a chemist employed by an airplane manufacturer investigates new adhesives for the purpose of building airplanes without rivets. she is engaged in ________.

The percent ionization of the acid is obtained as 21%.

We know that a weak acid is said to be the kind of acid that is not able to ionize completely in solution. The implication of this is that we are still going to have some of the acid that have not be ionized in the system at the end of the reaction.

We know that;

α = √Ka/Co

α = Percent ionization

Ka = acid dissociation constant

Co = Initial concentration

Hence, we have;

α = √0.00839/0.199

= 0.21 or 21%

Learn more about percent dissociation:https://brainly.com/question/16848897

#SPJ1

First ⬆️. Second ⬆️

I hope this helps ✌

As in the context of drug misuse, the following chemical types are linked to their corresponding definitions of misuse:

Drug misuse refers to the incorrect or harmful use of a substance, including prescription and over-the-counter drugs, as well as illegal drugs. This can include taking a higher dose than prescribed, using someone else's medication, using a drug for non-medical purposes, or combining drugs in a way that is dangerous. Drug misuse can lead to negative health consequences and may also contribute to the development of a substance use disorder.

Prescription drugs (not in the context of misuse) are medications that are prescribed by a healthcare professional and are intended for use in the treatment of a specific medical condition.

Nonprescription drugs, also known as over-the-counter (OTC) drugs, (not in the context of misuse) are substances that are available for purchase without a prescription. They are used to treat common health issues, such as pain or a headache, but can also be abused. Chemicals refer to any substance, whether natural or man-made, that can be used for a specific purpose, including but not limited to drugs.

Learn more about drug abuse here: brainly.com/question/1189815

#SPJ4

The force that resists the relative motion of two bodies is referred to as irreversibility. Examples of this include chemical reactions, mixing two fluids, and electrical resistance.

Why do we use the term "chemical"?

Any material with a known composition is a chemical. To put it another way, a chemical always consists of the same "substance." There are some substances in nature, like water. Chlorine and other chemicals are made at factories.

What instances from chemistry?

All of these things are made of chemical, some natural and others synthetic, including air, water, iron, fuel, clothes, stone, equipment, plastics, plants, and food. Chemicals can be made up of several different chemicals or they can be specific chemical molecules like water. Ammonia, oxygen, water, carbon dioxide, and other substances are all present in air.

To know more about chemical visit:

https://brainly.com/question/292401834

#SPJ

Raising the activation energy would decrease the rate of a chemical reaction.

The rate of a chemical reaction refers to the speed at which the reactants are converted into products. There are several factors that can affect the rate of a chemical reaction, including the concentration of reactants, temperature, and the presence of catalysts or inhibitors.

Adding more reactants would generally increase the rate of a chemical reaction, as there would be more particles present to collide and react. Stirring the reaction more vigorously would also increase the rate of the reaction, as it would increase the chances of successful collisions between reactant particles. Squeezing the reactants into a smaller volume would also increase the rate of the reaction, as it would increase the concentration of reactants and the chances of successful collisions.

On the other hand, increasing the temperature would generally increase the rate of a chemical reaction, as it would increase the kinetic energy of the reactant particles and increase the chances of successful collisions.

However, raising the activation energy would decrease the rate of a chemical reaction, as it would require more energy for the reactant particles to overcome the activation energy barrier and undergo a successful reaction. Activation energy is the energy required to start a chemical reaction.

Learn more about activation energy here:

https://brainly.com/question/1380484

#SPJ4

A color's degree of purity is measured by intensity, commonly referred to as saturation or chroma. While a low-intensity color is more muted or neutral, a very intense hue is dazzling.

The complete question is,

What is a hue that is quite intense?

To learn more about color's intensity refer to:

https://brainly.com/question/1366347

#SPJ1

The arrows depict the substance's carbon dioxide emission.

A substance is a material that has specific qualities and a specific composition. A substance is any unadulterated element or pure composite. By using any physical technique, a substance cannot be separated. A pure substance has fixed properties/composition. Iron and sugar are two examples of substances.

Matter with a definite composition and set of characteristics is referred to as a substance. A substance is every pure element. It is a material when it is pure. Substance examples: Because iron is an element, it is also a substance. Methane is both a material and a compound.

To know more about Material visit:

https://brainly.com/question/28646672

#SPJ1

The maximum height that is attained by the ball that leaves the hand is 1.8 m.

We know that we can be able to use the equation of the motion of a body that occurs under gravity to be able to obtain the maximum height that has been attained by the ball as it is leaving the hand of the girl.

We would then have that;

v^2 = u^2 - 2gh

v = final velocity

u = initial velocity

g = acceleration due to gravity

h = height of the ball

If v = 0 m/s at the maximum height

u^2 = 2gh

h = u^2/2g

h = (6)^2/2 * 9.8

h = 36/19.6

h = 1.8 m

Learn more about maximum height:https://brainly.com/question/11535666

#SPJ1

The lowest energy orbital will be closest to the nucleus of an atom. Each and every orbital is filled with electrons in the order: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p, and so on.

The lowest energy sublevel always be the 1s sublevel, which consists of one orbital. The single electron of an hydrogen atom will be occupy the 1s orbital when the atoms are in its ground state. As we proceed with atoms with multiple electrons, those electrons are added to the next lowest sublevel: 2s, 2p, 3s, and so on. Orbitals will be ranked in the increasing order of orbital energy as follows: 1s < 2s = 2p < 3s = 3p = 3d <4s = 4p = 4d= 4f.

To now more about lowest energy here

https://brainly.com/question/28609057

#SPJ4

The equation NaCl + AgNO3 => AgCl + NaNO3 incorporates the physical states for the synthesis reaction that took place in experiment 1. Factors are denoted by symbols in chemical equations.

When two or more chemical equations combine in a synthesis reaction, the result is A + B AB. This form makes it easy to spot synthesis reactions because there are more reactants than products. When two or more reactants react, a larger compound is produced depending on the direction of the reaction and the physical characteristics of the reactants. In 1615, chemist Jean Beguin of France formulated the first chemical equation. Chemical processes are present everywhere, beginning with food metabolism.

Learn more about chemical equations here

https://brainly.com/question/30087623

#SPJ4

The bones are 16925 years old.

The process of carbon dating involves counting the amount of the radioactive isotope carbon-14 that is present in a sample. As carbon-14 breaks down into nitrogen-14 over time, less of it is present. Scientists can determine how recently an organism died by calculating the ratio of carbon-14 to carbon-12 in a sample. Now to know the age of the bones we must directly use the radioactive decay law: d N d t ∝ N

Where the rightmost part of the equation comes from the statement that the activity found is just 15.0% of the activity that would be found in a similar live animal. This means that the number of carbon-14 atoms is just  15.0% of what it was at the moment the saber-toothed tiger died.

To know more about saber-toothed tiger:

https://brainly.com/question/24330911

#SPJ4

H2(g) + 2ICI(g) = 2HCI(g) + I2(g) is the overall reaction  Step 2's rate law is rate = k [HI][ICI]

It is critical to consider not only the chemical properties of the reactants, but also the conditions under which the reaction occurs, the mechanism by which it happens, the rate at which it occurs, and the equilibrium toward which it is progressing in a chemical reaction. The substances that influence the reaction rate are usually one or more of the reactant's side, but products can also be included. Catalysts, which are not included in the balanced chemical equation, can also influence the reaction rate.

For a chemical reaction, the rate law (also known as the rate equation) is an expression that describes the relationship between the rate of the response and the concentrations of the reactants involved.

Learn more about rate law here:

https://brainly.com/question/14779101

#SPJ4

The complete question is:

Step 1:

H2(g) + ICl(g) ----------- HI(g) + HCI(g) (slow)

Step 2:

HI(g) + ICI(g) ------------ HCI(g) + I2 (g) (fast)

Which of the following represents the overall chemical equation for the reaction and the rate law for elementary step 2?

A) The overall reaction is H2(g) + 2 ICI(g) --------- HCI(g) + I2(g); the rate law for step 2 is rate = k[H2] [HI] [ICI]

B) The overall reaction is H2(g) + 2 ICI(g) -------- 2 HCI(g) + I2(g); the rate law for step 2 is rate = K[H2][ICI]2.

C) The overall reaction is Ha(g) + ICI(g) --------- HCI(g) + 1(g); the rate law for step 2 is rate = K-[H2][ICI].

D) The overall reaction is H2(g) + 2 ICI(g) ------- 2 HCI(g) + I2 (g); the rate law for step 2 is rate = [K][HI] [ICI]

The earth's force would be applied to the object (the earth) in a downward direction, toward the planet's centre. The force that the mineral oil would apply to the object (fmineraloil) would be directed

Mineral oil is a liquid that is produced from petroleum and is transparent, colourless, and odourless. It frequently appears in a wide range of consumer and industrial goods, including lubricants, fuels, cosmetics, and personal care products. Mineral oil functions as a moisturiser and occlusive agent in cosmetics and personal care products, helping to stop water loss from the skin. In several applications for food processing, it is also utilised as a lubricant. Despite its extensive use, certain questions have been raised regarding mineral oil's possible negative effects on health, particularly when it is used in cosmetics and personal care items. According to certain research, regular use of products containing mineral oil may cause skin irritation and blocked pores. But there is conflicting da

Learn more about Mineral oil here:

https://brainly.com/question/12899264

#SPJ4

An molecule is polar if the lengths of the arrows differ and they not balance each other.

Pay close attention to the sound. the smallest part of a molecular that includes both its physical and chemical properties pronounced (MAH-leh-kyool). Molecules are made up of one or more electrons.

Molecules are created when atoms come together. Two hydro (H) ions and one oxygenation (O) atom make up the three atoms that make up a water molecule. Because of this, water is occasionally abbreviated as H2O. There are trillions of water molecules in a single drop of liquid.

To know more about molecule visit:

https://brainly.com/question/16900319

#SPJ4

The reaction of 2,2-dimethyl-1-propanol, also known as the neopentyl alcohol with HBr gives 2-bromo-2-methylbutane as the major product. It is a SN₁-mechanism.

Neopentyl alcohol is a primary alcohol, but the bulky group has hindered it. The backside attack is not possible, so instead of the SN₂ mechanism SN₁ followed to get the desired rearranged product. The reaction will forms a rearranged stable carbocation from the primary carbocation to the tertiary carbocation.

Protonation of the Neopentyl alcohol will converts the hydroxy group into a good leaving group. Water will leaves form a primary carbocation rearranged through the methyl shift, which is thus forming a stable tertiary carbocation. Bromide ion will also attacks the carbocation to form a product 2-bromo-2-methylbutane. Mechanism will showing the formation of 2-bromo-2-methylbutane.

To know more about carbocation here  

https://brainly.com/question/14147603

#SPJ4

Control of metal-support interactions (MSIs) in heterogeneous catalysts can enhance both activity and selectivity.

MSIs refer to the interactions between the metal catalyst and the support material it is placed on. By fine-tuning the MSIs, the activity of the catalyst can be increased by optimizing the distribution and dispersion of the metal particles. In addition, by controlling the MSIs, the selectivity of the catalyst can be improved, allowing for the production of specific products in a reaction. This is done by manipulating the electronic and geometric properties of the metal-support interface, which affect the adsorption and activation of reactant molecules.

In general, controlling MSIs is a powerful way to make heterogeneous catalysts work better.

Learn more about metal interactions here: brainly.com/question/19153185

#SPJ4

The carbon that is SP2 hybridized in the compound is carbon 4 (C4).

When we talk about the hybridization of the carbon atom, we mean the fact that the orbitals that are in the carbon atom are mixed in such a way that the orbitals that have the appropriate energy to be able to participate in the chemical bonds are formed.

As such looking at the compound that we have been shown in the image, we can see that not all the carbon atoms would be at the same state of hybridization.

Learn more about hybridization:https://brainly.com/question/14140731

#SPJ1

Answer: B

Explanation:

The heat of reaction when a sodium chloride solution is formed using a 10.0 g sample of NaCl(s) and 50.0 ml of water in a coffee cup calorimeter. The equation is :

E. q = ((60.0 g)(4.18 J/g K)(T f - T i))/(10.0 g/(58.44 g/mol))

Given that :

The mass of the NaCl = 10 g

The volume of sample = 50 mL

The molar heat of the reaction for NaCl ( sodium chloride ) = + 3.9 kJ/mol

The equation for the heat is given as :

q = m c ΔT

Where,

q = heat energy

m = mass

c = specific heat capacity

ΔT = change in temperature

Therefore the equation is given as :

q = m c ΔT

q = ( 50 g + 10 g) (4.184 J/g °C) (T f - T i)

q / mol = q water / mol NaCl

q = ((60.0 g)(4.18 J/g K)(T f - T i)) / (10.0 g/(58.44 g/mol))

The given question is incomplete, the complete question is :

You want to determine the molar heat of solution of sodium chloride using a 10.0 g sample of NaCl(aq) and 50.0 mL of water in a coffee cup calorimeter. Which of the following equations would you use? Assume the specific heat of the solution is the same as the specific heat of water.

A. q = (50.0 g)(4.18 J/g K)(T i - T f)

B. q = ((10.0 g)(4.18 J/g K)(T f - T i))/(10.0 g/(58.44 g/mol))

C. q = (60.0 g)(4.18 J/g K)(T f - T i)

D. q = (60.0 g)(4.18 J/g K)(T i - T f)

E. q = ((60.0 g)(4.18 J/g K)(T f - T i))/(10.0 g/(58.44 g/mol))

To learn more about heat here

https://brainly.com/question/16267186

#SPJ4

An allylic lone pair is the appropriate positioning for the curved arrows to indicate resonance for the specified allylic carbocation.

The carbocation is indeed an organic molecule that develops when two valence electrons, which are typically shared by two atoms of carbon, are lost from such a carbonyl group that already possesses four bonds. As a result, a carbon atom with three rather than four bonds and a positive charge is created.

All carbon atoms in carbocations, also referred to as carbonium ions, are positively charged. A ion is indeed a positive charge, and the "carbo" part of the term refers to an atom of carbon.

To know more about carbocation visit:

https://brainly.com/question/19168427

#SPJ4

The following are the net ionic processes for removing chromium (III) and cadmium from wastewater using sodium hydroxide: Sodium hydroxide with chromium (III): Cr3+(aq) + 3NaOH(aq) -> Na3Cr(OH)3.

Cadmium in the presence of sodium hydroxide: Cd2+(aq) + 2NaOH(aq) -> Na2Cd(OH)2. Metal ions react with hydroxide ions in both processes to generate insoluble metal hydroxide precipitates that can be readily removed from the solution. Precipitation is a treatment method that is excellent for removing heavy metal ions from wastewater.chromium and cadmium can be removed from wastewater by treatment with sodium hydroxide. show the net ionic reactions of cr3 (aq) with naoh(aq) and cd2 (aq) with naoh(aq).The following are the net ionic processes for removing chromium (III) and cadmium from wastewater using sodium hydroxide: Sodium hydroxide with chromium (III): Cr3+(aq) + 3NaOH(aq) -> Na3Cr(OH)3.

learn more about hydroxide  here:

https://brainly.com/question/4251554

#SPJ4

The temperature in Celsius and kelvin is 50°C and 323.15 K.

The three most used temperature scales for usage in business, science, and daily life are Kelvin, Celsius, and Fahrenheit.

A scale in Kelvin is absolute. There are no degree symbols after its values, which begin at absolute zero.

Both Celsius and Fahrenheit are relative scales. The degree symbol is used to indicate Fahrenheit and Celsius temperatures.

Given the temperature is 122°F

Temperature in Celsius is -

⇒ C = (F - 32)/1.80

⇒ C = (122 - 32) / 1.80

⇒ C = 90 / 1.80

⇒ C = 50°C

Temperature in Kelvin is -

K = 5/9(F - 32) + 273.15

⇒ K = 5/9 (122 - 32) + 273.15

⇒ K = 323.15 K

To learn more about temperature in Celsius and kelvin from given link

https://brainly.com/question/13165448

#SPJ1

The empirical formula of a compound with 7.8% carbon and 92.2% chlorine is CCl₄ and that of a compound with 10.0% C, 0.80% H and 89.1% Cl is CHCl₃.

In order to determine the empirical formula of the compounds, we have to divide the percentage by mass of each of the elements by their relative atomic masses and then divide them through the lowest ratio.

Carbon = 7.8%

7.8/12 = 0.65

Chlorine = 92.2%

92.2 / 35.5 = 2.59

Dividing by the lowest ratio,

Carbon  = 0.65/0.65 = 1

Chlorine = 2.59/0.65 = 3.98 ≅ 4

So the empirical formula is CCl₄.

Hydrogen = 0.80%

0.80/1 = 0.80

Chlorine = 89.1%

89.1/35.5 = 2.50

Carbon = 10.0%

10/12 = 0.83

Dividing by the lowest ratio,

Hydrogen = 0.80/0.80 = 1

Carbon = 0.83/0.80 = 1.03  ≅ 1

Chlorine = 2.50/0.80 = 3.1  ≅ 3

So the empirical formula is CHCl₃

To know more about empirical formula here

https://brainly.com/question/17409468

#SPJ4

Answer:

It sounds like the writer's experiences of scouting have had a profound impact on his life. He values the connection with nature and the skills he learnt, as well as the importance of preserving the environment for future generations. He also mentions the words and phrases associated with scouting, which he says can act as a reminder of the experience and the joy he felt during his time in the Scouts. It's clear that the writer values the experiences of scouting and has a strong appreciation for the outdoors.

The correct reading of the volume in the pictured burette is e) 39.95 mL. The picture is attached below.

The purpose of the burette reading is to show that how much the solution has been dispensed, not the how much the burette contains. As compared to the volumetric glassware, the zero scale on the burette is written on the top. The Measurement scale on the burette is at the 1.0 intervals.

The intervals can be calculated as :

Intervals = (larger value - small value) / 2

Intervals = 1

The reading will be 39.95 mL.

Thus, according to the picture of the burette, the reading of the burette is the 39.95 mL.

To learn more about burette here

https://brainly.com/question/28145960

#SPJ4

The mass of the gold with the density of 19.3 g/cm³ with dimensions of 10.0 in x 4.00 in x 3.00 in is 38,011.48 grams.

The mass of a substance can be calculated from the density by using the following expression;

Density = mass ÷ volume

According to this question, the dimensions of gold is given as 10.0 in x 4.00 in x 3.00 in. The density of gold is 19.3 g/cm³.

Volume of gold = 10 × 4 × 3 = 120in³

120in³ is equivalent to 1966.45cm³

19.3g/cm³ = mass ÷ 1966.45cm³

mass = 19.3 × 1966.45

mass = 38,011.48 grams.

Learn more about mass at: https://brainly.com/question/10397467

#SPJ1

Oxygen is a reactant of cellular respiration while being the product for photosynthesis.

It is defined as a process by which plants and other photosynthetic organisms convert the light energy in to chemical energy  through the process of cellular respiration.

Some of the energy which is converted  is stored in molecules of carbohydrates like sugar and starches  which are made up of from carbon dioxide and water . Photosynthetic organisms which can perform photosynthesis  are algae and cyanobacteria. Photosynthesis is largely responsible for producing and maintaining the content of oxygen in earth's atmosphere.

Learn more about photosynthesis,here:

https://brainly.com/question/29764662

#SPJ1

Xe and Pb are atomic elements. I₂ and Br₂ are molecular elements. CaCl₂ and Al₂S₃ are ionic compounds and NO₂ and H₂S are molecular compounds.

Atomic elements are the elements which cannot be broken down further and combine together to form molecules. Among the substances given to us, Xenon (Xe) and Lead (Pb) can be categorised as atomic elements. Molecular elements are formed when the same elements combine with each other. I₂ and Br₂ are molecular elements.

Ionic compounds are consist of ions bound together. CaCl₂ and Al₂S₃ are ionic compounds. Molecular compounds are formed up of two or more elements and NO₂ and H₂S are molecular compounds.

To know more about ionic compounds here

https://brainly.com/question/9167977

#SPJ4

The linear order of amino acids (primary structure), with the varying properties of their side chains (R groups), determines what secondary and tertiary structures will form to produce a protein. The resulting unique three-dimensional shapes of proteins are key to their specific and diverse functions.

Amino acids are the building blocks of proteins, and the order of their assembly is known as the primary structure.

Each amino acid has a side chain, or R group, that is composed of different atoms, giving each amino acid a unique property that affects the structure and function of the proteins they create.

Depending on the primary structure and the chemical characteristics of the side chains, proteins can assume a variety of secondary and tertiary structures. It is these unique three-dimensional shapes that enable proteins to carry out their specific and varied functions.

To learn more about amino acids, click here:

https://brainly.com/question/14583479

#SPJ4