The volume of 0.30 M potassium chromate needed to react with 15 ml of 0.10 M ferric nitrate is 5 ml.
What is molarity?Molarity of a solution is the ratio of its number of moles of solute to the volume of solution in liter. It is the common term used to express the concentration of a solution.
Let V1 and M1 be the volume and molarity of solution 1 and V2 and M2 that of solution 2 which are reacting together.
Thus, V1 M1 = V2 M2.
The volume of 0.30 M potassium chromate is calculated as follows:
volume = (15 ml × 0.10 M) / 0.30 M = 5 ml.
Therefore, the volume of the potassium chromate solution is 5 mL.
To find more on molarity, refer here:
https://brainly.com/question/8732513
#SPJ1
Gelatinization happens with what type of Carbohydrate?
Calculate the value of the equilibrium constant for the following system, where the concentrations of reactants and products are: [NO]=1.2x10^-3M , [NO2]=1.5x10-^1M , [N2O]=2.4x10^-3M
Answer:
The equilibrium constant is 2.08x10⁵
Explanation:
Based on the reaction:
3NO ⇄ N₂O + NO₂
The equilibrium constant, k, is defined as:
k = [NO₂] [N₂O] / [NO]³
Where the [] is the molarity in equilibrium of each specie.
Computing te values of the problem:
k = [1.5x10⁻¹M] [2.4x10⁻³M] / [1.2x10⁻³M]³
k = 2.08x10⁵
The equilibrium constant is 2.08x10⁵
A 36.6-mol sample of Co represents how many atoms?
Answer:
2.20 x 10²⁵ atoms
Explanation:
Atoms of CO= 36.6-mol sample
From Avogadro's constant, which is
(6.022 × 10^ 23 atoms per mole)
Then
Number of atoms=[ 6.022 × 10^ 23 atoms/mole] × [36.6-mol]
= 2.20 x 10²⁵ atoms
Hence, number of atom is 2.20 x 10²⁵ atoms
If 4.50 moles of C2H6 undergoes combustion, how many moles of oxygen would it combust with?
Answer:
First balance the equation
C2H6 + 7/2O2 2CO2 +3H2O
for one mole of C2H6 there are 7/2 mole of O2 required. so for4.50 moles you require 4.50 x 7/2 = 15.75 moles of O2.
Explanation:
I take in oxgyen from the air and send it into your bloodstream. I also remove the carbon dioxide from your body. What system am I?
muscular system
respiratory system
digestive system
skeletal system please help
The equation H2 + O2 -> H2O is unbalanced. When balanced, what is the correct coefficient for O2?
Answer:
The balanced equation would be 2H2 + O2 -> 2H2O
Explanation:
The correct balanced equation is 2H₂ + O₂ → 2H₂O, and the correct coefficient for O₂ is 1.
How to balance a chemical equation?Count the atoms on each side first. Next, alter one of the compounds' coefficient. Third, count the atoms once more, and then repeat steps two and three until the equation is balanced.
In the given equation, hydrogens are already balanced. To balance oxygen, multiple water with 2. Thus, equation becomes:
H₂ + O₂ → 2 H₂O
Now, oxygen is balanced, just the hydrogens got unbalanced. To balance hydrogen, multiply the hydrogen by 2 on the left side.
2 H₂ + O₂ → 2H₂O
Now the chemical equation is balanced, in which the number of oxygen and hydrogen are equal on both sides of the arrow.
Therefore, the coefficient of O₂ is 1.
Learn more about chemical equation, here:
https://brainly.com/question/7623022
#SPJ2
A 38.22 mL aliquot of weak acid that has a concentration of 0.882 M will be titrated with 0.289 M NaOH. Calculate the pH of of the solution upon neutralization of half of the weak acid. The Ka of the acid is 6.8×10-7.
Answer:
pH = 6.167
Explanation:
The weak acid, HX, reacts with NaOH as follows:
HX + NaOH → NaX + H₂O
Where 1 mole of HX with 1 mole of NaOH produce 1 mole of NaX (The conjugate base of the weak acid).
Now, using H-H equation:
pH = pKa + log [NaX] / [HX]
Where pH is the pH of the buffer
pKa is -log Ka = 6.167
And [NaX] [HX] are the molar concentrations of each specie
Now, at the neutralization of the half of HX, the other half is as NaX, that means:
[NaX] = [HX]
And:
pH = pKa + log [NaX] / [HX]
pH = 6.167 + log 1
pH = 6.167Which letter in the rock cycle diagram represents metamorphic rock?
A)
A.
B)
B.
)
D.
D)
E.
Answer:
B.Explanation:
Hopes this helps. Mark as brainlest plz!Answer:
b
Explanation:
learned this in science class
How many moles is 30 grams of CO2?
Answer:
68
Explanation:
Give an example of a model used in Earth science. Explain why models are particularly important to this field.
Answer:
Some examples include maps and globes. Conceptual Models - These models serve as a tool to piece together a variety of concepts together so that we can better conceptualize the phenomena under investigation.
Scientific models are used to explain and predict the behaviour of real objects or systems and are used in a variety of scientific disciplines, ranging from physics and chemistry to ecology and the Earth sciences
Why do we test for free chlorine in drinking water?
Answer:
The presence of free chlorine in drinking water is correlated with the absence of most disease-causing organisms, and thus is a measure of the potability of water
b) A piece of solid gold was heated from 274K to 314K using 55.7J of energy to raise the
temperature. What mass of gold was present?
Answer:
Explanation:
So we know q = mc[tex]\Delta[/tex]T.
q = 55.7 J
c = 0.129j/g°C
and [tex]\Delta[/tex]T = 314-274 = 40°C.
and m is mass which can solve since we got every other variable. We will get m = 10.8g.
Chrysanthemic acid occurs as a mixture of esters in flowers of the chrysanthemum (pyrethrum) family.
a. True
b. False
Answer:
A: True
Explanation:
Statement is true because chrysanthemic acid is formed naturally as a result of production of two molecules of dimethylallyl diphosphate which forms pyrophosphate ester.
Thus, it belongs to the pyrethrum family
10. Which of the following group of colors of the visible light is listed from
lowest to highest frequency?
A. Blue, green, red
C. Red, violet, green
B. Green, blue, red
D. Red, green, violet
Answer:
The correct answer is - D. Red, green, violet.
Explanation:
Visible light is the spectrum of light that can be seen by the naked eyes of humans without any equipment. This spectrum has various frequency light that helps us see things in color. The frequency of light ranges between seven different colors in which violet has the highest frequency and red has the lowest.
The different frequencies are as follows:
color frequency
red (limit) 1.77
red 1.91
orange 2.06
yellow 2.14
green 2.25
cyan 2.48
blue 2.75
violet (limit) 3.10
On this basis of this the group of colors of the visible light is listed from
lowest to the highest frequency - Red, green, violet
The limestone used in building the Egyptian pyramids was used because it is _____________
O soft and sticky
O easily melted
O hard and brittle
Answer:
hard and brittle
hope this helps you ☺️☺️
good night take care sweet dream
The molecular weight (MW) of CuSO4 is 250g/mol. How many grams of CuSO4 are needed to make a 10 ml solution that has a molarity of 2.0 M?
Answer:
Explanation:
(The MW of CuSO4 is 250 g/mol).
Answer:
5 grams of CuSO4
Explanation:
First you make a stoichiometric relationship between the molarity and liters. So there is 2 mols per every liter. Then you put in the moleculur weight( for every mol there is 250 g). Then you have to get rid of the liters, so you times the equation by 0.01(this was found by 10ml converted into liters). After all of that you should end up with 5 grams of CuSo4
What was the purpose of letting the transformed cells sit in LB for a few minutes before spreading them onto the plates?
A. This allows time for the cells to express the antibiotic resistance gene
B. This allows the cells to take up the plasmid after the heat shock procedure
C. This allows time for the cells to warm up before plating
D. This allows cells time to start glowing green
In this project, you will develop a model of a chemical reaction that either releases energy or absorbs energy. Whether a reaction releases or absorbs energy depends on the overall difference in the bond energies of the reactants and products. Your model should show the relationships between the parts of the system. These parts are the molecules and atoms that take part in the reaction. The model should also distinguish the reaction system from other systems.
Answer:
that ain't chemistry that's science
Which ecosystem is the least stable?
A. A rain forest
B. A cornfield
C. A savanna
D. A coral reef
What is the formal charge on the phosphorus in the PO43- polyatomic ion?
Answer:
P has a formal charge of 0
Explanation:
Essentially P is in the middle of that ion, and its valence electrons are being used with the 4 Os. Hope that makes sense or helps at least. There's good videos that talk about how this works but I can't link them in brainly
Your friend had an upset stomach caused by indigestion. His mother explained to him
that indigestion is when the contents in the stomach are too acidic. She also told him to
drink soda to settle his stomach. The soda did not help. You tell him that you would not
have expected the soda to help with the indigestion based on what you know about
acids and bases.
ليالي
Baking Soda
Acidic
Neutral
Basic
Explain why soda would not help settle your friend's stomach. In your reponse, be sure
to include:
• a better alternative to drinking soda.
• how each substance above would react with the stomach acid.
• defining characteristics of acids and bases, besides how they react.
Be sure to consider the completeness of your response, supporting details, and accurate
use of terms.
Answer:
because it may cause burn that causes acid to build up which causes you to keep having an upset stomach
Coal, oil, and natural gas are called _______.
A.
fossil fuels
B.
renewable resources
C.
nuclear power
D.
solar energy
Answer:
I think it's A. I'm pretty sure.
Explanation:
Answer:
Coal, oil and natural gas are called _________A. fossil fuels
Which of the solids in the following set should you test to investigate for the effects of ANIONS on pH? Will give brainliest
-KClO
-RbF
-AlBr3
-Rb2SO3
-CrCl3
Answer:
KCIO
Explanation:
the only reason is because I looked online and the meaning for that is potassium hypochlorite my guy so if this is not right then I'm sorry but good luck.
What is the correct coefficient for Fe2O3 in the balanced version of the following equation?
Fe2O3 + 3H2 → 2Fe + 3H2O
__Fe2O3+3H2→2Fe+3H2O
Answer:
The coefficient of Fe₂O₃ is 1
Explanation:
__Fe₂O₃ + 3H₂ —> 2Fe + 3H₂O
To know the correct coefficient of Fe₂O₃, we shall balanced the equation. This can be obtained as follow:
Fe₂O₃ + H₂ —> Fe + H₂O
There are 2 atoms of Fe on the left side and 1 atom on right side. It can be balance by writing 2 before Fe as shown below:
Fe₂O₃ + H₂ —> 2Fe + H₂O
There are 3 atoms of O on the left side and 1 atom on the right side. It can be balance by writing 3 before H₂O as shown below:
Fe₂O₃ + H₂ —> 2Fe + 3H₂O
There are 2 atoms of H on the left side and 6 atoms on the right side. It can be balance by writing 3 before H₂ as shown below:
Fe₂O₃ + 3H₂ —> 2Fe + 3H₂O
Now, the equation is balanced.
Thus, the coefficient of Fe₂O₃ is 1
3. Determine the enthalpy of formation for propane. 3C(s, gr) + 4H2(g) ---> C3H2(g) CzH3(g) AH = -2219.9 kJ C(s, gr) AH = -393.5 kJ H,(g) AH = -285.8 kJ a. -205.7 /mol b. -103.8 kJ/mol Å C. + 205.7 /mol d. + 103.8 /mol
Answer:
b I hope this is right good luck
How many moles of argon gas would be present in a 37.0 liter vessel at 45.00 °C at a pressure of 2.50 atm?
Answer:
3.54 mol
Explanation:
Step 1: Given data
Volume (V): 37.0 LTemperature (T): 45.00 °CPressure (P): 2.50 atmStep 2: Convert "T" to Kelvin
We will use the following expression.
K = °C + 273.15
K = 45.00°C + 273.15 = 318.15 K
Step 3: Calculate the number of moles (n) of argon gas
We will use the ideal gas equation.
P × V = n × R × T
n = P × V/R × T
n = 2.50 atm × 37.0 L/(0.0821 atm.L/mol.K) × 318.15 K = 3.54 mol
Describe in your own words what is an air front is
Answer:
A front is a weather system that is the boundary separating two different types of air. One type of air is usually denser than the other, with different temperatures and different levels of humidity.
water and Air are needed for iron rust answer true or false
Answer:True
Explanation:
PLZ GIVE ME BRAINLIEST, I NEED IT
The different unit cell types have a different packing efficiency. The simple cubic has the least efficient packing and the face-centered cubic has the most efficient packing (sometimes the face-centered cubic is called cubic closest packing). You can determine what percent of the unit cell is occupied by (1) determining the volume of the whole unit cell and (2) determining the volume of the occupied space by the atoms in the unit cell. Remember that the volume of a cube is V
Answer:
The answer is "52.8".
Explanation:
Please find the graph file in the attachment.
They have the atoms in 8 corners with one unit cell in an one so mesh (SCC).
Atoms throughout the corner contribute [tex]\frac{1}{8}[/tex]to both the cell unit
Atom number per SCC unit cell, [tex]Z = (8 \times \frac{1}{8}) = 1[/tex]
Let 'r' become the atom's radius. [tex]r = 3.43\times 10^{-8}\ \ cm[/tex]
We can see from the diagram that edge length [tex]AB = a = 2r[/tex]
[tex]Packing\ efficiency = \frac{(1 \ atom \ Volume \times Z)}{Volume \ of \ unit\ cell \times 100}\\\\[/tex]
[tex]= \frac{\frac{4}{3}\times \pi \times r^3 \times 1}{a^3 \times 100}\\\\=\frac{\frac{4}{3}\times \pi \times r^3 \times 1}{(2r)^3 \times 100} \\\\=\frac{\frac{4}{3}\times \pi \times( 3.43\times 10^{-8}cm)^3 \times 1}{(2\times 3.43\times 10^{-8}cm)^3 \times 100}\\\\= 52.8 \%[/tex]
Is it posible Count a grain of sand?explain
Answer:
Yes
Explanation:
As long as its a solid, you can count it. It will be hard, but possible.