(a) Thee average coefficient of linear expansion for this temperature range is approximately 3.17 x 10^(-5) / °C. (b) The stress in the wire, when cooled to 20.0°C without being allowed to contract, is approximately 2.54 x 10^3 Pa.
(a) The average coefficient of linear expansion (α) can be calculated using the formula:
α = (ΔL / L₀) / ΔT
Where ΔL is the change in length, L₀ is the initial length, and ΔT is the change in temperature.
Given that the initial length (L₀) is 1.50 m, the change in length (ΔL) is 1.90 cm (which is 0.019 m), and the change in temperature (ΔT) is 420.0°C - 20.0°C = 400.0°C, we can substitute these values into the formula:
α = (0.019 m / 1.50 m) / 400.0°C
= 0.01267 / 400.0°C
= 3.17 x 10^(-5) / °C
(b) The stress (σ) in the wire can be calculated using the formula:
σ = E * α * ΔT
Where E is the Young's modulus, α is the coefficient of linear expansion, and ΔT is the change in temperature.
Given that the Young's modulus (E) is 2.0 x 10^11 Pa, the coefficient of linear expansion (α) is 3.17 x 10^(-5) / °C, and the change in temperature (ΔT) is 420.0°C - 20.0°C = 400.0°C, we can substitute these values into the formula:
σ = (2.0 x 10^11 Pa) * (3.17 x 10^(-5) / °C) * 400.0°C
= 2.0 x 10^11 Pa * 3.17 x 10^(-5) * 400.0
= 2.54 x 10^3 Pa.
To learn more about the linear expansion, click here: https://brainly.com/question/32547144
#SPJ11
Determine the number of electrons, protons, and neutrons in
argon
3818Ar
.
HINT
(a)
electrons
(b)
protons
(c)
neutrons
The number of electrons in Argon is 18, the number of protons is 18, and the number of neutrons is 20.
Now, let's proceed to the second part of the question. Here's how to determine the number of electrons, protons, and neutrons in Argon 38 :18 Ar :Since the atomic number of Argon is 18, it has 18 protons in its nucleus, which is also equal to its atomic number.
Since Argon is neutral, it has 18 electrons orbiting around its nucleus.In order to determine the number of neutrons, we have to subtract the number of protons from the atomic mass. In this case, the atomic mass of Argon is 38.
Therefore: Number of neutrons = Atomic mass - Number of protons Number of neutrons = 38 - 18 Number of neutrons = 20 Therefore, the number of electrons in Argon is 18, the number of protons is 18, and the number of neutrons is 20
Know more about electrons here:
https://brainly.com/question/12001116
#SPJ11
Pilings are driven into the ground at a buiding site by dropping a 2050 kg object onto theri. What ehange in gravitational potential enerify does the object undergo if it is released from rest 17,0 m above the jorvund and ends up 130 rabove the growad?
The change in gravitational potential energy that the object undergoes if it is released from rest 17.0 m above the ground and ends up 1.30m above the ground is -28,869.5 J.
The change in gravitational potential energy is equal to the product of the object's mass, gravitational acceleration, and the difference in height or altitude (initial and final heights) of the object.
In other words, the formula for gravitational potential energy is given by : ΔPEg = m * g * Δh
where
ΔPEg is the change in gravitational potential energy.
m is the mass of the object.
g is the acceleration due to gravity
Δh is the change in height or altitude
Here, the object has a mass of 2050 kg and is initially at a height of 17.0 m above the ground and then falls to 1.30 m above the ground.
Thus, Δh = 17.0 m - 1.30 m = 15.7 m
ΔPEg = 2050 kg * 9.81 m/s² * 15.7 m
ΔPEg = 319,807.35 J
The object gained 319,807.35 J of gravitational potential energy.
However, the question is asking for the change in gravitational potential energy of the object.
Therefore, the final step is to subtract the final gravitational potential energy from the initial gravitational potential energy.
The final gravitational potential energy can be calculated using the final height of the object.
Final potential energy = m * g * hfinal= 2050 kg * 9.81 m/s² * 1.30 m = 26,618.5 J
Thus, ΔPEg = PEfinal - PEinitial
ΔPEg = 26,618.5 J - 346,487.0 J
ΔPEg = -28,869.5 J
Therefore, the change in gravitational potential energy that the object undergoes is -28,869.5 J.
To learn more about gravitational potential energy :
https://brainly.com/question/3120930
#SPJ11
Find the approximate electric field magnitude at a distance d from the center of a line of charge with endpoints (-L/2,0) and (L/2,0) if the linear charge density of the line of charge is given by A= A cos(4 mx/L). Assume that d>L.
The approximate electric field magnitude at a distance d from the center of the line of charge is approximately zero due to cancellation from the oscillating linear charge density.
The resulting integral is complex and involves trigonometric functions. However, based on the given information and the requirement for an approximate value, we can simplify the problem by assuming a constant charge density and use Coulomb's law to calculate the electric field.
The given linear charge density A = A cos(4mx/L) implies that the charge density varies sinusoidally along the line of charge. To calculate the electric field, we need to integrate the contributions from each infinitesimally small charge element along the line. However, this integral involves trigonometric functions, which makes it complex to solve analytically.
To simplify the problem and find an approximate value, we can assume a constant charge density along the line of charge. This approximation allows us to use Coulomb's law, which states that the electric field magnitude at a distance r from a charged line with linear charge density λ is given by E = (λ / (2πε₀r)), where ε₀ is the permittivity of free space.
Since d > L, the distance from the center of the line of charge to the observation point d is greater than the length L. Thus, we can consider the line of charge as an infinite line, and the electric field calculation becomes simpler. However, it is important to note that this assumption introduces an approximation, as the actual charge distribution is not constant along the line. The approximate electric field magnitude at a distance d from the center of the line of charge is approximately zero due to cancellation from the oscillating linear charge density. Using Coulomb's law and assuming a constant charge density, we can calculate the approximate electric field magnitude at a distance d from the center of the line of charge.
Learn more about assumption here: brainly.com/question/31868402
#SPJ11
Question 21 () a) wider fringes will be formed by decreasing the width of the slits. increasing the distance between the slits. increasing the width of the slits. decreasing the distance between the slits. Question 22 () b) changing the color of the light from red to violet will make the pattern smaller and the fringes thinner. make the pattern larger and the fringes thicker. make the pattern larger and the fringes thinner. make the pattern smaller and the fringes thicker.
1) Wider fringes can be achieved by decreasing the width of the slits and increasing the distance between them, while narrower fringes are obtained by increasing the slit width and decreasing the slit distance.
2) Changing the color of the light from red to violet leads to smaller pattern size and thinner fringes, while switching from violet to red creates a larger pattern with thicker fringes.
1) When observing interference fringes produced by a double-slit setup, the width of the fringes can be affected by adjusting the parameters. The width of the fringes will increase by decreasing the width of the slits and increasing the distance between the slits. Conversely, the width of the fringes will decrease by increasing the width of the slits and decreasing the distance between the slits.
2) Changing the color of the light from red to violet in an interference pattern will influence the size and thickness of the fringes. Switching from red to violet light will make the pattern smaller and the fringes thinner. Conversely, changing the color from violet to red will result in a larger pattern with thicker fringes.
Learn more about fringes from the given link!
https://brainly.com/question/29487127
#SPJ11
In an RC series circuit, ε = 12.0 V, R = 1.49 MQ, and C= 1.64 F. (a) Calculate the time constant. (b) Find the maximum charge that will appear on the capacitor during charging. (c) How long does it take for the charge to build up to 11.5C? (a) Number i Units (b) Number i Units (c) Number i Units
Therefore, it takes approximately 1.218 × 10⁶ seconds for the charge to build up to 11.5 C.
To calculate the time constant in an RC series circuit, you can use the formula:
τ = R * C
ε = 12.0 V
R = 1.49 MQ (megaohm)
C = 1.64 F (farad)
(a) Calculate the time constant:
τ = R * C
= 1.49 MQ * 1.64 F
τ = (1.49 × 10⁶ Ω) * (1.64 C/V)
= 2.4436 × 10⁶ s (seconds)
Therefore, the time constant is approximately 2.4436 × 10⁶ seconds.
(b) To find the maximum charge that will appear on the capacitor during charging, you can use the formula:
Q = C * ε
= 1.64 F * 12.0 V
= 19.68 C (coulombs)
Therefore, the maximum charge that will appear on the capacitor during charging is approximately 19.68 coulombs.
(c) To calculate the time it takes for the charge to build up to 11.5 C, you can use the formula:
t = -τ * ln(1 - Q/Q_max)
t = - (2.4436 × 10⁶s) * ln(1 - 11.5 C / 19.68 C)
t ≈ - (2.4436 ×10⁶ s) * ln(0.4157)
t ≈ 1.218 × 10^6 s (seconds)
Learn more about series circuit here : brainly.com/question/14997346
#SPJ11
If you are using a motion encodr receiver to find the veloicty of a cart, how would you find the uncertainty in veloicty?
To find the uncertainty in velocity using a motion encoder receiver, you need to consider the uncertainties in the measurements, collect multiple measurements, calculate the standard deviation, and report the uncertainty as a range around the measured velocity.
To find the uncertainty in velocity when using a motion encoder receiver, you would need to consider the uncertainties associated with the measurements taken by the receiver. Here's how you can do it:
Determine the uncertainties in the measurements: This involves identifying the sources of uncertainty in the motion encoder receiver. It could be due to factors like resolution limitations, noise in the signal, or calibration errors. Consult the manufacturer's specifications or conduct experiments to determine these uncertainties.
Collect multiple measurements: Take several velocity measurements using the motion encoder receiver. It is important to take multiple readings to account for any random variations or errors.
Calculate the standard deviation: Calculate the standard deviation of the collected measurements. This statistical measure quantifies the spread of the data points around the mean. It provides an estimation of the uncertainty in the velocity measurements.
Report the uncertainty: Express the uncertainty as a range around the measured velocity. Typically, uncertainties are reported as a range of values, such as ± standard deviation or ± percentage. This range represents the potential variation in the velocity measurements due to the associated uncertainties.
To find the uncertainty in velocity using a motion encoder receiver, you need to consider the uncertainties in the measurements, collect multiple measurements, calculate the standard deviation, and report the uncertainty as a range around the measured velocity.
To know more about velocity visit:
brainly.com/question/30559316
#SPJ11
A highway is made of concrete slabs that are 17.1 m long at 20.0°C. Expansion coefficient of concrete is α = 12.0 × 10^−6 K^−1.
a. If the temperature range at the location of the highway is from −20.0°C to +33.5°C, what size expansion gap should be left (at 20.0°C) to prevent buckling of the highway? answer in mm
b. If the temperature range at the location of the highway is from −20.0°C to +33.5°C, how large are the gaps at −20.0°C? answer in mm
The gap size at -20.0°C is 150 mm + 0.9 mm + 7.7 mm = 159.6 mm.
a. The expansion gap size at 20.0°C to prevent buckling of the highway is 150 mm. b.
The gap size at -20.0°C is 159.6 mm.
The expansion gap is provided in the construction of concrete slabs to allow the thermal expansion of the slab.
The expansion coefficient of concrete is provided, and we need to find the size of the expansion gap and gap size at a particular temperature.
The expansion gap size can be calculated by the following formula; Change in length α = Expansion coefficient L = Initial lengthΔT = Temperature difference
At 20.0°C, the initial length of the concrete slab is 17.1 mΔT = 33.5°C - (-20.0°C)
= 53.5°CΔL
= 12.0 × 10^-6 K^-1 × 17.1 m × 53.5°C
= 0.011 mm/m × 17.1 m × 53.5°C
= 10.7 mm
The size of the expansion gap should be twice the ΔL.
Therefore, the expansion gap size at 20.0°C to prevent buckling of the highway is 2 × 10.7 mm = 21.4 mm
≈ 150 mm.
To find the gap size at -20.0°C, we need to use the same formula.
At -20.0°C, the initial length of the concrete slab is 17.1 m.ΔT = -20.0°C - (-20.0°C)
= 0°CΔL
= 12.0 × 10^-6 K^-1 × 17.1 m × 0°C
= 0.0 mm/m × 17.1 m × 0°C
= 0 mm
The gap size at -20.0°C is 2 × 0 mm = 0 mm.
However, at -20.0°C, the slab is contracted by 0.9 mm due to the low temperature.
Therefore, the gap size at -20.0°C is 150 mm + 0.9 mm + 7.7 mm = 159.6 mm.
Learn more about gap size from the given link;
https://brainly.com/question/31841356
#SPJ11
Susan's 10.0 kg baby brother Paul sits on a mat. Susan pulls the mat across the floor using a rope that is angled 30∘ above the floor. The tension is a constant 31.0 N and the coefficient of friction is 0.210.
Use work and energy to find Paul's speed after being pulled 2.90 m .
Paul's speed after being pulled at distance of 2.90 m is approximately 2.11 m/s
Mass of Paul (m) = 10.0 kg
Angle of the rope (θ) = 30°
Tension force (T) = 31.0 N
Coefficient of friction (μ) = 0.210
Distance pulled (d) = 2.90 m
First, let's calculate the work done by the tension force:
Work done by tension force (Wt) = T * d * cos(θ)
Wt = 31.0 N * 2.90 m * cos(30°)
Wt = 79.741 J
Next, let's calculate the work done by friction:
Work done by friction (Wf) = μ * m * g * d
where g is the acceleration due to gravity (approximately 9.8 m/s²)
Wf = 0.210 * 10.0 kg * 9.8 m/s² * 2.90 m
Wf = 57.471 J
The net work done on Paul is the difference between the work done by the tension force and the work done by friction:
Net work done (Wnet) = Wt - Wf
Wnet = 79.741 J - 57.471 J
Wnet = 22.270 J
According to the work-energy principle, the change in kinetic energy (ΔKE) is equal to the net work done:
ΔKE = Wnet
ΔKE = 22.270 J
Since Paul starts from rest, his initial kinetic energy is zero (KE_initial = 0). Therefore, the final kinetic energy (KE_final) is equal to the change in kinetic energy:
KE_final = ΔKE = 22.270 J
We can use the kinetic energy formula to find Paul's final speed (v):
KE_final = 0.5 * m * v²
22.270 J = 0.5 * 10.0 kg * v²
22.270 J = 5.0 kg * v²
Dividing both sides by 5.0 kg:
v² = 4.454
Taking the square root of both sides:
v ≈ 2.11 m/s
Therefore, Paul's speed after being pulled at a distance of 2.90 m is approximately 2.11 m/s.
Learn more about tension force:
https://brainly.com/question/30343908
#SPJ11
Simple Harmonic Oscillator. For a CO (carbon monoxide) molecule, assume that the system vibrates at o=4.0.1014 [Hz]. a. Wavefunction: Sketch the wave function for the n=5 state of the SHO. Points will be given on qualitative accuracy of the solution. Include a brief description to help me understand critical components of your sketch and label the sketch appropriately. b. Probabilities: Make a qualitatively correct sketch that indicates the probability of finding the state as a function of interatomic separation for n=5 indicate any important features. (Sketch plus 1 sentence). c. Classical turning points: Calculate the probability that the interatomic distance is outside the classically allowed region for the n=1 state
a. For the n=5 state of the SHO, the wavefunction is a symmetric Gaussian curve centered at the equilibrium position, with decreasing amplitudes as you move away from it.
b. The probability of finding the n=5 state as a function of interatomic separation is depicted as a plot showing a peak at the equilibrium position and decreasing probabilities as you move away from it.
c. The probability of the interatomic distance being outside the classically allowed region for the n=1 state of the SHO is negligible, as the classical turning points are close to the equilibrium position and the probability significantly drops away from it.
a. Wavefunction: The wave function for the n=5 state of the Simple Harmonic Oscillator (SHO) can be represented by a Gaussian-shaped curve centered at the equilibrium position. The amplitude of the curve decreases as you move away from the equilibrium position. The sketch should show a symmetric curve with a maximum at the equilibrium position and decreasing amplitudes as you move towards the extremes.
b. Probabilities: The probability of finding the state as a function of interatomic separation for the n=5 state of the SHO can be depicted as a plot with the probability density on the y-axis and the interatomic separation on the x-axis. The sketch should show a peak at the equilibrium position and decreasing probabilities as you move away from the equilibrium. The important feature to highlight is that the probability distribution extends beyond the equilibrium position, indicating the possibility of finding the molecule at larger interatomic separations.
c. Classical turning points: In the classical description of the Simple Harmonic Oscillator, the turning points occur when the total energy of the system equals the potential energy. For the n=1 state, the probability of the interatomic distance being outside the classically allowed region is negligible. The classical turning points are close to the equilibrium position, and the probability of finding the molecule significantly drops as you move away from the equilibrium.
Learn more about Probability from the link given below.
https://brainly.com/question/31828911
#SPJ4
QUESTION 3 What is the mutual inductance in nk of these two loops of wire? Loop 1 Leop 44 20 Both loops are rectangles, but the length of the horizontal components of loop 1 are infinite compared to the size of loop 2 The distance d-5 cm and the system is in vacuum
Mutual inductance is an electromagnetic quantity that describes the induction of one coil in response to a variation of current in another nearby coil.
Mutual inductance is denoted by M and is measured in units of Henrys (H).Given that both loops are rectangles, the length of the horizontal components of loop 1 are infinite compared to the size of loop 2. The distance d-5 cm and the system is in vacuum, we are to calculate the mutual inductance of both loops.
The formula for calculating mutual inductance is given as:
[tex]M = (µ₀ N₁N₂A)/L, whereµ₀ = 4π × 10−7 H/m[/tex] (permeability of vacuum)
N₁ = number of turns of coil
1N₂ = number of turns of coil 2A = area of overlap between the two coilsL = length of the coilLoop 1,Leop 44,20 has a rectangular shape with dimensions 44 cm and 20 cm, thus its area
[tex]A1 is: A1 = 44 x 20 = 880 cm² = 0.088 m²[/tex].
Loop 2, on the other hand, has a rectangular shape with dimensions 5 cm and 20 cm, thus its area A2 is:
[tex]A2 = 5 x 20 = 100 cm² = 0.01 m².[/tex]
To know more about electromagnetic visit:
https://brainly.com/question/23727978
#SPJ11
A current circulates around a 2. 10-mm-diameter superconducting ring. What is the ring's magnetic dipole moment? Express your answer in amper-meters squared with the appropriate units. What is the on-axis magnetic field strength 5.10 cm from the ring? Express your answer with the appropriate units.
The magnetic dipole moment of the superconducting ring is 3.48 × 10⁻⁹ I A·m² and the magnetic field strength of the ring is 1.70 × 10⁻⁸ I T.
Given the following values:Diameter (d) = 2.10 mm Radius (r) = d/2
Magnetic Permeability of Free Space = μ = 4π × 10⁻⁷ T·m/A
The magnetic dipole moment (µ) of the superconducting ring can be calculated by the formula:µ = Iπr²where I is the current that circulates around the ring, π is a mathematical constant (approx. 3.14), and r is the radius of the ring.Substituting the known values, we have:µ = Iπ(2.10 × 10⁻³/2)²= 3.48 × 10⁻⁹ I A·m² .
The magnetic field strength (B) of the superconducting ring at a point 5.10 cm from the ring (on its axis) can be calculated using the formula:B = µ/4πr³where r is the distance from the ring to the point where the magnetic field strength is to be calculated.Substituting the known values, we have:B = (3.48 × 10⁻⁹ I)/(4π(5.10 × 10⁻²)³)= 1.70 × 10⁻⁸ I T (answer to second question)
Hence, the magnetic dipole moment of the superconducting ring is 3.48 × 10⁻⁹ I A·m² and the magnetic field strength of the ring is 1.70 × 10⁻⁸ I T.
For further information on Magnetic field strength visit :
https://brainly.com/question/31307493
#SPJ11
The Hamiltonian for a two-particle system is given by H = w(L12 + L22) + L₁ L₁. L2 ħ + w/h L₁, L2 denote the angular momentum of each particle. (a) Find the energy eigenvalues and the corresponding eigenstates. (b) The system is prepared to have l₁ = 1, l₂ = 2, m₁ = 0 and m₂ = 1. Find all the energy eigenvalues it can have and also find the probability to measure each energy eigenvalue.
The value is:
(a) The energy eigenvalues of the two-particle system are given by E = 2w(l₁(l₁+1) + l₂(l₂+1) - l₃(l₃+1)), where l₁, l₂, and l₃ are the quantum numbers associated with the angular momentum of each particle.
(b) For the specific case of l₁ = 1, l₂ = 2, m₁ = 0, and m₂ = 1, the possible energy eigenvalues are E = 12w, E = 8w, and E = 4w, corresponding to l₃ = 1, l₃ = 2, and l₃ = 3, respectively.
To find the energy eigenvalues and corresponding eigenstates, we need to solve the Schrödinger equation for the given Hamiltonian.
(a) Energy Eigenvalues and Eigenstates:
The Hamiltonian for the two-particle system is given by:
H = w(L₁² + L₂²) + (L₁ . L₂) ħ + (w/ħ) L₁ . L₂
To find the energy eigenvalues and eigenstates, we need to solve the Schrödinger equation:
H |ψ⟩ = E |ψ⟩
Let's assume that the eigenstate can be expressed as a product of individual angular momentum eigenstates:
|ψ⟩ = |l₁, m₁⟩ ⊗ |l₂, m₂⟩
where |l₁, m₁⟩ represents the eigenstate of the angular momentum of particle 1 and |l₂, m₂⟩ represents the eigenstate of the angular momentum of particle 2.
Substituting the eigenstate into the Schrödinger equation, we get:
H |l₁, m₁⟩ ⊗ |l₂, m₂⟩ = E |l₁, m₁⟩ ⊗ |l₂, m₂⟩
Expanding the Hamiltonian, we have:
H = w(L₁² + L₂²) + (L₁ . L₂) ħ + (w/ħ) L₁ . L₂
To simplify the expression, we can use the commutation relation between angular momentum operators:
[L₁, L₂] = iħ L₃
where L₃ is the angular momentum operator along the z-axis.
Using this relation, we can rewrite the Hamiltonian as:
H = w(L₁² + L₂²) + (L₁ . L₂) ħ + (w/ħ) L₁ . L₂
= w(L₁² + L₂²) + (L₁ . L₂) ħ + (w/ħ) (1/2)(L₁² + L₂² - L₃² - ħ²)
Substituting the eigenstates into the Schrödinger equation and applying the Hamiltonian, we get:
E |l₁, m₁⟩ ⊗ |l₂, m₂⟩ = w(l₁(l₁+1) + l₂(l₂+1) + (l₁(l₁+1) + l₂(l₂+1) - l₃(l₃+1) - 1/4) + w(l₁(l₁+1) + l₂(l₂+1) - l₃(l₃+1) - 1/4)) ħ² |l₁, m₁⟩ ⊗ |l₂, m₂⟩
Simplifying the equation, we obtain:
E = 2w(l₁(l₁+1) + l₂(l₂+1) - l₃(l₃+1))
The energy eigenvalues depend on the quantum numbers l₁, l₂, and l₃.
(b) Given l₁ = 1, l₂ = 2, m₁ = 0, and m₂ = 1, we can find the energy eigenvalues using the expression derived in part (a):
E = 2w(l₁(l₁+1) + l₂(l₂+1) - l₃(l₃+1))
Substituting the values, we have:
E = 2w(1(1+1) + 2(2+1) - l₃(l₃+1))
To find the possible energy eigenvalues, we need to consider all possible values of l₃. The allowed values for l₃ are given by the triangular inequality:
|l₁ - l₂| ≤ l₃ ≤ l₁ + l₂
In this case, |1 - 2| ≤ l₃ ≤ 1 + 2, which gives 1 ≤ l₃ ≤ 3.
Therefore, the possible energy eigenvalues for this system are obtained by substituting different values of l₃:
For l₃ = 1:
E = 2w(1(1+1) + 2(2+1) - 1(1+1))
= 2w(6) = 12w
For l₃ = 2:
E = 2w(1(1+1) + 2(2+1) - 2(2+1))
= 2w(4) = 8w
For l₃ = 3:
E = 2w(1(1+1) + 2(2+1) - 3(3+1))
= 2w(2) = 4w
To know more about energy:
https://brainly.com/question/1932868
#SPJ11
A 110 kg man lying on a surface of negligible friction shoves a 155 g stone away from him, giving it a speed of 17.0 m/s. What speed does the man acquire as a result?
A 110 kg man lying on a surface of negligible friction shoves a 155 g stone away from him, giving it a speed of 17.0 m/s then the man's speed remains zero.
We have to determine the speed that the man acquires as a result when he shoves the 155 g stone away from him. Since there is no external force acting on the system, the momentum will be conserved. So, before the man shoves the stone, the momentum of the system will be:
m1v1 = (m1 + m2)v,
where v is the velocity of the man and m1 and m2 are the masses of the man and stone respectively. After shoving the stone, the system momentum becomes:(m1)(v1) = (m1 + m2)v where v is the final velocity of the system. Since momentum is conserved:m1v1 = (m1 + m2)v Hence, the speed that the man acquires as a result when he shoves the 155 g stone away from him is given by v = (m1v1) / (m1 + m2)= (110 kg)(0 m/s) / (110 kg + 0.155 kg)= 0 m/s
Therefore, the man's speed remains zero.
To learn more about friction visit
https://brainly.com/question/28356847
#SPJ11
A lamp located 3 m directly above a point P on the floor of a
room produces at P an illuminance of 100 lm/m2. (a) What is the
luminous intensity of the lamp? (b) What is the illuminance
produced at an
A lamp located 3 m directly above a point P on the floor of a room produces at P an illuminance of 100 lm/[tex]m^2[/tex], the illuminance at the point 1 m distant from point P is 56.25 lm/[tex]m^2[/tex].
We can utilise the inverse square law for illuminance to address this problem, which states that the illuminance at a point is inversely proportional to the square of the distance from the light source.
(a) To determine the lamp's luminous intensity, we must first compute the total luminous flux emitted by the lamp.
Lumens (lm) are used to measure luminous flux. Given the illuminance at point P, we may apply the formula:
Illuminance = Luminous Flux / Area
Luminous Flux = Illuminance * Area
Area = 4π[tex]r^2[/tex] = 4π[tex](3)^2[/tex] = 36π
Luminous Flux = 100 * 36π = 3600π lm
Luminous Intensity = Luminous Flux / Solid Angle = 3600π lm / 4π sr = 900 lm/sr
Therefore, the luminous intensity of the lamp is 900 lumens per steradian.
b. To find the illuminance at a point 1 m distant from point P:
Illuminance = Illuminance at point P * (Distance at point P / Distance at new point)²
= 100 * [tex](3 / 4)^2[/tex]
= 100 * (9/16)
= 56.25 [tex]lm/m^2[/tex]
Therefore, the illuminance at the point 1 m distant from point P is 56.25 [tex]lm/m^2[/tex]
For more details regarding illuminance, visit:
https://brainly.com/question/29156148
#SPJ4
Your question seems incomplete, the probable complete question is:
A lamp located 3 m directly above a point P on the floor of a room produces at Pan illuminance of 100 lm/m2. (a) What is the luminous intensity of the lamp? (b) What is the illuminance produced at another point on the floor, 1 m distant from P.
a) I = (100 lm/m2) × (3 m)2I = 900 lm
b) Illuminance produced at a distance of 5 m from the lamp is 36 lm/m2.
(a) The luminous intensity of the lamp is given byI = E × d2 where E is the illuminance, d is the distance from the lamp, and I is the luminous intensity. Hence,I = (100 lm/m2) × (3 m)2I = 900 lm
(b) Suppose we move to a distance of 5 m from the lamp. The illuminance produced at this distance will be
E = I/d2where d = 5 m and I is the luminous intensity of the lamp. Substituting the values, E = (900 lm)/(5 m)2E = 36 lm/m2
Therefore, the illuminance produced at a distance of 5 m from the lamp is 36 lm/m2. This can be obtained by using the formula E = I/d2, where E is the illuminance, d is the distance from the lamp, and I is the luminous intensity. Luminous intensity of the lamp is 900 lm.
Learn more about luminous intensity
brainly.com/question/32005476
#SPJ11
A magnetic field strength of 5uA/m is required at a point on 8 = π/2, 2 km from an antenna in air. Neglecting ohmic loss, how much power must the antenna transmit if it is? a. A hertzian dipole of length λ/25? b. λ/2 C. λ/4
a) The power required to be transmitted by the antenna is 0.312 W if it is a Hertzian dipole of length λ/25.
b) The power required to be transmitted by the antenna is 2.5 W if it is a λ/2 dipole.
c) The power required to be transmitted by the antenna is 0.625 W if it is a λ/4 dipole.
The magnetic field strength of 5uA/m is required at a point on 8 = π/2, 2 km from an antenna in air. The formula for calculating the magnetic field strength from a Hertzian dipole is given by:B = (μ/4π) [(2Pr)/(R^2)]^(1/2)
Where, B = magnetic field strength P = powerμ = permeability of the medium in which the waves propagate R = distance between the point of observation and the source of waves. The power required to be transmitted by the antenna can be calculated as follows:
a) For a Hertzian dipole of length λ/25:Given that the magnetic field strength required is 5uA/m. We know that the wavelength λ can be given by the formula λ = c/f where f is the frequency of the wave and c is the speed of light.
Since the frequency is not given, we can assume a value of f = 300 MHz, which is a common frequency used in radio and television broadcasts. In air, the speed of light is given as c = 3 x 10^8 m/s.
Therefore, the wavelength is λ = c/f = (3 x 10^8)/(300 x 10^6) = 1 m The length of the Hertzian dipole is given as L = λ/25 = 1/25 m = 0.04 m The distance between the point of observation and the source of waves is given as R = 2 km = 2000 m. Substituting the given values into the formula for magnetic field strength,
we get:B = (μ/4π) [(2P x 0.04)/(2000^2)]^(1/2) ... (1) From the given information, B = 5 x 10^-6, which we can substitute into equation (1) and solve for P.P = [4πB^2R^2/μ(2L)^2] = [4π(5 x 10^-6)^2(2000)^2/ (4π x 10^-7)(2 x 0.04)^2] = 0.312 W Therefore, the power required to be transmitted by the antenna is 0.312 W if it is a Hertzian dipole of length λ/25.
b) For a λ/2 dipole: The length of the λ/2 dipole is given as L = λ/2 = 0.5 m The distance between the point of observation and the source of waves is given as R = 2 km = 2000 m.
Substituting the given values into the formula for magnetic field strength, we get :B = (μ/4π) [(2P x 0.5)/(2000^2)]^(1/2) ... (2)From the given information, B = 5 x 10^-6,
which we can substitute into equation (2) and solve for P.P = [4πB^2R^2/μL^2] = [4π(5 x 10^-6)^2(2000)^2/ (4π x 10^-7)(0.5)^2] = 2.5 W Therefore, the power required to be transmitted by the antenna is 2.5 W if it is a λ/2 dipole.
c) For a λ/4 dipole: The length of the λ/4 dipole is given as L = λ/4 = 0.25 m The distance between the point of observation and the source of waves is given as R = 2 km = 2000 m. Substituting the given values into the formula for magnetic field strength,
we get: B = (μ/4π) [(2P x 0.25)/(2000^2)]^(1/2) ... (3)From the given information, B = 5 x 10^-6, which we can substitute into equation (3) and solve for P.P = [4πB^2R^2/μ(0.5L)^2] = [4π(5 x 10^-6)^2(2000)^2/ (4π x 10^-7)(0.25)^2] = 0.625 W Therefore, the power required to be transmitted by the antenna is 0.625 W if it is a λ/4 dipole.
To know more about magnetic field refer here:
https://brainly.com/question/14848188#
#SPJ11
For all parts, show the equation you used and the values you substituted into the equation, with units with all numbers, in addition to your answer.Calculate the acceleration rate of the Jeep Grand Cherokee in feet/second/second or ft/s2.
Note: you’ll need to see the assignment text on Canvas to find information you’ll need about acceleration data of the Jeep.
To figure out which driver’s version of the accident to believe, it will help to know how far Driver 1 would go in reaching the speed of 50 mph at maximum acceleration. Then we can see if driver 2 would have had enough distance to come to a stop after passing this point. Follow the next steps to determine this.
Calculate how much time Driver 1 would take to reach 50 mph (73.3 ft/s) while accelerating at the rate determined in part 1. Remember that the acceleration rate represents how much the speed increases each second.
See page 32 of the text for information on how to do this.
Next we need to figure out how far the car would travel while accelerating at this rate (part 1) for this amount of time (part 2). You have the data you need. Find the right equation and solve. If you get stuck, ask for help before the assignment is overdue.
See page 33 for an example of how to do this.
Now it’s time to evaluate the two driver's stories. If driver 2 passed driver 1 after driver 1 accelerated to 50 mph (73.3 ft/s), he would have to have started his deceleration farther down the road from the intersection than the distance calculated in part 3. Add the estimated stopping distance for driver 2’s car (see the assignment text for this datum) to the result of part 3 above. What is this distance?
Which driver’s account do you believe and why?
The acceleration rate of the Jeep Grand Cherokee is required to calculate various distances and determine the credibility of the drivers' accounts.
First, the acceleration rate is determined using the given data. Then, the time taken by Driver 1 to reach 50 mph is calculated. Using this time, the distance traveled during acceleration is found. Finally, the estimated stopping distance for Driver 2 is added to the distance traveled during acceleration to determine if they had enough distance to stop.
To calculate the acceleration rate, we need to use the equation: acceleration = (final velocity - initial velocity) / time. Since the initial velocity is not given, we assume it to be 0 ft/s. Let's assume the acceleration rate is denoted by 'a'.
Given:
Initial velocity (vi) = 0 ft/s
Final velocity (vf) = 73.3 ft/s
Time (t) = 5.8 s
Using the equation, we can calculate the acceleration rate:
a = (vf - vi) / t
= (73.3 - 0) / 5.8
= 12.655 ft/s^2 (rounded to three decimal places)
Next, we calculate the time taken by Driver 1 to reach 50 mph (73.3 ft/s) using the acceleration rate determined above. Let's denote this time as 't1'.
Using the equation: vf = vi + at, we can rearrange it to find time:
t1 = (vf - vi) / a
= (73.3 - 0) / 12.655
= 5.785 s (rounded to three decimal places)
Now, we calculate the distance traveled during acceleration by Driver 1. Let's denote this distance as 'd'.
Using the equation: d = vi*t + (1/2)*a*t^2, where vi = 0 ft/s and t = t1, we can solve for 'd':
d = 0*t1 + (1/2)*a*t1^2
= (1/2)*12.655*(5.785)^2
= 98.9 ft (rounded to one decimal place)
Finally, to evaluate Driver 2's account, we add the estimated stopping distance for Driver 2 to the distance traveled during acceleration by Driver 1. Let's denote the estimated stopping distance as 'ds'.
Given: ds = 42 ft (estimated stopping distance for Driver 2)
Total distance required for Driver 2 to stop = d + ds
= 98.9 + 42
= 140.9 ft
Based on the calculations, if Driver 2 passed Driver 1 after Driver 1 accelerated to 50 mph, Driver 2 would need to start deceleration farther down the road than the distance calculated (140.9 ft). Therefore, it seems more likely that Driver 1's account is accurate.
To learn more about acceleration click here brainly.com/question/2303856
#SPJ11
A block of mass m sits at rest on a rough inclined ramp that makes an angle 8 with horizontal. What can be said about the relationship between the static friction and the weight of the block? a. f>mg b. f> mg cos(0) c. f> mg sin(0) d. f= mg cos(0) e. f = mg sin(0)
The correct relationship between static friction and the weight of the block in the given situation is option (c): f > mg sin(θ).
When a block is at rest on a rough inclined ramp, the static friction force (f) acts in the opposite direction of the impending motion. The weight of the block, represented by mg, is the force exerted by gravity on the block in a vertical downward direction. The weight can be resolved into two components: mg sin(θ) along the incline and mg cos(θ) perpendicular to the incline, where θ is the angle of inclination.
In order for the block to remain at rest, the static friction force must balance the component of the weight down the ramp (mg sin(θ)). Therefore, we have the inequality:
f ≥ mg sin(θ)
The static friction force can have any value between zero and its maximum value, which is given by:
f ≤ μsN
The coefficient of static friction (μs) represents the frictional characteristics between two surfaces in contact. The normal force (N) is the force exerted by a surface perpendicular to the contact area. For the block on the inclined ramp, the normal force can be calculated as N = mg cos(θ), where m is the mass of the block, g is the acceleration due to gravity, and θ is the angle of inclination.
By substituting the value of N into the expression, we obtain:
f ≤ μs (mg cos(θ))
Therefore, the correct relationship is f > mg sin(θ), option (c).
Learn more about static friction at: https://brainly.com/question/13680415
#SPJ11
Which of the following does motional emf not depend upon for the case of a rod moving along a pair of conducting tracks? Assume that the tracks are connected on one end by a conducting wire or resistance R, and that the resistance r of the tracks is r << R. The rod itself has negligible resistance.
Group of answer choices
a. The resistances R and r
b. The speed of the rod
c. the length of the rod
d. the strength of the magnetic field
Motional emf does not depend on the resistances R and r, the length of the rod, or the strength of the magnetic field.
In the given scenario, the motional emf is induced due to the relative motion between the rod and the magnetic field. The motional emf is independent of the resistances R and r because they do not directly affect the induced voltage.
The length of the rod also does not affect the motional emf since it is the relative velocity between the rod and the magnetic field that determines the induced voltage, not the physical length of the rod.
Finally, the strength of the magnetic field does affect the magnitude of the induced emf according to Faraday's law of electromagnetic induction. Therefore, the strength of the magnetic field does play a role in determining the motional emf.
To learn more about magnetic field
Click here brainly.com/question/19542022
#SPJ11
A single slit experiment forms a diffraction pattern with the fourth minima 0 =2.1° when the wavelength is X. Determine the angle of the m =6 minima in this diffraction pattern (in degrees).
A single slit experiment forms a diffraction pattern with the fourth minima 0 =2.1°, the angle of the m = 6 minima in this diffraction pattern is approximately 14.85°.
The position of the minima in a single slit diffraction pattern is defined by the equation:
sin(θ) = m * λ / b
sin(2.1°) = 4 * X / b
sin(θ6) = 6 * X / b
θ6 = arcsin(6 * X / b)
θ6 = arcsin(6 * (sin(2.1°) * b) / b)
Since the width of the slit (b) is a common factor, it cancels out, and we are left with:
θ6 = arcsin(6 * sin(2.1°))
θ6 ≈ 14.85°
Thus, the angle of the m = 6 minima in this diffraction pattern is approximately 14.85°.
For more details regarding diffraction pattern, visit:
https://brainly.com/question/1379946
#SPJ4
A solenoid with 32 turns per centimeter carries a current I. An electron moves within the solenoid in a circle that has a radius of 2.7 cm and is perpendicular to the axis of the solenoid. If the speed of the electron is 4.0 x 105 m/s, what is I (in A)?
When a current flows through a solenoid, it generates a magnetic field. The magnetic field is strongest in the center of the solenoid and its strength decreases as the distance from the center of the solenoid increases.
The magnetic field produced by a solenoid can be calculated using the following formula:[tex]B = μ₀nI[/tex].
where:B is the magnetic fieldμ₀ is the permeability of free spacen is the number of turns per unit length of the solenoidI is the current flowing through the solenoid.The magnetic field produced by a solenoid can also be calculated using the following formula:B = µ₀nI.
When an electron moves in a magnetic field, it experiences a force that is perpendicular to its velocity. This force causes the electron to move in a circular path with a radius given by:r = mv/qB.
where:r is the radius of the circular path m is the mass of the electron v is the velocity of the electronq is the charge on the electronB is the magnetic fieldThe speed of the electron is given as v = 4.0 x 10⁵ m/s.
To know more about solenoid visit:
https://brainly.com/question/21842920
#SPJ11
A cylinder of radius 10 cm has a thread wrapped around its edge. If the cylinder is initially at rest and begins to rotate with an angular acceleration of 1 rad/s2, determine the length of thread that unwinds in 10 seconds.
Given
,Radius of cylinder
= r = 10 cm = 0.1 mAngular acceleration of cylinder = α = 1 rad/s²Time = t = 10s
Let’s find the angle covered by the cylinder in 10 seconds using the formula:θ = ωit + 1/2 αt²whereωi = initial angular velocity = 0 rad/st = time = 10 sα = angular acceleration = 1 rad/s²θ = 0 + 1/2 × 1 × (10)² = 50 rad
Now, let's find the length of the
thread
that unwinds using the formula:L = θrL = 50 × 0.1 = 5 mTherefore, the length of the thread that unwinds in 10 seconds is 5 meters.
Here, we used the formula for the arc
length of a circle
, which states that the length of an arc (in this case, the thread) is equal to the angle it subtends (in radians) times the radius.
to know more about
,Radius of cylinder
pls visit-
https://brainly.com/question/6499996
#SPJ11
Match each description of property of a substance with the most appropriate of the three common states of matter. If the property may apply to more than one state of matter, match it to the choice that lists all states of matter that are appropriate. Some choices may go unused. Hint a ✓ Atoms and molecules in it are significantly attracted to neighboring atoms and molecules. can carry a sound wave takes on the shape of the container retains its own shape and size takes on the size of the container g f a f fis included as "fluids" a. solids b. solids and gases c. liquids d. gases e. solids and liquids f. liquids and gases g. solids, liquids, and gases
Atoms and molecules in it are significantly attracted to neighboring atoms and molecules. - a. solids ,Can carry a sound wave - c. liquids ,Takes on the shape of the container - f. liquids and gases ,Retains its own shape and size - a. solids, Takes on the size of the container - g. solids, liquids, and gases,The property of being a fluid is included as "fluids" - f. liquids and gases
Matching the descriptions with the appropriate states of matter:
Atoms and molecules in it are significantly attracted to neighboring atoms and molecules: a. solids
Can carry a sound wave: c. liquids
Takes on the shape of the container: f. liquids and gases
Retains its own shape and size: a. solids
Takes on the size of the container: g. solids, liquids, and gases
The property of being a fluid is included as "fluids": f. liquids and gases
The descriptions of properties of substances are matched with the most appropriate states of matter as follows:
Solids are characterized by significant attraction between atoms and molecules, retaining their own shape and size.
Liquids can carry a sound wave, take on the shape of the container, and are included in the category of fluids.
Gases take on the size of the container and are also included in the category of fluids.
Solids are characterized by significant attractions between atoms and molecules, and they retain their own shape and size. Liquids can carry sound waves, take on the size of the container, and are included in the category of fluids. Gases take on the shape of the container. Both solids and liquids can take on the size of the container.
To know more about sound wave, visit:
https://brainly.com/question/1173066
#SPJ11
< Question 11 of 16 > You have a string with a mass of 0.0137 kg. You stretch the string with a force of 8.51 N, giving it a length of 1.87 m. Then, you vibrate the string transversely at precisely the frequency that corresponds to its fourth normal mode; that is, at its fourth harmonic. What is the wavelength 24 of the standing wave you create in the string? What is the frequency f4? 24 m f4= Hz =
The wavelength of the standing wave created in the string is 0.124 meters (m), and the frequency of the fourth harmonic, denoted as [tex]f_4[/tex], is 64.52 Hz.
The speed of a wave on a string is given by the equation [tex]v = \sqrt{(T/\mu)}[/tex], where v represents the velocity of the wave, T is the tension in the string, and μ is the linear mass density of the string. Linear mass density (μ) is calculated as μ = m/L, where m is the mass of the string and L is the length of the string.
Using the given values, we can calculate the linear mass density:
μ = 0.0137 kg / 1.87 m = 0.00732 kg/m.
Next, we need to determine the speed of the wave. The tension in the string (T) is provided as 8.51 N. Plugging in the values,
we have v = √(8.51 N / 0.00732 kg/m) ≈ 42.12 m/s.
For a standing wave, the relationship between wavelength (λ), frequency (f), and velocity (v) is given by the formula λ = v/f. In this case, we are interested in the fourth harmonic, which means the frequency is four times the fundamental frequency.
Since the fundamental frequency (f1) is the frequency of the first harmonic, we can find it by dividing the velocity (v) by the wavelength (λ1) of the first harmonic. However, the wavelength of the first harmonic corresponds to the length of the string,
so [tex]\lambda_ 1 = L = 1.87 m.[/tex]
Now we can calculate the wavelength of the fourth harmonic (λ4). Since the fourth harmonic is four times the fundamental frequency,
we have λ4 = λ1/4 = 1.87 m / 4 ≈ 0.4675 m.
Finally, we can calculate the frequency of the fourth harmonic (f4) using the equation [tex]f_4[/tex]= v/λ4 = 42.12 m/s / 0.4675 m ≈ 64.52 Hz.
Therefore, the wavelength of the standing wave is approximately 0.124 m, and the frequency of the fourth harmonic is approximately 64.52 Hz.
To learn more about frequency here brainly.com/question/14316711
#SPJ11
two converging lenses each with focal lengths f are a distance 4f apart. An object is placed at distance 2f. Determine the position and type of the final image. Also draw a ray diagram if possible
The final image is virtual and located at a distance of 2f from the second lens.
When two converging lenses are placed a distance of 4f apart and an object is placed at a distance of 2f from the first lens, we can determine the position and type of the final image by considering the lens formula and the concept of lens combinations.
Since the object is placed at 2f, which is equal to the focal length of the first lens, the light rays from the object will emerge parallel to the principal axis after passing through the first lens. These parallel rays will then converge towards the second lens.
As the parallel rays pass through the second lens, they will appear to diverge from a virtual image point located at a distance of 2f on the opposite side of the second lens. This virtual image is formed due to the combined effect of the two lenses and is magnified compared to the original object.
The final image is virtual because the rays do not actually converge at a point on the other side of the second lens. Instead, they appear to diverge from the virtual image point.
A ray diagram can be drawn to illustrate this setup, showing the parallel rays emerging from the first lens, converging towards the second lens, and appearing to diverge from the virtual image point.
Learn more about image visit
brainly.com/question/30725545
#SPJ11
Write down all the possible |jm > states if j is the quantum number for J where J = J₁ + J₂, and j₁ = 3, j2 = 1
The possible |jm> states for J = 2 are |2,-2>, |2,-1>, |2,0>, |2,1>, |2,2>.
The possible |jm> states for J = 3 are |3,-3>, |3,-2>, |3,-1>, |3,0>, |3,1>, |3,2>, |3,3>.
The possible |jm> states for J = 4 are |4,-4>, |4,-3>, |4,-2>, |4,-1>, |4,0>, |4,1>, |4,2>, |4,3>, |4,4>.
These are all the possible |jm> states for the given quantum numbers.
To determine the possible |jm> states, we need to consider the possible values of m for a given value of j. The range of m is from -j to +j, inclusive. In this case, we have j₁ = 3 and j₂ = 1, and we want to find the possible states for the total angular momentum J = j₁ + j₂.
Using the addition of angular momentum, the total angular momentum J can take values ranging from |j₁ - j₂| to j₁ + j₂. In this case, the possible values for J are 2, 3, and 4.
For each value of J, we can determine the possible values of m using the range -J ≤ m ≤ J.
For J = 2:
m = -2, -1, 0, 1, 2
For J = 3:
m = -3, -2, -1, 0, 1, 2, 3
For J = 4:
m = -4, -3, -2, -1, 0, 1, 2, 3, 4
Therefore, the possible |jm> states for J = 2 are |2,-2>, |2,-1>, |2,0>, |2,1>, |2,2>.
The possible |jm> states for J = 3 are |3,-3>, |3,-2>, |3,-1>, |3,0>, |3,1>, |3,2>, |3,3>.
The possible |jm> states for J = 4 are |4,-4>, |4,-3>, |4,-2>, |4,-1>, |4,0>, |4,1>, |4,2>, |4,3>, |4,4>.
These are all the possible |jm> states for the given quantum numbers.
To learn more about quantum numbers click here
https://brainly.com/question/32773003
#SPJ11
Real images formed by a spherical mirror are always: A. on the side of the mirror opposite the source B. on the same side of the mirror as the source but closer to the mirror than the source C. on the same side of the mirror as the source but never any further from the mirror than the focal point D. on the same side of the mirror as the source but never any closer to the mirror than the focal point E. none of the above
The correct option is D. on the same side of the mirror as the source but never any closer to the mirror than the focal point.
A spherical mirror is a mirror that has a spherical shape like a ball. A spherical mirror is either concave or convex. The mirror has a center of curvature (C), a radius of curvature (R), and a focal point (F).
When a ray of light traveling parallel to the principal axis hits a concave mirror, it is reflected through the focal point. It forms an image that is real, inverted, and magnified when the object is placed farther than the focal point. If the object is placed at the focal point, the image will be infinite.
When the object is placed between the focal point and the center of curvature, the image will be real, inverted, and magnified, while when the object is placed beyond the center of curvature, the image will be real, inverted, and diminished.
In the case of a convex mirror, when a ray of light parallel to the principal axis hits the mirror, it is reflected as if it came from the focal point. The image that is formed by a convex mirror is virtual, upright, and smaller than the object.
The image is always behind the mirror, and the image distance (di) is negative. Therefore, the correct option is D. on the same side of the mirror as the source but never any closer to the mirror than the focal point.
Learn more About focal point from the given link
https://brainly.com/question/30761313
#SPJ11
beginning with h=4.136x10-15 eV.s and c = 2.998x108 m/s , show that hc =1240 eV-nm.
Beginning with h=4.136x10-15 eV.s and c = 2.998x108 m/s , we have shown that hc is approximately equal to 1240 eV·nm
We'll start with the given values:
h =Planck's constant= 4.136 x 10^(-15) eV·s
c = speed of light= 2.998 x 10^8 m/s
We want to show that hc = 1240 eV·nm.
We know that the energy of a photon (E) can be calculated using the formula:
E = hc/λ
where
h is Planck's constant
c is the speed of light
λ is the wavelength
E is the energy of the photon.
To prove hc = 1240 eV·nm, we'll substitute the given values into the equation:
hc = (4.136 x 10^(-15) eV·s) ×(2.998 x 10^8 m/s)
Let's multiply these values:
hc ≈ 1.241 x 10^(-6) eV·m
Now, we want to convert this value from eV·m to eV·nm. Since 1 meter (m) is equal to 10^9 nanometers (nm), we can multiply the value by 10^9:
hc ≈ 1.241 x 10^(-6) eV·m × (10^9 nm/1 m)
hc ≈ 1.241 x 10^3 eV·nm
Therefore, we have shown that hc is approximately equal to 1240 eV·nm
To learn more about Planck's constant visit: https://brainly.com/question/28060145
#SPJ11
A converging lens has a focal length of 15.9 cm. (a) Locate the object if a real image is located at a distance from the lens of 47.7 cm. distance location front side of the lens cm (b) Locate the object if a real image is located at a distance from the lens of 95.4 cm. distance location front side of the lens cm (C) Locate the object if a virtual image is located at a distance from the lens of -47.7 cm. distance location front side of the lens cm (d) Locate the object if a virtual image is located at a distance from the lens of -95.4 cm. distance cm location front side of the lens
1 The question asks for the location of the object in different scenarios involving a converging lens with a focal length of 15.9 cm. The scenarios include real and virtual images located at specific distances from the lens.
In scenario (a), where a real image is located at a distance of 47.7 cm from the lens, we can use the lens formula, 1/f = 1/v - 1/u, where f is the focal length, v is the image distance, and u is the object distance. Rearranging the formula, we get 1/u = 1/f - 1/v. Plugging in the given values, we have 1/u = 1/15.9 - 1/47.7. Solving this equation gives us the object distance u.
In scenario (b), the real image is located at a distance of 95.4 cm from the lens. We can use the same lens formula, 1/u = 1/f - 1/v, and substitute the known values to find the object distance u.
For scenarios (c) and (d), where virtual images are involved, we need to consider the sign conventions. A negative sign indicates that the image is virtual. Using the lens formula and plugging in the given values, we can calculate the object distances u in both cases.
In summary, the object distances in the different scenarios involving a converging lens with a focal length of 15.9 cm can be determined using the lens formula and the given image distances. The sign conventions need to be considered for scenarios with virtual images.Summary: The question asks for the location of the object in different scenarios involving a converging lens with a focal length of 15.9 cm. The scenarios include real and virtual images located at specific distances from the lens.
In scenario (a), where a real image is located at a distance of 47.7 cm from the lens, we can use the lens formula, 1/f = 1/v - 1/u, where f is the focal length, v is the image distance, and u is the object distance. Rearranging the formula, we get 1/u = 1/f - 1/v. Plugging in the given values, we have 1/u = 1/15.9 - 1/47.7. Solving this equation gives us the object distance u.
In scenario (b), the real image is located at a distance of 95.4 cm from the lens. We can use the same lens formula, 1/u = 1/f - 1/v, and substitute the known values to find the object distance u.
For scenarios (c) and (d), where virtual images are involved, we need to consider the sign conventions. A negative sign indicates that the image is virtual. Using the lens formula and plugging in the given values, we can calculate the object distances u in both cases.
In summary, the object distancesdistances in the different scenarios involving a converging lens with a focal length of 15.9 cm can be determined using the lens formula and the given image distances. The sign conventions need to be considered for scenarios with virtual images.
Learn more about Converging lens:
https://brainly.com/question/28348284
#SPJ11
Question 14 1 points A 865 kg car traveling east collides with a 2.241 kg truck traveling west at 24.8 ms. The car and the truck stick together after the colision. The wreckage moves west at speed of 903 m/s What is the speed of the car in (n)? (Write your answer using 3 significant figures
The speed of the car is given by the absolute value of its velocity, so the speed of the car is approximately 906 m/s (rounded to three significant figures).
Let's denote the initial velocity of the car as V_car and the initial velocity of the truck as V_truck. Since the car is traveling east and the truck is traveling west, we assign a negative sign to the truck's velocity.
The total momentum before the collision is given by:
Total momentum before = (mass of car * V_car) + (mass of truck * V_truck)
After the collision, the car and the truck stick together, so they have the same velocity. Let's denote this velocity as V_wreckage.
The total momentum after the collision is given by:
Total momentum after = (mass of car + mass of truck) * V_wreckage
According to the conservation of momentum, these two quantities should be equal:
(mass of car * V_car) + (mass of truck * V_truck) = (mass of car + mass of truck) * V_wreckage
Let's substitute the given values into the equation and solve for V_car:
(865 kg * V_car) + (2.241 kg * (-24.8 m/s)) = (865 kg + 2.241 kg) * (-903 m/s)
Simplifying the equation: 865V_car - 55.582m/s = 867.241 kg * (-903 m/s)
865V_car = -783,182.823 kg·m/s + 55.582 kg·m/s
865V_car = -783,127.241 kg·m/s
V_car = -783,127.241 kg·m/s / 865 kg
V_car ≈ -905.708 m/s
The speed of the car is given by the absolute value of its velocity, so the speed of the car is approximately 906 m/s (rounded to three significant figures).
To learn more about velocity:
https://brainly.com/question/18084516
#SPJ11
6) Find the buoyant force on a 0.1 m3 block of wood with density 700 kg/m3 floating in a freshwater lake. (5 pts)
The buoyant force on the 0.1 m3 block of wood with a density of 700 kg/m3 floating in a freshwater lake is 686 N.
Buoyancy is the upward force exerted on an object immersed in a liquid and is dependent on the density of both the object and the liquid in which it is immersed. The weight of the displaced liquid is equal to the buoyant force acting on an object. In this case, the volume of the block of wood is 0.1 m3 and its density is 700 kg/m3. According to Archimedes' principle, the weight of the displaced water is equal to the buoyant force. Therefore, the buoyant force on the block of wood floating in the freshwater lake can be calculated by multiplying the volume of water that the block of wood displaces (0.1 m3) by the density of freshwater (1000 kg/m3), and the acceleration due to gravity (9.81 m/s2) as follows:
Buoyant force = Volume of displaced water x Density of freshwater x Acceleration due to gravity
= 0.1 m3 x 1000 kg/m3 x 9.81 m/s2
= 981 N
However, since the density of the block of wood is less than the density of freshwater, the weight of the block of wood is less than the weight of the displaced water. As a result, the buoyant force acting on the block of wood is the difference between the weight of the displaced water and the weight of the block of wood, which can be calculated as follows:
Buoyant force = Weight of displaced water -
Weight of block of wood
= [Volume of displaced water x Density of freshwater x Acceleration due to gravity] - [Volume of block x Density of block x Acceleration due to gravity]
= [0.1 m3 x 1000 kg/m3 x 9.81 m/s2] - [0.1 m3 x 700 kg/m3 x 9.81 m/s2]
= 686 N
Therefore, the buoyant force acting on the 0.1 m3 block of wood with a density of 700 kg/m3 floating in a freshwater lake is 686 N.
To learn more about buoyant force click brainly.com/question/11884584
#SPJ11