Answer:
13 L
Explanation:
v1/n1 = v2/n2
8.5 L/1.2 mol = v2/1.85 mol
7 L x 1.85 mol = v2/1.85 mol x 1.85 mol
13 L = v2
Answer:
13
Explanation:
able 1 Cell Type Operating Cell Potential for Commercial Batteries, E (V) Lithium-iodine Zinc-mercury +2.80 +1.35 Table 2 Standard Reduction Potential, E' (V) -1.20 Half-Reaction [Zn(OH)212 +2e → Zn + 4 OH Zn(OH)2 +2e → Zn +20H- HgO + H2O +2e → Hg+20H O2 + 2H20 +40 →40H -1.25 +0.10 +0.40 ctronic devices that help regulate the heart rate. Currently, lithium-iodine cells are commonly used to power pacemakers and have replaced zinc-me otential, E, for each cell. Table 2 provides the standard reduction potentials for several half-reactions related to zinc-mercury and zinc-air cells. dation given, which of the following is a major difference between the zinc-mercury cell and the lithium-iodine cell? 0, +2H2O + 4e +40H +0.40 Pacemakers are electronic devices that help regulate the heart rate Currently, lithium-iodine cells are commonly used to power pacemakers and have replaced zinc-mercury cells. Table 1 provides the operating cell potential, E, for each cell. Table 2 provides the standard reduction potentials for several half-reactions related to zinc-mercury and zinc air cells. Based on the information given, which of the following is a major difference between the zinc mercury cell and the lithium-iodine cell?
A. During the initial cell operation, each reaction is thermodynamically favorable, but the larger operating potential of the lithium-iodine cell indicates that its cell reaction is less thermodynamically favorable.
B. During the initial cell operation, each reaction is thermodynamically favorable, but the larger operating potential of the lithium-iodine cell indicates that its cell reaction is more thermodynamically favorable.
C. During the initial cell operation, the oxidation of iodine is thermodynamically favorable but the oxidation of mercury is not.
D. During the initial cell operation, the oxidation of mercury is thermodynamically favorable but not the oxidation of iodine is not.
Answer:
During the initial cell operation, each reaction is thermodynamically favorable, but the larger operating potential of the lithium-iodine cell indicates that its cell reaction is more thermodynamically favorable. ( B )
During the initial cell operation, the oxidation of iodine is thermodynamically favorable but the oxidation of mercury is not. ( C )
Explanation:
The major Differences between The Zinc mercury cell and Lithium-iodine cell are :
During the initial cell operation, each reaction is thermodynamically favorable, but the larger operating potential of the lithium-iodine cell indicates that its cell reaction is more thermodynamically favorable. and
During the initial cell operation, the oxidation of iodine is thermodynamically favorable but the oxidation of mercury is not.
Given the relationship below,
Δ G = -nFE
E = emf of cell , G = free energy.
This relationship shows that if E is positive the reaction will be thermodynamically favorable also if E is large it will increase the negativity of free energy also From the question we can see that with the reduction of mercury the value of E is more positive and this shows that Mercury is thermodynamically unfavorable
The galaxies pictured above would best be classified as
A barred galaxies
C irregular galaxies
B spiral galaxies
D
elliptical galaxies
Answer:
Spiral galaxies
Explanation:
What type of matter do alloys fall under?
a) Element
b) Compound
c) Heterogeneous mixture
d) Homogeneous mixture
Answer:
An alloy is a homogeneous mixture
Explanation:
D
An alloy, a metallic substance composed of two or more elements, as either a compound or a solution is a homogeneous mixture. The correct option is d.
What is an alloy?An alloy is a mixture of chemical elements of which at least one is a metal. Unlike chemical compounds with metallic bases, an alloy will retain all the properties of metal in the resulting material, such as electrical conductivity, ductility, opacity, and lustre, but may have properties that differ from those of pure metals, such as increased strength or hardness.
In some cases, an alloy may reduce the overall cost of the material while preserving important properties. In other cases, the mixture imparts synergistic properties to the constituent metal elements such as corrosion resistance or mechanical strength. Alloys are defined by a metallic bonding character. The alloy constituents are usually measured by mass percentage for practical applications, and in atomic fraction for basic science studies.
Alloys are usually classified as substitutional or interstitial alloys, depending on the atomic arrangement that forms the alloy.
Learn more about alloy, here:
https://brainly.com/question/3718729
#SPJ6
A cation with a +4 charge has 26 neutrons and 18 electrons. What is the identity of the element?
Answer: Titanium has 22 protons
Explanation: If an atoms donates 4 electrons, it forms cation with charge +4. So original atom have 22 electrons and because atom is neutral, it has 22 protons. Number of neutrons does not matter, there are more neutrons than protons in heavier atoms.
2) Using the following equation:
Water is added to iron and over time iron (III) oxide along with hydrogen gas is produced.
a. How many grams of iron (III) oxide will be produced when 15.5g of iron reacts with excess water?
b. Calculate the percent yield if your team produced 14.5g of iron (III) oxide.
c. If the reaction takes place under STP then how many liters of hydrogen gas are produced?
the answer is 133
because thats how the water is
Male bower birds attract mates with their _______.
A.
feathers
B.
looks
C.
songs
D.
behavior
Answer:
D
Explanation:
Male bowerbirds use their intelligence to impress the females, constructing elaborate structures called bowers to attract mates.
Answer: D. Behavior
Explanation: this is what it says the corresponding answer is on study island
Copper can be shaped into wires because it is
.ANSWER:Copper is a ductile metal
EXPLAIN :This means that it can easily be shaped into pipes and drawn into wires. Copper pipes are lightweight because they can have thin walls. They don't corrode and they can be bent to fit around corners.
Copper is a ductile metal due to ductility.This means that it can easily be shaped into pipes and drawn into wires. Copper pipes are lightweight because they can have thin walls.
Ductility is a mechanical property commonly described as a material's amenability to drawing (e.g. into wire).In materials science, ductility is defined by the degree to which a material can sustain plastic deformation under tensile stress before failure. Ductility is an important consideration in engineering and manufacturing. It defines a material's suitability for certain manufacturing operations (such as cold working) and its capacity to absorb mechanical overload.
Some metals that are generally described as ductile include gold and copper, while platinum is the most ductile of all metals in pure form.However, not all metals experience ductile failure as some can be characterized with brittle failure like cast iron. Polymers generally can be viewed as ductile materials as they typically allow for plastic deformation.
Learn more about ductility,here:
https://brainly.com/question/29416697
#SPJ6
Light and radio are examples of the __________________________ or ______________________ energy form, which is ________________ because it is always moving.
Answer:
Radiant; electromagnetic; kinetic energy.
Explanation:
Energy can be defined as the ability (capacity) to do work. The various forms of energy are solar energy, electrical energy, chemical energy, thermal energy, wind energy, nuclear energy etc.
The two (2) main types of energy are;
a. Gravitational potential energy (GPE): it is an energy possessed by an object or body due to its position above the earth.
b. Kinetic energy (KE): it is an energy possessed by an object or body due to its motion.
Light and radio are examples of the radiant or electromagnetic energy form, which is kinetic energy because it is always moving.
Kinetic energy can be defined as an energy possessed by an object or body due to its motion.
Mathematically, kinetic energy is given by the formula;
[tex] K.E = \frac{1}{2}MV^{2}[/tex]
Where;
K.E represents kinetic energy measured in Joules.
M represents mass measured in kilograms.
V represents velocity measured in metres per seconds square.
a gas has a pressure of 0.470 atm at 60.0 C. What is the pressure at standard temperature?
Answer:
P2=0.385atm
Explanation:
step one:
Given that the temperature T1= 60 Celcius
we can convert this to kelvin by adding 273k to 60 Celcius
we have T1= 333k
pressure P1= 0.470 atm
step two:
we know that the standard temperature is T2= 273K
Applying the temperature and pressure relationship we have
P1/T1=P2/T2
substituting our given data we have
0.47/333=P2/273
cross multiply we have
P2= (0.47*273)/333
P2= 128.31/333
P2=0.385 atm
Which of the Following is a true statement regarding a strong acid such as 0.1M HNO3(aq) and weak acid such as HF?
A. 0.1 M HNO3 (aq) solution contains more H+ than HF(aq) solution
B. 0.1 M HNO3 (aq) solution contains less H+ than HF(aq) solution
C. 0.1M HNO3 (aq) solution contains the same amount of H+ as HF (aq) solution
D. 0.1M HNO3 (aq) solution has a higher pH then the HF (aq) solution
Answer:
A. 0.1 M HNO3 (aq) solution contains more H+ than HF(aq) solution
How can you tell if an atom has a positive charge? What type of ion is this?
Answer:i love you
Explanation:
Answer: An atom can acquire a positive charge or a negative charge depending on whether the number of electrons in an atom is greater or less then the number of protons in the atom. If the atom has more electrons than protons, it is a negative ion, or ANION. If it has more protons than electrons, it is a positive ion.
Explanation:
7 organic compounds of plant origin
Answer:
carbohydrates, lipids, proteins and nucleic acidsWhich of the following is NOT correct about the mole concept?
1 point
1 mole of sodium atoms will ionize to produce 1 mole of sodium ions and 1 mole of
electrons
A mole is the number of carbon atoms in 12g of C-12 isotope.
A mole is the number of molecules in 22.4 dm3 of all gases at all temperatures and
pressures
A mole is the number of electrons that carry one Faraday of electricity
A mole is the number of molecules of water in 18 g of ice, water or water vapour
Answer:
a mole is the number of molecules in 22.4 dm³ for all gases at all temperatures and pressures
Calculate the molar mass of PbSo3
Answer:
Lead sulfite is the inorganic compound with the formula PbSo3 or O3PbS.
Explanation:
How many non bonding electrons are on the central atom of a molecule of RnF4?
Crystallization: What is the difference between raw and pure products?
Answer:
Hello There!!
Explanation:
Pure products come from and made where they are original made and raw products are just pasteurized with no added ingredients included in them.
hope this helps,have a great day!!
~Pinky~
what are the isomers of hexane
Physical properties
Isomer M.P. (°C) B.P. (°C)
n-hexane −95.3 68.7
3-methylpentane −118.0 63.3
2-methylpentane (isohexane) −153.7 60.3
2,3-dimethylbutane −128.6 58.0
1 more row
If a gas in a container with a fixed volume has a pressure of 748 torr at 15°C, the pressure will
double at__ °C
Answer:
576K
Explanation:
Using the formula
P1/T1 = P2/T2
Where;
P1 = initial pressure (torr)
P2 = final pressure (torr)
T1 = initial temperature (K)
T2 = final temperature (K)
According to the information provided in this question,
P1 = 748 torr
P2 = 1496 torr
T1 = 15°C = 15 + 273 = 288K
T2 = ?
Using P1/T1 = P2/T2
T2 = P2T1/P1
T2 = (1496 × 288) ÷ 748
T2 = 430848 ÷ 748
T2 = 576K
0.03mol of element Y combines with 762g of iodine to produce an iodide salt. State the empirical formula of the iodide salt
Answer:
ok bahsnkqlaibn. jsnsugsoq
What is the % Yield if 3.8 g of Cu was produced?
Explain what might happen to tundra animals, such as polar bears, as earth's climate warms. pls explain
Answer:
They will die.
Explanation:
Polar Bears were made to live in the frigid temperatures of the tundras. If there is a temperature change it can affect their habitat. It can destroy it and they would have to move out to another place. They can die due to global warming.
If 18.0 g of CO2 is produced in the reaction of C2H2 with O2 to form CO2 and
H2O, how many grams of H20 are produced in this reaction?
O 3.68 g
9.0 g
14.7 g
None of the above
7.37 g
Answer:
3.68 g
Explanation:
[tex]n_{CO2}[/tex] = 18 ÷ 44 = 0.4
2C2H2 + 5O2 → 4CO2 + 2H2O
2 : 5 : 4 : 2
0.409 (moles)
⇒ [tex]n_{H2O}[/tex] = 0.409 × 2 ÷ 4 = 0.2045 moles
⇒ [tex]m_{H2O}[/tex] = 0.2045 × 18 = 3.68 grams
what is the process by which gas changes to a solid
HELP ME!!! Is it right? Or wrong
How many moles in 2.5 x 10^24 atoms of calcium
There are 6.02*10 ^23 atoms in one mole of any substance according to avogadros law. Therefore in 2.41*10 ^25 calcium atoms, there are (2.41*10 ^25/6.02*10 ^23) moles of calcium, which is 40.03322259 or approximately 40 moles of calcium.
An acetate buffer solution is prepared by combining 50. mL of 0.20 M acetic acid,
HC2H3O2(aq), and 50. mL of 0.20 M sodium acetate, NaC2H3O2(aq). A 5.0 mL sample of 0.10 M NaOH(aq) is added to the buffer solution.
Which of the following is a correct pairing of the acetate species present in greater concentration and of the pH of the solution after the NaOH(aq) is added? (The pKa of acetic acid is 4.7.)
Acetate Species -- pH
(A) HC2H3O2 -- < 4.7
(B) HC2H3O2 -- > 4.7
(C) C2H3O2 -- < 4.7
(D) C2H3O2 -- > 4.7
Answer:
The answer is "Option B".
Explanation:
[tex]\to CH_3COOH + NaOH \longleftrightarrow CH_3COONa + H_2O\\\\\to CH_3COONa + NaOH\longleftrightarrow CH3COONa\\\\\therefore \ mol\ NaOH = (5 \ E-3\ L)\times(0.10 \ \frac{mol}{L}) = 5 \ E-4\ mol\\\\[/tex]
[tex]\to mol\ CH_3COOH = (0.05 \ L)\times(0.20 \frac{mol}{L}) = 0.01 \ mol\\\\\to C \ CH_3COOH = \frac{(0.01 \ mol - 5 \ E-4\ mol) }{(0.105 \ L)}\\\\\to C \ CH_3COOH = 0.0905 \ M\\\\\therefore \ mol \ CH_3COONa = (0.05\ L )\times (0.20 \ \frac{mol}{L}) = 0.01 \ mol\\\\[/tex]
[tex]\to C \ CH_3COONa = \frac{(0.01\ mol + 5 \ E-4\ mol)}{(0.105\ L )}\\\\\to C \ CH_3COONa = 0.1 \ M\\\\\therefore Ka = ([H_3O^{+}]\times \frac{(0.1 + [H_3O^+]))}{(0.0905 - [H_3O^+])} = 1.75\ E-5\\\\\to 0.1[H_3O^+] + [H_3O^+]^2 = (1.75 E-5)\times (0.0905 - [H_3O^+])\\\\[/tex]
[tex]\to [H_3O^+]^2 \ 0.1[H_3O^+] = 1.584\ E-6 - 1.75\ E-5[H_3O^+]\\\\\to [H_3O^+]^2 + 0.1000175[H_3O^+] - 1.584 \ E-6 = 0\\\\\to [H_3O^+] = 1.5835\ E-5 \ M\\\\\therefore pH = - \log [H_3O^+]\\\\\to pH = - \log (1.5835 \ E-5)\\\\ \to pH = 4.8004 > 4.7[/tex]
Is -280 f degrees hot or cold
Answer:
COLD
Explanation:
Answer:
hot
Explanation:
anything above 100 is consider hot
Please only answer if you're going to help.
Match the following items with their definitions.
1. capable of being dissolved
2. not capable of being dissolved
3. to break up in molecular or ionic parts to form a solution
4. the substance that is dissolved in the solution
5. the substance that does the dissolving
6. any solution with water as the solvent
solute
solvent
aqueous
soluble
dissolve
insoluble
Answer:
1.solvent
2.unsoluble
3.solute
4.solvent
5.souble
6.aqueous
A piece of copper has a density of 8.96 g/cm3, what is the volume of a 4.2 g piece?
Answer:
0.47 cm³
Explanation:
[tex]Volume=Mass/Density\\[/tex]
Plug in the mass (4.2 grams) and the density (8.96 g/cm³)
[tex]Volume=4.2/8.96\\Volume=0.47[/tex]
Therefore, the volume of a 4.2 g piece of copper is approximately 0.47 cm³.
I hope this helps!
A flexible container at an initial volume of 6.13 L contains 2.51 mol of gas. More gas is then added to the container until it reaches a final volume of 11.3 L. Assuming the pressure and temperature of the gas remain constant, calculate the number of moles of gas added to the container.
Answer:
2.12 moles of gas were added.
Explanation:
We can solve this problem by using Avogadro's law, which states that at constant temperature and pressure:
V₁n₂=V₂n₁Where in this case:
V₁ = 6.13 Ln₂ = ?V₂ = 11.3 Ln₁ = 2.51 molWe input the data:
6.13 L * n₂ = 11.3 L * 2.51 moln₂ = 4.63As 4.63 moles is the final number of moles, the number of moles added is:
4.63 - 2.51 = 2.12 moles