Answer:
0.118 mol of gas and has a volume of 2.57 l . part a if an additional 0.122 mol of gas is added to the balloon (at the same temperature and pressure), what will its final volume be
Explanation:
688
question every atom in the universe emits energy in the form of a nucleus. responses true true false
The given statement "every atom in the universe emits energy in the form of a nucleus" is False.
In the universe, every atom does not emit energy in the form of a nucleus. It is not true in the case of every atom in the universe. But it is true that every atom in the universe emits energy.
According to the Bohr model of the atom, an electron orbiting an atomic nucleus emits radiation when it changes its energy level. The radiation emitted by the electron is in the form of a photon of electromagnetic energy. This is a spontaneous process and it is called spontaneous emission. It can be said that every atom in the universe emits energy.
Therefore, it is false that every atom in the universe emits energy in the form of a nucleus.
To know more about the atom, refer here:
https://brainly.com/question/1566330#
#SPJ4
amy combined 10.0 ml of 1.0 m hcl with 5.0 ml of 2.0 m naoh. will the reaction have reached its equivalence point once the reaction is complete?
The reaction has reached its equivalence point once it is complete.
To determine if the reaction has reached its equivalence point once the reaction is complete, we must first calculate the moles of each compound:
HCl moles = 1.0 M x (10.0 mL / 1000 mL/L) = 0.01 mol
NaOH moles = 2.0 M x (5.0 mL / 1000 mL/L) = 0.01 mol
The two compounds react in a 1:1 ratio.
There are now no more moles of HCl or NaOH left to react since they have equal moles.
We can thus conclude that the reaction has reached its equivalence point as soon as the reaction is over. Since the moles of both HCl and NaOH have been completely neutralized, the pH at the equivalence point is 7.
This indicates that the reaction has reached its equivalence point once it has finished.
To learn more about equivalence point refer - https://brainly.com/question/29385269
#SPJ11
a substance has a ph that is lower than the ph of household bleach but higher than the ph of egg whites. based on this information, the substance is
The substance with a pH that is lower than bleach but higher than egg whites would have a pH between 8 and 12.
What is pH?pH is a measure of the acidity or basicity (alkalinity) of a solution. It is measured on a scale from 0 to 14, with a pH of 7 considered neutral. pH values below 7 indicate acidity, while pH values above 7 indicate basicity.
Household bleach has a pH of around 12-13, while egg whites have a pH of around 7-8. Therefore, the substance with a pH that is lower than bleach but higher than egg whites would have a pH between 8 and 12.
Substances with a pH in this range include baking soda (pH around 9), milk of magnesia (pH around 10), and ammonia solution (pH around 11). However, without further information, it is impossible to determine the exact substance with certainty.
Learn more about pH here: https://brainly.com/question/26424076
#SPJ1
which of the following properties affects a substance's saturation temperature? multiple choice question. pressure mass volume
The property that affects a substance's saturation temperature is Pressure.
What is saturation temperature?Saturation temperature is the temperature at which a liquid and a gas have the same vapor pressure. The vapor pressure of a liquid is affected by temperature, and at the saturation temperature, the vapor pressure of the liquid equals the pressure of the surrounding atmosphere.
A substance's saturation temperature is influenced by several variables. Pressure is one of the variables that influences the saturation temperature of a substance. When the pressure surrounding a substance rises, its saturation temperature rises.
Read more about mass:
https://brainly.com/question/19385703
#SPJ11
a quantity of electric charge deposits 0.732 g of ag(s) from an aqueous solution of silver nitrate. when that same quantity of charge is passed through a solution of a gold salt, 0.446 g of au(s) is formed. what is the oxidation state of the gold ion in the salt?
According to the second law of Faraday, the oxidation number of gold ions is +3.
What is the second law of Faraday?The second law of Faraday is also known as Faraday's law of electrolysis. According to this, the quantity of a substance that is deposited or released during electrolysis is directly proportional to the amount of electric charge that is transported through the electrolyte.
Given information,
Mass of silver (Ag) deposited = 0.732 g
Mass of gold (Au) deposited = 0.446 g
According to this law,
Weight of Ag/Equivalent weight of Ag = Weight of Au/Equivalent weight of Au
0.732/108 = 0.446/196.96 × valency
Since the equivalent weight of Ag is 108g and the equivalent weight of Au is 196.96g.
0.0067 = 0.0022 × valency
Valency = 0.0067/ 0.0022
Valency = 3
Therefore, the oxidation state of the gold ion (Au⁺³) is +3.
Learn more about Faraday's law, here:
https://brainly.com/question/1640558
#SPJ6
calculate the molarity of the two solutions. the first solution contains 0.500 mol of naoh in 2.30 l of solution.
The molarity of the first solution containing 0.500 mol of NaOH in 2.30 l of the solution is 0.217 M.
The molarity of a solution is defined as the number of moles of solute per liter of solution. In order to calculate the molarity of the given solution, we need to divide the number of moles of solute by the volume of the solution given in liters. Using the formula for molarity, we have;
Molarity = Number of moles of solute / Volume of solution in liters
Given, Number of moles of solute = 0.500 mol
Volume of solution = 2.30 L
Substitute the values of the given information into the molarity formula; Molarity = 0.500 mol / 2.30 L = 0.217 M
You can learn more about molarity at: brainly.com/question/16727614
#SPJ11
calculate the molarity of a solution prepared by mixing 100.0 ml of the solution made in number 3 with 900.0 ml of 0.0250 m nacl.
The molarity of the solution prepared by mixing 100.0 ml of the solution made in number 3 with 900.0 ml of 0.0250 m NaCl is 0.1225 M.
We first calculate the moles of NaCl present in 900.0 ml of 0.0250 m NaCl solution.The formula to calculate the moles of solute is given as:
Moles of solute = molarity x volume (in liters)
So, the moles of NaCl in 900.0 ml of 0.0250 m NaCl solution would be:
Moles of NaCl = 0.0250 x (900.0/1000) = 0.0225 mol
Calculate the total volume of the mixed solution.The total volume of the mixed solution would be the sum of the volumes of the two solutions used in the mixing process.Total volume of mixed solution = 100.0 ml + 900.0 ml = 1000.0 ml or 1.0 L
Calculate the total number of moles of NaCl in the mixed solution.Total moles of NaCl in the mixed solution = moles of NaCl in 900.0 ml of 0.0250 m NaCl solution + moles of NaCl in 100.0 ml of the solution made in number 3
Total moles of NaCl in the mixed solution = 0.0225 mol + 0.100 mol = 0.1225 mol
Calculate the molarity of the mixed solution.The molarity of the mixed solution would be the number of moles of solute present in the solution per liter of solution.
Molarity of the mixed solution = Total moles of NaCl in the mixed solution / Total volume of the mixed solution
Molarity of the mixed solution = 0.1225 mol / 1.0 L = 0.1225 M
Therefore, the molarity of the solution prepared by mixing 100.0 ml of the solution made in number 3 with 900.0 ml of 0.0250 m NaCl is 0.1225 M.
More on molarity: https://brainly.com/question/30363118
#SPJ11
certain reaction has an activation energy of 34.34 kj/mol. 34.34 kj / mol. at what kelvin temperature will the reaction proceed 3.00 3.00 times faster than it did at 357 k?
Certain reaction has an activation energy of 34.34 kj/mol. At 428.0 kelvin temperature will the reaction proceed 3.00 3.00 times faster than it did at 357 k?
The physical concept of temperature indicates in numerical form how hot or cold something is. A thermometer is used to determine temperature. Thermometers are calibrated using a variety of temperature scales, which historically defined distinct reference points and thermometric substances. The most popular scales are the Celsius scale, sometimes known as centigrade, with the unit symbol °C, the Fahrenheit scale (°F), and the Kelvin scale (K), with the latter being mostly used for scientific purposes. One of the International System of Units' (SI) seven base units is the kelvin.
k1/k2 = [tex]e^{((Ea/R) * ((1/T2) - (1/T1)}[/tex]
Ea = 34.34 kJ/mol × 1000 J/kJ
= 34,340 J/mol
3.00 = [tex]e^{((34,340 J/mol / (8.314 J/mol K)) × ((1/T2) - (1/357 K)))}[/tex]
ln(3.00) = (34,340 J/mol / (8.314 J/mol K))×((1/T2) - (1/357 K))
T2 = 1 / (ln(3.00) / (34,340 J/mol / (8.314 J/mol K)) + (1/357 K)) = 428.0 K
To know more about temperature, here:
https://brainly.com/question/7510619
#SPJ12
metallic bonds... metallic bonds... a. ...allow for high electrical conductivity in a material. b. ...are non-directional. c. ...allow a material to plastically deform.
Metallic bonds a. allow for high electrical conductivity in a material. Metallic bonds are non-directional. They also allow a material to plastically deform.
Metallic bonding is the bonding between the positively charged nuclei of metal atoms and the electrons in the metal's outermost electron shell. Metallic bonding in metals is believed to be like a sea of electrons that are free to move throughout the entire metallic crystal. This is why metals conduct heat and electricity so effectively, making them excellent conductors.
The atoms in a metal are not held together by covalent bonds, but rather by metallic bonds. They are typically held together in a crystal lattice. The electrons in metals are not held to any specific atom or molecule, but rather they move around freely among the metal atoms' positively charged ion cores. The metallic bond is a non-directional bond. The electrons in the metal are delocalized, which means they are free to move around the metal lattice.
As a result, metals are malleable and ductile, meaning they can be formed into sheets or drawn into wires. Metals can also be deformed without being broken or shattered because the metallic bond is non-directional. In general, metals are good conductors of electricity and heat because their free electrons can easily move in response to an electric or thermal current. So, the correct option are: metallic bonds allow for high electrical conductivity in a material, metallic bonds are non-directional, and metallic bonds allow a material to plastically deform.
Learn more about covalent bonds at:
https://brainly.com/question/11674395
#SPJ11
calculate the volume in liters of a 0.020mm barium chlorate solution that contains 375.mmol of barium chlorate . be sure your answer has the correct number of significant digits.
The volume in liters of a 0.020mm barium chlorate solution that contains 375 mmol of barium chlorate is 18.75 L.
To calculate the volume of barium chlorate in liters, we can use the formula of concentration. The formula of concentration is
C = n/V
where
C = Concentration
n = moles of the solute
V = volume of the solution
To calculate the volume of the solution in liters, we need to first calculate the moles of the solute ([tex]BaCl_{2}[/tex]). We are given moles of [tex]BaCl_{2}[/tex] = 375 mmol
Now, n = 375 mmol. So, by using the formula of concentration:
C = n/VC = 0.020 mm
V = n/CV
= 375 mmol/0.020 mmV
= 18750 mL
We know that 1 L = 1000 mL. So, the volume of the solution in liters
= 18750/1000L
= 18.75 L
Thus, the volume of the solution in liters is 18.75 L.
For more information about formula of concentration refers to the link: https://brainly.com/question/13114297
#SPJ11
calculate the enthalpy change when 100. g of ice at 0.0 oc is heated to liquid water at 50.0oc. (the heat of fusion for water is 333 j/g.)
The enthalpy change when 100. g of ice at 0.0°C is heated to liquid water at 50.0°C is equal to 333J/g x 100g = 33300 J.
This is because the heat of fusion of water is 333J/g and it takes 33300J of energy to melt 100g of ice at 0.0°C.
The process of melting the ice can be broken down into two steps. First, the ice needs to be heated from 0.0°C to its melting point (0.0°C).
This requires energy to overcome the intermolecular forces that are keeping the ice solid, but no heat is absorbed or released. Second, the ice needs to be heated from its melting point to 50.0°C.
This is when the heat of fusion is released and 333J of energy is absorbed for every gram of ice melted. Therefore, 333J/g x 100g = 33300J of energy must be supplied to the system for the ice to melt and reach 50.0°C.
To know more about heat of fusion click on below link:
https://brainly.com/question/14053504#
#SPJ11
which solution has the highest vapor pressure? 20.0 g of glucose in 100.0 ml of water 20.0 g of sucrose in 100.0 ml of water 10.0 g of potassium acetate in 100.0 ml of water
The solution that has the highest vapor pressure is the one with the lowest boiling point. The lower the boiling point, the higher the vapor pressure.
What is Vapor Pressure?Vapor pressure is the pressure exerted by the vapor of a substance in equilibrium with its liquid or solid phase. When the rate of evaporation and the rate of condensation is equal, equilibrium occurs. At a particular temperature, each liquid has a distinct vapor pressure that is directly proportional to its temperature. A liquid with a low boiling point has a higher vapor pressure than one with a high boiling point.
The glucose and sucrose solutions are both nonvolatile solutes, whereas potassium acetate is a volatile solute. As a result, the potassium acetate solution has a higher vapor pressure than either the glucose or sucrose solutions. The answer is option C.10.0 g of potassium acetate in 100.0 ml of water.
Read more about pressure:
https://brainly.com/question/28012687
#SPJ11
determine the number of atoms in 15.0 grams of calcium, ca. (the mass of one mole of calcium is 40.08 g.)
To determine the number of atoms in 15.0 grams of calcium, we need to calculate the molar mass of calcium.
The molar mass of calcium is 40.08 g/mol. This means that for every 1 mole of calcium, there are 40.08 grams. Since we have 15.0 grams of calcium, we can divide this by the molar mass to find the number of moles of calcium. 15.0 g / 40.08 g/mol = 0.37 moles of calcium. To find the number of atoms in 15.0 grams of calcium, we need to multiply the number of moles of calcium by Avogadro's number. 0.37 moles x 6.022 x 1023 atoms/mol = 2.223 x 1023 atoms of calcium.
Therefore, there are 2.223 x 1023 atoms of calcium in 15.0 grams of calcium.
For more questions on molar mass
https://brainly.com/question/21334167
#SPJ11
consider the equilibrium reaction between mgo (s) and co2 (g) resulting in the formation of mgco3 (s). which one of the following factors will affect both the value of the equilibrium constant and the position of equilibrium? (you may need to write the balanced chemical equation)
Magnesium carbonate breaks down into solid magnesium (MgO) & gaseous carbon dioxide in the aforementioned mechanism, which is a chemical property (CO2).
A fundamental chemical equation is what?In these equations, chemical reactions are represented by chemical formulae and symbols. Chemical equations have two sides: the reactants are on the left, and the products are on the right.
What is an illustration of a chemical equation?Chemical equations represent the transformation of reactants into products in this process. Take the combination of iron (Fe) with sulfur (S) to create iron sulfide as an example. Fe(s) = S(s) + FeS (s) Iron and sulfur react, as indicated by the plus symbol.
To know more about Chemical equation visit:
https://brainly.com/question/30087623
#SPJ1
why does different isotopes of the same sample have different scatering signal in neutron experiement ?
Answer: Different isotopes of the same sample have different scattering signals in neutron experiments due to their varying neutron cross-sections.
The term neutron scattering refers to a type of scattering in which neutrons collide with a target material, resulting in the emission of secondary particles. Because the neutron is a subatomic particle, it cannot be directly detected.
The effect of its presence, however, can be seen in the pattern of scattered secondary particles. Neutrons are scattered in much the same way that light is, except that they are much less affected by surface roughness and other surface-related issues.
This implies that neutron scattering is a more efficient tool for investigating material microstructures than other kinds of scattering. Neutron scattering's biggest advantage is its sensitivity to the atomic nuclei of a sample's constituent atoms.
Neutrons, unlike other subatomic particles, have no electric charge, making them less likely to be deflected by the electrons surrounding atomic nuclei, and more likely to penetrate deep into a sample's interior.
As a result, neutron scattering may reveal information about the locations and movements of atomic nuclei in materials that is inaccessible to other methods. Cross-sections of neutron scattering: The cross-section of a neutron scattering material is the probability of a neutron scattering off that material.
In other words, it's the ratio of the number of neutrons scattered per second per unit area of material to the number of neutrons striking the material per second per unit area.
Because the probability of a neutron scattering off a given isotope varies based on the neutron's energy and the isotopes present, the cross-section of a sample's individual isotopes influences the total neutron scattering signal produced by the sample.
Different isotopes of the same sample have different scattering signals in neutron experiments due to their varying neutron cross-sections.
Learn more about isotopes here:
https://brainly.com/question/11680817#
#SPJ11
a solution is 0.30 m in nh3. what concentration of nh4cl would be required to achieve a buffer solution with a final ph of 9.0? recall the hh equation can be written using ph and pka or poh and pkb.
2.69 M of NH4Cl must be added to the solution to create a buffer with a final pH of 9.
A buffer solution is a solution that resists changes in pH when small quantities of an acid or base are added to it. A buffer solution is a solution that can resist changes in pH when acid or base is added to it.
The Henderson-Hasselbalch equation, which relates the pH of a buffer solution to the dissociation equilibrium constant of the weak acid, may be used to determine the pH of a buffer solution. Pka and pH can be used to derive the Henderson-Hasselbalch equation, which is as follows: pH = pKa + log([A-]/[HA]). Here, [A-] is the concentration of conjugate base, and [HA] is the concentration of weak acid. A buffer solution is created by combining a weak acid with its corresponding conjugate base, or a weak base with its corresponding conjugate acid.
When a buffer solution is formed from a weak acid and its conjugate base, it is referred to as an acidic buffer. A buffer solution made up of a weak base and its corresponding conjugate acid is known as a basic buffer. The final pH of a buffer solution is determined by the ratio of the weak acid or base to the conjugate base or acid, as determined by the Henderson-Hasselbalch equation.
pH can be calculated using the following equation: pH = pKa + log([A-]/[HA]). The NH3-NH4+ buffer is commonly used in laboratories. It is made up of ammonia (NH3) and ammonium (NH4+) in a specific ratio. NH3 is a weak base with a Kb value of 1.8 × 10−5, while NH4+ is its conjugate acid, and its Ka value is 5.6 × 10−10.In this problem, we must determine the concentration of NH4Cl required to create a buffer solution with a final pH of 9. Using the Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA]). Since the solution is 0.30 M in NH3, we know that the [A-] is 0.30 M. We must now figure out what the [HA] is to calculate the concentration of NH4Cl necessary. pH can be rearranged in the following manner: pH = pKa + log([A-]/[HA])pH - pKa = log([A-]/[HA])10^(pH - pKa) = [A-]/[HA]. We can find pKa using the Kb value of NH3: Kw = Ka × Kb = 1 × 10^-14 = 5.6 × 10^-10 × 1.8 × 10^-5Ka = 5.6 × 10^-10 / 1.8 × 10^-5 = 3.11 × 10^-6pKa = -log(Ka) = 5.51. Now, we can calculate [HA] using the following equation: [A-]/[HA] = 10^(pH - pKa) = 10^(9 - 5.51) = 0.0301. Thus, the ratio of [A-]/[HA] is 0.30/0.0301 = 9.97.
This implies that we must add NH4Cl to the solution in order to create an ammonium/ammonia buffer with a ratio of 9.97:1. To achieve this ratio, we must add NH4Cl in such a way that the [NH4+] is 9.97 times higher than the [NH3]. Assuming that the volume of the solution is 1 L, the [NH3] is 0.30 M, and the desired ratio is 9.97:1, we can compute the [NH4+] that will be necessary:[NH4+] = [NH3] × ratio = 0.30 M × 9.97 = 2.99 M. We can now calculate the amount of NH4Cl that must be added to the solution using the following equation:2.99 M - 0.30 M = 2.69 M. Therefore, 2.69 M of NH4Cl must be added to the solution to create a buffer with a final pH of 9.
To know more about buffer click here:
https://brainly.com/question/19093015
#SPJ11
why is it important not to dilute the initial sample befoe it has been loaded onto the chromatography column
It is important not to dilute the initial sample before loading it onto the chromatography column because this can negatively impact the separation and resolution of the components in the sample.
Dilution can lead to a decrease in the concentration of the components in the sample, which can result in poor separation and overlap of the peaks. Additionally, dilution can cause loss of the target compound or impurities in the sample due to adsorption onto the walls of the container used for dilution.
By keeping the sample concentrated and loading it directly onto the chromatography column, the chances of obtaining a clear separation and good resolution of the components in the sample are increased
To learn more about chromatography column refer to:
brainly.com/question/30296545
#SPJ4
calculate each of the following quantities in 0.160 mol of C6H14O. calculate the number of atoms of H. calculate the number of atoms of C.
Answer:
To calculate the number of atoms of H and C in 0.160 mol of C6H14O, we need to first determine the number of moles of each element present in C6H14O.
The molecular formula of C6H14O shows that there are 6 carbon atoms, 14 hydrogen atoms, and 1 oxygen atom in each molecule of C6H14O.
The molar mass of C6H14O can be calculated as:
Molar mass of C6H14O = (6 × atomic mass of C) + (14 × atomic mass of H) + (1 × atomic mass of O)
= (6 × 12.01 g/mol) + (14 × 1.01 g/mol) + (1 × 16.00 g/mol)
= 86.18 g/mol
Therefore, 0.160 mol of C6H14O has a mass of:
Mass = molar mass × number of moles
= 86.18 g/mol × 0.160 mol
= 13.79 g
Now we can calculate the number of atoms of H and C in 0.160 mol of C6H14O.
Number of atoms of H:
Number of moles of H = 14 × 0.160 mol = 2.24 mol
Number of atoms of H = 2.24 mol × Avogadro's number
= 2.24 mol × 6.022 × 10^23/mol
= 1.35 × 10^24 atoms of H
Therefore, there are 1.35 × 10^24 atoms of hydrogen in 0.160 mol of C6H14O.
Number of atoms of C:
Number of moles of C = 6 × 0.160 mol = 0.96 mol
Number of atoms of C = 0.96 mol × Avogadro's number
= 0.96 mol × 6.022 × 10^23/mol
= 5.78 × 10^23 atoms of C
Therefore, there are 5.78 × 10^23 atoms of carbon in 0.160 mol of C6H14O.
Explanation:
organic molecules are those that contain at least multiple choice carbon. carbon and oxygen. carbon and hydrogen. carbon, oxygen, and hydrogen.
Organic molecules are those that contain carbon and often hydrogen atoms bonded together, and they are the building blocks of life.
Carbon is an element that is essential to life on Earth and is the central atom in organic compounds. It can form covalent bonds with other elements such as hydrogen, oxygen, nitrogen, and sulfur.
Carbon has the unique ability to form long chains of molecules, branched structures, and rings that are essential to the structure and function of organic molecules.
Organic molecules include carbohydrates, lipids, proteins, and nucleic acids. Carbohydrates are sugars and starches that provide energy to living organisms.
Lipids are fats and oils that are important for insulation and energy storage. Proteins are complex molecules that carry out many functions in the body, such as catalyzing chemical reactions and providing structure to cells.
Nucleic acids are DNA and RNA, which carry genetic information and are essential for the synthesis of proteins.
Oxygen is another element that is essential to life on Earth. It is often found in organic molecules, especially in carbohydrates and lipids.
Oxygen is important for respiration, the process by which living organisms use energy stored in organic molecules to carry out cellular processes.
In respiration, oxygen reacts with organic molecules such as glucose to produce carbon dioxide, water, and energy in the form of ATP.
Organic molecules contain carbon and often hydrogen atoms bonded together, and they are the building blocks of life.
Carbon has the unique ability to form long chains of molecules, branched structures, and rings that are essential to the structure and function of organic molecules.
Oxygen is another element that is often found in organic molecules and is important for respiration.
to know more about organic molecules refer here:
https://brainly.com/question/10504103#
#SPJ11
which combination of elements are required for a compound to be considered organic? multiple choice carbon and oxygen carbon and hydrogen sodium and carbon nitrogen and oxygen
The combination of elements that are required for a compound to be considered organic are carbon and hydrogen. The correct answer among the given options is carbon and hydrogen.
Organic compounds are the fundamental components of life and are classified by the presence of carbon atoms, which are covalently linked to one another and to other elements such as oxygen, nitrogen, and sulfur, as well as by the lack of ionic bonding.
To summarize, an organic compound is a compound that contains carbon atoms bonded to hydrogen atoms, among other elements, in a covalent bond. The majority of organic compounds contain a carbon-carbon bond, which is the foundation of organic chemistry.
The following are some examples of organic compounds:
Methane, CH4
Ethanol, C2H5OH
Ethanoic acid, CH3COOH
Acetone, (CH3)2CO
Amino acid glycine, NH2CH2COOH
As a result, the correct combination of elements that are required for a compound to be considered organic are carbon and hydrogen.
For more such questions on elements, click on:
https://brainly.com/question/28424113
#SPJ11
ra and p criss cross method
Answer:
Ra3P2
Explanation:
Ra is +2
P is -3
Ra3P2
Perform the following conversion (a) 2.41x10² cm to meters
Answer:
2.41 m
Explanation:
2.41×10×10=241cm
241÷100=2.41
Read through the following scenarios. Identify the control group, the experimental group, the independent variable, and the dependent variable.
It appears that you are attempting to identify the various elements of each of these tests shown in the scenarios for this topic.
Scenario Therefore, the first scenario is the one in which dogs attempt to assist obese dogs in losing weight. To begin, we need to identify the independent variable. The one thing that the experimenters can influence is the sort of food the dog consumes based on the type of food, which is the independent variable. In this scenario, we're assuming that the type of food affects the weight of the dogs in the hopes that it will change the dependent variable, which is reliant on the independent variable.The group participating in the experiment is known as the experimental group. this situation. The 50 canines who were selected will receive the special food. The control group is any group that is considered to be normal. The 50 dogs who remain on with their regular diet would be the way it would ordinarily be so that you could compare the experiment to what actually occurs. The second scenario involves using sunscreen to treat or prevent sunburn. In this case, the type of sunscreen applied will act as the independent variable, which is something we can control, and the sunburn will act as the dependent variable. The experimental group is going to try to prevent that, so that's what we're interested in doing here to try the new sunscreen, and in this instance, the experimental group will be the arm of the 30 participants.For more information on variables kindly visit to
https://brainly.com/question/17344045
#SPJ1
is the activation energy for a forward reaction the same as the activation energy for the reverse of the same reaction? why or why not?
The activation energy for a forward reaction is not the same as the activation energy for the reverse of the same reaction. It is because of the reason that activation energy is the energy needed for a reaction to occur.
The energy barrier for a forward reaction is distinct from the energy barrier for a backward reaction. The energy required to break bonds in the reactants is known as activation energy.
Only those molecules with sufficient kinetic energy can overcome the activation energy barrier and form new products. The energy that must be overcome in order to transform reactants into products is referred to as activation energy. If the activation energy for a reaction is lower, the reaction will proceed more quickly than if it were higher.
The activation energy of a forward reaction is not the same as the activation energy of a reverse reaction since the energy requirements for each reaction are unique.
To learn more about activation energy refer - https://brainly.com/question/13565255
#SPJ11
the radioactive decay of c14 which is used in estimating the age of archaeological samples follows first order kinetics with a half-life of 5725 years at 300k. if a sample of c114 initially contains 0.0035 mol of c14, how many moles remain after 2500 years.
the radioactive decay of c14 which is used in estimating the age of archaeological after 2500 years, 0.0027 mol of c14 remain in the sample.
The amount of c14 remaining after 2500 years can be calculated using the first-order rate equation:
N(t) = N0 * e^(-kt)
where N0 is the initial amount of c14, N(t) is the amount remaining after time t, k is the decay constant, and e is the base of the natural logarithm. The half-life of c14 is given as 5725 years, which means that k can be calculated as:
k = ln(2)/t1/2 = ln(2)/5725
Substituting the values given in the problem, we get:
k = ln(2)/5725 = 1.21 * 10^-4 /year
Now, we can use the rate equation to find the amount of c14 remaining after 2500 years:
N(2500) = 0.0035 * e^(-1.21*10^-4 * 2500) = 0.0027 mol
For more similar questions on radioactive decay,
brainly.com/question/29107025
#SPJ11
How many atoms are in 32.10 g of He
4.83 x 10^24 atoms are there in 32.10 g of He.
To determine the number of atoms in 32.10 g of He, we first need to convert the mass to moles using the atomic mass of He, which is 4.003 g/mol.
number of moles of He = 32.10 g / 4.003 g/mol = 8.024 mol He
Next, we use Avogadro's number, which is 6.022 x 10^23 atoms/mol, to calculate the number of atoms in 8.024 mol of He:
8.024 mol He x 6.022 x 10^23 atoms/mol = 4.83 x 10^24 atoms
Therefore, there are approximately 4.83 x 10^24 atoms in 32.10 g of He.
Atoms are the fundamental matter units that comprise everything around us, from the air we breathe to the food we consume. They are made up of three different sorts of particles: protons, neutrons, and electrons.
For more such questions on atoms, click on:
https://brainly.com/question/6258301
#SPJ11
PCI3 Draw the Lewis Dot Structure
using many methods I gess I am not good at drawing
what is the specific rotation of pure (s)-carvone if a sample of (r)-carvone of 85% ee has a specific rotation of -52?
(+61.3) is the specific rotation of pure (s)-carvone if a sample of (r)-carvone of 85% ee has a specific rotation of -52.
A chiral chemical compound's unique rotation is a characteristic in chemistry. It is described as the shift in monochromatic plane-polarized light's orientation, expressed as the product of distance and concentration, as the light passes through a sample of a substance dissolved in solution. Dextrorotary substances are those that spin a plane polarised light beam's polarisation plane clockwise, and they correlate to positive specific rotation values.
[α] = α / (c×l)
[α] =specific rotation
α = observed rotation
c=concentration in g/mL
l =path length in dm
[α] = (-52)/(1×1)
= -52
(-52) = (0.85)×αr + (0.15)×αs
αs= (-52 - 0.85×αr) / 0.15
[α] = αs
= (-52 - 0.85αr) / 0.15
(-52) = (0.85)(+112.0) + (0.15)α
α = (+61.3)
To know more about specific rotation, here:
https://brainly.com/question/31610445
#SPJ12
a sample of a compound is decomposed in the laboratory and produces 330 g g carbon, 69.5 g g hydrogen, and 440.4 g g oxygen. calculate the empirical formula of the compound.
The empirical formula of the compound that produces 330 g of carbon, 69.5 g of hydrogen, and 440.4 g of oxygen upon decomposition is CHO2.
How to calculate the empirical formula of a compound?The empirical formula of a compound is the simplest whole-number ratio of atoms present in it. Follow the below steps to calculate the empirical formula of the given compound: Calculate the mass of each element present in the compound.
Calculate the mole of each element present in the compound by dividing its mass by its atomic mass. Determine the mole ratio by dividing each mole value by the smallest mole value obtained. Rearrange the ratio obtained in step 3 in the form of whole numbers. Moles of hydrogen/moles of oxygen = 69.5/27.5 = 2.53 ≈ 2.5Moles of oxygen/moles of oxygen = 27.5/27.5 = 1Therefore, the mole ratio of carbon: hydrogen: oxygen = 1: 2.5: 1Rearranging the above ratio to whole numbers, we get the mole ratio of carbon: hydrogen: oxygen as 2: 5: 2. The empirical formula of the compound is therefore CHO2.
Read more about Moles :
https://brainly.com/question/15356425
#SPJ11
based on your melting points and demo tlc, comment on the success of the extraction experiment. are the tlc and melting points in agreement? which is the purest solid of the three? does the result make sense? explain your answer. (
If we assume that the melting points and TLC are in agreement, then we can use them to determine the purity of the solids.
The purest solid would have the highest melting point and the most distinct TLC spot. We can compare the values to ascertain which solid is the purest if the melting points and TLC are in agreement. It may be a sign that the extraction was unsuccessful or that there were impurities in the sample if there is a significant difference between the melting points or the spots on the TLC.
It's crucial to remember that melting points and TLC are not always accurate indications of purity because other variables can influence them. However, they can be a helpful tool for determining the success of an extraction experiment if the values are consistent and in agreement.
Learn more about melting point
brainly.com/question/40140
#SPJ4