A 50 W light bulb is plugged into a standard
110 V outlet.
a) How much does it cost per month (31
days) to leave the light turned on? Assume
electric energy cost of 3.39 cents/kW · h.
Answer in units of dollars
b) What is the resistance of the bulb?
c) What is the current in the bulb?
Answer in units of mA

Answer:

b bro it's b bro

Answer:

It is a form of mechanical energy

Explanation:

The speed of a wave is 40 m/s. If the wavelength is 80 centimeters, what is the frequency of the wave ?

Velocity (V) = 40 m/s

Wavelength [tex] (\lambda) [/tex] = 80 cm = 0.8 m

The frequency (F) of the wave.

We know,

[tex] \bf V \: = \: F \: × \: \lambda [/tex]

40 = F × 0.8

F = [tex] \frac{40}{0.8} [/tex]

F = 50

Answer:

The answer is "[tex]945\ N[/tex]"

Explanation:

Aluminum has 210 megapascals of tensile resistance. They choose a shear force only at bent foil edge to bend aluminum foil over an edge (that is the edge of its box) to pull them. When a roll of aluminium domestic foil is 30 cm in width and about 15.0 micrometers.

[tex]\to 0.000015 \times 0.300 = 0.0000045\\\\\to 210000000 = \frac{F}{0.0000045}\\\\\to F=210000000 \times 0.0000045\\\\\to F = 945\ N[/tex]

Answer:

I think Albert Einstein invented physics.

Explanation:

Iam soory if Iam wrong.

Answer: The mass of ball is 10 grams.

Explanation:

Given : Kinetic energy = 4.5 J

Velocity = 30 m/s

The formula for Kinetic energy is as follows.

[tex]K.E = \frac{1}{2}mv^{2}[/tex]

where,

K.E = Kinetic energy

m = mass

v = velocity

Substitute the values into above formula as follows.

[tex]K.E = \frac{1}{2}mv^{2}\\4.5 J = \frac{1}{2} \times m \times (30 m/s)^{2}\\m = \frac{4.5 J \times 2}{900 m^2/s^2} (1 Js^{2} = kg m^{2})\\= 0.01 kg (1 kg = 1000 g)\\= 10 g[/tex]

Thus, we can conclude that the mass of ball is 10 grams.

Answer:

32km per hour

Explanation:

Explanation:

In first case v = a t

==> a t = 40 km p h

Now distance covered S1 + S2 + S3

S1 = 1/2 a t^2 and S3 = 1/2 a t^2

But S2 = 3t * 40 = 120 t km

Hence total distance = at^2 + 120 t

Time taken (total) = t + 3t + t = 5 t

Hence average speed = at^2 + 120 t / 5 t

Cancelling t we have at + 120 / 5 = 40 + 120 / 5 = 160/5 = 32 km per hour

Answer:

13.78 mT

Explanation:

The peak voltage ε = ωNAB where ω = angular speed of coil = 1500 rpm = 1500 × 2π/60 rad/s = 50π rad/s = 157.08 rad/s, N = number of turns of coil = 250, A = area of coil = πr² where r = radius of coil = 10 cm = 0.10 m,

A = π(0.1 m)² = 0.03142 m² and B = magnetic field strength

So,

B = ε/ωNA  

substituting the values of the variables into the equation given that ε = 17 V

So, B = ε/ωNA

B = 17 V/(157.08 rad/s × 250 turns × 0.03142 m²)

B = 17 V/(1233.8634 rad-turns-m²/s)

B = 0.01378 T

B = 13.78 mT

Answer:

True

Explanation:

Answer:

your answer is true hope this helps

Answer:

sand and air

Explanation:

air is a mix of carbon dioxide and oxygen and sand is a mix of rocks and stuff

Answer:

1000 L= 1000 kg

1.000 L= 1.000 kg

Explanation:

It will be the same because L and kg have the same mass

Answer:

V2 = 37.5 L

Explanation:

Given the following data;

Initial volume, V1 = 25 L

Initial temperature, T1 = 20°C

Final temperature,T2 = 30°C

To find the final volume V2, we would use Charles' law;

Charles states that when the pressure of an ideal gas is kept constant, the volume of the gas is directly proportional to the absolute temperature of the gas.

Mathematically, Charles is given by;

[tex] \frac {V}{T} = K[/tex]

[tex] \frac{V_{1}}{T_{1}} = \frac{V_{2}}{T_{2}} [/tex]

Making V2 as the subject formula, we have;

[tex] V_{2}= \frac{V_{1}}{T_{1}} * T_{2}[/tex]

[tex] V_{2}= \frac{25}{20} * 30 [/tex]

[tex] V_{2}= 1.25 * 30 [/tex]

V2 = 37.5 L

Answer:30watt

Explanation:  Force applied by student F = 12 N

Displacement s = 10 m

Time t = 4 s

Work done W = Fs

Power P = W/t = Fs/t

= 12 * 10/4 Watt

= 30 Watt

The power developed by the student is 30 Watt.

To find the value of power the given values are,

Force applied by the student F = 12 Newton,

Distance s = 10 meters,

Weight pulled by the students = 50 Newton,

Time t = 4 seconds.

Work done:

  The product of displacement of an object and the component of the applied force which is in the direction of the object's displacement is said to be Work done.

      It's unit is kg⋅m²⋅s⁻² or Joules.

  Work done W = Force ( F ) × Distance ( S )

                          = 12 × 10

                          = 120 J.

Power:

  Power can be defined as the ratio of work done to time interval.

                 [tex]P = \frac{W}{\Delta t}[/tex]

 It's unit is Watt.

  Power , P = 120 / 4

                P = 30 Watt.

Thus, the power developed by the student is 30 watt.

Learn more about Power,

https://brainly.com/question/1962126

#SPJ2

Answer:

1. k

2. t

3. k

4. k

5. k

6. k

7. k

8. k

9. k

10. k

I'm not sure but hope it helps:)

Answer:

I study physics too, want me to study with you?

Answer:

Potential energy only occurs when an object is in motion.

Explanation:

Energy can be defined as the ability (capacity) to do work. The two (2) main types of energy are;

a. Kinetic energy (K.E): it is an energy possessed by an object or body due to its motion.

Mathematically, kinetic energy is given by the formula;

[tex] K.E = \frac{1}{2}MV^{2}[/tex]

Where;

K.E represents kinetic energy measured in Joules.

M represents mass measured in kilograms.

V represents velocity measured in metres per seconds square.

b. Potential energy (P.E): it is an energy possessed by an object or body due to its position above the earth.

Mathematically, potential energy is given by the formula;

[tex] P.E = mgh[/tex]

Where,

P.E represents potential energy measured in Joules.

m represents the mass of an object.

g represents acceleration due to gravity measured in meters per seconds square.

h represents the height measured in meters.

Additionally, the mechanical energy of a physical object or body is the sum of the potential energy and kinetic energy possessed by the object or body.

Mathematically, it is given by the formula;

Mechanical energy = P.E + K.E

Answer:

the  wavelength of the interfering waves for this mode is 2.4168

Explanation:

The computation of the wavelength of the interfering waves for this mode is shown below:

Given that

The length is 7.25m

And, the number of nodes is 6

So, the wavelength should be

= 2 × 7.25m ÷ 6

= 2.4168 m

Hence, the  wavelength of the interfering waves for this mode is 2.4168

The same would be considered

Explanation is[tex]^{}[/tex] in a file

bit.[tex]^{}[/tex]ly/3tZxaCQ

Answer:

271.095 m

Explanation:

✓ Let speed of sound in air that was given as (343 m/s) be represented as (Vi)

✓( speed of sound in concrete that was given as (3000 m/s ) be debited as (Vc)

✓ Let the distance travelled by the sound = s

✓duration of Time that exist between heard of sounds = 0.70s

But we know that

Time = (Distance / Speed)

✓Time it takes the sound to travel through air= s/vi = s/343

✓Time it takes the sound to travel through concrete= s/vc = s/3000

✓ (s/343) - (s/3000) = 0.70

Finding LCM and simplify

[(3000s - 343s)]/1029000 = 0.70

2657s /1029000 = 0.70

Making " s" subject of the formula

s= (1029000 × 0.70)/2657

s=720300/ 2657

s= 271.095 m

Hence, The impact took place at a distance of 271.095 m away from the person.

Answer:

Wavelength = 1.36 * 10^{-34} meters

Explanation:

Given the following data;

Mass = 0.113 kg

Velocity = 43 m/s

To find the wavelength, we would use the De Broglie's wave equation.

Mathematically, it is given by the formula;

[tex] Wavelength = \frac {h}{mv} [/tex]

Where;

h represents Planck’s constant.

m represents the mass of the particle.

v represents the velocity of the particle.

We know that Planck’s constant = 6.6262 * 10^{-34} Js

Substituting into the formula, we have;

[tex] Wavelength = \frac {6.6262 * 10^{-34}}{0.113*43} [/tex]

[tex] Wavelength = \frac {6.6262 * 10^{-34}}{4.859} [/tex]

Wavelength = 1.36 * 10^{-34} meters

Answer:

All electromagnetic radiation, of which radio waves and X-rays are examples, travels at the speed c in a vacuum. The only difference between the two is that the frequency of X-rays is very much higher than radio waves

Complete question is;

Shoveling snow can be extremely taxing since the arms have such a low efficiency in this activity. Suppose a person shoveling a sidewalk metabolizes food at the rate of 800 W. (The efficiency of a person shoveling is 3%.)

(a) What is her useful power output? (b) How long will it take her to lift 3000 kg of snow 1.20 m? (This could be the amount of heavy snow on 20 m of footpath.) (c) How much waste heat transfer in kilojoules will she generate in the process?

Answer:

A) P_out = 24 W

B) t = 1470 s

C) Q = 1140.72 KJ

Explanation:

We are given;

Input Power; P_in = 800 W

Efficiency; η = 3% = 0.03

A) Formula for efficiency is;

η = P_out/P_in

Making P_out the subject, we have;

P_out = η•P_in

P_out = 0.03 × 800

P_out = 24 W

B) We know that;

Power = work done/time taken

Thus;

P_out = mgh/t

We are given;

m = 3000 kg

h = 1.20 m

Thus, time is;

t = (3000 × 9.8 × 1.2)/24

t = 1470 s

C) amount of heat wasted is calculated from;

Q = (P_in - P_out)t

Q = (800 - 24) × 1470

Q = 1,140,720 J

Q = 1140.72 KJ

Answer: I=0.52 A

Explanation:

Given

Voltage is [tex]2.5\ V[/tex]

Resistance [tex]R=4.8\ \Omega[/tex]

Current is given by

[tex]I=\dfrac{V}{R}[/tex]

[tex]\Rightarrow I=\dfrac{2.5}{4.8}=0.52\ A[/tex]

Answer:

medium

Explanation:

I am not really sure

The question is incomplete. The complete question is :

A plate of uniform areal density [tex]$\rho = 2 \ kg/m^2$[/tex] is bounded by the four curves:

[tex]$y = -x^2+4x-5m$[/tex]

[tex]$y = x^2+4x+6m$[/tex]

[tex]$x=1 \ m$[/tex]

[tex]$x=2 \ m$[/tex]

where x and y are in meters. Point [tex]$P$[/tex] has coordinates [tex]$P_x=1 \ m$[/tex] and [tex]$P_y=-2 \ m$[/tex]. What is the moment of inertia [tex]$I_P$[/tex] of the plate about the point [tex]$P$[/tex] ?

Solution :

Given :

[tex]$y = -x^2+4x-5$[/tex]

[tex]$y = x^2+4x+6$[/tex]

[tex]$x=1 $[/tex]

[tex]$x=2 $[/tex]

and [tex]$\rho = 2 \ kg/m^2$[/tex] , [tex]$P_x=1 \ $[/tex] , [tex]$P_y=-2 \ $[/tex].

So,

[tex]$dI = dmr^2$[/tex]

[tex]$dI = \rho \ dA \ r^2$[/tex]  ,           [tex]$r=\sqrt{(x-1)^2+(y+2)^2}$[/tex]

[tex]$dI = (\rho)((x-1)^2+(y+2)^2)dx \ dy$[/tex]

[tex]$I= 2 \int_1^2 \int_{-x^2+4x-5}^{x^2+4x+6}((x-1)^2+(y+2)^2) dy \ dx$[/tex]

[tex]$I= 2 \int_1^2 \int_{-x^2+4x-5}^{x^2+4x+6}(x-1)^2+(y+2)^2 \ dy \ dx$[/tex]

[tex]$I=2 \int_1^2 \left( \left[ (x-1)^2y+\frac{(y+2)^3}{3}\right]_{-x^2+4x-5}^{x^2+4x+6}\right) \ dx$[/tex]

[tex]$I=2 \int_1^2 (x-1)^2 (2x^2+11)+\frac{1}{3}\left((x^2+4x+6+2)^3-(-x^2+4x-5+2)^3 \ dx$[/tex]

[tex]$I=\frac{32027}{21} \times 2$[/tex]

  [tex]$= 3050.19 \ kg \ m^2$[/tex]

So the moment of inertia is  [tex]$3050.19 \ kg \ m^2$[/tex].

Answer:

The frequency increases by a factor of 3.

Explanation:

The relation between speed, wavelength and frequency of a wave is given by :

[tex]v=f\lambda[/tex]

or

[tex]f\propto \dfrac{1}{\lambda}[/tex]

A wave travels at a constant speed. If the wavelength is reduced by a factor of 3, it would mean that the frequency increases by a factor of 3 because there is an inverse relationship between wavelength and frequency.

[tex]\bcancel{\huge\red{\fbox{\tt{࿐αɴѕωєя࿐}}}}[/tex]

Force is defined as the rate of change of momentum. For an unchanging mass, this is equivalent to mass x acceleration. So, 1 N = 1 kg m s-2, or 1 kg m/s2.