a 550-g ball traveling at 8.0 m/s undergoes a sudden head-on elastic collision with a 250-g ball traveling toward it also at 8.0 m/s. what is the speed of the 250-g mass just after the collision?

The maximum torque on the wire is 0.1306 Nm.

Hi, I'd be happy to help you with your question. To find the maximum torque on a wire formed into a circle with a diameter of 10.9 cm, placed in a uniform magnetic field of 2.80 mT, and carrying a current of 5.00 A, follow these steps:

1. Calculate the radius of the circle:
Radius = Diameter / 2 = 10.9 cm / 2 = 5.45 cm = 0.0545 m (converted to meters)

2. Calculate the area of the circle:
Area = π * Radius^2 = π * (0.0545 m)^2 = 0.00933 m^2

3. Convert the magnetic field from millitesla (mT) to tesla (T):
Magnetic Field = 2.80 mT = 0.00280 T

4. Calculate the maximum torque on the wire:
Torque = (Current * Area * Magnetic Field) * sin(θ)
Since we need to find the maximum torque, we will use sin(θ) = 1:
Torque = (5.00 A * 0.00933 m^2 * 0.00280 T) * 1 = 0.1306 Nm

The maximum torque on the wire is 0.1306 Nm.

Learn more about torque

brainly.com/question/25708791

#SPJ11

Escape velocity is the minimum speed required for an object to escape the gravitational pull of a celestial body. It depends on the mass and radius of the celestial body, as well as the temperature and mass of the gas molecules in the atmosphere.

Based on a plot of escape velocity versus atmospheric temperature, we can see that lighter gases such as hydrogen and helium require lower escape velocities, while heavier gases such as nitrogen and oxygen require higher escape velocities. The plot also shows that the escape velocity decreases as the temperature of the gas increases.

Mars has a relatively low escape velocity compared to Earth, which means that lighter gases such as hydrogen and helium are more likely to escape into space. This suggests that Mars' atmosphere should retain heavier gases such as nitrogen and oxygen, which have higher escape velocities and are less likely to escape into space due to their mass. Therefore, it is likely that Mars' atmosphere is rich in heavier gases, which is consistent with current observations.

Learn more about celestial bod

https://brainly.com/question/28876984

#SPJ4

Zach's weight before the elevator starts braking is 833 Newton.

Identifying Zach's weight is necessary to prevent the braking of the lift in which he is now riding. Zach is 85 kg in weight and the lift is dropping at 11 m/s.

The first floor is reached after 2.5 seconds of braking by the elevator. We employ the weight formula—which is the sum of mass and gravity—to solve the issue.

Zach's weight can be determined by dividing his mass of 85 kg by the gravitational acceleration, which equals about 9.8 m/s2. This results in an 833 Newton weight before the lift begins to brake.

Learn more about weight:

https://brainly.com/question/30176113

#SPJ4

The correct answer is "applying the brakes cause a change in the air pressure in the car."

The definition of momentum is "mass in motion." Since every item has mass, if it is moving, it must have momentum because its mass is in motion. The amount of motion and the speed of the motion are the two factors that determine how much momentum an item possesses.

When the brakes are applied, the car's momentum is slowed down, causing the air inside the car to move forward. This change in air pressure pushes loose objects, such as groceries and books, towards the front of the car. The force of the car seats pushing the objects forward and the objects already being in motion with the moving car are not the main reasons for this phenomenon.

More on brakes: https://brainly.com/question/8405906

#SPJ11

A comet's tail points after its closest approach to the Sun:

When a comet approaches the Sun, the heat causes some of its frozen gases and ices to vaporize, creating a cloud of gas and dust around the nucleus of the comet.

The solar wind, which is a stream of charged particles constantly flowing out from the Sun, interacts with the gas and dust in the comet's atmosphere and pushes it away from the Sun.

The direction of the solar wind is generally outward from the Sun, so the gas and dust in the comet's tail is pushed in the opposite direction, away from the Sun.

The direction of the tail, therefore, is always away from the Sun, regardless of the position or motion of the comet.

Therefore, the correct answer is not among the options provided, but if we assume that the question is asking about the direction of the tail relative to the comet's direction of motion, the answer would be B) behind its direction of motion.

To know more about comet's :

https://brainly.com/question/28543341

#SPJ11

Sandra expended 1376.256 kcal of caloric expenditure averaging an oxygen consumption rate of 38.4 ml/kg/min over her 30-minute work interval.

Weight = 71.8 kg

oxygen consumption rate = 38.4 ml/kg/min

Time = 30-minute

To calculate caloric expenditure of Sandra, the formula required is as:

Caloric expenditure = oxygen consumption rate x weight (kg) x time x 5

Caloric expenditure = oxygen consumption rate x weight x time x 5

Caloric expenditure = 38.4 ml/kg/min x 71.8 kg x 30 min x 5

Caloric expenditure = 275.2512 L

Assume that 1 L of oxygen consumed corresponds to 5 kcal of energy expended,

Caloric expenditure = 275.2512 L x 5 kcal/L

Caloric expenditure = 1376.256 kcal

Therefore, we can conclude that Sandra expended 1376.256 kcal during her 30-minute work interval.

To learn more about caloric expenditure

https://brainly.com/question/3185717

#SPJ4

The gravitational potential energy of the block is converted into kinetic energy as it falls. This kinetic energy is transferred to the pulley, causing it to rotate.

The torque generated by falling block causes an angular acceleration in the pulley, which leads to an increase in its angular speed. To obtain solution, we can use the formula for conservation of energy, which is given by mgh = (1/2)(m+I/R^2)v^2, where m is mass of the block, g is the acceleration due to gravity, h is the height from which the block falls, I is the moment of inertia of the pulley, R is the radius of the pulley, and v is the final velocity of the block and pulley system.

To know more about acceleration, here

brainly.com/question/12550364

#SPJ4

To determine the magnitude of the horizontal force acting on the sprinter, we would need more information such as the sprinter's mass and acceleration. However, I can guide you on how to find it using these terms once you have the necessary information:

1. Mass (m): The mass of the sprinter, typically expressed in kilograms (kg).
2. Acceleration (a): The sprinter's horizontal acceleration, usually in meters per second squared (m/s²).
3. Force (F): The horizontal force acting on the sprinter, which we are trying to find. This is measured in Newtons (N).

To find the magnitude of the horizontal force (F), use Newton's second law of motion:

F = m * a

Once you have the sprinter's mass and acceleration, plug in the values and calculate the force. Express your answer in Newtons (N).
To know more about Newton's second law of motion:

https://brainly.com/question/27712854

#SPJ11

The speed of the proton relative to the accelerator is approximately 0.82 times the speed of light.

In the special theory of relativity, the total energy of a particle can be expressed as the sum of its rest energy and its kinetic energy. If a proton in a certain particle accelerator has a kinetic energy that is equal to its rest energy, then its total energy is twice its rest energy, i.e.,

[tex]E_total^2 = (pc)^2 + (mc^2)^2[/tex]

where m is the rest mass of the proton and c is the speed of light.

According to the relativistic energy-momentum relation, the total energy of a particle is related to its momentum and rest mass by the equation:

[tex]E_total^2 = (pc)^2 + (mc^2)^2[/tex]

where p is the momentum of the particle.

Substituting the expression for the total energy of the proton in terms of its rest mass and the speed of light, we get:

[tex](2mc^2)^2 = (pc)^2 + (mc^2)^2[/tex]

Simplifying, we get:

[tex]4m^2c^4 = p^2c^2 + m^2c^4[/tex]

Rearranging and simplifying further, we get:

p = mc * sqrt(3)

Therefore, the momentum of the proton is mc times the square root of 3. Since the speed of the proton is related to its momentum by the equation:

[tex]p = mv / sqrt(1 - v^2/c^2)[/tex]

where v is the speed of the proton relative to the accelerator, we can solve for v to get:

[tex]v = c * sqrt(1 - 1/3) = c * sqrt(2/3)[/tex]

Therefore, the speed of the proton relative to the accelerator is approximately 0.82 times the speed of light.

Learn more about The speed

https://brainly.com/question/28224010

#SPJ4

The speed of the proton relative to the accelerator is 2.19 x 10⁸ m/s. in a certain particle accelerator, a proton has a kinetic energy that is equal to its rest energy.

Based on the given information, we can use the formula for kinetic energy:
KE = (1/2)mv²
where KE is the kinetic energy, m is the mass of the proton, and v is its velocity.
Since the proton's kinetic energy is equal to its rest energy (mc²), we can set the two equations equal to each other:
mc² = (1/2)mv²
Simplifying this equation, we can cancel out the mass on both sides:
c² = (1/2)v²
Solving for v, we can take the square root of both sides:
v = √(2c²)
Plugging in the value for the speed of light (c = 3.00 x 10⁸ m/s), we get:
v = √(2 x (3.00 x 10⁸)²)
v = 2.19 x 10⁸ m/s

To learn more about Proton Here:

https://brainly.com/question/30895149

#SPJ11

When an electrical current passes through a resistor, energy is dissipated, and the rate at which this energy is dissipated is the power, which is given by. [tex]P = i^{2} 2R[/tex] The amount of electricity passing through the resistor is determined by the current.

In the scenario described, when the switch is closed, the current prefers to travel through the short circuit wire rather than through bulb B, which causes no current to flow through bulb B. Since there is no current passing through bulb B, it does not receive any electrical energy and goes out.

On the other hand, all the current flows through bulb A, and thus, it receives more electrical energy, resulting in it getting brighter. This happens because the power dissipated by the resistor is proportional to the square of the current, and since all the current flows through bulb A, it receives more power and gets brighter.

In summary, the current passing through the resistor determines the amount of electricity passing through it, and the distribution of this current through different paths can result in some bulbs getting brighter, some getting dimmer, or even going out.

To know more about light bulb:

https://brainly.com/question/29107702

#SPJ4

Electrons spend most of their time close to the nucleus because they are attracted to the positively charged protons in the nucleus by the electromagnetic force.

This force causes the electrons to move in an orbit around the nucleus, much like planets orbiting around the sun.

The closer an electron is to the nucleus, the stronger the attractive force between them. This results in the electrons being tightly bound to the nucleus, and they tend to spend most of their time in the lowest energy level, known as the ground state. In this state, the electrons are as close to the nucleus as possible, which is why they spend most of their time in that region.

To know more about electromagnetic force, here

brainly.com/question/13191643

#SPJ4

The spring constant of the spring is 3.00N/m. Therefore option 3 is correct.

To find the spring constant, we can use Hooke's Law, which states that the force exerted by a spring is directly proportional to the displacement of the spring from its equilibrium position.

The formula for Hooke's Law is F = kx, where F is the force, k is the spring constant, and x is the displacement.

In this case, we are given that compressing the spring by 0.500m causes a force of 1.50N. Using the formula F = kx, we can substitute the values:

1.50N = k * 0.500m

To find the value of k, we can rearrange the equation:

k = F / x

k = 1.50N / 0.500m

k = 3.00N/m

Therefore, the spring constant of the spring is 3.00N/m, which corresponds to option 3.

Know more about Hooke's Law:

https://brainly.com/question/30379950

#SPJ2

The speed of light is 2.046 * 10^8 m/s, speed of a standing em wave in a certain material that has frequency 2.20 *10^10 Hz and the nodal planes of the magnetic field are 4.65 mm apart.

To find the speed of light in the material, we can use the given frequency and the distance between the nodal planes.

1. First, let's recall that the wavelength (λ) of an electromagnetic wave is twice the distance between the nodal planes (since a full wavelength includes a crest and a trough). In this case, the distance between nodal planes is 4.65 mm, so the wavelength is:

  λ = 2 * 4.65 mm = 9.3 mm

2. Convert the wavelength to meters:

  λ = 9.3 mm * (1 m / 1000 mm) = 0.0093 m

3. We are given the frequency (f) of the wave:

  f = 2.20 * 10^10 Hz

4. Next, we can use the wave equation to find the speed of light (c) in the material:

  c = λ * f

5. Plug in the values for λ and f:

  c = 0.0093 m * (2.20 * 10^10 Hz) = 2.046 * 10^8 m/s

So, the speed of light in the material is 2.046 * 10^8 m/s.

More on wave and speed: https://brainly.com/question/31486100

#SPJ11

Baffles are flat plates or bars that are placed inside a shell-and-tube heat exchanger to promote turbulence and enhance heat transfer. The baffles create a series of parallel flow paths, forcing the fluid to change direction several times as it flows through the heat exchanger.

This results in an increase in the heat transfer coefficient by promoting better mixing and reducing the thickness of the thermal boundary layer.

The presence of baffles increases the pressure drop across the heat exchanger, which in turn increases the pumping power requirements. However, the increase in heat transfer coefficient outweighs the increase in pressure drop, resulting in an overall improvement in the heat transfer efficiency of the heat exchanger. The baffles also serve to support the tubes and prevent damage from tube vibration, which can occur in the absence of baffles.

The selection and design of baffles are critical to the performance of a shell-and-tube heat exchanger. The spacing, angle, and number of baffles must be carefully considered to optimize the heat transfer rate and minimize the pumping power requirements.

To learn more about baffles

https://brainly.com/question/30496310

#SPJ4

A mechanical wave is a wave that requires a medium to travel through, such as sound waves or water waves. In everyday life, we experience mechanical waves when we hear sounds or see water waves in a pond.

Transverse Wave: A transverse wave is a wave that vibrates perpendicular to the direction of wave propagation, such as light waves or radio waves.

We use transverse waves every day when we use our phones to receive radio waves.

Longitudinal Wave: A longitudinal wave is a wave that vibrates parallel to the direction of wave propagation, such as sound waves or seismic waves.

We hear sound through longitudinal waves, and we feel earthquakes through seismic waves.

Wave Speed: Wave speed is the speed with which a wave propagates via a particular medium.

When we watch a wave on the beach, we can estimate the wave speed by observing how fast it moves across the sand.

Wavelength: Wavelength is the distance between two corresponding points on a wave, such as the distance between two crests.

We can measure the wavelength of light using a spectroscope.

Frequency: Frequency is the number of waves that pass a given point in a given amount of time, such as the number of waves passing a fixed point in one second.

We use frequency to measure the pitch of sound or the radio frequency of a station.

Amplitude: Amplitude is the maximum displacement of a wave from its resting position, such as the height of a wave from its crest to its trough.

The amplitude of a sound wave determines how loud the sound is.

Learn more about waves here:

https://brainly.com/question/25954805

#SPJ1

Work  done on the crate by the tension force is -1.8125 J

The work that the tension force during the motion did on the container can be calculated using the work-energy theorem. According to the work-energy theorem, an object's change in kinetic energy equals the net work that is performed on it.

The crate has initial kinetic energy of: because it is initially moving at a speed of 0.500 m/s,

K1 = (1/2)mv1² = (1/2)14.5 kg*0.500 m/s*² = 1.8125 J

The crate encounters an additional upward force of when the rope's tension is increased to 160 N.

[tex]F=mg+T=14.5 kg* 9.81 m/s 2 +160 N=301.245 N[/tex]

The final height of the crate above the ground after an additional 1.35 m of lifting is:

h2 = 1.35 m

The crate has stopped moving at this stage, leaving it with zero final kinetic energy.

As a result, the change in the crate's kinetic energy equals the work done on it by the tension force:

W = K2 - K1 = 0 - 1.8125 J \s= -1.8125 J

Due to the fact that the tension force's work is negative, the crate is being pulled downward by the gravitational force, which is equivalent to the tension force's negative work. This makes sense given that the tension force is working against gravity when the cargo is being hoisted.

Learn more about kinetic energy:

https://brainly.com/question/26472013

The angular velocity of the track star is approximately 0.105 radians/second.

The time taken to run the race is 60 seconds, and the distance covered by the track star is one lap, which is the circumference of the circle. Therefore, the average speed of the track star is:

Average speed = distance / time

Average speed = 2πr / 60 seconds

Average speed = (2π x 63.66 meters) / 60 seconds

Average speed = 6.67 meters/second (rounded to two decimal places)

The angular velocity (ω) of the track star can be calculated using the formula: ω = v / r

where v is the linear velocity of the track star, and r is the radius of the circular track. Since the track star is running at a constant speed, the linear velocity is equal to the average speed calculated above. Therefore, the angular velocity of the track star is:

ω = v / r

ω = 6.67 meters/second / 63.66 meters

ω = 0.105 radians/second (rounded to three decimal places)

To know more about angular velocity:

https://brainly.com/question/30885221

#SPJ4

The acceleration of the boat is 30 miles per hour per hour.

To solve this problem, we need to convert the time from minutes to hours since the speed is given in miles per hour.

30 minutes = 0.5 hours

We can use the formula:

Acceleration = (Final Speed - Initial Speed) / Time

where,

Initial Speed = 45 mph

Final Speed = 60 mph

Time = 0.5 hours

Acceleration = (60 mph - 45 mph) / 0.5 hours

Acceleration = 30 mph/h

To know more about acceleration, here

https://brainly.com/question/12550364

#SPJ4

--The complete question is, A boat is traveling at a speed of 45 mph, then the captain orders to accelerate until the speed is 60 mph. If the operation lasts for 30 minutes. Find the acceleration.--

This is due to the fact that the gravitational pull of the sun is proportionate to the mass of each body, with the larger body being subjected to a stronger gravitational pull than the smaller body.

Depending on how far away from the Sun a planet is, it orbits the Sun at a different speed. When a planet is closer to the Sun, it moves more quickly due to the Sun's stronger gravitational pull.

A planet's angular momentum does not change as it gets further from the Sun, thus it moves more slowly at that distance. The angular momentum of a planet in a circular orbit is determined by its mass (m), its distance from the Sun (d), and its velocity (v).

To know more about momentum visit:-

https://brainly.com/question/30677308

#SPJ1

The tower of Pisa can lean up to an additional 3.5 m off center before becoming unstable.

To determine how much farther the tower can lean before it becomes unstable, we need to calculate the current location of the center of mass and the maximum distance it can move before leaving the base.

Assuming the tower is a uniform cylinder, we can calculate the location of its center of mass using the formula:

x_cm = L/2 + h/4

where L is the length of the cylinder (equal to the diameter, or 7.0 m), and h is the height of the cylinder (equal to 55 m).

Substituting the given values, we get:

x_cm = 7.0/2 + 55/4

x_cm = 5.25 + 13.75

x_cm = 19.0 m

This means that the center of mass of the tower is currently located 19.0 m from the center of the base.

To determine how much farther the tower can lean before becoming unstable, we need to calculate the maximum distance the center of mass can move before leaving the base. This distance is equal to half the diameter of the base, or:

d_max = 7.0/2

d_max = 3.5 m

To know more about Leaning Tower of Pisa:

https://brainly.com/question/30554306

#SPJ4

Answer: A force that acts on a body moving in a circular path and is directed towards the centre around which the body is moving.

Please mark me brainliest.

Answer: Centripetal force is the force that acts on an object moving in a circular path, directed towards the center of that path. It is responsible for keeping the object moving along the circular path and preventing it from flying off in a straight line. The formula for calculating centripetal force is Fc = mv²/r, where Fc is the centripetal force, m is the mass of the object, v is the speed of the object, and r is the radius of the circular path.

is this ok?

The temperature increases at a rate of 0.152 K/s

To determine the rate of temperature increase in the electronic circuit, we can use the formula:

Rate of temperature increase = Power absorbed / (mass × specific heat)

Here, the power absorbed is given as 8 mW, which is equal to 8 × [tex]10^{-3}[/tex] W or 8 × [tex]10^{-3}[/tex] J/s.

The mass of the silicon is 73 mg, which is equal to 73 × [tex]10^{-6}[/tex] kg.

The specific heat of silicon is 705 J/kg K.

Now, Substitute these values into the formula:

Rate of temperature increase = (8 × [tex]10^{-3}[/tex] J/s) / ((73 × [tex]10^{-6}[/tex] kg) × (705 J/kg K))

Rate of temperature increase = 0.152 K/s

So, the temperature of the electronic circuit increases at a rate of approximately 0.152 K/s when no heat can move out of it.

know more about electronic circuits here:

https://brainly.com/question/29639505

#SPJ11

The flask on the left to the flask on the right as energy is transferred from higher to the lower temperature

When initially set up, the direction of thermal energy flow between two flasks will depend on the temperature difference between the two flasks.

Generally, thermal energy flows from hotter objects to colder objects until thermal equilibrium is reached.

So, if the flask on the left has a higher temperature than the flask on the right, thermal energy will flow from the left flask to the right flask.

Conversely, if the flask on the right has a higher temperature, thermal energy will flow from the right flask to the left flask.

However, if both flasks have the same temperature, then thermal energy will not flow between them, and they will remain at thermal equilibrium.

Therefore, the direction of thermal energy flow between two flasks is determined by the temperature difference between them.

For more such answers on Thermal Energy
https://brainly.com/question/7541718

#SPJ11

The light wave is traveling in the +y direction, as its direction of propagation is perpendicular to both the electric and magnetic fields, which are oscillating in the -x and -z directions, respectively.

Based on the direction of the electric and magnetic fields, the wave is traveling in the +y direction (out of the page on a standard xy coordinate system).

This is because light waves are transverse waves, meaning that the direction of their oscillation (in this case, the electric and magnetic fields) is perpendicular to the direction of their propagation. In this case, the electric field is oscillating in the -x direction and the magnetic field is oscillating in the -z direction, which means that the wave is propagating in a direction perpendicular to both of these directions, which is the +y direction.

Learn more about The light wave

https://brainly.com/question/25588186

#SPJ4

The time required for the object attached to a spring to move from the equilibrium position to half the amplitude depends on the specifics of the motion and cannot be determined solely from the period of oscillation.

During its motion, the object attached to a spring oscillates with a sinusoidal motion, which means its speed is not constant. At the maximum displacement, the speed is zero, while it is maximum when the object passes through the equilibrium position. Therefore, the time required for the object to move from the equilibrium position to half the amplitude is not half the period, but rather a smaller fraction of the period.

To determine the time required, one would need to use the equation of motion for a simple harmonic oscillator:

x(t) = A cos(ωt + φ)

where x(t) is the position of the object at time t, A is the amplitude, ω is the angular frequency, and φ is the phase constant. From this equation, we can find the position of the object when it is halfway to the amplitude by setting x(t) equal to A/2 and solving for t:

A/2 = A cos(ωt + φ)

cos(ωt + φ) = 1/2

ωt + φ = ±π/3

t = (±π/3 - φ) / ω

Therefore, the time required for the object to move from the equilibrium position to half the amplitude depends on the phase constant φ and the angular frequency ω. It is important to note that this is a general solution for a simple harmonic oscillator, and specific values for these variables would need to be provided to obtain a numerical answer.

Learn more about harmonic oscillator:

https://brainly.com/question/30354005

#SPJ4

The given statement, The Code generally requires receptacles installed in an unfinished basement to be GFCI protected. The exception(s) to the general rule includes a single receptacle installed to serve a permanently installed alarm system, is true because unfinished basements are considered to be damp and potentially hazardous environments.

The National Electrical Code (NEC) generally requires that all receptacles installed in unfinished basements be protected by ground-fault circuit interrupters (GFCIs) to prevent electrical shock hazards. However, there are some exceptions to this rule.

One of the exceptions is for a single receptacle that is installed to serve a permanently installed alarm system in the unfinished basement. Such a receptacle does not need to be GFCI protected, as long as it is designated as a dedicated branch circuit for the alarm system and meets other applicable code requirements.

It's worth noting that local electrical codes may have additional requirements or exceptions, so it's always a good idea to consult with a licensed electrician or local code authority for specific information related to your installation.

To know more about receptacles, here

brainly.com/question/31150070

#SPJ4

The resistance of R1 and R2 in parallel is lower than their resistance in series.

When two resistors, R1 and R2, are in parallel, the equivalent resistance is calculated as

R = (R1 * R2) / (R1 + R2).

The resulting resistance is always lower than either of the individual resistors. In contrast, when R1 and R2 are in series, the equivalent resistance is calculated as R = R1 + R2. The resulting resistance is always higher than either of the individual resistors.

1. Resistance in Series: In a series circuit, the total resistance R(total) is the sum of the individual resistances (R1 and R2). Mathematically, it is given by:
R (total)= R1 + R2
2. Resistance in Parallel: In a parallel circuit, the total resistance R(total) is found using the reciprocal formula. Mathematically, it is given by:
1/R(total) = 1/R1 + 1/R2
Now, let's compare the two cases:
In a series circuit, the total resistance is simply the sum of the individual resistances, whereas in a parallel circuit, the total resistance is determined by the reciprocal formula. Generally, the total resistance in a parallel circuit is lower than that in a series circuit, due to the reciprocal relationship. This means that when R1 and R2 are connected in parallel, their combined resistance will be less than when they are connected in series.

For more such questions on resistance , Visit:

https://brainly.com/question/28135236

#SPJ11

The velocity of the astronaut as he moves backward is -0.33 m/s.

Velocity is the rate of change of dispalcement.

To calculate the velocity the astronaut moves backward, we use the formula below

Formula:

Where:

From  the question,

Given:

Substitute these values into equation 1 and solve for v

Hence, the velocity is -0.33 m/s.

Learn more about velocity here: https://brainly.com/question/24445340

#SPJ1

The term that has the same meaning for everyone is c. elevated temperature.

The term "elevated temperature" refers to a temperature that is higher than normal, regardless of what the normal temperature is. For example, what is considered a normal temperature in one region may be different from what is considered normal in another region, but an elevated temperature will always be higher than the normal temperature in that particular region.

On the other hand, the terms "hot," "warm," and "temperature of 990f" are all relative and can have different meanings for different people based on their individual experiences and perspectives. Therefore, "elevated temperature" is the only term that can be universally understood as referring to a temperature that is higher than what is considered normal or average.

Learn more about temperature at:

https://brainly.com/question/23411503

#SPJ11