Answer:
The angular acceleration is 2 rad/s².
Explanation:
Given that,
Rotational inertia = 1.0 kg m²
Torque = 2.0 Nm
We need to calculate the angular acceleration
Using formula of torque
[tex]\tau=I\alpha[/tex]
[tex]\alpha=\dfrac{\tau}{I}[/tex]
Where, I = moment of inertia
[tex]\tau[/tex] = torque
Put the value into the formula
[tex]\alpha=\dfrac{2.0}{1.0}[/tex]
[tex]\alpha=2\ rad/s^2[/tex]
Hence, The angular acceleration is 2 rad/s².
A daring stunt woman sitting on a tree limb
wishes to drop vertically onto a horse gallop-
ing under the tree. The constant speed of the
horse is 6.8 m/s, and the woman is initially
1.91 m above the level of the saddle.
How long is she in the air? The acceleration
of gravity is 9.8 m/s.
Answer in units of s.
Answer:
she is in the air for approximately 0.62 seconds
Explanation:
We want to find the time for a free fall under the acceleration of gravity, covering a distance of 1.91 m, and considering that the woman doesn't impart initial velocity in the vertical direction. So we use the kinematic equation:
[tex]d=v_i\,t+ \frac{g}{2} \,t^21.91 = 0 +4.9\, t^2\\t^2=1.91/4.9\\t=\sqrt{1.91/4.9} \\t\approx 0.624\,\,sec[/tex]
Then she is in the air for approximately 0.62 seconds
a jogger travels at 4 m/s for 100 s what is the distance covered
400m
Explanation:
given,
v= 4m/s
t= 100s
d= ?
since, v = d / t
therefore, d = v * t (velocity multiplied by time)
=> d = 4 * 100
= 400m.
Two equal forces act on two different objects, one of which has a mass ten times as large as the other. The larger object will have _________ acceleration that the less massive object.
Answer:
The larger object will have smaller acceleration that the less massive object.
Explanation:
Generally force is mathematically represented as
[tex]F = ma[/tex]
=> [tex]m = \frac{F}{a }[/tex]
at constant force we have
[tex]m \ \alpha \ \frac{1}{a}[/tex]
So if m is increasing a will be decreasing which means the object with the larger mass will have less acceleration
To begin your activity, open this Tracker experiment: Car Round Trip. Click play to watch the video. The other video controls allow you to rewind the video or step forward or backward one frame at a time.
Answer:
The car appears to have a constant, positive acceleration for most of the video clip.
The public is not yet able to purchase cars powered by hydrogen fuel cells because engineers have to determin
how the cars perform based on which scenario?
on racetracks
Answer:
The options are
A.on racetracks
B.in real-world conditions
C.in flooded environments
D.on closed courses
The answer is B. In real world conditions
The public is not yet able to purchase cars powered by hydrogen fuel cells because engineers have to determin
how the cars perform based on real world conditions.
This will ensure they encounter the real and first hand experiences about the challenges and also the advantages associated with using this type of fuel.
A student must design an experiment to determine the relationship between the mass of an object and the resulting acceleration when the object is under the influence of a net force. Which of the following experiments should the student conduct in order to determine the relationship between all three quantities?
Answer choices:
A) Drop objects of different masses from a known height above the ground for multiple trials such that they reach their respective terminal speeds. Use a stopwatch to measure the time it takes each object to reach the ground, and record the mass of each object by using a mass scale.
B) Slide objects of different masses across the same rough surface so that each object travels at a constant speed while under the influence of the force of kinetic friction. Then measure the force required to keep each object at a constant speed by using a force sensor, and record the mass of each object by using a mass scale. Perform this experiment multiple times with objects of different masses.
C) Place an object on a rough surface so that the object is at rest. Use a force sensor to exert a force on the object until just after the object overcomes the force of static friction. Record this force. Repeat the experiment for objects of different masses.
D) Slide an object of known mass across a rough surface, using a constant applied force that can be measured by a force sensor. Place a motion detector behind the object so that its speed can be measured as it slides across the surface. Repeat the experiment for different applied forces.
Answer:
D) Slide an object of known mass across a rough surface, using a constant applied force that can be measured by a force sensor. Place a motion detector behind the object so that its speed can be measured as it slides across the surface. Repeat the experiment for different applied forces.
Explanation:
"The motion detector will provide information about the object’s speed as a function of time as it slides as a result of the applied force. The information about the object’s speed as a function of time can be used to determine the acceleration of the object. The force sensor measures the applied force exerted on the object, and the mass of the object is known. Therefore, this experiment can be used to determine how an object’s mass is related to the net force exerted on the object and the acceleration of the object."
It cannot be A because we need an acceleration will be determined by gravity.
It cannot be B because the term constant speed means that there is no net force, which is required by the initial question.
It cannot be C because the experiment is good for determining the coefficient of friction but not for determining how the mass relates to the acceleration.
It must be D because the object is moving and we have a motion detector, we can graph the acceleration vs time graph. So D allows you to have a lot of the different acceleration values which helps with determining the relationship between acceleration and the mass.
How much voltage (in terms of the power source voltage bV) will the capacitor have when it has started at zero volts potential difference, it is connected to the power supply and resistor and onehalf the characteristic time has passed (i.e. t= T(tau)/2)?
Answer:
The voltage is [tex]V = 0.993V_b[/tex]
Explanation:
From the question we are told that
The time that has passed is [tex]t = \frac{\tau}{2}[/tex]
Here [tex]\tau[/tex] is know as the time constant
The voltage of the power source is [tex]V_b[/tex]
Generally the voltage equation for charging a capacitor is mathematically represented as
[tex]V = V_b [1 - e^{- \frac{t}{\tau} }][/tex]
=> [tex]V = V_b [1 - e^{- \frac{\frac{\tau}{2}}{\tau} }][/tex]
=> [tex]V = V_b [1 - e^{- \frac{\tau}{2\tau} }][/tex]
=> [tex]V = V_b [1 - e^{- \frac{1}{2} }][/tex]
=> [tex]V = 0.993V_b[/tex]
g A hydraulic press has a safety feature which consists of a hydraulic cylinder with a piston at one end and a safety valve at the other. The cylinder has a radius of 0.0200 m and the safety valve is simply a 0.00750-m radius circular opening at one end, sealed with a disk. The disk is held in place by a spring with a spring constant of 950 N/m that has been compressed 0.0085 m from its natural length. Determine the magnitude of the minimum force that must be exerted on the piston in order to open the safety valve.
Answer:
58.32 N
Explanation:
Area of a circle = [tex]\pi[/tex][tex]r^{2}[/tex]
where r is the radius of the circle.
The cylinder has a radius of 0.02 m, its area is;
[tex]A_{1}[/tex] = [tex]\pi[/tex][tex]r^{2}[/tex]
= [tex]\frac{22}{7}[/tex] x [tex](0.02)^{2}[/tex]
= [tex]\frac{22}{7}[/tex] x 0.0004
= 1.2571 x [tex]10^{-3}[/tex]
Area of the cylinder is 0.0013 [tex]m^{2}[/tex].
The safety valve has a radius of 0.0075 m, its area is;
[tex]A_{2}[/tex] = [tex]\pi[/tex][tex]r^{2}[/tex]
= [tex]\frac{22}{7}[/tex] x [tex](0.0075)^{2}[/tex]
= [tex]\frac{22}{7}[/tex] x 5.625 x [tex]10^{-5}[/tex]
= 1.7679 x [tex]10^{-4}[/tex]
Area of the valve is 0.00018 [tex]m^{2}[/tex].
From Hooke's law, the force on the safety valve can be determined by;
F = ke
[tex]F_{2}[/tex] = 950 x 0.0085
= 8.075 N
Minimum force, [tex]F_{1}[/tex], required can be determined by;
[tex]\frac{F_{1} }{A_{1} }[/tex] = [tex]\frac{F_{2} }{A_{2} }[/tex]
[tex]\frac{F_{1} }{0.0013}[/tex] = [tex]\frac{8.075}{0.00018}[/tex]
[tex]F_{1}[/tex] = [tex]\frac{0.0013 *8.075}{0.00018}[/tex]
= 58.32
The minimum force that must be exerted on the piston is 58.32 N.
PLEASE HELP
A sharpshooter fires a 0.22 caliber rifle horizontally at 100 m/s at a target 75m away. How far does the
bullet drop by the time it reaches the target?
This question involves the concept of semi-projectile motion. It can be solved using the equations of motion in the horizontal and the vertical motion.
The bullet drops "2.76 m" by the time it reaches the target.
First, we will analyze the horizontal motion. We assume no air resistance, so the horizontal motion will be uniform. Hence, using the equation of uniform motion here to find the total time to reach the target:
[tex]s = vt\\\\t = \frac{s}{v}[/tex]
where,
s = distance = 75 m
v = velocity = 100 m/s
t = time = ?
Therefore,
[tex]t = \frac{75\ m}{100\ m/s}[/tex]
t = 0.75 s
Now, we will analyze the vertical motion of the bullet. We will use the second equation of motion in the vertical direction to find the height dropped by the bullet.
[tex]h = v_it+\frac{1}{2}gt^2[/tex]
where,
h = height dropped = ?
vi = initial vertical speed = 0 m/s
t = time interval = 0.75 s
g = acceleration due to gravity = 9.81 m/s²
therefore,
[tex]h = (0\ m/s)(0.75\ s)+\frac{1}{2}(9.81\ m/s^2)(0.75\ s)^2[/tex]
h = 2.76 m
Learn more about equations of motion here:
brainly.com/question/20594939?referrer=searchResults
The attached picture shows the equations of motion in the horizontal and vertical directions.
500m=?m² va rooooooog
Answer:
250000 [m²]
Explanation:
A unit analysis has to be performed, where the unit of length is the meter. And the unit for the area is the square meter (m²)
L = 500 [m]
Therefore if we want to convert this length to meters we must square the length.
A = 500² = 500*500 = 250000 [m²]
A force of 40 N is applied tangentially to the rim of a solid disk of radius 0.10 m. The disk rotates about an axis through its center and perpendicular to its face with a constant angular acceleration of 145 rad/s2. Determine the mass of the disk.
Answer:
m = 2,759 kg
Explanation:
For this exercise we use the torque relationship
τ = I α
the moment is
τ= F r sin θ
since the force is tangential to the ring, the angle is 90º sin 90 = 1
τ = F r
the moment of inertia of a ring is given by
I = m r²
let's substitute
F r = m r²α
m = F / r α
let's calculate
m = 40 / (0.10 145)
m = 2,759 kg
A student rides a bicycle 2400 meters in four minutes to get to school. What is the student's speed?
Answer:
10 mls2
Explanation:
speed =distance /time
plzzz help its for my civics class what answer is it????????????
Answer:
the correct answer is The English Bill of Rights
Explanation:
This is the answer because i have taken the test.
If a car is traveling at an average speed of 70 kilometers per hour how long does it take the car to travel 14 kilometers
Answer:
Explanation:
O.20 hour A
If a car is traveling at an average speed of 70 kilometers per hour, 0.2 hours it takes the car to travel 14 kilometers.
What is average speed?By multiplying the distance that an item travels in one unit by the amount of time it takes to go that distance, one may determine the speed of the object. The speed of the item on this voyage, denoted by the letter "s," is equal to s = D/T if "D" is indeed the distance traveled in certain time "T."
Understanding average speed will help you better comprehend the pace of a travel. On a travel, the pace could occasionally change. Knowing the average speed then becomes crucial to getting an idea of how quickly the route will be finished.
Distance covered = average speed × Time travelled
14=70× Time travelled
Time travelled = 0.2 hours
Therefore, 0.2 hours it takes the car to travel 14 kilometers.
To know more about average speed, here:
https://brainly.com/question/10449029
#SPJ6
During a thunderstorm the electric field at a certain point in the earth's atmosphere is 1.07 105 N/C, directed upward. Find the acceleration of a small piece of ice of mass 1.08 10-4 g, carrying a charge of 1.05 10-11 C.
Answer:
The acceleration of a small piece of ice is 10.40 m/s².
Explanation:
The electric force is given by:
[tex]F = Eq[/tex]
Where:
E is the electric field = 1.07x10⁵ N/C
q is the charge = 1.05x10⁻¹¹ C
The electric force is equal to Newton's second law:
[tex] Eq = ma [/tex]
Where:
m is the mass = 1.08x10⁻⁴ g = 1.08x10⁻⁷ kg
a is the acceleration
Hence, the acceleration is:
[tex] a = \frac{Eq}{m} = \frac{1.07 \cdot 10^{5} N/C*1.05 \cdot 10^{-11} C}{1.08 \cdot 10^{-7} kg} = 10.40 m/s^{2} [/tex]
Therefore, the acceleration of a small piece of ice is 10.40 m/s².
I hope it helps you!
the diagram shows a contour map. letter a through k are reference points on the map. which points are located at the same elevation above sea level?
Answer:
K and I
Explanation:
Contour maps use lines that represent spaces in a map that have the same elevation, this means that all the lines should be continuous and closed, in this case, we are not able to see the full extent of most of the lines, but since the points are located in different lines we can assume that they are at different heights, so since only point K and point I are on the same line, we know that these two points are at the same height.
4. A teacher throws the stapler at her students 23 m in 1.2 seconds. What speed must the teacher throw the
stapler and what will be the staplers highest point during its flight?
dy = - 42gt2
dx = Vyt
Answer:
dy
Explanation:
My guess of guts.
okay bye
An electric bulb rated 100 W, 100 V has to be
operated aross 141.4 V, 50 Hz A.C. supply. The
capacitance of the capacitor which has to be
connected in series with bulb so that bulb will
glow with full intensity is [NCERT Pg. 251]
Answer:
The capacitance of the capacitor is 31.84 μF.
Explanation:
Given;
power rating of the bulb, P = 100 W
voltage rating of the bulb, Vr = 100 V
operating voltage of the bulb, V= 141.4 V
frequency of the AC = 50 Hz
P = IV = 100 W
V = 100 V
I =
Ic = 1 A
The voltage across the capacitor is given by;
[tex]V_c = \sqrt{V^2 - V_R^2} \\\\V_c = \sqrt{141.4^2 - 100^2} \\\\V_c =99.97 \ V[/tex]
[tex]V_c = I_cX_c\\\\V_c = I_C* \frac{1}{2\pi fC}\\\\ 99.97 = 1 * \frac{1}{2\pi *50 *C}\\\\ C=\frac{1}{2\pi *50*99.97}\\\\ C = 31.84*10^{-6} \ F\\\\C = 31.84 \ \mu F[/tex]
Therefore, the capacitance of the capacitor is 31.84 μF.
How will the motion of an object that is moving to the right change, if it is pushed in the opposite direction with a greater force?
Оооо
The object will move at a constant speed in the same direction for a while and then slow down and stop.
The object will slow down for a while and then move at a slower constant speed in the same direction.
The object will slow down and then begin to move faster and faster in the opposite direction.
0 The object will speed up and then begin to move at a slower speed in the opposite direction.
You have a friend who reports that he falls asleep easily around 11 PM but then awakens for about an hour most nights around two or 3 AM he seems near exhausted what would be the traditional exclamation for his problem how much the information contribute by anthropologists change this view? Give the anthropological view what recommendations would you make your friend?
It is highly recommended that this friend who is suffering from insomnia visits the doctor and eat foods rich in serotonin.
What is insomnia?Insomnia is a medical condition in which an individual is unable to sleep or has short periods of interrupted sleep.
A friend who falls asleep easily and then has difficulty going to sleep is probably suffering from insomnia.
It is recommended that this friend who is suffering from insomnia visits the doctor and eat foods rich in serotonin.
Learn more about insomnia at: https://brainly.com/question/816019
. Suppose you walk 18.0 m straight west and then 25.0 m straight north. How far are you from your starting point? What is your displacement vector? What is the direction of your displacement? Assume the +x-axis is to the east.
Answer:
Explanation:
The total distance is how far you walk from the starting point.
Distance through west = 18.0m
Distance through north = 25.0m
Total distance covered = 18.0+25.0m
Total distance covered = 43.0m
This means that I am 43.0m from the starting point
Displacement is the distance covered in a specified direction. The displacement will be gotten using the Pythagoras theorem as shown:
[tex]d^2 = 25^2 + 18^2\\d^2 = 625+324\\d^2 = 949\\d = \sqrt{949}\\ d = 30.81m[/tex]
The direction of your displacement is 30.81m
Direction is gotten according to the formula;
[tex]\theta = tan ^{-1}{\frac{y}{x} }\\\theta = tan ^{-1}{\frac{25}{-18} }\\\theta = tan ^{-1}-1.3889}\\\theta = -60.27^0\\\theta = 180-60.27\\\theta = 119.7^0[/tex]
Note that the direction to the west is negative, that is why the x is -18.0m
The distance from the starting point is 43 m, the displacement vector is 30.81 m and the direction of the displacement is 119.7 degrees.
Given-
Distance travel through the west is 18 m.
Distance travel through the north is 25 m.
Distance from starting point-
To know the total distance, add both the covered distance. Thus total distance x is,
[tex]x=18+25[/tex]
[tex]x=43[/tex]
Hence, the distance from the starting point is 43 m.
The displacement vector-
Displacement is calculated as the shortest distance between starting and final point. This shortest distance can be calculated using the Pythagoras theorem which states that in a right-angled triangle, the square of the hypotenuse [tex]d[/tex] is equal to the sum of the squares of the other two sides. Therefore,
[tex]d^2=18^2+25^2[/tex]
[tex]d^2=324+625[/tex]
[tex]d^2=949[/tex]
[tex]d=\sqrt{949}[/tex]
[tex]d=30.81[/tex]
The displacement vector is 30.81 m.
The Direction of displacement-The direction of displacement [tex]\theta[/tex] with these two sides can be calculated with the formula,
[tex]\theta=tan^{-1}\dfrac{25}{-18}[/tex]
Here due to the west direction(opposite side), the sign is taken negatively.
[tex]\theta=tan^{-1}(-1.389)[/tex]
[tex]\theta=-60.27^o[/tex]
For the other quarter,
[tex]\theta=180-60.27=119.7^o[/tex]
Hence, the distance from the starting point is 43 m, the displacement vector is 30.81 m and the direction of the displacement is 119.7 degrees.
For more about the displacement, follow the link below-
https://brainly.com/question/10919017
A shopper pushes a cart 40.0 m south down one aisle and then turns 90.0° and moves 15.0 m. He then makes another 90.0° turn and moves 20.0 m. Find the shopper’s total displacement.
Answer:
25.0mExplanation:
Find the diagram attached for the schematic diagram of motion of the cart. The displacement of the cart is the length AD.
To get the length AD, we will apply Pythagoras theorem on ΔAED.
According to the theorem:
AD² = AE²+ED²
AD² = 20²+15²
AD² = 400+225
AD² = 625
AD = √625
AD = 25.0m
Hence the shopper’s total displacement is 25.0m
The emf of the battery is 1.5 V. In Nichrome there are 9 × 1028 mobile electrons per m3, and the mobility of mobile electrons is 7 × 10−5 (m/s)/(N/C). Each thick wire has length 29 cm = 0.29 m and cross-sectional area 9 × 10−8 m2. The thin wire has length 6 cm = 0.06 m and cross-sectional area 1.3 × 10−8 m2. (The total length of the three wires is 64 cm.) In the steady state, calculate the number of electrons entering the thin wire every second. Do not make any approximations, and do not use Ohm's law or series-resistance equations.
Answer:
The number of electrons entering the thin wire every second is 1.75 x 10⁻³ mobile electrons / second
Explanation:
Given;
emf of the battery, V = 1.5 V
electron density, = 9 × 10²⁸ mobile electrons per m³
mobility of electron, u = 7 × 10⁻⁵ (m/s)/(N/C)
length of thin wire, L = 6 cm = 0.06 m
cross sectional area of the thin wire, A = 1.3 x 10⁻⁸ m²
The magnitude of the electric field in the thin wire is given by;
E = V/L
E = (1.5) / (0.06)
E = 25 N/C
the number of electrons entering the thin wire every second is given by;
[tex]e/s = mobility \ x \ Electric \ field\\\\number \ of \ electrons \ per \ second =\frac{7*10^{-5} (m/s)}{N/C} *25 (N/C)\\\\number \ of \ electrons \ per \ second = 1.75*10^{-3} \ m/s[/tex]
Therefore, the number of electrons entering the thin wire every second is 1.75 x 10⁻³ mobile electrons / second
The number of electrons entering the thin wire every second is 1.75 x 10⁻³ mobile electrons / second
Calculation of the number of electrons:Since
emf of the battery, V = 1.5 V
electron density, = 9 × 10²⁸ mobile electrons per m³
mobility of electron, u = 7 × 10⁻⁵ (m/s)/(N/C)
length of thin wire, L = 6 cm = 0.06 m
cross sectional area of the thin wire, A = 1.3 x 10⁻⁸ m²
So here the magnitude should be
E = V/L
E = (1.5) / (0.06)
E = 25 N/C
Now the number of electrons should be
= 7 × 10⁻⁵ *25
= 1.75 x 10⁻³ mobile
hence, The number of electrons entering the thin wire every second is 1.75 x 10⁻³ mobile electrons / second
Learn more about electron here: https://brainly.com/question/24701476
Water enters a 2 m3 tank at a rate of 6 kg/s and is withdrawn at a rate of 2 kg/s. The tank is initially half full. What type of process is this?
Answer:
This process is semicontinuous.
Explanation:
Given that,
Volume = 2 m³
Enter flow rate = 6 kg/s
Exit flow rate = 2 kg/s
The tank is initially half full.
We need to find what type of process
Using given data,
This process is not continuous because given enter and exit flow rate is not equal.
This process is semicontinuous and the water level in the tank does not reach a constant level.
Hence, This process is semicontinuous.
You release a ball from rest at the top of a ramp. 6 s later it is moving at 4.0
m/s. What is the acceleration? (in meters per second squared) *
Your answer
[tex]a = \frac{vf - vi}{t} [/tex]
here initial velocity vi=0 as ball release from rest
the final velocity is vf=4.0
time is t=6
so putting all these values in above equation
[tex]a = \frac{ 4.0- 0}{6} [/tex]
[tex]a = 0.6667m \s {}^{2} [/tex]
Jumping on a trampoline cause you to fly up in the air. What type of newton’s law is it ?
Answer:
The Third law
Explanation:
For every action there is an equal and opposite reaction.
Answer:
First Law
Explanation:
An object at rest (not moving) will stay at rest unless an unbalanced force acts on it.
An object in motion will stay in motion (in a straight line and at a constant speed) unless an unbalanced force acts on it.
You jump down on a trampoline and fly up in the air as a result.
I am a cell. I am long and thin. I reach all the way from the brain
to the tip of a finger. I have a special coat of fat that helps me do
my job. My job is to send electrical signals from one part of the
body to another.
Answer:
Neurons
Explanation:
We humans have a nervous system that coordinates our behavior and transmits signals between different parts of our body.
Now, this nervous system contains a lot of nerve cells which we call Neurons. These Neurons have a cell like body and their job is to transmit signals from one part of our body to another.
Thus, the cell is called Neurons.
While you were at the skate park, what did you notice about potential and kinetic energy
Answer: I only know that the skater riding down the ramp increeses it's kinetic energy.
Explanation:
A velocity selector uses a fixed electric field of magnitude E and the magnetic field is varied to select particles of various energies. If the electric field strength is 2.2 x 104 N/C, what should be the value of the magnetic field (in tesla) to select protons of velocity 6.4 x 105 m/s
Answer:
The value is [tex]B = 0.034 \ T [/tex]
Explanation:
From the question we are told that
The electric field strength is [tex]E = 2.2*10^{4} \ N/C[/tex]
The velocity is [tex]v = 6.4 *10^{5} \ m/s[/tex]
Generally the magnetic field is mathematically represented as
[tex]B = \frac{E}{v}[/tex]
=> [tex]B = \frac{2.2*10^{4}}{6.4 *10^{5}}[/tex]
=> [tex]B = 0.034 \ T [/tex]
help me get the answer in Physical Science.
Answer:
lithium
Explanation:
I took physical science 2 years ago and passed with an A