A boy on a bicycle approaches a brick wall as he sounds his horn at a frequency 400 Hz. The sound he hears reflected back from the wall is at a frequency 408 Hz. At what speed is the boy riding his bicycle toward the wall

Answer:

angle of reflection and angle of incident is always equal

Answer:

The answer is "0.5555 m"

Explanation:

Where the reference leaves the list and the viewer is at rest:

[tex]\lambda'=\frac{v-v_s}{v} \times \lambda\\\\[/tex]

   [tex]=\frac{343 \frac{m}{s} - (-62.4 \frac{m}{s})}{343 \frac{m}{s}} \times 0.47 \ m\\\\ =\frac{343 \frac{m}{s} + 62.4 \frac{m}{s}}{343 \frac{m}{s}} \times 0.47 \ m\\\\ =\frac{405.4 \frac{m}{s}}{343 \frac{m}{s}} \times 0.47 \ m\\\\ =\frac{405.4 \frac{m}{s}}{343 \frac{m}{s}} \times 0.47 \ m[/tex]

   [tex]=0.5555 \ m[/tex]

Answer:

By using [tex]v^{2}_{f} = v^{2}_{i} + 2a\Delta y[/tex], with [tex]v_{i} = -12m/s[/tex] and [tex]\Delta y = -40m[/tex]:

[tex]v^{2}_{f} = v^{2}_{i} + 2a/Delta y[/tex]

[tex]v^{2} = (-12m/s)^{2} + 2(-9.80m/s^{2})(-40m)[/tex]

[tex]v = -30m/s[/tex]

Explanation:

Hope this helped!

A rock is thrown downward from the top of a 40 m tall tower, with The speed of the rock just before hitting the ground will be equal to -30 m/s.

Friction is the resistance to a thing moving or rolling over another solid object. Although frictional forces can be advantageous, such as the traction required to walk while slipping, they also provide a significant amount of resistance to motion. In order to overcome frictional resistance in the moving parts, about 20% of an automobile's engine power is used.

The forces of attraction, also referred to as adhesion, between the contact zones of the surface, which are always minutely uneven, seem to be the main contributor to friction between metals.

From the given information in the question,

v²(f) = v²(i) + 2aΔy

v² = (-12 m/s)² + 2(-9.8)(-40)

v = -30 m/s.

Therefore, the velocity of the rock is -30 m/s.

To know more about Friction:

https://brainly.com/question/13000653

#SPJ2

Answer:

Since binary is only 1 and 0, you can use a flashlight to display something similar to Morse code (see explanation below)

Explanation:

In binary, 1 means "on" and 0 means "off". A way you can use visible light is through turning on and off a flashlight. If the flashlight is turned on, it would represent a 1. If the flashlight is turned off, it would represent a 0. To make the message easier and more accurately understood for the receiver make sure to flash the lights in a consistent pattern (ex. each flash lasts no longer than half a second, one second between each digit, etc.)

For example, let's say you're trying to send the message "11001"

  on     on    off     off     on

0       1       2       3       4       5      Numbers represent seconds

As you can see above the message starts at 0 seconds. Between 0 and 1 seconds the flashlight is turned on once. Between 1 and 2 seconds the flashlight is turned on again, Between 2 and 3 seconds as well as 3 and 4 seconds the flashlight is not turned on at all. And finally between 4 and 5 seconds the flashlight is turned on.

Answer:

The second one I think

Explanation:

B

Answer:

Dark matter:

- Doesn't interact with baryonic matter.

- It has not been observed directly

- dark matter does not absorb, reflect or even emit light, thereby making it to be extremely hard to spot. Therefore, it does not interact with electromagnetic radiation.

Explanation:

Dark matter:

- Doesn't interact with baryonic matter.

- It has not been observed directly

- dark matter does not absorb, reflect or even emit light, thereby making it to be extremely hard to spot. Therefore, it does not interact with electromagnetic radiation.

Baryonic matter:

- Has been observed directly because it includes nearly all the matter that we see in the world daily.

- It interacts with baryonic matter

- interacts with electromagnetic radiation

Dark Matter:

Baryonic Matter:

Dark matter can be defined as often invisible substances that are difficult to spot because they don't absorb, emit or reflect light.

Hence, dark matter do not affect human view because they do not interact or interfere with electromagnetic radiation (force).

Although, humans can see right through the (weakly interacting) dark matter but it has not been observed directly.

Baryonic matter can be defined as a dark matter that is made up of baryons such as neutrons, and protons. Also, they are ordinary matter (both fermions and hadrons), as distinct from exotic forms.

In conclusion. baryonic matter has been observed directly and it can interact with electromagnetic radiation.

Read more: https://brainly.com/question/15677526