Answer: I=0.52 A
Explanation:
Given
Voltage is [tex]2.5\ V[/tex]
Resistance [tex]R=4.8\ \Omega[/tex]
Current is given by
[tex]I=\dfrac{V}{R}[/tex]
[tex]\Rightarrow I=\dfrac{2.5}{4.8}=0.52\ A[/tex]
An old shade-tree mechanic trick for removing a stubborn bolt is to slip a long pipe over the handle of the wrench, then apply a force to the end of the pipe opposite the bolt.
Why is this effective? What problems might this technique cause?
Answer: long pipe is used to increase torque and reduce force needed.
Explanation: A torque is needed to open bolt. torque = F·r, if
R increases, Force F needed to open bold is smaller.
Problem is a worn bolt may break down. It sometimes I send useful to heat bolt instead using too much power.
The 10-lb block A attains a velocity of 2ft/s in 5 seconds, starting from rest. Determine the tension in the cord and the coefficient of kinetic friction between block A and the horizontal plane. Neglect the weight of the pulley. Block B has a weight of 8 lb. Please work on this by using the principle of linear impulse-momentum
Answer:
Explanation:
Let T be the tension in the cord.
Impulse by cord = change in momentum of block A .
T x 5s = 10 ( 2 -0) = 20
T = 4 poundal .
acceleration of block B = 2 / 5 = 0.4 m /s²
Net force applied on A = m ( g + a ) where m is mass of block B , a is acceleration of block B .
= 8 ( 32 + .4 ) = 259.2 poundal
Frictional force on block A = 259.2 - 4 = 255.2 poundal
μ x 10 x 32 = 255.2
320μ = 255.2
μ =0 .8 .
How much current is drawn by a television
with a resistance of 43 Ω that is connected
across a potential difference of 112 V?
Answer in units of A.
Answer:
Explanation:
v = ir
v/r = i
112/43 = i
2.60 ≈ i
5. How does a jack make changing a tire easier?
Answer: An jack makes changing a tire easier because it lifts up the car to get the tire off of the ground.
Explanation:
A typical electric refrigerator has a power rating of 500 Watts, which is the rate (J/s) at which electrical energy is supplied to do work needed to remove heat from the refrigerator. If the refrigerator releases heat to the room at a rate of 800 Watts, at what rate (in Watts) does it remove heat from inside of the refrigerator?
Answer:
The rate of heat removed from inside the refrigerator is 300 watts.
Explanation:
By the First Law of Thermodynamics and the definition of a Refrigeration Cycle, we have the following formula to determine the rate of heat removed from inside the refrigerator ([tex]\dot Q_{L}[/tex]), in watts:
[tex]\dot Q_{L} = \dot Q_{H}-\dot W[/tex] (1)
Where:
[tex]\dot Q_{H}[/tex] - Rate of heat released to the room, in watts.
[tex]\dot W[/tex] - Rate of electric energy needed by the refrigerator, in watts.
If we know that [tex]\dot Q_{H} = 800\,W[/tex] and [tex]\dot W = 500\,W[/tex], then the rate of heat removed from inside the refrigerator is:
[tex]\dot Q_{L} = \dot Q_{H}-\dot W[/tex]
[tex]\dot Q_{L} = 300\,W[/tex]
The rate of heat removed from inside the refrigerator is 300 watts.
A long conducting cylinder of radius a carrying a total charge +q is surrounded by a
concentric thin conducting cylindrical shell of radius b carrying a total charge -2q.
Draw the cross section of this arrangement. Use Gauss’s law to find the electric field
strength at a point r away from the axis,
Answer:
I don't know this, sorry
A chain is wrapped around pulley and pulled with a force of
16.0N .The pulley has a radius of 0.20 m. The pulley's rotational
speed increases from 0.0 to 17.0 rev/min in 5.00s What is the moment
of inertia of Pulley?
The moment of inertia of Pulley is 8.89 kgm².
Angular acceleration of the pulleyThe angular acceleration of the pulley is calculated as follows;
[tex]\alpha = \frac{\omega_f - \omega _i}{t}[/tex]
where;
ωi is the initial angular velocity = 0 ωf is the final angular velocity = 17 rev/mint is the time of motionFinal angular velocity in radian per second is calculated as
[tex]\omega _f = 17 \frac{rev}{\min} \times \frac{2\pi \ rad}{1 \ rev} \times \frac{1\min}{60 \ s} = 1.78 \ rad/s[/tex]
Now, solve for angular acceleration
[tex]\alpha = \frac{1.78-0}{5} \\\\\alpha = 0.36 \ rad/s^2[/tex]
Moment of inertia of the pulleyThe the moment of inertia of Pulley is determined using the formula for torque.
Iα = Fr
I = Fr/α
I = (16 x 0.2)/(0.36)
I = 8.89 kgm²
Thus, the moment of inertia of Pulley is 8.89 kgm².
Learn more about moment of inertia here: https://brainly.com/question/25803184
Select the correct arrows. Identify the arrows that show the correct direction of heat transfer.
Answer:
Explanation:I Did the test and it said this was the right answer so it probally is
Answer:
That's the question that I wanted to ask!!
Explanation:
Which theory states that the principle cause of forgetting is passage of time? A. motivated forgetting B. retrieval failure C. decay theory D. ineffective encoding
Calculate the height of a cliff if it takes 2.35s for a rock to hit the ground when it is thrown straight up from the cliff with a initial velocity 8m/s.
Answer:
y₀ = 10.625 m
Explanation:
For this exercise we will use the kinematic relations, where the upward direction is positive.
y = y₀ + v₀ t - ½ g t²
in the exercise they indicate the initial velocity v₀ = 8 m / s.
when the rock reaches the ground its height is zero
0 = y₀ + v₀ t - ½ g t²
y₀i = -v₀ t + ½ g t²
let's calculate
y₀ = - 8 2.5 + ½ 9.8 2.5²
y₀ = 10.625 m
A house brick has a volume of 1900 cm³ and a weight in air of 80N.What is its apparent weight in water?The density of water is 1.00 g cm³?
Answer:
61 N
Explanation:
We'll begin by calculating the mass of the brick when placed in water. This can be obtained as follow:
Volume of brick = 1900 cm³
Density of water = 1 g/cm³
Mass of brick in water =…?
Density = mass / volume
1 = mass of brick in water / 1900
Cross multiply
Mass of brick in water = 1 × 1900
Mass of brick in water = 1900 g
Next, we shall convert 1900 g to Kg.
1000 g = 1 Kg
Therefore,
1900 g = 1900 g × 1 Kg / 1000 g
1900 g = 1.9 Kg
Next, we shall determine the weight in water. This can be obtained as follow:
Mass (m) = 1.9 Kg
Acceleration due to gravity (g) = 10 m/s²
Weight (W) =?
W = m × g
W = 1.9 × 10
W = 19 N
Thus, the weight of the brick in water is 19 N.
Finally, we shall determine the apparent weight of the brick in water. This can be obtained as follow:
Weight in air = 80 N
Weight in water = 19 N
Apparent weight =?
Apparent weight = weight in air – weight in water
Apparent weight = 80 – 19
Apparent weight = 61 N
Two loudspeakers placed 6.0 m apart are driven in phase by an audio oscillator whose frequency range is 2193 Hz to 2967 Hz. A point P is located 4.4 m from one loudspeaker and 3.6 m from the other. The speed of sound is 344 m/s. The frequency produced by the oscillator, for which constructive interference of sound occurs at point P, is closest to
Answer:
"2580 Hz" is the correct solution.
Explanation:
According to the question,
The path difference,
= [tex]4.4 - 3.6[/tex]
= [tex]0.80 \ m[/tex]
Speed,
= 344 m/s
For constructive interference,
⇒ [tex]Path \ difference =n\times \frac{Speed}{frequency}[/tex]
On substituting the values, we get
⇒ [tex]0.80=n\times \frac{344}{frequency}[/tex]
⇒ [tex]frequency=n\times 430[/tex]
⇒ [tex]n=\frac{frequency}{430}[/tex]
If the frequency range is,
f = 2193,
⇒ [tex]n=\frac{2193}{430}[/tex]
[tex]=5.1[/tex]
If the frequency range is,
f = 2967,
⇒ [tex]n=\frac{2967}{430}[/tex]
[tex]=6.9[/tex]
hence,
For n = 6, the frequency will be:
⇒ [tex]Frequency=n\times 430[/tex]
[tex]=6\times 430[/tex]
[tex]=2580 \ Hz[/tex]
A uniform 40-N board supports two children weighing 500 N and 350 N. If the support is at the center of the board and the 500-N child is 1.5 m from its center, How far is the 350-N child from the center
Determine the upward force exerted on the board?
Answer:
2.14 m
Explanation:
2.14m if it is write thank me hitting the heart ❤️ I took a lot of time to solve
What is the wavelength associated with 0.113kg ball traveling with velocity of 43 m/s?
Answer:
Wavelength = 1.36 * 10^{-34} meters
Explanation:
Given the following data;
Mass = 0.113 kg
Velocity = 43 m/s
To find the wavelength, we would use the De Broglie's wave equation.
Mathematically, it is given by the formula;
[tex] Wavelength = \frac {h}{mv} [/tex]
Where;
h represents Planck’s constant.
m represents the mass of the particle.
v represents the velocity of the particle.
We know that Planck’s constant = 6.6262 * 10^{-34} Js
Substituting into the formula, we have;
[tex] Wavelength = \frac {6.6262 * 10^{-34}}{0.113*43} [/tex]
[tex] Wavelength = \frac {6.6262 * 10^{-34}}{4.859} [/tex]
Wavelength = 1.36 * 10^{-34} meters
How does mass differ from weight? List 2 differences.
weight is vector vary from place to place
Answer:
The difference between mass and weight is that mass is the amount of matter in a material, while weight is a measure of how the force of gravity acts upon that mass.
Explanation:
Mass is the measure of the amount of matter in a body. Mass is denoted using m or M. ... Weight is mass multiplied by the acceleration of gravity (g).
Wind turbines continue to generate energy even when there isn't any wind.
O True
O False
The fictional rocket ship Adventure is measured to be 50 m long by the ship's captain inside the rocket.When the rocket moves past a space dock at 0.5c, space-dock personnel measure the rocket ship to be 43.3 m long. Part A The rocket ship Adventure travels to a star many light-years away, then turns around and returns at the same speed. When it returns to the space dock, who would have aged less: the space-dock personnel or ship's captain?
Complete question:
Part A:) The fictional rocket ship Adventure is measured to be 50 m long by the ship's captain inside the rocket.When the rocket moves past a space dock at 0.5c , space-dock personnel measure the rocket ship to be 43.3 m long. The rocket ship Adventure travels to a star many light-years away, then turns around and returns at the same speed. When it returns to the space dock, who would have aged less: the space-dock personnel or ship's captain?
Part B: What is the momentum of a proton traveling at 0.62 c ?
Answer
a)Who would have aged less=The Captain would have aged less
b) [tex]p=3.96*10^{-19}kgm/s[/tex]
Explanation:
From the question we are told that
Length measured by captain [tex]l_c=50m[/tex]
Speed of rocket past tje space dock [tex]V=0.5c[/tex]
Length measured by space-dock personnel [tex]l_c=43.3m[/tex]
a)
Generally time moves slower when moving at speed of light, due to time dilation or variation.
Who would have aged less=The Captain would have aged less
b)
Generally the equation for Relativistic Momentum is mathematically given as
[tex]p=\frac{m*v}{1 - v^2/c^2}[/tex]
[tex]p=\frac{1.67*10^2-27*0.62*3.0*10^8)}{\sqrt{ 1 -0.6^2}}[/tex]
[tex]p=3.96*10^{-19}kgm/s[/tex]
Which of the following is an example of a noncontrolled substance?
A. Sleeping pills
B. Coffee
C. Pain medications
D. Cough medications
SUBMIT
An example of noncontrolled substance from the option is Cough medications.
What are Noncontrolled substances?Noncontrolled substances are substances that are prescribed by medical personnel or pharmaceutical professionals for treatment of a disorder or ailments that is affecting a person.
Noncontrolled substances include medications that are majorly prescribed for treatment of medical conditions like high blood pressure, diabetes, and bacterial infections.
Therefore, An example of noncontrolled substance from the option is Cough medications.
Learn more about noncontrolled substances below.
https://brainly.com/question/5349491
how to makee them love you I AM JK U ARE BEAUTIFUL U DONT NEED A MAN GIRL GO STUDY INSTEAD OF CHECKING UR PHONE 100 TIMES A DAY. ILYYY DONT FORGET THAT
Explanation:
lol ....you are right.......
Visible light falls into wavelength ranges of 400-700 nm, for which 1 m = 1 × 10 9 nm . The energy and wavelength of light are related by the equation E = h c λ where E is energy in Joules, h is Planck's constant ( 6.626 × 10 − 34 J-s ), c is the speed of light ( 2.998 × 10 8 m/s ), and λ is the wavelength in m. If a visible light photon has a wavelength of 560.6 nm, what is the energy of the photon (in J)?
Given the wavelength of the visible light photon, the energy of the photon is 3.54 × 10⁻¹⁹J
Given the data in the question;
Wavelength of visible light; [tex]\lambda = 560.6 nm = 5.606*10^{-7}m[/tex]
Speed of light; [tex]c = 2.998 * 10^8 m/s[/tex]
Planck's constant; [tex]h = 6.626 * 10^{-34} J.s[/tex]
The energy and wavelength of light are related by the equation:
[tex]E = \frac{hc}{\lambda}[/tex]
Where E is energy of photon in Joules, h is Planck's constant, c is the speed of light and λ is the wavelength,
We substitute our given value into the equation
[tex]E = \frac{(6.626*10^{-34}J.s)(2.998*10^8m/s)}{5.606*10^{-7}m} \\\\E = \frac{(1.986*10^{-25}J.m}{5.606*10^{-7}m}\\\\E = 3.54 * 10^{-19}J[/tex]
Therefore, given the wavelength of the visible light photon, the energy of the photon is 3.54 × 10⁻¹⁹J
Learn more: https://brainly.com/question/14683743
Which situation will change the direction of the bicycle?
A. An added force of 20 N down the hill
B. Added forces of 30 N up the hill and 30 N down the hill
C. An added force of 20 N to the side of the hill
D. Added forces of 10 N up the hill and 30 N down the hill
Answer:
Dont know if this is right but i say C
Explanation:
Answer:
C. an added force of 20 N toward one side of the hill
Explanation:
I just took the quiz and got it correct./
5) Unlike the five big mass extinctions in the geological record, the current wave of extinctions is
caused by
A.
Human activity
В. Volcanism
C.
Sea level changes
D.
Changes in ocean chemistry
E Asteroid impact
Answer:
B.Volcanism
Explanation:
Cause every time the current wave moves is causes and eruption
Unlike the five big mass extinctions in the geological record, the current wave of extinctions is caused by the Volcanism. Thus, the correct option is B.
What is the cause of Mass extinction?A mass extinction event is also known as biotic crisis. It is a widespread and rapid decrease in the biodiversity on the Earth which could be due to various reasons. Such an extinction event is identified by a sharp change or decrease in the diversity and abundance of multicellular organisms in an area.
Past mass extinctions on this planet were caused due to extreme temperature changes, rise or fall in the sea levels and catastrophic events, one-off events like a huge volcano erupting or an asteroid hitting the Earth. The current wave of extinctions is caused by volcanism.
Therefore, the correct option is B.
Learn more about Mass extinctions here:
https://brainly.com/question/11872946
#SPJ6
Jupiter's Great Red Spot is
1.slowly shrinking
2.a large storm
3.smaller than Saturn's spot
4.a large area of liquid hydrogen
Answer:
2 : A large storm
Explanation: I hope this helps
The light waves transfer their oscillations and energy to other object in what way?
The frequency of the light waves physically causes the object to move
The energy of the light wave transfers to the electrons of the material which causes them to gain that energy
The wavelength of the light changes the velocity of the atoms in the material
The amplitude of the light will affect how much of it shines on the object
Answer: b the energy of light...
Explanation:
2. A 0.02 kg ball spins in a horizontal circle of radius 0.50 m with a frequency
of 4.0 Hz. What is the tension force in the string (the centripetal force on
the ball)?
Given:
Frequency, f = 4.0 HzMass, m = 0.02 kgRadius, r = 0.50 mWe know,
→ [tex]W = 2 \pi f[/tex]
By substituting the values,
[tex]= 2 \pi \times 4.0[/tex]
[tex]= 8 \pi \ rad/s[/tex]
hence,
→ [tex]T = m \omega^2 R[/tex]
[tex]= 0.02(8 \pi)^2 (0.50)[/tex]
[tex]= 6.31654 \ N[/tex]
or,
[tex]= 6.3 \ N[/tex]
Thus the answer above is right.
Learn more about tension force here:
https://brainly.com/question/13047328
A ball with a mass of 0.585 kg is initially at rest. It is struck by a second ball having a mass of 0.420 kg , initially moving with a velocity of 0.270 m/s toward the right along the x axis. After the collision, the 0.420 kg ball has a velocity of 0.220 m/s at an angle of 36.9 ∘ above the x axis in the first quadrant. Both balls move on a frictionless, horizontal surface.
Required:
a. What is the magnitude of the velocity of the 0.605kg ball after the collision?
b. What is the direction of the velocity of the 0.605kg ball after the collision?
c. What is the change in the total kinetic energy of the two balls as a result of the collision?
Answer:
a) [tex](v_1)=0.3989m/s[/tex]
b) [tex]\theta_1=80.5 \textdegree[/tex]
c) [tex]K.E=0.036J[/tex]
Explanation:
From the question we are told that:
Initial speed of 1st ball [tex]u_{1}=0 m/s[/tex]
Mass of 1st ball [tex]m_1=0.585kg[/tex]
Mass of 2nd ball [tex]m_2=0.420kg[/tex]
Initial speed of 2nd ball [tex]u_{2}=0.270 m/s[/tex]
Final speed of 2nd ball [tex]v_{2}=0.220 m/s[/tex]
Angle of collision [tex]\angle=36.9 \textdegree[/tex]
a)
Generally the equation for law of conservation is mathematically given by
[tex]m_1u_1+m_2u_2=m_1v_1^2+m_2v_2^2[/tex]
The final velocity [tex]v_1[/tex] is given as
[tex]0+(0.420)(0.270)=(0.585)(v_1)^2+(0.420)(0.220)^2[/tex]
[tex](v_1)^2=\frac{(0.420)(0.270)-(0.420)(0.220)^2}{0.585}[/tex]
[tex](v_1)^2=0.1591[/tex]
[tex](v_1)=0.3989m/s[/tex]
b)
Generally the equation for law of conservation is mathematically given by
[tex]m_1u_1+m_2u_2=m_1v_1cos\theta_1+m_2\theta_2[/tex]
[tex]0+(0.420)(0.270)=(0.585)(1.511)cos\theta_1+(0.420)(0.220)cos36 \textdegree[/tex]
[tex]cos\theta_1= \frac{(0.420)(0.270)-(0.420)(0.220)cos36 \textdegree}{(0.585)(0.3989)}[/tex]
[tex]cos\theta_1=0.1656[/tex]
[tex]\theta_1=80.5 \textdegree[/tex]
c)
Generally the equation for kinetic energy is mathematically given by
[tex]K.E=\frac{1}{2} mv^2[/tex]
1st Ball
[tex]K.E=\frac{1}{2} (0.585)(0.3989)^2[/tex]
[tex]K.E=0.0465J[/tex]
2nd ball
[tex]K.E=\frac{1}{2} (0.420)(0.220)^2[/tex]
[tex]K.E=0.101J[/tex]
Therefore the change in the total kinetic energy of the two balls as a result of the collision is
[tex]0.101-0.0465[/tex]
[tex]K.E=0.036J[/tex]
state and explain newton second law of motion also describe the concept of force, represent it quantiatively and derive the unit of force
this is a long question only answer if you know how to solve it you will be REWARDED with points
Explanation:
Newton's second law of motion states F=ma which means force is equal to mass multiplied by acceleration which in simple terms means If you give mass force it will accelerate the concept of force in physics is any interaction that when unopposed will change the motion of an object.
Can someone please help me with this one
Answer:
im pretty sure the answer is A. up but im not 100% sure
In a direct current motor, what is the result of the magnetic field acting on the wire
Answer:
Because the magnetic field created by the electric current in the wire is changing directions around the wire, it will repel both poles of the magnet by bending away from the wire.
Explanation:
Car headlights have both low beams and high beams. The high beams may be necessary when it is very dark outside. If the power for the high beam is 60.0 watts and the current is 5.0 amps, how much voltage is required?
A.
65 volts
B.
0.088 volts
C.
12 volts
D.
55 volts
Answer:
Voltage, V = 12 V.
Explanation :
It is given that,
The power for the high beam is, P = 60.0 watts
Current flowing, I = 5 A
Car headlights have both low beams and high beams. The high beams may be necessary when it is very dark outside.
So, the voltage required for the high beam is 12 V.