Answer:
[tex]M_{base}=0.488M[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to solve this problem by firstly writing the chemical reaction between hydrochloric acid and barium hydroxide:
[tex]2HCl+Ba(OH)_2\rightarrow BaCl_2+2H2_O[/tex]
It means there is 2:1 mole ratio of the acid to base, and we are able to write the following mole ratio, then written in terms of volumes and concentrations:
[tex]n_{acid}=2n_{base}[/tex]
Thus, we obtain the following:
[tex]M_{acid}V_{acid}=2M_{base}V_{base}[/tex]
Then, we solve for the concentration of the base and consequently plug in the given data to obtain:
[tex]M_{base}=\frac{M_{acid}V_{acid}}{2V_{base}} \\\\M_{base}=\frac{0.863M*37.2mL}{2*32.9mL}\\\\M_{base}=0.488M[/tex]
Regards!
Will give brainliest!
How does the melting of ice caps near the North Pole affect the salinity of the ocean?
Salinity decreases because freshwater flows into the ocean
Salinity increases because of the stored pockets of air and salt
Salinity increases because salt from the ice caps flows into the ocean
There is no change in the ocean’s salinity with this process
Answer:
A.
Explanation:
melting of ice will increase water in oceans due to which water in oceans will increase and salinity will decrease. hence, melting of ice caps near the north pole affects salinity of the ocean
How many molecules of Na2O are in 24.6g? Show work!
Answer:
Explanation:
Na2O has 2 atoms of Sodium and 1 atom of Oxygen
So, the molecular mass of Na2O is:
(2 x Atomic weight of Na) + (1 x Atomic weight of O)
Atomic weight of Na = 22.99 g
Atomic weight of O = 16 g
Therefore, Molecular Mass of Na2O = (2x 22.99g) + (1 x 16g)
= (45.98 + 16)g = 61.98 g
Therefore 61.98 g of Na2O contains 6 x 10^23 molecules (Avogadro's number).
24.6 g of Na2O therefore contains:
(24.6/61.98) x 6 x 10^23 = Answer!
H2 + O2 + H2O how do I balance this?
Explanation:
[tex]2H _{2(g)} + O _{2(g)}→2H _{2}O _{(l)}[/tex]
Insert 2 on Hydrogen then a 2 on water molecule.
please help me with this question !
Answer: i dont understand
Explanation:
Question
What is the name of this ben zene ?
the name of this benzene is benzene circle
if you also don't understand the go in this link
https://en.m.wikipedia.org/wiki/File:Benzene_circle.svg
plz give me brainliest+ thanks i need it to reach in expert : )
PLEASE HELP!
See picture
Answer:
See Explanation
Explanation:
The equation of the reaction;
KHSO4(aq) + KOH(aq) -------> K2SO4(aq) + H2O(l)
Number of moles of KHSO4 = 49.6 g/136.169 g/mol = 0.36 moles
Since the reaction is in a mole ratio of 1:1, 0.36 moles of K2SO4 is produced.
Number of moles of KOH = 25.3 g/56.1056 g/mol = 0.45 moles
Since the reaction is 1:1, 0.45 moles of K2SO4 is produced
Hence K2SO4 is the limiting reactant.
Mass of K2SO4 formed = 0.36 moles of K2SO4 * 174.26 g/mol = 62.7 g
So;
1 mole of KHSO4 reacts with 1 mole of KOH
0.36 moles of KHSO4 reacts with 0.36 * 1/1 = 0.36 moles of KOH
Amount of excess KOH = 0.45 moles - 0.36 moles = 0.09 moles
Mass of excess KOH = 0.09 moles * 56.1056 g/mol = 5 g of excess KOH
What is the concentration of a solution made by dissolving 0.99mol of acetic acid in enough water to make 0.58L of solution?
Answer:
[CH₃COOH] = 1.70 M
Explanation:
When we talk about concentration we can determine Molarity
Molarity determines the moles of solute that are contained in 1L of solution.
In this case our solute is the acetic acid.
M = mol/L
M = 0.99 mol /0.58L → 1.70 M
We can also make a rule of three
In 0.58 L of solution we have 0.99 moles of solute
In 1 L of solution we may have (1 . 0.99) / 0.58 = 1.70 moles
Acetic acid is a weak acid, partially dissociated in water.
CH₃COOH + H₂O ⇄ CH₃COO⁻ + H₃O⁺ Ka
Help please !!!!!!!!!!!!
the answer to your question is a increase
Which statement best describes why rate laws are important?
to see if a chemical reaction can actually take place
to determine how fast a chemical reaction will take place
to see how much heat energy a chemical reaction releases
to determine what products are formed in a chemical reaction
Answer:
B
Explanation:
Answer:
b. to determine how fast
Explanation:
edg 22
HELPPPPP A pearlfish spends the day inside the alimentary tract, or intestines, of a sea cucumber. The fish emerges from the sea cucumber at night to feed on small crustaceans. The pearlfish gets a safe place to live. The sea cucumber does not gain anything from the relationship, nor is it harmed. This is similar to the relationship between which of the following organisms?
A) Fox and bunnies, and lions and zebras.
B) Tapeworms in the gut of animals, and lice on the head of humans.
C) The barnacles that attach on whales and the shuckerfish that travel together with sharks.
D) Bees and plants or sea anemonies and clownfish.
Answer:
D) Bees and plants or sea anemonies and clownfish.
i think..
Explanation:
A pearlfish spends the day inside the alimentary tract, or intestines, of a sea cucumber. The fish emerges from the sea cucumber at night to feed on small crustaceans. The pearlfish gets a safe place to live. The sea cucumber does not gain anything from the relationship, nor is it harmed. This is similar to the relationship between bees and plants or sea anemonies and clownship and the correct option is option D.
What is symbiosis?Symbiosis is a close relationship between two species in which at least one species benefits.
For the other species, the relationship may be positive, negative, or neutral.
There are three basic types of symbiosis: mutualism, commensalism, and parasitism.
Mutualism is a symbiotic relationship in which both species benefit. Commensalism is a symbiotic relationship in which one species benefits while the other species is not affected.
One species typically uses the other for a purpose other than food. Parasitism is a symbiotic relationship in which one species (the parasite) benefits while the other species (the host) is harmed.
Therefore, a pearlfish spends the day inside the alimentary tract, or intestines, of a sea cucumber. The fish emerges from the sea cucumber at night to feed on small crustaceans. The pearlfish gets a safe place to live. The sea cucumber does not gain anything from the relationship, nor is it harmed. This is similar to the relationship between bees and plants or sea anemonies and clownship and the correct option is option D.
Learn more about Symbiosis, here:
https://brainly.com/question/3350498
#SPJ3
You're provided a 0.50 M solution of HCl. How many moles of HCl are present in 25 ml of this solution?
Answer:
0.0125 moles of HCl
Explanation:
(0.50 mol/L)(0.025 L) = 0.0125 moles of HCl
in what group and periods is most reactive metals
given a mixture of lead to oxide ammonium chloride and sodium chloride describe how a mixture can be separated to obtain a sample each
Answer:
There are way in separating mixtures of chloride salts such as that of sodium chloride and ammonium chloride. It can be done by crystallization, filtration, and sublimation. The easiest method among the three is separation by sublimation.
How much energy (in KJ) is needed to melt 15g of ice at -4oC and raise it to a temperature of 115oC? Round the closest number, and include units
Answer:
The energy needed is 45.7659 kJ
Explanation:
The given mass of the ice, m = 15 g
The initial temperature of the ice, T₁ = -4°C
The temperature
The final temperature, T₂ = 115°C
The specific heat capacity of ice, c₁ = 2.09 J/(g·°C)
The latent heat of ice, l₁ = 334 J/g
The heat capacity of water, c₂ = 4.184 J/(g·°C)
The latent heat of vaporization, l₂ = 2260 J/g
The specific heat of steam, c₃ = 2.02 J/g
Therefore, we get the energy needed, ΔQ, as follows;
ΔQ = m·c₁·(T₂ - Tₐ) + m·l₁ + m·c₂(Tₓ - Tₐ) + m·l₂ + m·c₃·(T₂ - Tₓ)
Where;
Tₐ = The melting point temperature of water = 0°C
Tₓ = The boiling point temperature of water = 100°C
∴ ΔQ = 15×2.09×(0 - (-4)) + 15 × 334 + 15×4.184×(100 - 0) + 15×2260 + 15×2.02×(115 - 100) = 45,765.9
The energy needed, ΔQ = 45,765.9 J = 45.7659 kJ.
HELP ME WITH THIS PLSSSSS
Answer:Predatorrrrrrrrrrrrrrrr
Pls gimme Brainliest
What are the materials that good conductors and insulators?
Conductors
Silver
Gold
Copper
Aluminum
Mercury
Steel
Iron
Seawater
Concrete
Mercury
___________________
insulators
Aluminum foil
Glass
Air
Plastic
Rubber
Porcelain
Wood
Please help I will mark you brainiest
What are one advantage and one disadvantage of sexual reproduction?
What is one advantage and one disadvantage of asexual reproduction?
Answer:asexual- Energy is not required to find a mate. Offspring are genetic clones. A negative mutation can make asexually produced organisms susceptible to disease and can destroy large numbers of offspring. Some methods of asexual reproduction produce offspring that are close together and compete for food and space.
Explanation:During sexual reproduction the genetic material of two individuals is combined to produce genetically diverse offspring that differ from their parents.
Potassium hydrogen phthalate, KHP, is used as a primary standard for determining the concentration of a solution of NaOH by titration. If the KHP has not been dried before weighing, the calculated molarity of the NaOH would be
A) higher than the actual value, since water is included in the apparent mass of KHP
B) higher than the actual value, since the presence of water requires a larger volume of titrant
C) lower than the actual value, since NaOH absorbs water
D) unaffected, since KHP is a strong acid
E) unaffected, since water is routinely added before the titration
Answer:A
Explanation:
If the KHP has not been dried before weighing, the calculated molarity of the NaOH would be higher than the actual value, since water is included in the apparent mass of KHP.
The KHP is Potassium hydrogen phthalate. It is commonly used as a primary standard in pure form for sodium hydroxide titrations because it is stable in air making it easy to weigh.
However, if KHP is not dried very well, the mass of water is included as part of the mass of KHP and this will make calculated molarity of KHP to be higher than the actual value.
Again, the reaction between KHP and NaOH has a 1:1 molar ratio so if the molarity of KHP is higher than its actual value, the molarity of the NaOH would also be higher than the actual value.
Learn more: https://brainly.com/question/17134477
HURRY!!!
What can you infer about the growth of the seed represented in the graphs below?
Answer:
B
Explanation:
Which would require less energy, moving two particles of the same charge together, or moving two particles of opposite charge close together? Why? (Explain)
Answer:
Moving two particles of the opposite charge close together.
Explanation:
Think about it.
Opposites attract.
When you attempt to move particles with the same charges, a force is created.
The initial temperature of a reaction is 24.7 °C. The temperature decreases by 3.2 °C. What is the new temperature of the reaction? Someone help
Answer:
I think it's 21.5 *C
Explanation:
hola estoy aburrido alguien para hablar
Answer:
yoooo si se puede jejeje
Explanation:
Answer:
Explanation:
hola como esta yo tan biene es aburrido
What do sex hormones do?
Answer:
Hormones help regulate many bodily processes, such as appetite, sleep, and growth. Sex hormones are those that play an essential role in sexual development and reproduction. The main glands that produce sex hormones are the adrenal glands and the gonads, which include the ovaries in females and testes in males
Explanation:
How many moles are in 9 grams of water
I'm timed! Select the STEM-related activities performed in the fashion industry.
garment weaving
market analysis
pattern making
fabric dyeing
product promotion
product advertising
Answer:
All of them I think
Explanation:
STEM is science, technology, engineering and math, and all of them use that in some aspect
Using the terms "breaking and making bonds", explain the net energy change for the chemical reaction
between water and ammonium nitrate.
Read the given expression.
Effective nuclear charge = atomic number - x
Which of the following explains the identity of X and its trends across a period? (5 points)
X is the screening constant, and it increases across a period.
X is the screening constant, and it remains constant across a period.
X is the number of outermost electrons, and it increases across a period.
X is the number of outermost electrons, and it remains constant across a period.
Answer:
Option 2: X is the screening constant, & it remains constant across a period.
Explanation:
I took the test and got the question correct :)
As we move across the period, X is the screening constant, and it remains constant across a period.
As we move across the period, the size of atoms become smaller because of an increase in the size of the nuclear charge. This leads to a decrease in atomic radius.
As the size of atom decreases, the screening effect on the outermost electron decreases accordingly. Hence, as we move across the period, X is the screening constant, and it remains constant across a period. This is because, no new shells are added across the period.
Learn more: https://brainly.com/question/1248133
An object has an actual mass of 34.85 grams. Johnny measures the object to have a mass of 35 grams after rounding. What is Johnny's percent error of the object?
Answer:
1.15.........................
I NEED THIS ASAP Someone please help me
Read the chemical equation. 2NaOH + H2SO4 → Na2SO4 + 2H2O Which of the following statements would be correct if four moles of NaOH were used in this reaction?
A. Two moles of water were produced from this reaction.
B. Four moles of water were produced from this reaction.
C. One mole of H2SO4 was used in this reaction.
D. Eight moles of H2SO4 were used in this reaction.
Answer:
the answer is B
Explanation:
Answer: B!
Explanation:
B. Four moles of water were produced from this reaction.
got it right on the test :-)
The tapir and agouti are ___________ found in the Amazon Rainforest.
A.Carnivores
B.Omnivores
C. Herbivores
D. Decomposers
"science"
HELP!!!!!What is the molar mass of a gas which has a density of .249 g/L at 20.0 degrees Celsius and a pressure of .95 atm?
Answer:
6.31g/mol
Explanation:
Using the ideal gas equation;
PV = nRT
Where;
P = pressure (atm)
V = volume (L)
n = number of moles (mol)
R = gas law constant (0.0821 Latm/molK)
T = temperature (K)
Mole (n) = mass (m)/molar mass (Mm)
* Mm = m/n
Also, density (p) = mass (m) ÷ volume (V)
PV = nRT
Since n = M/Mm
PV = M/Mm. RT
PV × Mm = m × RT
Divide both sides by V
P × Mm = m/V × RT
Since p = m/V
P × Mm = p × RT
Mm = p × RT/P
Mm = 0.249 × 0.0821 × 293/0.95
Mm = 5.989 ÷ 0.95
Mm = 6.31g/mol