A baseball diamond is a square with a distance of 90ft from home base to first base the area of the baseball, diamond is 8100 square feet.
A baseball precious stone could be a square with a separate of 90ft from the home base, to begin with, a base. Since it could be a square, all sides have the same length, which is 90ft.
To discover the region of the square (baseball jewel), we are able to utilize the equation:
Region = side x side
Substituting the esteem of the side, we get:
Zone = 90ft x 90ft
Rearranging, we get:
Zone = 8100 square feet
In this manner, the zone of the basketball jewel is 8100 square feet.
To learn about similar problems visit:
https://brainly.com/question/3346081
#SPJ4
a A population has a mean of 159.8 kg and a standard deviation of 12.6 kg. Under these circumstances, what z-score correspond to a mass of 148.3 kg? Oz = -1.06 z = -0.91 Oz = -0.85 Oz = 0.91
The z-score corresponding to a mass of 148.3 kg is approximately -0.91.
Z-score is a statistical measurement that describes a value's relationship to the mean of a group of values. Z-score is measured in terms of standard deviations from the mean. If a Z-score is 0, it indicates that the data point's score is identical to the mean score.
A population has a mean of 159.8 kg and a standard deviation of 12.6 kg. To find the z-score corresponding to a mass of 148.3 kg, use the formula: z = (X - μ) / σ, where X is the value (148.3 kg), μ is the mean (159.8 kg), and σ is the standard deviation (12.6 kg).
z = (148.3 - 159.8) / 12.6
z = -11.5 / 12.6
z ≈ -0.91
Know more about z-score here:
https://brainly.com/question/15016913
#SPJ11
use the ti-84 plus calculator to find the -scores that bound the middle of the area under the standard normal curve. enter the answers in ascending order and round to two decimal places.
The -scores that bound the middle of the area under the standard normal curve are -0.99 and 0.99.
To find the -scores that bound the middle of the area under the standard normal curve, we can use the normalcy function on the TI-84 Plus calculator.
1. Press the "2nd" button, then the "Vars" button (which is the "DISTR" button).
2. Scroll down to "2:normalcdf(", and press "Enter".
3. Type "-99", ",99", "0", and "1" (without quotes), and press "Enter" after each number.
4. The calculator will display the area under the standard normal curve between -99 and 99, which is 1.00 (since the standard normal curve is infinite and covers the entire -infinity to infinity range).
5. To find the -scores that bound the middle of the area, we need to find the -scores that bound the area between -1 and 1, which is approximately 0.68 (or 68% of the total area).
6. Press the "2nd" button, then the "Vars" button (which is the "DISTR" button) again.
7. Scroll down to "3:invNorm(", and press "Enter".
8. Type "0.16", "0.84", "0", and "1" (without quotes), and press "Enter" after each number.
9. The calculator will display the -scores that bound the middle 68% of the area under the standard normal curve, which are approximately -0.99 and 0.99 (rounded to two decimal places and in ascending order).
Therefore, the -scores that bound the middle of the area under the standard normal curve are -0.99 and 0.99.
Visit here to learn more about the standard normal curve:
brainly.com/question/28971164
#SPJ11
For each of the following assertions, state whether it is a legitimate statistical hypothesis and why:
a. H: δ>100
b. H: x=45
c. H: s<.20
d. H: δ1/δ2 <1
e. H: X-Y=5
f. H: גּ<.01
where λ is the parameter of an exponential distribution used to model component lifetime
a. H: δ>100 is a legitimate statistical hypothesis because it is a statement about a population parameter (δ) and it is testable using statistical methods.
b. H: x=45 is a legitimate statistical hypothesis because it is a statement about a population parameter (x) and it is testable using statistical methods.
c. H: s<.20 is a legitimate statistical hypothesis because it is a statement about a population parameter (s) and it is testable using statistical methods.
d. H: δ1/δ2 <1 is a legitimate statistical hypothesis because it is a statement about a population parameter (δ1 and δ2) and it is testable using statistical methods.
e. H: X-Y=5 is a legitimate statistical hypothesis because it is a statement about a population parameter (X and Y) and it is testable using statistical methods.
f. H: גּ<.01 is a legitimate statistical hypothesis because it is a statement about a population parameter (λ) and it is testable using statistical methods, with the parameter being the rate parameter of an exponential distribution used to model component lifetime.
Here are the answers for each assertion:
a. H: δ>100 - This is a legitimate statistical hypothesis because it states a specific direction for the population parameter (delta).
b. H: x=45 - This is not a legitimate statistical hypothesis because it refers to a sample statistic (x) rather than a population parameter.
c. H: s<.20 - This is not a legitimate statistical hypothesis because it refers to a sample statistic (s, sample standard deviation) instead of a population parameter.
d. H: δ1/δ2 <1 - This is a legitimate statistical hypothesis because it specifies a relationship between two population parameters (delta1 and delta2).
e. H: X-Y=5 - This is not a legitimate statistical hypothesis because it refers to sample statistics (X and Y) rather than population parameters.
f. H: λ<.01 - This is a legitimate statistical hypothesis because it states a specific direction for the population parameter (lambda) related to the exponential distribution for component lifetime.
Visit here to learn more about statistical hypothesis brainly.com/question/29576929
#SPJ11
Which set of numbers shows the sine, cosine, and tangent of 26°?
find a power series representation for the function. (give your power series representation centered at x
The power series representation for f(x) = 1/(1-x) centered at x=0 is:
1 + x + x^2 + x^3 + ...
To find a power series representation for a function, we can use the formula:
f(x) = ∑(n=0 to infinity) [an(x-a)^n]
where a is the center of the series and an is the coefficient of the (x-a)^n term.
For example, let's find a power series representation for the function f(x) = 1/(1-x) centered at x=0:
Using the formula, we have:
f(x) = ∑(n=0 to infinity) [an(x-0)^n]
To find the coefficients an, we can use the formula for the geometric series:
1/(1-x) = 1 + x + x^2 + x^3 + ...
So, we have:
an = [x^n]/n!
Substituting this into the power series formula, we get:
f(x) = ∑(n=0 to infinity) [(x^n)/(n!)](x-0)^n
Simplifying, we get:
f(x) = ∑(n=0 to infinity) [(x^n)/(n!)]
Therefore, the power series representation for f(x) = 1/(1-x) centered at x=0 is:
1 + x + x^2 + x^3 + ...
Learn more about the Series:
brainly.com/question/15415793
#SPJ11
What does PEMDAS stand for?
I'll give you a Brainliest if you answer correctly!
Answer:
PEMDAS is an acronym that stands for Parentheses, Exponents, Multiplication and Division (from left to right), and Addition and Subtraction (from left to right). It's a helpful mnemonic device to remember the order of operations in arithmetic and algebraic equations. When solving a mathematical expression or equation, it's important to follow PEMDAS to ensure that the solution is accurate and consistent.
Answer:
by Paige Faber, ACDC Peer Advisor. Remember in seventh grade when you were discussing the order of operations in math class and the teacher told you the catchy acronym, “PEMDAS” (parenthesis, exponents, multiplication, division, addition, subtraction) to help you remember?
Step-by-step explanation:
HI
if there are 10 family practice physicians at center clinic and 2 pediatricians, what is the ratio of family practice physicians to pediatricians? how might this ratio be used by the clinic administrator?
The ratio of family practice physicians to pediatricians is 5:1.
The ratio of family practice physicians to pediatricians can be found by dividing the number of family practice physicians by the number of pediatricians:
Ratio = Number of family practice physicians / Number of pediatricians
Ratio = 10 / 2
Ratio = 5
Therefore, the ratio of family practice physicians to pediatricians is 5:1.
The clinic administrator can use this ratio to assess the balance of the clinic's medical staff. If the ratio is not ideal, the administrator may need to take steps to hire more pediatricians or family practice physicians to better meet the needs of the clinic's patients.
Additionally, the ratio can be used to allocate resources, such as staff time and medical equipment, more effectively based on the patient population the clinic serves.
To know more about ratios follow
https://brainly.com/question/28580100
#SPJ1
if event a and event b are independentP(a | b) = 0.35P(b) = 0.5find P(a)
If events A and B are independent, then P(A and B) = P(A) * P(B). Also, from Bayes' theorem we have P(A | B) = P(A and B) / P(B).
Given that P(A | B) = 0.35 and P(B) = 0.5, we can solve for P(A and B) as follows:
P(A and B) = P(A | B) * P(B) = 0.35 * 0.5 = 0.175
Since events A and B are independent, we have P(A and B) = P(A) * P(B). Solving for P(A), we get:
P(A) = P(A and B) / P(B) = 0.175 / 0.5 = 0.35
Therefore, P(A) = 0.35.
learn about Bayes' theorem,
https://brainly.com/question/15289416
#SPJ11
ED is a secant. BC is tangent to circle A at point B, where a = 10 and c = 5.
E
A
b
B
D
What is the value of b?
C
According to the figure the value of B is
15How to find the value of BThe value of B is solved using the principles of segments of chords secants and tangents
The principle is such that
10^2 = 5 * (5 + b)
100 = 25 + 5b
gathering like terms
5b = 100 - 25
5b = 75
isolating b
b = 75 / 5
b = 15
Learn more about segments of chords and tangents at
https://brainly.com/question/4470346
#SPJ1
A random sample was drawn from a specific population and divided into three groups, the first group was given the first vitamin, the second was the second vitamin, and the third was the third vitamin, and the increase in weight was recorded for each individual In the three groups, they were as follows: + 3 5 6 8 3 5 4. 9 10 8 7 First Vitamin Second Vitamin Third Vitamin 2 3 1 2 3 O a Required: Knowing which of them leads to weight gain, at a level of significance of 5%, using a SPSS?
To determine which vitamin leads to weight gain, a hypothesis test can be conducted using SPSS with a level of significance of 5%. The group with the significantly higher mean weight gain would indicate which vitamin leads to weight gain.
To determine which vitamin leads to weight gain at a level of significance of 5%, a hypothesis test needs to be conducted. The null hypothesis would be that there is no significant difference in weight gain between the three groups, and the alternative hypothesis would be that there is a significant difference.
To conduct the test in SPSS, the first step would be to input the data for each group and calculate the mean weight gain for each group. Then, a one-way ANOVA test can be conducted to determine if there is a significant difference between the means. The level of significance is set at 5%.
If the p-value is less than 0.05, the null hypothesis can be rejected, indicating that there is a significant difference between the means. Further post-hoc tests can then be conducted to determine which specific groups differ significantly.
In conclusion, to determine which vitamin leads to weight gain, a hypothesis test can be conducted using SPSS with a level of significance of 5%. The group with the significantly higher mean weight gain would indicate which vitamin leads to weight gain.
To determine which vitamin leads to weight gain in the specific population, you can perform an analysis using SPSS at a 5% level of significance. First, input the weight gain data for the three vitamin groups into SPSS. Then, conduct an ANOVA (Analysis of Variance) test to compare the means of the three groups. If the p-value obtained from the test is less than the level of significance (0.05), it indicates a significant difference between the groups. Further post-hoc tests (such as Tukey's HSD) can then be conducted to identify which vitamin group leads to a significant weight gain compared to the others.
Learn more about p-value at: brainly.com/question/30461126
#SPJ11
A rectangular prism has a width of 5 cm and a height of 8 cm and a depth of 2 cm what is the volume of the prism
Answer:
I'm pretty sure the answer is 80.
Step-by-step explanation:
5 × 8 × 2 = 80
In ΔNOP, o = 2.2 cm, n = 8.6 cm and ∠N=134°. Find all possible values of ∠O, to the nearest 10th of a degree.
The values of angle O in the triangle is 13.1 degrees
Finding the values of angle OFrom the question, we have the following parameters that can be used in our computation:
o = 2.2 cm, n = 8.6 cm and ∠N=134
Using the law of sine, we have
o/sin(O) = n/sin(N)
substitute the known values in the above equation, so, we have the following representation
2.2/sin(O) = 8.6/sin(134)
So, we have
sin(O) = 2.2 * sin(134)/8.6
Evaluate and talke the arc sin
O = 13.1 degrees
Read more about law of sine at
https://brainly.com/question/4372174
#SPJ1
Answer:
10.6
Step-by-step explanation:
Trust; also im smart so like yeah.
a new cell phone is introduced into the market. it is predicted that sales will grow logistically. the manufacturer estimates that they can sell a maximum of 100 thousand cell phones.after 28 thousand cell phones have been sold, sales are increasing by 10 thousand phones per month.find the differential equation describing the cell phone sales, where y(t) is the number of cell phones (in thousands) sold after t months.
The differential equation describing the cell phone sales is [tex]\frac{{dy}}{{dt}} = 0.5357 \cdot y(t) \cdot \left(1 - \frac{{y(t)}}{{100}}\right)[/tex].
Based on the given information, the cell phone sales growth is logistic, with a carrying capacity of 100 thousand units. When 28 thousand cell phones have been sold, the rate of sales increase is 10 thousand units per month.
The logistic growth differential equation is given by:
[tex]\frac{dy}{dt} = k \cdot y(t) \cdot \left(1 - \frac{y(t)}{M}\right)[/tex]
where dy/dt is the rate of change in sales, y(t) is the number of cell phones sold after t months, k is the growth rate, and M is the carrying capacity.
In this case, y(t) = 28, dy/dt = 10, and M = 100. To find k, we can plug these values into the equation:
10 = [tex]$k \cdot 28 \cdot \left(1 - \frac{28}{100}\right)$[/tex]
Solving for k:
k ≈ 0.5357
Therefore, the differential equation describing the cell phone sales is:
[tex]\frac{{dy}}{{dt}} = 0.5357 \cdot y(t) \cdot \left(1 - \frac{{y(t)}}{{100}}\right)[/tex]
Learn more about differential equation: https://brainly.com/question/18760518
#SPJ11
a simple random sample of steel canisters has a mean wall thickness of millimeters with a standard deviation of millimeters. is it appropriate to perform a hypothesis test about the population mean?
A simple random sample of steel canisters has been taken, and you have the mean wall thickness and standard deviation in millimeters. To determine if it is appropriate to perform a hypothesis test about the population mean, consider the following factors:
1. Randomness: The sample has been taken using a simple random sampling method, which helps ensure that each canister has an equal chance of being selected. This is a crucial factor for conducting a hypothesis test.
2. Sample size: Although the sample size is not mentioned, a large sample size (usually 30 or more) is preferred for hypothesis testing. The larger the sample size, the more accurate the results of the test will be in representing the entire population.
3. Normality: Hypothesis tests about the population mean often rely on the assumption that the data follows a normal distribution. With a large sample size, the Central Limit Theorem suggests that the sampling distribution of the mean will be approximately normally distributed, even if the population itself is not.
4. Known standard deviation: You have the standard deviation for the sample, which is necessary for conducting the hypothesis test.
Given the information provided, it seems appropriate to perform a hypothesis test about the population mean for the wall thickness of steel canisters, provided the sample size is large enough.
Learn more about deviation here:
https://brainly.com/question/29088233
#SPJ11
bFind the 35th percentiles for the standard normal distribution (Please round your solution at the third decimal place). Click to open: 0 -0.385 -0.865 -0.667 0 - 1.02 0 -1.644
To find the 35th percentile for the standard normal distribution, we need to use a z-table or a calculator. The z-score corresponding to the 35th percentile is -0.385.
Therefore, the answer is -0.385 (rounded to the third decimal place).
The 35th percentile for the standard normal distribution. Here are the steps to find it:
1. Determine the percentile you're looking for, which is the 35th percentile in this case.
2. Since we're working with a standard normal distribution, the mean (μ) is 0 and the standard deviation (σ) is 1.
3. To find the z-score that corresponds to the 35th percentile, you can use a z-table or a calculator with a built-in function for finding percentiles (such as the inverse cumulative distribution function, often labeled as "inv Norm" or "norm").
4. Using a z-table or calculator, look up the z-score that corresponds to the 35th percentile, which is approximately -0.385.
5. Round the z-score to the third decimal place, which is -0.385.
So, the 35th percentile for the standard normal distribution is a z-score of -0.385.
Learn more about percentile:
brainly.com/question/1594020
#SPJ11
T/F: An altitude of a triangle is a line segment through a vertex and perpendicular to (i.e. forming a right angle with) a line containing the opposite side of the triangle.
It is true that an altitude of a triangle is a line segment drawn from a vertex of the triangle perpendicular to the opposite side (or to the line containing the opposite side).
It forms a right angle with the line containing the opposite side. This altitude splits the triangle into two smaller triangles, and it can also be used to find the area of the triangle. The altitude of a triangle is useful in geometry because it can be used to find the area of the triangle. The area of a triangle can be calculated as half the product of the base (the side to which the altitude is drawn) and the length of the altitude. By drawing an altitude from each vertex of the triangle and calculating the area of each smaller triangle, we can find the total area of the larger triangle. Altitudes also have other important properties in geometry, such as being concurrent at a single point called the orthocenter of the triangle, and being related to the sides of the triangle through the Pythagorean theorem.
To know more about triangle,
https://brainly.com/question/28600396
#SPJ11
Help me with this geo question please. (10 points)
Answer:
Step-by-step explanation: Since ABCD is a rhombus, all sides are equal in length, and opposite angles are equal. Let's denote the length of each side as "s". We know that the area of a rhombus can be calculated as (diagonal1 * diagonal2)/2.
Using the given information, we can create the following diagram:
css
Copy code
A
/ \
/ \
/ \
/ \
/ \
P-----------B
\ /
\ /
\ /
\ /
\ /
C
We know that AC and BD are diagonals of the rhombus, and their lengths are in a 4:3 ratio. Let's denote the length of AC as 4x and the length of BD as 3x.
We also know that the length of side PA is equal to the length of side PB, and the length of side PC is equal to the length of side PD. Therefore, we can use the Pythagorean theorem to calculate the value of s:
s^2 = PA^2 + AP^2 = (4x)^2 + (s/2)^2
s^2 = PB^2 + BP^2 = (3x)^2 + (s/2)^2
s^2 = PC^2 + CP^2 = (4x)^2 + (s/2)^2
s^2 = PD^2 + DP^2 = (3x)^2 + (s/2)^2
We can simplify these equations to:
16x^2 + s^2/4 = s^2
9x^2 + s^2/4 = s^2
16x^2 + s^2/4 = s^2
9x^2 + s^2/4 = s^2
Combining like terms, we get:
s^2 = 64x^2/3
s^2 = 36x^2/5
Setting these two expressions equal to each other and solving for x, we get:
64x^2/3 = 36x^2/5
320x^2 = 108x^2
x^2 = 0
This result indicates that our assumption of a rhombus with given side length and diagonal ratio is not valid. Therefore, there is no unique solution for the area of ABCD.
H. :P - 0.65 and H.: p > 0.65 where p = the proportion of students who were quarantined at some point during the Fall Semester of 2020. Identify the correct explanation for a Type II error. Conclude the percent was higher than 65%, but it was not higher. Conclude the percent was higher than 65% and it was higher. Did not conclude the percent was higher than 65%, but it was higher. Did not conclude the percent was higher than 65% and it was not higher.
A Type II error occurs when we fail to reject a null hypothesis that is actually false. In this case, the null hypothesis is that the proportion of students who were quarantined at some point during the Fall Semester of 2020 is equal to or less than 0.65.
The alternative hypothesis is that the proportion is greater than 0.65. If we make a Type II error, we fail to reject the null hypothesis when it is actually false, meaning we do not conclude that the proportion is higher than 0.65 even though it actually is higher.
Therefore, the correct explanation for a Type II error, in this case, we would be: "Did not conclude the percent was higher than 65%, but it was higher."
Learn more about Semester here:
https://brainly.com/question/15399334
#SPJ11
a common data processing approach is to oversample or undersample a class. random oversampling duplicates examples from the minority class in the training dataset; random undersampling deletes examples from the majority class. what effects does oversampling have on the false positive and false negative rates? what about undersampling?
When oversampling a minority class, the positive rate increases, meaning that the model is more likely to correctly identify instances of that class. Under-sampling the majority class may decrease the false positive rate, as the model is less likely to incorrectly classify instances from the majority class as belonging to the minority class.
This may also decrease the positive rate, as there are fewer examples of the minority class to learn from. In general, both oversampling and under-sampling can have trade-offs and it is important to carefully consider the specific dataset and problem at hand before deciding which approach to use.
Oversampling, in which examples from the minority class are duplicated, can have the following effects:
1. False positive rate: Oversampling may lead to an increase in false positives, as the classifier becomes more sensitive to the minority class, causing it to potentially misclassify some majority class instances as minority class instances.
2. False negative rate: On the other hand, oversampling tends to reduce the false negative rate, since the classifier becomes better at identifying the minority class instances.
Undersampling, in which examples from the majority class are deleted, can have these effects:
1. False positive rate: Undersampling may lead to a decrease in false positives, as the classifier is less likely to misclassify majority class instances as minority class instances due to the reduced majority class representation.
2. False negative rate: However, undersampling can cause an increase in false negatives, as the classifier may not be as sensitive to the minority class instances and may misclassify them as majority class instances.
In summary, oversampling generally increases false positives and reduces false negatives, while undersampling tends to decrease false positives and increase false negatives. When choosing between these methods, it's important to consider the specific problem and the desired balance between false positive and false negative rates.
Learn more about Over-sampling:
brainly.com/question/29490427
#SPJ11
There are 10 brown, 10 black, 10 green, and 10 gold marbles in bag. A student pulled a marble, recorded the color, and placed the marble back in the bag. The table below lists the frequency of each color pulled during the experiment after 40 trials.
Outcome Frequency
Brown 13
Black 9
Green 7
Gold 11
Compare the theoretical probability and experimental probability of pulling a gold marble from the bag.
The theoretical probability, P(gold), is 25%, and the experimental probability is 27.5%.
The theoretical probability, P(gold), is 50%, and the experimental probability is 11.5%.
The theoretical probability, P(gold), is 25%, and the experimental probability is 25%.
The theoretical probability, P(gold), is 50%, and the experimental probability is 13.0%.
The correct option is the first one:
The theoretical probability, P(gold), is 25%, and the experimental probability is 27.5%.
How to find the probabilities?The experimental probability is equal to the quotient between the number of times that a gold block was taken and the total number of trials, so it is:
E = 11/40 = 0.275
Multiply this by 100% to get the percentage:
0.275*100% = 27.5%
For the theoretical probability, take the quotient between the number of gold blocks and the total number:
T = 10/40 = 0.25
And multiply it by 100%
100%*0.25 = 25%
Then the correct option is The theoretical probability, P(gold), is 25%, and the experimental probability is 27.5%.
Learn more about probability at:
https://brainly.com/question/25870256
#SPJ1
A function of the form f(x) = ab* is modified so that the b value remains the same but the a value is increased by 2.
How do the domain and range of the new function compare to the domain and range of the original function?
Check all that apply.
O The range stays the same.
O The range becomes y > 2.
O The domain stays the same.
O The domain becomes x > 2.
O
The range becomes y ≥ 2.
O The domain becomes x ≥ 2.
The correct statement regarding the domain and the range of the exponential function is given as follows:
The range stays the same.The domain stays the same.How to define an exponential function?An exponential function has the definition presented as follows:
[tex]y = ab^x[/tex]
In which the parameters are given as follows:
a is the value of y when x = 0.b is the rate of change.The function is in the standard format, meaning that the horizontal asymptote is y = 0, and thus the multiplication of a by zero does not change the horizontal asymptote, and the range stays the same.
The domain also remains the same, as an exponential function is defined for all real values.
More can be learned about exponential functions at brainly.com/question/2456547
#SPJ1
Suppose you ask a friend to randomly choose an integer between 1 and 10, inclusive.
What is the probability that the number will be more than 2 or odd? (Enter your probability as a fraction.)
The probability is 9/10.
How to solve for the probabilitySample Space: {1, 2, 3, 4, 5, 6, 7, 8, 9, 10}
Successful Outcomes:
Numbers greater than 2: {3, 4, 5, 6, 7, 8, 9, 10}
Odd numbers: {1, 3, 5, 7, 9}
However, the numbers 3, 5, 7, and 9 are included in both the "greater than 2" and "odd numbers" sets. So, we only count them once in our combined set of successful outcomes.
Combined Successful Outcomes: {1, 3, 4, 5, 6, 7, 8, 9, 10}
There are a total of 9 successful outcomes out of the 10 possible outcomes in the sample space.
The probability that the number will be more than 2 or odd is:
Probability = (Number of successful outcomes) / (Total number of outcomes) = 9 / 10
So, the probability is 9/10.
Read more on probability here:https://brainly.com/question/24756209
#SPJ1
0.6 divided by 1.80 please i need help
Answer: 0.333333333->
Step-by-step explanation:
It goes on forever
Suppose a simple random sample of size n=81 is obtained from a population that is skewed right with μ=82 and σ=27.(a) Describe the sampling distribution of x.(b) What is P x>87.4?(c) What is P x≤75.1?(d) What is P 79.3
(a) The sampling distribution of x is approximately normal with mean 82 and standard deviation 3. (b) P(x > 87.4) = 0.0708. (c) P(x ≤ 75.1) = 0.0990. (d) P(79.3 < x < 84.7) = 0.1675.
(a) The sampling distribution of x is approximately normal due to the central limit theorem, with a mean of μ = 82 and a standard deviation of σ/sqrt(n) = 27/sqrt(81) = 3.
(b) To find P(x > 87.4), we first standardize the value using the formula z = (x - μ) / (σ / sqrt(n)) = (87.4 - 82) / (27 / sqrt(81)) = 1.48. We then find the probability using a standard normal distribution table or calculator, which is approximately 0.0708 or 7.08%.
(c) To find P(x ≤ 75.1), we again standardize the value using the formula z = (x - μ) / (σ / sqrt(n)) = (75.1 - 82) / (27 / sqrt(81)) = -1.29. We then find the probability using a standard normal distribution table or calculator, which is approximately 0.0990 or 9.90%.
(d) To find P(79.3), we first standardize the value using the formula z = (x - μ) / (σ / sqrt(n)) = (79.3 - 82) / (27 / sqrt(81)) = -0.96. We then find the probability using a standard normal distribution table or calculator, which is approximately 0.1675 or 16.75%.
Learn more about standard normal distribution here:
https://brainly.com/question/31379967
#SPJ11
In Minnesota the sales tax rate is 6.875%
B. If the price of a tablet computer sold in Minnesota is $513 including sales tax, what was the list price of the computer?
The calculated list price of the computer is $480
What was the list price of the computer?From the question, we have the following parameters that can be used in our computation:
Total price = $513
Sales tax = 6.875%
using the above as a guide, we have the following:
Total price = List price * (1 + tax)
Substitute the known values in the above equation, so, we have the following representation
List price * (1 + 6.875%) = 513
Evaluate
List price = 480
Hence, the List price = 480
Read more about sales tax at
https://brainly.com/question/9437038
#SPJ1
Vic rolls a ball across the floor. The distance traveled is shown in the table.
Time
(seconds)
Distance
(feet)
0
0
b. Interval between 0.5 and 1 second:
0.5
2. What is the average speed for each of the intervals?
a. Interval between 0 and 0.5 seconds:
c. Interval between 1 and 1.5 seconds:
6
d. Interval between 1.5 and 2 seconds:
1
1. Describe the function that represents the distance the ball travels with respect to time.
11
1.5
3. Is the ball rolling across the floor at a constant speed? Explain.
15
2
18
The description of the motion of the ball across the floor after being rolled by Vic, based on the distances shown on the table and the average speed are as follows;
1. The function is a quadratic function
2. a. 12 ft/s
b. 10 ft/s
c. 8 ft/s
d. 6 ft/s
What is an average speed?Average speed is the ratio of the distance traveled in a period to the time it takes to travel during the period.
The values in the table in the indicates that we get;
The first differences are;
6 - 0 = 6
11 - 6 = 5
15 - 11 = 4
18 - 15 = 3
The second difference are;
5 - 6 = -1
4 - 5 = -1
3 - 4 = -1
Whereby the first difference are not constant and the second difference, which is the differences between the consecutive first difference are constant, we get;
The function that describe the distance the ball travels with respect to time is a quadratic function2. a. The average speed between 0 and 0.5 seconds = (6 - 0)/(0.5 - 0) = 12
The average speed between 0 and 0.5 seconds is 12 feet per second
b. The interval between 0.5 and 1 indicates;
Average speed = (11 - 6)/(1 - 0.5) = 10
The average speed between 0.5 and 1 second is 10 feet per second
c. The interval between 1 and 1.5 seconds indicates;
Average speed = (15 - 11)/(1.5 - 1) = 8
The average speed between 1 and 1.5 second is 8 feet per second
d. The interval between 1.5 and 2 seconds indicates;
Average speed = (18 - 15)/(2 - 1.5) = 6
The average speed between 1.5 and 2 second is 6 feet per second
Learn more on the average speed of an object here: https://brainly.com/question/24824545
#SPJ1
Suppose that you had consumer group wanted to test to see if weight of participants in a weight loss program changed (up or down). They computed a 95% confidence interval of the result (-4.977, -2.177). What do we know about the p-value for the test?
It would be 0.05.
Can't be determined.
It would be greater than 0.05.
It would be less than 0.05.
We cannot determine the p-value from the given information. The confidence interval only tells us the range of values that we are 95% confident contains the true population mean weight change.
The p-value would need to be calculated from the sample data and test statistics to determine the statistical significance of the weight loss program's effectiveness.
A consumer group testing the weight change of participants in a weight loss program. They computed a 95% confidence interval of the result (-4.977, -2.177) and you want to know what we can infer about the p-value for the test.
Since the 95% confidence interval does not include 0 (meaning that the weight change is significantly different from no change), we can conclude that the p-value for this test would be less than 0.05.
The p-value for the test would be less than 0.05.
Visit here to learn more about statistics:
brainly.com/question/31538429
#SPJ11
Let Ul , U2 , U3 , U4 , U5 be independent, each with uniform distribution on (0,1). Let R
be the distance between the minimum and the maximum of the Ui's. Find
a) E(R);
b) the joint density of the minimum and maximum of the U;'s;
c) P(R> 0.5)
Please do b) and c) and explain in details.
b) To find the joint density of the minimum and maximum of the U_i's, we can use the following approach:
Let M = min(U_1, U_2, U_3, U_4, U_5) and let X = max(U_1, U_2, U_3, U_4, U_5). Then we have:
P(M > m, X < x) = P(U_1 > m, U_2 > m, U_3 > m, U_4 > m, U_5 > m, U_1 < x, U_2 < x, U_3 < x, U_4 < x, U_5 < x)
Since the U_i's are independent and uniformly distributed on (0,1), we have:
P(U_i > m) = 1 - m, for 0 < m < 1
P(U_i < x) = x, for 0 < x < 1
Substituting these expressions, we get:
P(M > m, X < x) = (1 - m)^5 * x^5
Therefore, the joint density of M and X is:
f(M,X) = d^2/dm dx (1-m)^5 * x^5 = 30(1-m)^4 * x^4, for 0 < m < x < 1.
c) To find P(R > 0.5), we need to find the probability that the distance between the minimum and maximum of the U_i's is greater than 0.5. We can use the following approach:
P(R > 0.5) = 1 - P(R <= 0.5)
Now, R <= 0.5 if and only if the difference between the maximum and minimum of the U_i's is less than or equal to 0.5. Therefore, we have:
P(R <= 0.5) = P(X - M <= 0.5)
To find this probability, we can integrate the joint density of M and X over the region where X - M <= 0.5:
P(R <= 0.5) = ∫∫_{x-m<=0.5} f(M,X) dm dx
The region of integration is the triangle with vertices (0,0), (0.5,0.5), and (1,1). We can split this triangle into two regions: the rectangle with vertices (0,0), (0.5,0), (0.5,0.5), and (0,0.5), and the triangle with vertices (0.5,0.5), (1,0.5), and (1,1). Therefore, we have:
P(R <= 0.5) = ∫_{0}^{0.5} ∫_{0}^{m+0.5} 30(1-m)^4 * x^4 dx dm + ∫_{0.5}^{1} ∫_{x-0.5}^{x} 30(1-m)^4 * x^4 dm dx
Evaluating these integrals, we get:
P(R <= 0.5) ≈ 0.5798
Therefore,
P(R > 0.5) = 1 - P(R <= 0.5) ≈ 0.4202.
Visit here to learn more about joint density brainly.com/question/29848433
#SPJ11
In seventh grade, Emile grew
3 7/10cm, and in eighth grade he grew 3 4/5cm. How much did his height increase during these two years?
The answer should be written as a proper mixed number and should be simplified, if possible
The change in Emile's height based on old and new height is 0.9 cm or 9/10 cm.
The change in Emile's height can be calculated using the subtraction. The formula to be used for it is -
Change in height = New height - Old height
Firstly changing the height to fraction.
Old height = [tex]3 \frac{7}{10} [/tex]
Old height = ((10×3)+7)/10
Old height = 37/10 cm
New height = [tex]4 \frac{3}{5} [/tex]
New height = ((5×4)+3)/5
New height = 23/5 cm
Keep the values in formula to find the value of change in height
Change in height = 23/5 - 37/10
Change = 23×2 - 37/10
Change = 46 - 37/10
Change = 0.9 cm
Hence, the change in height is 0.9 cm.
Learn more about fraction -
https://brainly.com/question/17220365
#SPJ4
The complete question is -
In seventh grade, Emile grew
3 7/10cm, and in eighth grade, he grew 4 3/5cm. How much did his height increase during these two years?
The answer should be written as a proper mixed number and should be simplified, if possible
During these two years, Emile's height increased by 0.9 cm or 9/10 cm.
We will calculate the change in Emile's height using Subtraction. The formula that we will use is:
Change in height = Eighth-grade height - Seventh-grade height
Firstly, we will convert the height to a fraction.
Seventh-grade height = ((10×3)+7)/10
Seventh-grade height = 37/10 cm
Now,
Eighth-grade height = ((5×4)+3)/5
Eighth-grade height = 23/5 cm
Now, find the change in height by substituting the values in the formula.
Change in height = Eighth-grade height - seventh-grade height
= 23/5 - 37/10
Change in height = 23×2 - 37/10
Change = 46 - 37/10
Change = 0.9 cm
Therefore, the increase in height during these two years is 0.9 cm or 9/10 cm.
To learn more about fractions -
https://brainly.com/question/78672
#SPJ4
(CO7) An advocacy group claims that the mean braking distance of a certain type of tire is 75 feet when the car is going 40 miles per hour. In a test of 45 of these tires, the braking distance has a mean of 78 and a standard deviation of 5.9 feet. Find the standardized test statistic and the corresponding p-value.
z-test statistic = -3.41, p-value = 0.0003
z-test statistic = 3.41, p-value = 0.0003
z-test statistic = 3.41, p-value = 0.0006
z-test statistic = -3.41, p-value = 0.0003
The correct answer is: z-test statistic = 3.41, p-value = 0.0003. To find the standardized test statistic (z-test statistic) and corresponding p-value, we will use the following formula: z = (sample mean - hypothesized mean) / (standard deviation / sqrt(sample size))
To find the standardized test statistic, we use the formula:
z = (sample mean - hypothesized mean) / (standard deviation / sqrt(sample size))
Plugging in the values given, we get:
z = (78 - 75) / (5.9 / sqrt(45))
z = 3.41
To find the corresponding p-value, we can use a standard normal distribution table or calculator. The p-value represents the probability of getting a z-score as extreme or more extreme than the one we calculated. Since our z-score is positive, we are interested in the area to the right of it on the standard normal distribution. This gives us a p-value of 0.0003.
Therefore, the correct answer is: z-test statistic = 3.41, p-value = 0.0003.
To find the standardized test statistic (z-test statistic) and corresponding p-value, we will use the following formula:
z = (sample mean - hypothesized mean) / (standard deviation / sqrt(sample size))
Plugging in the given values:
z = (78 - 75) / (5.9 / sqrt(45))
z = 3 / (5.9 / 6.708)
z = 3 / 0.880
z ≈ 3.41
Using a standard normal distribution table or a calculator, we find the area to the right of the z-score (since we're testing if the braking distance is greater than the hypothesized mean):
p-value ≈ 0.0003
Therefore, the correct answer is:
z-test statistic = 3.41, p-value = 0.0003
Visit here to learn more about standard deviation brainly.com/question/23907081
#SPJ11