The maximum uncertainty in the horizontal position of the marble, Delta x, is given as 1.75 m. The minimum uncertainty in the horizontal velocity of the marble is 6.03 x [tex]10^{-33[/tex] m/s. The time the marble could remain on the table is much shorter than the age of the universe, with a ratio of 1.41 x [tex]10^{-14[/tex].
Part B:
Delta x * Delta vx >= h/(4*[tex]\pi[/tex])
Where h is Planck's constant. Plugging in the given values, we get:
1.75 m * Delta vx >= (6.626 x [tex]10^{-34[/tex] Js)/(4[tex]\pi[/tex])
Delta vx >= (6.626 x [tex]10^{-34[/tex] Js)/(4[tex]\pi[/tex]*1.75 m)
Delta vx >= 6.03 x [tex]10^{-33[/tex] m/s (rounded to three significant figures)
Part C:
Delta x = Delta vx * t
Solving for t, we get:
t = Delta x / Delta vx
Substituting the given values, we get:
t = (1.75 m) / (6.03 x [tex]10^{-33[/tex] m/s)
t = 1.83 x [tex]10^{25[/tex] s (rounded to two significant figures)
The ratio of the time the marble could remain on the table to the age of the universe is:
[tex]t_{on table} / t_{universe}[/tex] = 1.83 x [tex]10^{25[/tex] s / (14 x [tex]10^9[/tex] years x 365 x 24 x 3600 s)
[tex]t_{on table} / t_{universe}[/tex] = 1.41 x [tex]10^{-14[/tex]
The universe is the totality of all matter, energy, and space, encompassing all known and unknown galaxies, stars, planets, and other celestial bodies. It is believed to have originated from a single point in an event known as the Big Bang, about 13.8 billion years ago.
The universe is constantly expanding, and this expansion is accelerating, driven by a mysterious force called dark energy. Scientists have developed several theories to understand the structure and behavior of the universe, including the theory of relativity and quantum mechanics. The universe is vast and largely unexplored, with countless mysteries waiting to be unraveled. Its immense size and complexity make it a subject of great fascination and curiosity for scientists and non-scientists alike.
To know more about Universe refer to-
brainly.com/question/11987268
#SPJ4
in an oscillating series rlc circuit, find the time required for the maximum energy present in the capacitor during an oscillation to fall to half its initial value. assume q t=−RLln(2)
In an oscillating series RLC circuit, the energy stored in the capacitor is given by E = (1/2)CV^2, where C is the capacitance of the capacitor and V is the voltage across the capacitor. The voltage across the capacitor is given by V = Q/C, where Q is the charge on the capacitor. The charge on the capacitor is related to the current flowing through the circuit by the equation Q = IXC, where X is the reactance of the circuit.
During an oscillation, the energy stored in the capacitor is maximum when the charge on the capacitor is maximum. The charge on the capacitor reaches its maximum value when the current flowing through the circuit is maximum. The current flowing through the circuit is given by I = V/Z, where Z is the impedance of the circuit. The impedance of the circuit is given by Z = sqrt(R^2 + (X_L - X_C)^2), where R is the resistance of the circuit, X_L is the inductive reactance of the circuit, and X_C is the capacitive reactance of the circuit.
The time required for the maximum energy present in the capacitor during an oscillation to fall to half its initial value can be calculated using the equation q t=−RLln(2), where q is the charge on the capacitor at the maximum energy, R is the resistance of the circuit, L is the inductance of the circuit, and ln(2) is the natural logarithm of 2. This equation gives the time constant of the circuit, which is the time required for the charge on the capacitor to fall to 1/e (about 0.37) of its initial value.
To find the time required for the maximum energy present in the capacitor during an oscillation to fall to half its initial value, we need to find the charge on the capacitor when the energy stored in the capacitor is half its maximum value. Since the energy stored in the capacitor is proportional to the square of the voltage across the capacitor, the voltage across the capacitor when the energy is half its maximum value is sqrt(1/2) times the voltage at maximum energy. The charge on the capacitor when the voltage across the capacitor is sqrt(1/2) times the maximum voltage can be found using the equation Q = CV, where C is the capacitance of the capacitor.
Once we have the charge on the capacitor when the energy is half its maximum value, we can use the equation q t=−RLln(2) to find the time required for the charge on the capacitor to fall to this value. This time represents the time required for the energy stored in the capacitor to fall to half its initial value.
In summary, the time required for the maximum energy present in the capacitor during an oscillation to fall to half its initial value in an oscillating series RLC circuit can be calculated as follows:
1. Calculate the voltage across the capacitor at maximum energy using the current flowing through the circuit and the impedance of the circuit.
2. Calculate the charge on the capacitor at maximum energy using the capacitance of the capacitor and the voltage across the capacitor.
3. Calculate the voltage across the capacitor when the energy stored in the capacitor is half its maximum value using the equation sqrt(1/2) times the maximum voltage.
4. Calculate the charge on the capacitor when the voltage across the capacitor is sqrt(1/2) times the maximum voltage using the capacitance of the capacitor.
5. Use the equation q t=−RLln(2) to find the time required for the charge on the capacitor to fall to the value calculated in step 4. This time represents the time required for the energy stored in the capacitor to fall to half its initial value.
Hi! In an oscillating series RLC circuit, the time required for the maximum energy present in the capacitor during an oscillation to fall to half its initial value can be found using the time constant (τ) of the circuit. The time constant is given by τ = L/R, where L is the inductance and R is the resistance. Using the formula you provided, q(t) = -RL * ln(2), we can determine the time.
To find the time when the energy falls to half its initial value, we set q(t) to half its initial value, which gives us:
0.5 * initial_energy = -RL * ln(2)
We can now solve for the time (t) as follows:
t = -(L/R) * ln(2)
This equation provides the time required for the maximum energy present in the capacitor during an oscillation to fall to half its initial value in an oscillating series RLC circuit.
To know more about RLC CIRCUIT visit:
https://brainly.com/question/29898671
#SPJ11
true or false? electronic energies are negative while translational, rotational and vibrational energies are positive.
The given statement '' Electronic energies are negative while translational, rotational and vibrational energies are positive '' is true.
This statement is generally true because Electronic energies in atoms, molecules, and solids are usually negative. This is because they represent the energy required to remove an electron from its lowest energy state (ground state) to a higher energy state (excited state) which is further away from the positively charged nucleus. Since the electron and the nucleus have opposite charges, the electron is bound to the nucleus by an attractive force, and it takes energy to move it farther away from the nucleus. Therefore, the energy required to remove an electron is negative.
On the other hand, translational, rotational, and vibrational energies are usually positive. Translational energy refers to the kinetic energy of the motion of an object in space, and it is always positive because it depends on the square of the velocity. Similarly, rotational energy refers to the kinetic energy of the rotation of an object around an axis, and it is also positive because it depends on the square of the angular velocity. Vibrational energy refers to the kinetic energy associated with the vibration of atoms or molecules within a material, and it is positive because it depends on the square of the amplitude of the vibration.
Hence, Electronic energies are negative while translational, rotational and vibrational energies are positive.
To know more about Electronic energies here
https://brainly.com/question/31802713
#SPJ4
If you touch the terminal of a battery, the small area of contact means that the skin resistance will be relatively large; 50kΩ is a reasonable value. What current will pass through your body if you touch the two terminals of a 9.0 V battery with your two hands? Will you feel it? Will it be dangerous?
The current in this case is 0.18 mA, it is possible that you may not feel it and not be dangerous.
To calculate the current passing through your body when you touch the two terminals of a 9.0 V battery with a skin resistance of 50 kΩ,
we can use Ohm's Law:
I = V/R,
where:
I is the current,
V is the voltage, and
R is the resistance.
In this case, V = 9.0 V and R = 50 kΩ = 50,000 Ω.
Substituting the values into the formula, we get:
I = 9.0 V / 50,000 Ω,
I = 0.00018 A.
Therefore, the current passing through your body will be 0.00018 Amperes or 0.18 milliamperes (mA).
Know more about current:
https://brainly.com/question/15141911
#SPJ12
a hydrometer is used to check the ____ of battery electrolyte.
In this lab, you will need to be able to describe how multiple waves interact with each other. 1) This does not add too much mathematical complexity to the wave equation (Eq. 2), and 2) it allows us to develop a closer approximation of real-life situations as well (e.g. interacting ripple patterns in a pond, music, atomic physics, etc.). Here you will explore the superposition of two waves, y1 and y2, where y1 =sin(πx−2πt) and y2 =sin(πx/2+2πt) 0.2 points Which of the following expressions accurately describes how these two distinct waves will combine? We call this interaction the principle of superposition.
The principle of superposition explains how multiple waves interact with each other. The accurate expression for the superposition of y1 and y2 is y = sin(πx - 5πt/2) + sin(πx + 9πt/2).
The principle of superposition is a fundamental concept in wave mechanics that explains how two or more waves interact with each other. In this lab, we explore the superposition of two waves, y1 = sin(πx - 2πt) and y2 = sin(πx/2 + 2πt). The expression for the superposition of these waves is y = sin(πx - 5πt/2) + sin(πx + 9πt/2). This expression accurately describes how the two waves combine, taking into account their amplitudes and frequencies.
The principle of superposition is applicable in a variety of real-life situations, including the study of ripple patterns in a pond, the production of music, and atomic physics. By understanding how waves interact and combine, we can develop a closer approximation of real-life situations and better understand the behavior of waves.
To know more about superposition visit:
https://brainly.com/question/30396687
#SPJ11
this image, made with data from radio telescopes around the world, shows an object located in the galaxy m87. what is significant about this image?
Among the thousands of galaxies that make up the so-called Virgo Cluster, the M87 is the radio energy source with the highest known output.
It is also a powerful X-ray emitter, which implies that the galaxy contains extremely hot gas. The galactic core emits a bright gaseous jet in all directions.
The Schwarzschild radius, or event horizon radius, of M87 was directly seen and measured by the EHT, allowing researchers to calculate the black hole's mass.
This validated the method as a method of mass estimation because the estimate was almost identical to the one obtained using a technique that employs the velocity of circling stars.
To learn more about galaxy M87, click:
https://brainly.com/question/13045589
#SPJ1
what is the average voltage generated in a moving conductor if it cuts 2.5 x 106 maxwells in 1/40 second?
The average voltage generated in the moving conductor is 100,000 volts.
To calculate the average voltage generated in a moving conductor, we need to use Faraday's Law of Electromagnetic Induction. According to this law, the induced voltage in a conductor is proportional to the rate of change of magnetic flux linking the conductor. Here, we are given that the conductor cuts 2.5 x 106 maxwells in 1/40 second.
Maxwell is a unit of magnetic flux, which is defined as the total magnetic field passing through a given area. Therefore, 2.5 x 106 maxwells represent the magnetic flux that the conductor cuts through in 1/40 second.
To calculate the average voltage generated, we need to divide this magnetic flux by the time taken to cut it. Therefore, the average voltage generated in the moving conductor can be calculated as:
Average Voltage = (2.5 x 106 maxwells) / (1/40 second)
Simplifying this expression, we get:
Average Voltage = (2.5 x 106 maxwells) x (40 seconds)
Average Voltage = 100,000 volts
To know more about conductor visit:
https://brainly.com/question/14405035
#SPJ11
spring is hung from the ceiling. when a block is attached to its end, it stretches 1.6 cm before reaching its new equilibrium length. the block is then pulled down slightly and released.
The block attached to a spring hanging from the ceiling stretches 1.6 cm before reaching its new equilibrium length. When the block is pulled down slightly and released, it will undergo simple harmonic motion.
When a block is attached to a spring and stretched from its equilibrium position, it creates a restoring force that causes the spring to return to its original length. This restoring force is proportional to the displacement from the equilibrium position, and it causes the block to undergo simple harmonic motion when released. The amplitude of the motion is equal to the initial displacement of the block, which in this case is 1.6 cm. The period of the motion depends only on the mass of the block and the spring constant of the spring, and it is given by T=2π√(m/k), where m is the mass of the block and k is the spring constant.
Learn more about length here:
https://brainly.com/question/9842733
#SPJ11
in each of the following radioactive decay processes, supply the missing particle. missing particle: 10e missing particle: 24he missing particle: 10e
The missing particle in this decay process is an electron, also known as a beta particle. The complete decay process can be written as:
A → B + 10e
where A is the parent nucleus, B is the daughter nucleus, and 10e represents the emission of a beta particle.
The missing particle in this decay process is a helium nucleus, also known as an alpha particle. The complete decay process can be written as:
A → B + 24He
where A is the parent nucleus, B is the daughter nucleus, and 24He represents the emission of an alpha particle.
The missing particle in this decay process is an electron, also known as a beta particle. The complete decay process can be written as:
A → B + 10e + v
where A is the parent nucleus, B is the daughter nucleus, 10e represents the emission of a beta particle, and v represents the emission of an antineutrino. This is a type of beta decay known as beta-minus decay.
Learn more about alpha particles here:- brainly.com/question/24276675
#SPJ11
Calculate the de Broglie wavelength of a 5 g bullet thatis moving at 340 m/s. Will the bullet exhibit wavelikeproperties?
The de Broglie wavelength of the bullet can be calculated using the de Broglie wavelength formula. The bullet will exhibit wavelike properties because it is a massive object moving at a high velocity.
According to quantum mechanics, every object has a wavelength associated with it, called the de Broglie wavelength. The de Broglie wavelength of a massive object can be calculated using the following formula:
λ = h/mv
Where λ is the de Broglie wavelength, h is the Planck constant, m is the mass of the object, and v is its velocity.
Substituting the given values, we get:
λ = 6.626 x 10^-34 J s / (5 x 10^-3 kg x 340 m/s)
= 3.885 x 10^-36 m
This is an incredibly small wavelength, which is typical for macroscopic objects. However, it is still measurable and indicates that the bullet exhibits wavelike properties.
The fact that the bullet exhibits wavelike properties is a fundamental principle of quantum mechanics. In the classical world, objects are described as particles with definite positions and velocities. However, in the quantum world, objects are described as wave-particle duality.
They have both particle-like and wave-like properties, and which one dominates depends on the circumstances of the measurement. For a massive object like a bullet, the wave-like properties are typically not observable in everyday life, but they are still present and can be measured under certain conditions.
Learn more about Planck constant here:- brainly.com/question/30763530
#SPJ11
An accelerating frame of reference cannot be distinguished from a gravitational field. According to general relativity, objects moved on curved paths due to the force of gravity. Why do scientists describe the theory of gravity as "incomplete"?
The theory of gravity is regarded as incomplete because it does not attempt to explain the origin of the force of gravity. Additionally, general relativity only provides a relatively simple understanding of gravity.
It does not explain the larger scale structure of the universe, which requires the addition of other components and physical constants. Furthermore, the very nature of gravity remains shrouded in mystery, and its effects, including blackholes and dark matter, have yet to be fully explained.
As a result, the theory of gravity is incomplete and requires further understanding. This is why modern physicists are still working to further develop and refine the theory of gravity, attempting to find a Grand Unified Theory which will provide a single explanation for all known forces in nature.
know more about gravity here
https://brainly.com/question/31321801#
#SPJ11
What is the difference in the path for the two light waves, coming from two slits and making a bright spot on the screen? two wavelengths one wavelength half wavelength one and a half wavelength
When two light waves pass through two slits and interact with each other, they create a pattern of interference on a screen. The path difference between the two waves determines the pattern that is produced. The path difference is the difference in distance that the two waves must travel from the slits to the screen.
If the two light waves have the same wavelength, then the path difference between them will determine the location of the bright spot on the screen. The bright spot will occur where the path difference is a whole number of wavelengths.
If the two light waves have different wavelengths, then the path difference will still determine the location of the bright spot on the screen, but the pattern may be more complex.
If the path difference is exactly half a wavelength, then destructive interference occurs, and a dark spot is produced on the screen. If the path difference is one and a half wavelengths, then constructive interference occurs, and a bright spot is produced on the screen.
In summary, the path difference between the two light waves determines the pattern of interference that is produced on the screen, and the wavelength of the light determines the complexity of the pattern.
to know more about wavelength, click this link
brainly.com/question/31143857
#SPJ11
Gravitational constant = 6.674 × 10^-11 m^2 /^2Mass of Pluto = 1.3 × 10^22 Radius of Pluto = 1200 m = 1.2 × 10^6 mBoltzmann constant = 1.4 × 10^(-23) J/K= 1.4 × 10^(-23) m^2 ^-2 ^ -1Mass of nitrogen molecule ( 2 ): m = 4.7 × 10^(-26) 1. What is Pluto’s escape velocity?2. If Pluto’s surface temperature is 50 K, what is the thermal velocity of a nitrogen molecule? Based on your answers to problems 2 and 3, do you think it is likely Pluto has a nitrogen-rich atmosphere like Earth’s?
1. Pluto's escape velocity can be calculated using the formula Ve = √(2GM/r), where G is the gravitational constant, M is the mass of Pluto, and r is the radius of Pluto. Plugging in the given values, we get Ve = √(2 x 6.674 x 10^-11 x 1.3 x 10^22 / 1.2 x 10^6) = 1.23 km/s.
2. The thermal velocity of a nitrogen molecule can be calculated using the formula Vth = √(3kT/m), where k is the Boltzmann constant, T is the temperature in Kelvin, and m is the mass of the molecule. Plugging in the given values, we get Vth = √(3 x 1.4 x 10^-23 x 50 / 4.7 x 10^-26) = 533.6 m/s.
3. Based on the calculated thermal velocity, it is unlikely that Pluto has a nitrogen-rich atmosphere like Earth's, as the escape velocity is much higher than the thermal velocity. This means that the nitrogen molecules are not likely to be trapped by Pluto's gravity and form an atmosphere. However, other factors such as the composition and history of Pluto's atmosphere could also play a role in determining its composition.
a piece of unpainted porous wood barely floats in an open container partly filled with water. the container is then sealed and pressurized above atmospheric pressure. what happens to the wood? it rises in the water. it sinks lower in the water. it remains at the same level. correct: your answer is correct. explain your answer.
The wood will sink lower in the water when the container is sealed and pressurized above atmospheric pressure.
When the container is sealed and pressurized above atmospheric pressure, the pressure inside the container increases. According to Boyle's Law, the volume of a gas is inversely proportional to its pressure at a constant temperature. This means that as the pressure inside the container increases, the volume of the air trapped in the pores of the wood decreases.
This results in a decrease in the buoyant force acting on the wood, which causes the wood to sink lower in the water. Therefore, the correct answer is "it sinks lower in the water." This phenomenon is also observed in the diving and submarine industry, where pressure changes affect the buoyancy of submerged objects.
Learn more about atmospheric pressure
https://brainly.com/question/31634228
#SPJ4
Full Question: a piece of unpainted porous wood barely floats in an open container partly filled with water. the container is then sealed and pressurized above atmospheric pressure. what happens to the wood?
it rises in the water. it sinks lower in the water. it remains at the same level.correct: your answer is correct. explain your answer.
The drag coefficient of a circular disk when placed normal to the flow is 1.12. Calculate the force and power necessary to drive a 12 in disk at 48 km/h through (a) standard air at sea level, and (b) water. Refer to Sec. 9.6 and Example 9.4 in your text book.
a) The force required to drive the 12 in disk at 48 km/h through standard air at sea level is P = 972.24 W.
(b) The force required to drive the 12 in disk at 48 km/h through water is F = 31.24 N and power will be P = 416.32 W.
(a) The force required to drive the 12 in disk at 48 km/h through standard air at sea level can be calculated using the drag equation:
F = (1/2) × ρ × A × [tex]v^{2}[/tex] × [tex]C_d[/tex].
F = 0.5 × 1.225 [tex]kg/m^{3}[/tex] × π × [tex](0.3048 m)^{2}[/tex] × (48 ÷ 3.6 [tex]m/s)^{2}[/tex] × 1.12,
F = 73.16 N.
The power required can be calculated using the formula:
P = F × v.
P = 73.16 N × (48 ÷ 3.6 m/s),
P = 972.24 W.
(b) The force required to drive the 12 in disk at 48 km/h through water can also be calculated using the drag equation:
F = (1/2) × ρ × A × [tex]v^{2}[/tex] × [tex]C_d[/tex].
F = 0.5 × 1000 [tex]kg/m^{3}[/tex] × π × [tex](0.3048 m)^{2}[/tex] × (48 ÷ 3.6 [tex]m/s)^{2}[/tex] × 1.12,
F = 31.24 N.
The power required can be calculated using the formula:
P = F × v.
P = 31.24 N × (48 ÷ 3.6 m/s),
P = 416.32 W.
To learn more about power follow the link:
https://brainly.com/question/30762942
#SPJ4
determine its angular acceleration after it is released from rest. neglect any frictional effects. the radius r1 is 0.2 m, and the radius r2 is 0.3 m
The angular acceleration of the object after it is released from rest can be calculated using the formula α = (g*(r1-r2))/r1r2, where g is the acceleration due to gravity. Neglecting any frictional effects, this formula takes into account the difference in radii between the object's initial and final positions.
When the object is released from rest, it begins to fall due to the force of gravity. As it falls, its potential energy is converted into kinetic energy, causing it to gain speed. Since the object is constrained to move along a circular path, this increase in speed corresponds to an increase in angular velocity. The angular acceleration is the rate at which the angular velocity is changing, and is given by the formula α = Δω/Δt.
In this problem, we can use the fact that the object is not sliding or slipping along the surface to assume that the net torque acting on it is zero. This means that the angular acceleration is solely determined by the radial forces acting on the object. The difference in radii between the object's initial and final positions gives rise to a net radial force, which is responsible for the object's angular acceleration. Using the formula α = (g*(r1-r2))/r1r2 takes into account this net radial force and yields the angular acceleration of the object.
Learn more about determine here:
https://brainly.com/question/31755910
#SPJ11
light with an intensity of 1 kw/m2 falls normally on a surface with an area of 1 cm and is completely reflected. the force of the radiation on the surface is
The force exerted by the radiation on the surface can be found using the formula F = P/c, where c is the speed of light in m/s. In this specific case, the force is approximately 3.3 x 10^-10 N.
To calculate the force of the radiation on the surface, we first need to find the total power (P) that falls on the surface. Power is the rate at which energy is transferred, and is given by the formula:
P = I x A
where I is the intensity of the light in watts per square meter (W/m2) and A is the area of the surface in square meters (m2).
In this case, the intensity is given as 1 kW/m2, or 1000 W/m2 (since 1 kW = 1000 W). The area is given as 1 cm2, or 0.0001 m2 (since 1 m2 = 10,000 cm2).
So, we have:
P = I x A = 1000 W/m2 x 0.0001 m2 = 0.1 W
Next, we need to find the force (F) exerted by the radiation on the surface. This can be done using the formula:
F = P/c
where c is the speed of light, which is approximately 3 x 108 meters per second (m/s).
Substituting the values we have:
F = P/c = 0.1 W / 3 x 108 m/s = 3.3 x 10^-10 N
Therefore, the force of the radiation on the surface is approximately 3.3 x 10^-10 N.
In summary, the long answer is that the force of the radiation on the surface is found by first calculating the total power that falls on the surface using the formula P = I x A, where I is the intensity of the light in W/m2 and A is the area of the surface in m2. Next, the force exerted by the radiation on the surface can be found using the formula F = P/c, where c is the speed of light in m/s. In this specific case, the force is approximately 3.3 x 10^-10 N.
To know more about force visit:-
https://brainly.com/question/13191643
#SPJ11
If the quantum fluctuations leading to the large scale structure of the Universe had been 10 times larger in magnitude, then 1. galaxy clusters and superclusters would be smaller. 2. galaxy clusters and superclusters would be larger. 3. atoms would be smaller. 4. atoms would be larger.
If the quantum fluctuations leading to the large-scale structure of the Universe had been 10 times larger in magnitude, then it would have resulted in a different scenario for the evolution of the Universe. This could have resulted in the formation of galaxy clusters and superclusters in a different way.
In general, the fluctuations determine the density variations in the early Universe, which eventually lead to the formation of structures such as galaxies, clusters and superclusters. If the fluctuations were 10 times larger, then it is likely that the resulting structures would have been smaller, since the density variations would have been more pronounced. Therefore, option 1 is the correct answer, where galaxy clusters and superclusters would have been smaller in size.
On the other hand, the size of atoms would not be affected by the fluctuations in the early Universe, since they formed much later. Therefore, options 3 and 4 are incorrect. Overall, the size of the structures in the Universe is influenced by the fluctuations in the early Universe, and if they had been different, it could have resulted in a very different Universe. However, the fact that we exist in the current Universe means that the fluctuations were just right to allow for the formation of the structures we observe today.
To know more about Quantum Fluctuations visit:
https://brainly.com/question/32004633
#SPJ11
Human Ear: The auditory canal of the ear is filled with air. One end is open, and the other end is closed by the eardrum. A particular person's auditory canal is 2.40 cm long and can be modeled as a pipe. The speed of sound in air is 343 m/s. a) What are the fundamental frequency and wavelength of this person's auditory canal? Is this sound audible? (3.57 kHz, 9.60 cm) b) Find the frequency of the highest audible harmonic (mode) of this person's canal. What mode number (harmonic) is this?
The fundamental frequency of the person's auditory canal can be calculated using the formula f = v/2L, where v is the speed of sound in air and L is the length of the canal. Plugging in the values, we get f = 343/(2*0.024) = 3575 Hz or 3.57 kHz. The wavelength can be calculated using the formula λ = 2L, which gives us λ = 2*0.024 = 0.048 m or 4.8 cm. This sound is audible as the range of human hearing is typically considered to be between 20 Hz and 20 kHz.
To find the frequency of the highest audible harmonic, we need to consider the resonant frequencies of the canal. The resonant frequencies of a pipe can be calculated using the formula fn = n(v/2L), where n is the mode number or harmonic. The highest audible harmonic is the one that corresponds to the highest resonant frequency that falls within the audible range.
Substituting the values, we get fn = n(343/0.048) = 7146n. The highest audible harmonic would be the one where 7146n is closest to 20,000 Hz, the upper limit of human hearing. Solving for n, we get n = 2.8, which means the third harmonic is the highest audible one. Therefore, the frequency of the highest audible harmonic is 3*3575 Hz or 10.7 kHz.
In conclusion, the person's auditory canal has a fundamental frequency of 3.57 kHz and a wavelength of 9.60 cm, making this sound audible. The highest audible harmonic is the third harmonic, with a frequency of 10.7 kHz.
you know more about fundamental frequency pls visit-
https://brainly.com/question/29264927
#SPJ11
A 100 W point source emits monochromatic light of wavelength 6000 Ao. Calculate the photon flux (in SI unit) at a distance of 5 m from the source. Given h=6.6×10 34J s and C=3×10 8ms −1
The photon flux at a distance of 5 m from the 100 W point source is 9.63 x 10¹³ photons/s.
The photon flux at a distance of 5 m from the 100 W point source can be calculated using the formula:
Photon flux = Power / (Energy per photon x Area x Time)
Here, the energy per photon can be calculated using the formula:
Energy per photon = h x C / wavelength
Substituting the given values, we get:
Energy per photon = (6.6 x 10⁻³⁴ J s x 3 x 10⁸ m/s) / (6000 x 10¹⁰ m)
= 3.3 x 10⁻¹⁹ J
The area of a sphere with a radius of 5 m is given by:
Area = 4πr²
= 4 x π x (5)²
= 314.16 m²
Substituting the values in the formula for photon flux, we get:
Photon flux = 100 W / (3.3 x 10⁻¹⁹ J x 314.16 m² x 1 s)
= 9.63 x 10¹³ photons/s
As a result, the photon flux at 5 m from the 100 W point source is 9.63 x 10¹³ photons/s.
To know more about the Monochromatic light, here
https://brainly.com/question/29892277
#SPJ4
How many grays is this? Part A A dose of 4.7 Sv of γ rays in a short period would be lethal to about half the people subjected to it. Part b What is the energy released in the fission reaction of the equation n+23592U→9440Zr+13952Te+3n? The atomic masses of 23592U, 9440Zr, and 13952Te are 235.043930 u, 93.906315 u , and 138.93473 u respectively, and the mass of a neutron is 1.008665 u.
The first part of the question asks about the lethal dose of γ rays in Sv, while the second part asks about the energy released in a fission reaction.
Part A: The lethal dose of γ rays in Sv is dependent on various factors, including the duration of exposure and the individual's sensitivity to radiation. However, the given information states that a dose of 4.7 Sv in a short period would be lethal to about half of the people subjected to it. This means that 4.7 Sv is a very high dose of radiation and can cause severe damage to the body.
Part B: The given fission reaction involves the neutron (n) colliding with uranium-235 (235U), resulting in the formation of zirconium-94 (94Zr), tellurium-139 (139Te), and three neutrons. To determine the energy released in this reaction, we need to calculate the difference in the mass of the reactants and products and then convert it into energy using Einstein's famous equation, E=mc². By subtracting the mass of the reactants from the mass of the products, we get a mass defect of 0.203775 u. Multiplying this by the speed of light squared ([tex]c{2} = 9 * 10^{16} m^{2} /s^{2}[/tex]) gives us the energy released, which is [tex]1.83 * 10^{13}[/tex] J.
A dose of 4.7 Sv of γ rays in a short period can be lethal to about half of the people exposed to it. The energy released in the given fission reaction is 1.83 * 10¹³ J, which is a significant amount of energy. Both parts of the question demonstrate the potential dangers and power of radiation and nuclear reactions.
For more information on nuclear fission kindly visit to
https://brainly.com/question/28439638
#SPJ11
how many kilocalories are generated when the brakes are used to bring a 1100- kg car to rest from a speed of 90 km/h ? 1 kcal
The amount of kilocalories generated when the brakes are used to bring a 1100-kg car to rest from a speed of 90 km/h can be calculated using the formula:
Energy = 0.5 * mass * velocity^2
Converting the given speed of 90 km/h to m/s, we get 25 m/s. Substituting the values, we get:
Energy = 0.5 * 1100 kg * (25 m/s)^2 = 687,500 J
To convert this energy from joules to kilocalories, we need to divide by 4184 J/kcal. Therefore, the amount of kilocalories generated is:
687,500 J / 4184 J/kcal = 164.1 kcal
So, the brakes generate 164.1 kilocalories when used to bring the car to rest from a speed of 90 km/h.
In summary, the amount of kilocalories generated when the brakes are used to bring a 1100-kg car to rest from a speed of 90 km/h is 164.1 kcal. This energy can be calculated using the formula for kinetic energy and then converting it from joules to kilocalories.
To learn more about kilocalories : brainly.com/question/30667858
#SPJ11
you have 12 kg of a radioactive substance. ten years later, you find that you only have 3 kg left. find the half-life of the material.
If ten years later, you find that you only have 3 kg left, the half-life of the material is 7.6 years.
The half-life of a radioactive substance is the amount of time it takes for half of the original sample to decay.
In this problem, we know that the initial amount of the substance was 12 kg and the final amount was 3 kg. The amount that has decayed is
12 kg - 3 kg = 9 kg.
To find the half-life of the material, we can use the formula:
N = N₀ [tex](1/2)^{(t/T)[/tex]
where N is the final amount, N₀ is the initial amount, t is the time elapsed, and T is the half-life.
We can rearrange this formula to solve for T:
T = t / ln(2) * log(N₀/N)
Plugging in the values we know, we get:
T = 10 years / ln(2) * log(12 kg / 3 kg) = 7.6 years
To learn more about half-life click on,
https://brainly.com/question/29186679
#SPJ4
a certain metal has a work function of 5.75 * 10-19 j. to what wavelength of light does this correspond ?
The wavelength of light required to remove an electron from this metal is approximately 3.43 x 10^-7 meters, which corresponds to the violet end of the visible spectrum.
The work function of a metal is the minimum amount of energy required to remove an electron from the metal's surface. When light with sufficient energy shines on the metal, it can cause electrons to be emitted through a process called the photoelectric effect.
The energy of a photon of light is given by the equation:
E = hc/λ
Where E is the energy of the photon, h is Planck's constant (6.626 x 10^-34 J.s), c is the speed of light (2.998 x 10^8 m/s), and λ is the wavelength of the light.
For the metal with a work function of 5.75 x 10^-19 J, we can find the minimum energy required to remove an electron by:
Φ = hc/λ
where Φ is the work function, h is Planck's constant, c is the speed of light, and λ is the wavelength of the light.
Rearranging this equation to solve for λ, we get:
λ = hc/Φ
Substituting the given values, we get:
λ = (6.626 x 10^-34 J.s)(2.998 x 10^8 m/s)/(5.75 x 10^-19 J)
Solving for λ gives:
λ = 3.43 x 10^-7 m
Therefore, the wavelength of light required to remove an electron from this metal is approximately 3.43 x 10^-7 meters, which corresponds to the violet end of the visible spectrum.
Visit to know more about Wavelength:-
brainly.com/question/24452579
#SPJ11
A spring scale hung from the ceiling stretches by 6.2 cm when a 1.3 kg mass is hung from it. The 1.3 kg mass is removed and replaced with a 1.8kg mass. What is the stretch of the spring?
The stretch of the spring with the 1.8kg mass is 8.68cm. the stretch of a spring is directly proportional to the weight applied to it. Using the formula F = kx, where F is the force applied to the spring, k is the spring constant, and x is the stretch of the spring, we can solve for k.
k = F/x = (mg)/x, where m is the mass of the object, g is the acceleration due to gravity (9.8 m/s^2), and x is the stretch of the spring.
Once we find k, we can use it to find the stretch of the spring for the 1.8 kg mass.
k = (mg)/x = (1.3 kg)(9.8 m/s^2)/(0.062 m) = 202.9 N/m
x = (mg)/k = (1.8 kg)(9.8 m/s^2)/(202.9 N/m) = 0.0868 m = 8.68 cm.
Therefore, the stretch of the spring with the 1.8 kg mass is 8.68 cm.
Learn more about spring here:
https://brainly.com/question/14670501
#SPJ11
6. why do you think the inside of a car feels so much warmer than its surroundings on sunny days? a. how can you use the sim to test your ideas?
One of the main reasons is that the windows and metal surfaces of the car act as a barrier to the outside air, trapping heat inside. This is known as the greenhouse effect, where the sun's rays enter the car and heat up the interior, but the windows prevent the heat from escaping.
Another factor is that cars are often made of materials that absorb and retain heat, such as upholstery and dashboard materials. These materials can heat up quickly and retain that heat, making the inside of the car feel even warmer than the outside air.Additionally, the shape and size of the car can also play a role in how warm it feels inside. For example, a small car with a small interior space will heat up more quickly than a larger car with more space for air to circulate.
To test these ideas, you could use a simple simulation by placing a thermometer inside a car on a sunny day and recording the temperature over time. You could then compare this to the temperature outside the car at the same time to see if there is a significant difference. Additionally, you could repeat this test with different types of cars and in different locations to see how these factors affect the temperature inside the car.
To know more about greenhouse effect visit:-
https://brainly.com/question/13706708
#SPJ11
pls help asap
which organic compound provides insulation and long-term energy storage
find the thinnest film coating (n=1.42) on glass (n=1.52) for which destructive interference of the red component (650. nm) of an incident white light beam in air can take place by reflection.
We can use the formula for the phase shift due to reflection for a thin film:
$2nt=\frac{\lambda}{2}$
where $n$ is the refractive index of the film, $t$ is the thickness of the film, and $\lambda$ is the wavelength of the incident light.
For destructive interference, the phase shift due to reflection must be equal to half a wavelength (i.e., 180 degrees out of phase).
Let's first find the wavelength of the red component of the incident light in the film:
$\lambda_{film}=\frac{\lambda_{air}}{n_{film}}=\frac{650.\ nm}{1.42}=457.7\ nm$
Now we can substitute into the phase shift equation and solve for the thickness of the film:
$2n_{film}t=\frac{\lambda_{film}}{2}$
$t=\frac{\lambda_{film}}{4n_{film}}=\frac{457.7\ nm}{4\times 1.42}=80.7\ nm$
Therefore, the thinnest film coating on glass for which destructive interference of the red component of the incident white light beam in air can take place by reflection is approximately 80.7 nm.
To know more about reflection click this link -
brainly.com/question/30270479
#SPJ11
Find the current of a circuit that uses a 50-ohm resistor and a 12-volt battery.
Answer:
240 mah
Explanation:
To find the current of the circuit that uses a 50-ohm resistor and a 12-volt battery, we can use Ohm's law, which states that the current (I) in a circuit is equal to the voltage (V) divided by the resistance (R), or I = V/R.
In this case, the voltage is 12 volts and the resistance is 50 ohms, so we have:
I = V/R = 12/50 = 0.24 amperes (or 240 milliamperes)
Therefore, the current of the circuit is 0.24 amperes (or 240 milliamperes).
a honking car is coming right at you while you are at rest. the wavelength and frequency of the sound of the horn that reaches you compares how to the sound of the horn at rest?
As the car is coming towards you, the sound waves are compressed, resulting in a shorter wavelength and a higher frequency.
What is wavelength?The wavelength of light is described as "the distance between the two successive crests or troughs of the light wave".
The wavelength of the sound of the horn that reaches you will be compressed, while the frequency will be higher than the sound of the horn at rest. This is due to the Doppler effect, which causes a shift in frequency and wavelength of sound waves when the source of the sound and the observer are in relative motion. In this case, as the car is coming towards you, the sound waves are compressed, resulting in a shorter wavelength and a higher frequency.
Learn more about wavelength on:
https://brainly.com/question/24452579
#SPJ4