared value above 1.0 is not possible and may indicate a mistake in the calculations.

For more questions like Regression click the link below:

https://brainly.com/question/28178214

#SPJ11

The volume of the prism given in the image above is calculated as: 700 cubic meters.

The prism is a trapezoidal prism, therefore the formula to use to find the volume is given as:

Volume (V) = (Base Area) × Length of prism

Base area of the prism = 1/2 * (a + b) * h

a = 10 m

b = 25 m

h = 5 m

Base area = 1/2 * (10 + 25) * 5

Base area = 87.5 m²

Length of the prism = 8 m

Therefore, we have:

Volume of the prism (V) = 87.5 * 8 = 700 cubic meters.

Learn more about volume of prism on:

https://brainly.com/question/29663752

#SPJ1

When you add opposite numbers, the sum is 0. Then the correct option is A.

A number line refers to a straight line in mathematics that has numbers arranged at regular intervals or portions along its width. A number line is often shown horizontally and can be postponed in any direction.

Let if 'a' lie on the number axis. Then the opposite of the number 'a' will be '-a'. Then the addition of the numbers is calculated as,

⇒ a + (-a)

⇒ a - a

⇒ 0  

When you add opposite numbers, the sum is 0. Then the correct option is A.

More about the number line link is given below.

https://brainly.com/question/13189025

#SPJ1

Answer:

Step-by-step explanation:

Let's start with the wording of the question. Since the sphere is tangential to the faces of the cube, if we draw our radius perpendicular (forming a right angle with the face), we can see it makes a direct connection to the cube face. This means that the diameter of the sphere is equal to the length of the cube.

Next, the question is asking for the volume outside the sphere and inside the cube. To find this, we need to take the volume of the sphere and subtract it from the volume of the cube.

The volume of a sphere is given as: 4/3*pi*(r)^3

The volume of a cube (or any rectangle) is given as: l*w*h

Now all that's left is to plug in the radius and sides of the cube (which we know is double the radius) and subtract.

(6)*(6)*(6)  -  4/3*pi*(3)^3

216 - 113.1 = 102.9

The question asks for standard units, but we aren't given any units so I'm a bit unclear about this. Either way, volumes are measured in cubics (m^3, ft^3, etc.) so it would be the unit of the radius cubed.

Hope I could help!

The volume contained outside the sphere and inside the cube is 216 - 36π cubic units, which is approximately 99.425 cubic units when rounded to three decimal places.

To find the volume contained outside the sphere and inside the cube, we need to calculate the volume of the cube and subtract the volume of the sphere.

The cube's side length is equal to twice the radius of the inscribed sphere. Therefore, the cube's side length is 2 * 3 = 6 units.

The volume of a cube is calculated by raising the side length to the power of 3. So, the volume of the cube is [tex]6^3 = 216[/tex] cubic units.

The volume of a sphere is given by the formula where r is the radius. Substituting the value, we have [tex](4/3) * π * 3^3 = (4/3) * π * 27[/tex]= 36π cubic units.

Now, to find the volume contained outside the sphere and inside the cube, we subtract the volume of the sphere from the  [tex](4/3) * π * r^3[/tex],volume of the cube: 216 - 36π.

To know more about cube's side length, refer here:

https://brainly.com/question/28088232

#SPJ11

Answer:

There are 10 cards in the stack, and 5 of them are odd (1, 3, 5, 7, and 9). There are 3 cards (1, 2, and 3) that are less than 4. Since we are replacing the first card before selecting the second, the outcomes are independent and we can multiply the probabilities of each event.

The probability of selecting an odd card on the first draw is 5/10, or 1/2.

The probability of selecting a card less than 4 on the second draw is 3/10, since there are 3 cards that meet this condition out of a total of 10.

Therefore, the probability of selecting an odd card on the first draw and a card less than 4 on the second draw is:

(1/2) x (3/10) = 3/20

So the probability of selecting an odd card on the first draw and a card less than 4 on the second draw is 3/20.

Step-by-step explanation:

Answer:

3/20.

Step-by-step explanation:

To find the probability of two independent events happening together, we multiply their individual probabilities. The probability of the first card being an odd number is 5/10, because there are 5 odd numbers out of 10 cards. The probability of the second card being less than 4 is 3/10, because there are 3 cards (1, 2, and 3) that are less than 4 out of 10 cards. Therefore, the probability of the first card being an odd number and the second card being less than 4 is:

5/10 x 3/10 = 15/100

We can simplify this fraction by dividing both the numerator and denominator by 5:

15/100 = 3/20

So, the final answer is 3/20.

Received message. To find the probability of two independent events happening together, we multiply their individual probabilities. The probability of the first card being an odd number is 5/10, because there are 5 odd numbers out of 10 cards. The probability of the second card being less than 4 is 3/10, because there are 3 cards (1, 2, and 3) that are less than 4 out of 10 cards. Therefore, the probability of the first card being an odd number and the second card being less than 4 is: 5/10 x 3/10 = 15/100 We can simplify this fraction by dividing both the numerator and denominator by 5: 15/100 = 3/20 So, the final answer is 3/20.

There is 95% confident that the true difference in proportions of people who identify as a "dog person" in the city and rural areas is between -0.3008 and -0.0260

To find the 95% confidence interval for the difference in proportions of people who identify as a "dog person" in the city and rural areas, we can use the formula:

[tex](p1 - p2)± \frac{zα}{2} \sqrt{\frac{p1(1-p1)}{n1} } + \frac{p2(1-p2)}{n2}[/tex]

where:

p1 is the proportion of people in the city sample who identify as a "dog person"

p2 is the proportion of people in the rural sample who identify as a "dog person"

n1 is the size of the city sample

n2 is the size of the rural sample

[tex]\frac{za}{2}[/tex] is the critical value from the standard normal distribution for a 95% confidence level (which is 1.96)

Plugging in the values given in the problem, we get:

[tex]p1 = \frac{75}{231} = 0.3247[/tex]

[tex]p2 = \frac{51}{113} = 0.4513[/tex]

n1 = 231

n2 = 113

[tex]\frac{za}{2} = 1.96[/tex]

So the confidence interval for the difference in proportions is:

[tex](0.3247 - 0.4513)±1.96 \sqrt{0.3247(\frac{1-0.3247}{231} )} + (0.4513(\frac{1-0.4513}{113)} )[/tex]

= -0.1634 ± 0.1374

= (-0.3008, -0.0260)

Therefore, we are 95% confident that the true difference in proportions of people who identify as a "dog person" in the city and rural areas is between -0.3008 and -0.0260.

To know more about "confidence interval" refer here:

https://brainly.com/question/29680703#

#SPJ11

The linear approximation of ln(1.09) is approximately equal to 0.09 (rounded to two decimal places).

To use a linear approximation to estimate ln(1.09) and produce a small error, we will follow these steps:
Step 1: Choose a value of 'a' close to 1.09 for which the natural logarithm is easy to calculate. In this case, we can choose a = 1.
Step 2: Find the derivative of the natural logarithm function, which is f'(x) = 1/x.
Step 3: Evaluate the derivative at the chosen value of 'a'. In our case, f'(1) = 1/1 = 1.
Step 4: Use the linear approximation formula to estimate ln(1.09):
ln(1.09) ≈ ln(a) + f'(a) * (1.09 - a)
Step 5: Plug in the values of 'a' and f'(a) into the formula:
ln(1.09) ≈ ln(1) + 1 * (1.09 - 1)
Since ln(1) = 0, we have:
ln(1.09) ≈ 1 * (0.09) = 0.09

Learn more about approximation: https://brainly.com/question/10171109

#SPJ11

From using the trigonometric substitution, the evaluate value of integral, [tex]I = \int \frac{ \sqrt{ 4- x²}}{x²} dx [/tex] is equals to the [tex]= -cos(\theta) - \theta + c [/tex].

The substitution rule is a way for evaluating integrals. It is based on the following identity between differentials, du = u dx . Trigonometric substitution is used because integrals involving square roots are difficult to solve. The three most used trigonometric substitutions are sine, tangent and secant. Thus, for the domains for sine, tangent and cosine are [−π/2, π/2] [ − π / 2 , π / 2 ] and (−π/2, π/2) respectively. Now, we have the integral [tex]I = \int \frac{ \sqrt{ 4- x²}}{x²} dx [/tex]. We have to solve above integral by trigonometric substitution. Now, using trigonometric substitution, substitute x = 2 sin(θ)

Differentiating, dx = 2 cos(θ) dθ

[tex]I = \int \frac{ \sqrt{ 4- (2 sin(θ)) ²}}{(2 sin(θ))²} 2 cos(θ) dθ[/tex]

[tex]= \int \frac{ \sqrt{ 4- \: 4sin²(θ)}}{4 \: sin²(θ)} 2 cos(θ) dθ[/tex]

[tex]= \int \frac{4 \sqrt{1 -sin²(θ)}}{4 \: sin²(θ) }cos(θ) dθ[/tex]

[tex]= \int \frac{ \sqrt{cos²(θ)}}{ sin²(θ)}cos(θ) dθ[/tex]

[tex]= \int \frac{cos²(θ)}{ sin²(θ)} dθ[/tex]

[tex] \int \frac{ 1 - sin²(θ)}{ \sin ^{2} ( \theta)} dθ[/tex]

[tex]= \int (-1 + csc²(θ)) dθ[/tex]

[tex]= -cos(\theta) - \theta + c [/tex]. Hence, required value is [tex]= -cos(\theta) - \theta + c [/tex].

For more information about trigonometric substitution, refer:

https://brainly.com/question/17199316

#SPJ4

Complete question:

Use the trigonometric substitution to integrate

[tex]\int \frac{ \sqrt{4- x²}}{x²} dx [/tex]

Answer: the answer is b

Step-by-step explanation:

Answer: D

Step-by-step explanation:

y =mx+c

(1) The two triangles are similar because they have equal angles.

(2)  Triangle QRS is similar to triangle QLM because they have equal angles.

(3) Both triangles are similar and the value of x is 21.

Two triangles are said to be similar if they have equal sides, equal angles or both.

The missing angles of the triangles for the question is calculated as;

Bigger triangle; missing angle = 180 - (44 + 46) = 90

Smaller triangle; missing angle = 90 - 46 = 44⁰

Both triangles are similar.

For the second question; triangle QRS is similar to triangle QLM  because angle R is equal to angle L, and also they have common angle Q, which implies that angle S must be equal to angle L.

For third question, the triangles are similar because their corresponding angles are equal.

The value of x is calculated as;

48 + 4x + (180 - (56 + 76)) = 180 (sum of angles on a straight line)

48 + 4x + 48 = 180

4x = 84

x = 84/4

x = 21

Learn more about similar triangles here: https://brainly.com/question/27996834

#SPJ1

Answer:

The answer to your problem is C. Each column will be the same height.

Step-by-step explanation:

If the mode will refers to the most occurring number.

And shown there are five within a data set that is 4 wide, so there will be 5 columns of equal length.

Thus the answer to your problem is, C. Each column will be the same height.

Answer:

.2250

Step-by-step explanation:

The cosine function is positive in the 1st quadrant. The value of cos 77 is given as .2250

Hope this helps

The value of x in the parallelogram is 1/3.

PQRT is a parallelogram

PT = 8x, TR = 6y, QT = 2x + 2, TS = 2y

We have to find the value of x

In a parallelogram the opposite sides are equal

8x=2x+2

Subtract 2x from both sides

6x=2

Divide both sides by 6

x=2/6

x=1/3

Hence, the value of x in the parallelogram is 1/3.

To learn more on Parallelogram click:

https://brainly.com/question/29147156

#SPJ1

The probability of getting exactly 417 girls in 811 births is approximately 0.0668.

The probability of getting 417 or more girls in 811 births is approximately 0.1349.

a. The probability of getting exactly 417 girls in 811 births is not 1. The correct probability can be calculated using the binomial probability formula:

P(X = k) = (n choose k) * p^k * (1-p)^(n-k)

where n is the total number of births, k is the number of girls, p is the probability of a girl birth (assumed to be 0.5 for simplicity), and "n choose k" denotes the binomial coefficient, which is calculated as:

(n choose k) = n! / (k! * (n-k)!)

Plugging in the values, we have:

P(X = 417) = (811 choose 417) * 0.5^417 * 0.5^(811-417)

Using a calculator or software, we can simplify and evaluate this expression to find:

P(X = 417) ≈ 0.0668

So the probability of getting exactly 417 girls in 811 births is approximately 0.0668.

b. To find the probability of getting 417 or more girls in 811 births, we need to calculate the cumulative probability from 417 to 811:

P(X ≥ 417) = P(X = 417) + P(X = 418) + ... + P(X = 811)

We can use software or a calculator to calculate this sum, or we can use the complement rule:

P(X ≥ 417) = 1 - P(X < 417)

To calculate P(X < 417), we can use the cumulative distribution function (CDF) of the binomial distribution:

P(X < 417) = sum(i=0 to 416) (811 choose i) * 0.5^i * 0.5^(811-i)

Again, using software or a calculator, we can evaluate this expression to find:

P(X < 417) ≈ 0.8651

So the probability of getting 417 or more girls in 811 births is:

P(X ≥ 417) = 1 - P(X < 417) ≈ 1 - 0.8651 ≈ 0.1349

Rounding to four decimal places, the probability of getting 417 or more girls in 811 births is approximately 0.1349.

Learn more about probability ,

https://brainly.com/question/24756209

#SPJ11

In a comprehensive headache treatment program, people who were low users of analgesic medications achieved at least a 50 percent reduction in headache pain.

A comprehensive headache treatment program is a multi-disciplinary approach to managing and treating headaches. It typically involves a team of healthcare professionals, such as neurologists, pain specialists, psychologists, physical therapists, and nutritionists, who work together to develop a personalized treatment plan for the patient.

Learn more about headache,

https://brainly.com/question/13580676

#SPJ11

The description of the parabola of the quadratic function is:

It opens downwards and is thinner than the parent function

The general formula for expressing a quadratic equation in standard form is:

y = ax² + bx + c

Quadratic equation In vertex form is:

y = a(x − h)² + k .

In both forms, y is the y -coordinate, x is the x -coordinate, and a is the constant that tells you whether the parabola is facing up ( + a ) or down ( − a ), (h, k) are coordinates of the vertex

In this case, a is negative and as such it indicates that it opens downwards and is thinner than the parent function

Read more about Quadratic function at: https://brainly.com/question/25841119

#SPJ1

The model you're referring to is a simplified representation of gas atoms, which helps us visualize their movement. In this model, atoms are depicted as two-dimensional objects to make it easier to understand.

The given statement suggests that there is a model used to visualize the movement of gas atoms. However, the model has limitations and does not show the interactions between atoms. It also depicts the atoms as two-dimensional objects. This means that the model is only a representation of the atoms' behavior and movement in a simplified manner, and it is not a completely accurate depiction of their behavior in real life.

Additionally, the fact that the model depicts the atoms as two-dimensional objects mean that it does not fully capture the true complexity of the three-dimensional nature of atoms. However, it's important to note that the model does not show the interactions between the atoms, as its primary purpose is to illustrate their motion.

Learn more about Two-dimensional:

brainly.com/question/27271392

#SPJ11

George's total dividends for the year as a percentage of the price he paid for each share is 380%, and the new percentage return for the year, assuming the stock price increases to $100, is 3.8%.

To calculate the total dividends and percentage return for the year, follow these steps:

1. Find the total dividend per share: $1 + $1 + $1 + $0.80 = $3.80

2. Find the price George paid for each share: Since the dividend is the same for all shares, we'll use the highest dividend of $1 as the price he paid for each share.

3. Calculate the total dividends for the year as a percentage of the price he paid for each share:

[tex](\frac{3.8}{1})(100)[/tex] = 380%

Now, let's find the new percentage return for the year, assuming the stock price increases to $100 and the company pays the same dividend:

4. Calculate the new percentage return for the year: [tex](\frac{3.8}{100})(100)[/tex]= 3.8%

To know more about the visit:

https://brainly.com/question/30760784

#SPJ11