A charity needs to report its typical donations received. The following is a list of the donations from one week. A histogram is provided to display the data.

10, 11, 35, 39, 40, 42, 42, 45, 49, 49, 51, 51, 52, 53, 53, 54, 56, 59

A graph titled Donations to Charity in Dollars. The x-axis is labeled 10 to 19, 20 to 29, 30 to 39, 40 to 49, and 50 to 59. The y-axis is labeled Frequency. There is a shaded bar up to 2 above 10 to 19, up to 2 above 30 to 39, up to 6 above 40 to 49, and up to 8 above 50 to 59. There is no shaded bar above 20 to 29.

Which measure of variability should the charity use to accurately represent the data? Explain your answer.

The range of 13 is the most accurate to use, since the data is skewed.
The IQR of 49 is the most accurate to use to show that they need more money.
The range of 49 is the most accurate to use to show that they have plenty of money.
The IQR of 13 is the most accurate to use, since the data is skewed.

Answer:

m = 6

Step-by-step explanation:

We have the proportion:

12/m = 18/9

To solve for m, we can cross-multiply the terms in the proportion:

12 × 9 = 18 × m

Simplifying both sides of the equation, we get:

108 = 18m

Dividing both sides by 18, we get:m = 6

Therefore, the solution to the proportion 12/m = 18/9 is m = 6.

Answer: m = 6

Step-by-step explanation:

First, we will rewrite this proportion:

     [tex]\displaystyle \frac{12}{m} =\frac{18}{9}[/tex]

Next, we will cross-multiply:

     12 * 9 = 18 * m

     108 = 18m

Lastly, we will divide both sides of the equation by 18:

     m = 6

We can also solve this proportion another way.

     We know that 18/9 = 2, so 12/m must equal 2 as well.

     12/6 = 2, so m = 6.

The probability of the sample mean being less than 79 is 77.64%

In order to solve the given problem we have to take the help of Standard error mean

SEM = ∑/√(n)

here,

∑ = population standard deviation

n = sample size

hence, the z-score can be calculated as

z = ( x' - μ)/σ/√(n)

here,

x' = sample mean

μ = population mean

σ = population standard deviation

n = sample size

adding the values into the formula

SEM = σ / √(n)

= 21/√64

= 2.625

z = (x' - μ)/SEM

= (79-77)/2.625

= 0.76

now, using standard distribution table we find that probability of a z-score is less than 0.77 then converting it into percentage

0.77 x 100

= 77%

The probability of the sample mean being less than 79 is 77.64%

To learn more about probability,

https://brainly.com/question/13604758

#SPJ4

Answer:

x = -5, x = 1

As (x, y) coordinates, the x-intercepts are (-5, 0) and (1, 0).

Step-by-step explanation:

The x-intercepts are the x-values of the points at which the curve crosses the x-axis, so when y = 0.

From inspection of the given graph, we can see that the parabola crosses the x-axis at x = -5 and x = 1.

Therefore, the x-intercepts of the parabola are:

As (x, y) coordinates, the x-intercepts are (-5, 0) and (1, 0).

The score to be made on the 4th quiz in order to have a mean quiz score of exactly 90 is equal to 88.

Let us consider the score that Tim needs to get on his fourth quiz be x.

Score he needs to get in order to have a mean quiz score of 90,

Set up an equation using the formula for the mean ,

(mean score) = (sum of scores) / (number of scores)

If Tim wants his mean quiz score to be 90, then we have,

⇒ 90 = (86 + 92 + 94 + x) / 4

Multiplying both sides by 4, we get,

⇒360 = 86 + 92 + 94 + x

Simplifying this equation, we get,

⇒ x = 360 - 272

⇒ x = 88

Therefore, Tim needs to get a score of 88 on his fourth quiz in order to have a mean quiz score of exactly 90.

Learn more about score here

brainly.com/question/31177688

#SPJ4

Recall the equation provided in the pdf:

   (125x ^ 3 * y ^ - 12) ^ (- 2/3) = (y ^ [A])/([B] * x ^ [c])

find A B and C.

The answer will be:

We can solve this problem using the rules of exponents and algebraic manipulation.

Starting with the left-hand side of the equation:

(125x^3 * y^-12)^(-2/3)

Using the rule that (a * b)^c = a^c * b^c, we can rewrite the expression as:

125^(-2/3) * x^(-2) * y^(8)

Simplifying further, we can use the fact that a^(-n) = 1/(a^n) to get:

1/(5^2 * x^2 * y^8/3)

Now, we can see that the denominator on the right-hand side of the equation must be 5^2 * x^2 * y^8/3. To find the numerator, we need to simplify the expression y^A. Comparing exponents, we see that:

y^A = y^(8/3)

Therefore, we need to find a value of A such that A = 8/3. Solving for A, we get:

A = 8/3

Now, we can write the equation as:

y^(8/3)/(5^2 * x^2 * y^8/3) = y^(8/3)/(25 * x^2 * y^(8/3))

Comparing exponents again, we see that we need to find values of B and C such that:

B * C = 2

and

-8/3 = -C

Solving for C, we get:

C = 8/3

Substituting this value of C into the first equation, we get:

B * 8/3 = 2

Solving for B, we get:

B = 3/4

Therefore, the solution is:

A = 8/3

B = 3/4

C = 8/3

Learn more about exponential algebra here:

https://brainly.com/question/12940982

#SPJ1

When the applet selects random samples from the town's population of babies, we assume that the population is large enough and diverse enough to accurately represent the characteristics and traits of the entire population.

We assume that the selection of the random samples is unbiased and that every member of the population has an equal chance of being selected for the sample.

Based on your question, we are discussing random samples taken from a town's population of babies this year. When selecting random samples from this population, we assume the following:

1. The population of babies is well-defined and includes all babies born in the town within the specified year.
2. The random samples are representative of the entire population, meaning that each baby has an equal chance of being selected in the sample.
3. The samples are independent, meaning that the selection of one baby does not influence the selection of another.

These assumptions ensure that the results obtained from the random samples can be generalized to the entire population of babies in the town for this year.

Learn more about random samples here:

https://brainly.com/question/15736806

#SPJ11

By assuming these conditions are met, we can perform statistical analyses on the random samples and make valid inferences about the entire population of babies in the town.

When an applet is selecting random samples from a town's population of babies this year, we typically assume the following about the population:
Independence:

Each baby selected in the sample is independent of the others, meaning that the outcome of one selection does not affect the outcome of another selection.
Randomness:

The applet chooses babies from the population in a random manner, ensuring that every baby has an equal chance of being selected.

Representativeness:

The random samples selected are representative of the entire population, meaning that the samples accurately reflect the characteristics of the town's population of babies as a whole.

For similar question on conditions.

https://brainly.com/question/28532738

#SPJ11

After 5 and a half minutes, the temperature of the water will be 77°F.

In this scenario, we are given that the initial temperature of the water is 80°F. We also know that the temperature of the water decreases by 0.5°F every minute. We want to find out what the temperature of the water will be after 5 and a half minutes.

To solve this problem, we need to use a bit of math. We know that the temperature of the water is decreasing by 0.5°F every minute. So after 1 minute, the temperature of the water will be 80°F - 0.5°F = 79.5°F. After 2 minutes, the temperature will be 79.5°F - 0.5°F = 79°F. We can continue this pattern to find the temperature after 5 and a half minutes.

After 5 minutes, the temperature of the water will be 80°F - (0.5°F x 5) = 77.5°F. And after another half minute (or 0.5 minutes), the temperature will decrease by another 0.5°F, so the temperature will be 77.5°F - 0.5°F = 77°F.

To know more about temperature here

https://brainly.com/question/11464844

#SPJ4

Answer:

c.

Step-by-step explanation:

The original triangle has two sides with length 4x each, and the hypotenuse has length 3y.

After the enlargement, each of the sides with length 4x becomes 3y × 4x = 12xy, and the hypotenuse becomes 3y × 3y = 9y^2.

Therefore, the perimeter of the enlarged triangle is the sum of the lengths of its three sides:

12xy + 12xy + 9y^2 = 24xy + 9y^2 = 9y^2 + 24xy

So the answer is (C) 9y^2 + 24xy.

Step-by-step explanation:

18-2x<3(2x-1)-3

21-2x<6x-3

24<8x

3<x

Interval notation

(3, ∞)

Compartmentalized is the type of data that is discussed in the problem researched by an employee rylie who is a newly hired cybersecurity expert for a government agency and has working experience in the private sector.

Data classification is the way of organizing data into different categories that make it easy to retrieve, sort and store for future use. In simple words, compartmentalization means to separate into isolated compartments or categories. In data language, A nonhierarchical grouping of information used to control access to data more finely than with hierarchical security classification alone is called Compartmentalization. Now, we have a rylie who is a newly hired cybersecurity expert for a government agency. She has working experience in the private sector. On basis of her experience she has discovered that, the private sector companies often had confusing hierarchies for data classification as compared to the government's classifications which are well known and standardized. During her training, she is researching data that requires special authorization beyond normal classification. The data type that she researched and that is authorization beyond normal classification is called compartmentalized data.

For more information about data classification, visit :

https://brainly.com/question/30580761

#SPJ4

Answer:

x ≈ 39.5°

Step-by-step explanation:

using the cosine ratio in the right triangle

cos x = [tex]\frac{adjacent}{hypotenuse}[/tex] = [tex]\frac{OP}{NP}[/tex] = [tex]\frac{64}{83}[/tex] , then

x = [tex]cos^{-1}[/tex] ( [tex]\frac{64}{83}[/tex] ) ≈ 39.5° ( to the nearest tenth )

Answer:

[tex]h(x)=2x^2-12x+9[/tex],  [tex]p(x)=-5x^2-20x-5[/tex]

Step-by-step explanation:

To get to the standard form of a quadratic equation, we need to expand and simplify. Recall that standard form is written like so:

[tex]ax^2+bx+c[/tex]

Where a, b, and c are constants.

Let's expand and simplify h(x).

[tex]2(x-3)^2-9=\\2(x^2+9-6x)-9=\\2x^2+18-12x-9=\\2x^2+9-12x=\\2x^2-12x+9[/tex]

Thus, [tex]h(x)=2x^2-12x+9[/tex]

Let's do the same for p(x).

[tex]-5(x+2)^2+15=\\-5(x^2+4+4x)+15=\\-5x^2-20-20x+15=\\-5x^2-5-20x=\\-5x^2-20x-5[/tex]

Thus, [tex]p(x)=-5x^2-20x-5[/tex]

The theoretical and experimental probability of rolling a 5 are 1/6 and 4/15 respectively.

We will calculate the theoretical probability by substituting 30 for the number of favorable outcomes as the die is rolled 30 times with one option each for 30 rolls and 180 for total number of outcomes in theoretical probability formula.

P(Theoretical probability of rolling a 5) = 30/180

P(Theoretical probability of rolling a 5) = 1/6.

The experimental probability is calculated by substituting 8 for the number of time the event occurs and 30 for the total number of trials.

P(Experimental probability of rolling a 5)= 8/30

P(Experimental probability of rolling a 5) =4/15

Read more about probability

brainly.com/question/24756209

#SPJ1

Answer:

To find the values of f(g(x)) for the given values of x, we need to first evaluate g(x) for each value of x, and then plug the result into f(x).

Using the given functions:

g(x) = 2x - 5

f(x) = √(x+1)

Therefore, we have:

f(g(x)) = √(g(x) + 1) = √(2x - 5 + 1) = √(2x - 4) = 2√(x - 2)

So, we can complete the table as follows:

x f(g(x))

4 2

10 4

20 6

34 8

52 10

Therefore, the completed table is:

x f(g(x))

4 2

10 4

20 6

34 8

52 10

The surface area of the actual ramp, including the underside, is approximately 15.38 yd².

What is triangle?

A triangle is a three-sided polygon with three angles. It is a fundamental geometric shape and is often used in geometry and trigonometry.

To find the surface area of the actual ramp, we need to first find the dimensions of the ramp.

We are given that the scale model of the ramp is a right triangular prism with legs of 8 in, 5 in, and 5 in, and a height of 3 in. We can use these dimensions to find the dimensions of the actual ramp.

Since the ramp is a scale model, the ratio of the dimensions of the model to the actual ramp is the same for all corresponding dimensions. The height of the triangular base in the actual ramp is given as 0.6 yards, which is equal to 21.6 inches. So, we have:

height of actual ramp / height of model = 21.6 in / 3 in = 7.2

We can use this ratio to find the dimensions of the actual ramp:

height of actual ramp = 7.2 * 3 in = 21.6 in

length of actual ramp = 7.2 * 8 in = 57.6 in

width of actual ramp = 7.2 * 5 in = 36 in

Now we can find the surface area of the actual ramp. The surface area of the top and bottom of the ramp is the area of the triangular base plus the area of the rectangle formed by the length and width of the ramp:

Area of triangular base = (1/2) * base * height = (1/2) * 5 in * 5 in = 12.5 in²

Area of rectangular top and bottom = length * width = 57.6 in * 36 in = 2073.6 in²

Total surface area of top and bottom = 2 * (Area of triangular base + Area of rectangular top and bottom) = 2 * (12.5 in² + 2073.6 in²) = 4153.2 in²

The surface area of the sides of the ramp is the area of the three rectangles formed by the height and width of the ramp:

Area of one side rectangle = height * width = 21.6 in * 36 in = 777.6 in²

Total surface area of sides = 3 * Area of one side rectangle = 3 * 777.6 in² = 2332.8 in²

Finally, we add the surface area of the top and bottom to the surface area of the sides to get the total surface area of the ramp:

Total surface area of ramp = Surface area of top and bottom + Surface area of sides = 4153.2 in² + 2332.8 in² = 6486 in²

Converting to yards and rounding to two decimal places, we get:

Total surface area of ramp = 6486 in² / (36 in/yd)² = 15.38 yd² (rounded to two decimal places)

Therefore, the surface area of the actual ramp, including the underside, is approximately 15.38 yd².

To learn more about triangle from the given link:

https://brainly.com/question/2773823

#SPJ1

Answer:

Step-by-step explanation:

domain is -infinity to positive infinity range is -3 to infinity. Increasing from -3 to infinity and decreasing from - infinity to -3 and it’s minimum

Answer:

The correct answer is:

10√2

Explanation:

In a right triangle, the hypotenuse is the side opposite the right angle and is also the longest side. The other two sides are called the legs.

In this problem, the hypotenuse of the resulting triangles is given as 20 inches. Since the quilt squares are cut on the diagonal to form triangular quilt pieces, the hypotenuse of each triangle is formed by the diagonal cut of a square.

Let's denote the side length of each square as "s" inches.

According to the Pythagorean Theorem, which relates the sides of a right triangle, the square of the length of the hypotenuse is equal to the sum of the squares of the lengths of the two legs.

In this case, the hypotenuse is 20 inches, so we have:

20^2 = s^2 + s^2 (since the two legs of the right triangle are the sides of the square)

400 = 2s^2

Dividing both sides by 2, we get:

200 = s^2

Taking the square root of both sides, we get:

s = √200

Since we are looking for the side length of each piece in simplified radical form, we can further simplify √200 as follows:

√200 = √(100 x 2) = 10√2

So, the side length of each quilt piece is 10√

The side length of each piece of the triangular pieces of quilt cut from squares will be 10√2 inches.

This is a simple mathematics problem that can be solved using the Pythagoras theorem. This theorem states that in a right-angled triangle, the square root of the sum of the two perpendicular sides (p,b) is equal to the longest side, called the hypotenuse (h).

[tex]h = \sqrt{p^2 + b^2}[/tex]

Since the triangle pieces have been cut from a square, they will be right-angled triangles, and the two perpendicular sides will be equal, i.e., p = b.

20 = √2p²  (since p and b are equal, b can be taken as p)

On squaring both sides,

400 = 2p²

p² = 400/2

p² = 200

p = √200

p = 10√2 = b

To know more about Pythagoras theorem,

https://brainly.com/question/28981380

Answer:

50 meters/21.91 seconds = 2.282 m/sec

The correct answer is option B. Translate 1 to the left, scale vertically by 1/2, then reflect over the y-axis.

The process of modifying the shape, location, or features of a graph is often referred to as graph transformation. Graphs are visual representations of mathematical functions or data point connections, often represented on a coordinate plane.

Translations, reflections, rotations, dilations, and other changes to the look of a graph are examples of graph transformations.

For the given problem, Transformation to get the desired result can be carried out as:

Hence, to convert the graph of "y = k(x)" to the graph of "y = -k(x + 1)," the correct sequence of transformations is to translate 1 unit to the left, scale vertically by 1/2, and then reflect across the y-axis, which is option B.

Learn more about Graph Transformation here:

https://brainly.com/question/10059147

#SPJ1

Testing is only one part of the overall assessment process.

What is evaluation in education?

Assessment is an ongoing process of gathering evidence of what each student actually knows, understands, and can do. A comprehensive evaluation approach includes a combination of formal and informal evaluation (formative, preliminary, and summative).

What is an assessment? Also what does it mean?

At the course level, assessments provide important data on the breadth and depth of student learning. Evaluation is more than scoring. It's about measuring student learning progress. Assessment is therefore defined as “the process of data gathering to better understand the strengths and weaknesses of a student's learning”. 

Learn more about assessment

brainly.com/question/28046286

#SPJ1

Thus, the total surface area of cylinder is found to be 480π sq. cm.

A cylinder's surface area is made up of its two congruent, parallel circular sides added together with its curved surface area. You must determine the Base Area (B) and Curved Surface Area in order to determine the surface area of a cylinder (CSA).

As a result, the base area multiplied by two and the area of a curved surface add up to the surface area or total surface of a cylinder.

Given data:

radius r = 8 cm

Height h = 22 cm

Total surface area of cylinder = 2*area of circle + area of curved cylinder

TSA = 2πr² + 2πrh

TSA = 2π(8)² + 2π(8)(22)

TSA = 2π(64) + 2π(176)

TSA = 128π + 352π

TSA = 480π sq. cm.

Thus, the total surface area of cylinder is found to be 480π sq. cm.

Know more about the surface area of cylinder:

https://brainly.com/question/27440983

#SPJ1

Complete question-

Find the surface area of the cylinder with radius of 8 cm and height of 22 cm. write the answer in terms of pi and round the answer to the nearest hundredths place.

Thus, the on average the contents weight for the transatlantic shipping is found as  24.7  pounds.

Given dimension of rectangular prism

Length l = 4ft

width w = 9.5 ft

height h = 13 ft

Volume of rectangular prism = l*w*h

V = 4*9.5*13

V = 494 ft³

Now,

1  ft³ = 0.05 pounds

So,

weight of  494 ft³ =  494*0.05 pounds

weight of 494 ft³ =  24.7  pounds

Thus, the on average the contents weigh for the transatlantic shipping is found as  24.7  pounds.

know more about the rectangular prism

https://brainly.com/question/24284033

#SPJ1

where t is measured in days, and A(t) represents the amount of flooded land at time t. This function has a B-value of -0.3118.

To model the situation of the flood, we can use an exponential decay function, which represents the decreasing amount of flooded land over time. The function can be written as:

[tex]A(t) = A0 * e^{(-kt)}[/tex]

where A(t) is the amount of flooded land at time t, A0 is the initial amount of flooded land, k is a constant representing the rate of decay, and e is the mathematical constant approximately equal to 2.718.

To determine the value of k, we can use the given information that after 2 days, only 3375 acres of land were under water. Substituting t = 2 and A(t) = 3375 into the equation above, we get:

[tex]3375 = A0 * e^{(-2k)[/tex]

We also know that initially, there were 6000 acres of land under water. Substituting A0 = 6000 into the equation above, we get:

Dividing both sides by 6000, we get:

ln(0.5625) = -2k[tex]ln(0.5625) = -2k[/tex]

Taking the natural logarithm of both sides, we get:

[tex]ln(0.5625) = -2k[/tex]

Solving for k, we get:

[tex]k = -ln(0.5625)/2[/tex]

k ≈ 0.3118

Therefore, the function to model the situation of the flood is:

[tex]A(t) = 6000 * e^{(-0.3118t)}[/tex]

To learn more about function, visit

https://brainly.com/question/12431044

#SPJ1

Answer:

236 cm^2  and  8 cm

Step-by-step explanation:

width=w

240=6(5)(w)

w=8 cm

area=2[(6)(5)+(6)(8)+(5)(8)]

area=236 cm^2

The surface area of the two solids are listed below:

Case 1 - 232 square centimeters

Case 2 - 240 square centimeters

The surface area of a solid is the sum of the areas of all its faces. There are two cases of solids whose surface areas must be determined. The area formulas for triangle and rectangle are, respectively:

Triangle

A = 0.5 · b · h

Rectangle

A = b · h

Case 1

A = (6 cm) · (8 cm) + 2 · 0.5 · (6 cm) · (12 cm) + 2 · 0.5 · (8 cm) · (14 cm)

A = 232 cm²

Case 2

A = 2 · 0.5 · (8 cm) · (3 cm) + (8 cm) · (12 cm) + 2 · (5 cm) · (12 cm)

A = 24 cm² + 96 cm² + 120 cm²

A = 240 cm²

To learn more on surface areas of solids: https://brainly.com/question/31126484

#SPJ1

The profit (p) is $7500 generated by selling 1500 units of a certain commodity is given by the function p ( x ) = - 1500 + 12 x - 0.004 x²

To maximize our profit, we must locate the vertex of the parabola represented by this function. The x-value of the vertex indicates the number of units that must be sold to maximize profit.

We may use the formula for the x-coordinate of a parabola's vertex:

x = -b/2a

where a and b represent the coefficients of the quadratic function ax² + bx + c. In this situation, a = -0.004 and b = 12, resulting in:

x = -12 / 2(-0.004) = 1500

This indicates that when 1,500 units are sold, the profit is maximized.

To calculate the greatest profit, enter x = 1500 into the profit function:

P(1500) = -1500 + 12(1500) - 0.004(1500)^2

P(1500) = -1500 + 18000 - 9000

P(1500) = $7500

Therefore, the maximum possible profit is $7,500 and it is generated when 1,500 units are sold.

Learn more about Profit maximization:

https://brainly.com/question/30436087

#SPJ4

To achieve this maximum profit, exactly 1500 units must be sold.

To find the maximum profit and the number of units needed to generate it, we can use the given profit function p(x) = -1500 + 12x - 0.004x^2. We need to find the vertex of the parabola represented by this quadratic function, as the vertex will give us the maximum profit and the corresponding number of units.

Step 1: Identify the coefficients a, b, and c in the quadratic function.
In p(x) = -1500 + 12x - 0.004x^2, the coefficients are:
a = -0.004
b = 12
c = -1500

Step 2: Find the x-coordinate of the vertex using the formula x = -b / (2a).
x = -12 / (2 * -0.004) = -12 / -0.008 = 1500

Step 3: Find the maximum profit by substituting the x-coordinate into the profit function p(x).
p(1500) = -1500 + 12 * 1500 - 0.004 * 1500^2
p(1500) = -1500 + 18000 - 0.004 * 2250000
p(1500) = -1500 + 18000 - 9000
p(1500) = 7500

So, the maximum profit is $7,500, and 1,500 units must be sold to generate it.

To learn more about parabola: brainly.com/question/8227487

#SPJ11

Answer:

$525

Step-by-step explanation:

Jackie starts with $500, and the interest rate is 5% per year.

This means that, after one year, Jackie will have accumulated 5% interest with the $500 she put into the savings account.

Now, we can find 5% of $500 by converting 5% to its fraction form, which is 5/100. 5% of a value means that you need to multiply the fraction (or decimal) by the said value. So, we have:

[tex]\frac{5}{100}[/tex] · 500 =

[tex]\frac{2500}{100}[/tex] =

25

Therefore, the amount of interest she has accumulated in one year is $25. Combined with the money in her savings account, she has $525, since $500 + $25 = $525.

Part A: A reasonable domain to plot the growth function would be from d = 0 to d = 11.

Part B: The y-intercept of the graph of the function f(d) is 7

Part C: The average rate of change of the function f(d) from d = 4 to d = 11 is approximately 0.64 mm/day.

The domain of a function represents the set of input values for which the function is defined and can produce a meaningful output.

The y-intercept of a function represents the value of the function when the input is equal to zero.

The average rate of change of a function from x = a to x = b is given by the slope of the secant line passing through the points (a, f(a)) and (b, f(b)).

Here we have

A biologist is studying the growth of a particular species of algae. She writes the following equation to show the radius of the algae, f(d), in mm, after d days:

=> f(d) = 7(1.06)^d

Since it is given that the radius of the algae was approximately 13.29 mm when the biologist concluded her study, we can set f(d) = 13.29  

=> 13.29 = [tex]7(1.06)^{d}[/tex]

=> ln(13.29/7) = d ln(1.06)

=> d = ln(13.29/7)/ln(1.06) ≈ 11  

Therefore, A reasonable domain to plot the growth function would be from d = 0 to d = 11.

Part B: The y-intercept of the graph of the function f(d) represents the value of the function when d = 0.

Substituting d = 0 into the given equation, we get:

f(0) = 7(1.06)⁰ = 7

Therefore, The y-intercept of the graph of the function f(d) is 7

Part C: The average rate of change of the function f(d) from d = 4 to d = 11 is given by the slope of the secant line passing through the points (4, f(4)) and (11, f(11)). Using the given equation, we can evaluate f(4) and f(11):

f(4) = 7(1.06)⁴ ≈ 8.84

f(11) = 7(1.06)¹¹ ≈ 13.29

The slope of the second line passing through these two points is:

Slope = (f(11) - f(4))/(11 - 4) = [ 13.29 - 8.84]/7 = 0.64

Therefore,

The average rate of change of the function f(d) from d = 4 to d = 11 is approximately 0.64 mm/day.

Learn more about Functions at

https://brainly.com/question/24839787

#SPJ1

Answer:

The answer is 28

Step-by-step explanation:

sin0=opp/hyp

let hyp be x

sin30=14/x

0.5x=14

divide both sides by 0.6

x=14/0.5

x=28