a cliff diver pushes off horizontally from a cliff and lands in the ocean 2.00 s later. how fast was he going when he entered the water?

The order of increasing energy per photon is radar signals (lowest), radiation in a microwave oven, and gamma rays from nuclear radiation (highest).

To rank the following types of radiation in order of increasing energy per photon, we have: a. radar signals, b. radiation in a microwave oven, c. gamma rays from nuclear radiation.

1. Radar signals: These have the lowest energy per photon among the three mentioned types of radiation. Radar signals are a type of radio wave, which are on the lower end of the electromagnetic spectrum.

2. Radiation in a microwave oven: Microwaves have higher energy per photon compared to radar signals but lower than gamma rays. They are located between radio waves and infrared waves on the electromagnetic spectrum.

3. Gamma rays from nuclear radiation: These have the highest energy per photon among the three types of radiation. Gamma rays are on the higher end of the electromagnetic spectrum and are produced by nuclear reactions, cosmic rays, and other high-energy processes.

Learn more about energy:

https://brainly.com/question/13881533

#SPJ11

In the same amount of time, an object with more speed will travel a greater distance than an object with less speed.

The relationship between speed and time for moving objects can be described using the equation:

Speed = Distance / Time

This equation shows that the speed of a moving object is directly proportional to the distance it covers and inversely proportional to the time it takes to cover that distance.

In other words, if the distance remains constant, the faster an object moves, the less time it takes to cover that distance. Conversely, if an object moves at a slower speed, it takes more time to cover the same distance.

Learn more about speed:https://brainly.com/question/28224010

#SPJ1

The amplitude of the magnetic field of the electromagnetic wave is 6.53 x 10^-7 T.

To find the amplitude of the magnetic field of an electromagnetic wave, we need to use the relationship between the electric and magnetic fields in an electromagnetic wave.

According to this relationship, the amplitude of the magnetic field is equal to the amplitude of the electric field divided by the speed of light (c). Therefore, if the amplitude of the electric field of an electromagnetic wave is 196 V/m, the amplitude of the magnetic field can be calculated as follows:

Amplitude of magnetic field = Amplitude of electric field / Speed of light
Amplitude of magnetic field = 196 V/m / 3 x 10^8 m/s
Amplitude of magnetic field = 6.53 x 10^-7 T

It is important to note that the amplitude of the magnetic field and the electric field of an electromagnetic wave are perpendicular to each other and are responsible for the wave's propagation through space.

To learn more about : electromagnetic

https://brainly.com/question/13874687

#SPJ11

The Maximum power that can be provided by a diameter laser beam bearing through the air without creating a spark is 0.00169 W.

The electric field strength of a laser beam can be calculated using the formula:

E = c B0 / (2π f r)

E = c B0 / (2π f w0)

Assume  wavelength = 1064 nm

the frequency is:

f = c / λ = [tex]2.998 × 10^8 m/s / (1064 × 10^-9 m)[/tex]

f  = 2.82 × 10^14 Hz

The electric field at the center of the beam is:

E = c B0 / (2π f w0)

E = c B0 √(ln2) / (π f d)

B0 = E (2π f d) / (c √(ln2))

B0 = E (2π f d) / (c √(ln2))

B0 = [tex](3.0 × 10^6 V/m) (2π) (2.82 × 10^14 Hz) (1.2 × 10^-2 m) / (2.998 × 10^8 m/s √(ln2))[/tex]

B0 = 2.13 × 10^-3 T

The maximum power provided by the laser beam is given by the formula:

P = (1/2) ε0 c A E^2

Taking a circular cross-section for the beam, the area is:

A = π (d/2)^2

A =[tex]π (1.2 × 10^-2 m / 2)^2[/tex]

A =  1.13 × 10^-4 m^2

P = (1/2) ε0 c A E^2

P = [tex](1/2) (8.85 × 10^-12 F/m) (2.998 × 10^8 m/s) (1.13 × 10^-4 m^2) (3.0 × 10^6 V/m)^2[/tex]

P =  0.00169 W

Therefore, the highest power that can be delivered by a diameter laser beam propagating through the air without creating a spark is 0.00169 W.

To learn more about Maximum power

https://brainly.com/question/20164130

#SPJ4

The magnitude of the induced electric field in the wire is zero.

To find the magnitude of the induced electric field in the wire, we need to use Faraday's Law of electromagnetic induction, which states that the magnitude of the induced electromotive force (emf) in a closed loop is equal to the rate of change of magnetic flux through the loop.

The magnetic flux through the loop is given by:

Φ = B × A × cosθ

where B is the magnitude of the magnetic field, A is the area of the loop, and θ is the angle between the magnetic field and the normal to the loop.

Since the loop lies in the xz-plane, the angle between the magnetic field and the normal to the loop is 90 degrees, so cosθ = 0.

Therefore, the magnetic flux through the loop is:

Φ = 0

The rate of change of magnetic flux through the loop is then:

dΦ/dt = 0 - 0 = 0

So the induced emf in the loop is:

emf = -dΦ/dt = 0

However, the induced emf is related to the induced electric field by:

emf = ∮E•dl

where ∮E•dl is the line integral of the electric field around the loop.

Since the loop is a circle, we can simplify the line integral to:

∮E•dl = E × 2πr

where r is the radius of the loop.

Therefore, the induced electric field in the wire is:

E = emf / (2πr) = 0 / (2π × 0.00360) = 0

You can learn more about magnitude at: brainly.com/question/30881682

#SPJ11

The caliper cannot accurately measure the diameter of a 1/4 inch hole to the that is nearest 0.0002 in. with its current resolution.

A vernier slide caliper with a resolution of 0.00005 in. has the ability to measure very small distances with high precision. However, when measuring a 1/4 inch hole to the nearest 0.0002 in., the required level of precision is not achievable with this tool. In order to measure to the nearest 0.0002 in., the caliper would need a resolution of at least 0.0001 in. Therefore, the caliper cannot accurately measure the diameter of a 1/4 inch hole to the nearest 0.0002.

To know more about vernier slide caliper, here

brainly.com/question/28224392

#SPJ4

The current in the circuit is 0.698 A.

We can start by finding the reactance of the inductor using the formula:

XL = 2πfL

where XL is the inductive reactance, f is the frequency, and L is the inductance.

XL = 2π(59.9 Hz)(0.639 H) = 240.3 Ω

Since the lamp is a pure resistive load, its resistance is equal to the voltage across it divided by the current flowing through it:

R = V/I

where R is the resistance, V is the voltage, and I is the current.

R = 24.7 V / I

The total impedance of the circuit is given by:

Z = √([tex]R^2[/tex]+ X[tex]L^2)[/tex]

Since the inductor and lamp are connected in series, the current flowing through both is the same, and we can use Ohm's Law to find the current:

I = V/Z

Substituting in the values we have:

Z = √(R^2 + X[tex]L^2[/tex]) = √[(24.7 Ω/I[tex])^2[/tex] + (240.3 Ω[tex])^2[/tex]] = 242.2 Ω

I = V/Z = (169 V)/(242.2 Ω) = 0.698 A

Therefore, the current in the circuit is 0.698 A.

Learn more about Ohm's Law,

https://brainly.com/question/1247379

#SPJ4

The best comment Francesca could make to Leonardo about his music is A. "I get why you like it, but you know it's not real life, right?"

This comment acknowledges Leonardo's interest in the music and doesn't come across as an attack on his taste or his friends. At the same time, it gently challenges the idea that the lyrics represent a desirable or realistic lifestyle.

It's important for Leonardo and his friends to understand that the behavior celebrated in the songs is often illegal or harmful and doesn't lead to long-term success or happiness.

Option B comes across as insulting and judgmental, which may cause Leonardo to become defensive or dismiss Francesca's concerns. Option C is not a helpful comment because it reinforces the idea that criminal behavior is a viable path to success. Option D is not necessarily true, and even if it were, it doesn't address the larger issue of the negative influence the music may have on Leonardo and his friends.

Learn more about music here:https://brainly.com/question/26138624

#SPJ1

A car's velocity changes direction but its magnitude stays constant when it travels around a curve at a steady speed.

For instance, when a car travels at a constant speed, resistive forces like air resistance and friction in the automobile's moving parts balance the driving force from the engine. The net force on the car as a result is zero.

Since the velocity vector's direction is changing, it is reasonable to suppose that an item moving in a circle at a constant speed is accelerating as a result.

To know more about velocity visit:-

https://brainly.com/question/17127206

#SPJ1

The average velocity of the automobile over the entire 4.5-hour interval is 120 km/h.

Explanation: To find the average velocity, we divide the total distance traveled by the total time taken.

In this case, the automobile travels 540 km in 4 hours and 30 minutes. We can convert 30 minutes to 0.5 hours, then add it to 4 hours to get a total time of 4.5 hours.

Average velocity = Total distance ÷ Total time

= 540 km ÷ 4.5 hours

= 120 km/h

Click on this link to know more about how to calculate the average velocity.
https://brainly.com/question/10674649?referrer=searchResults

Faraday's Law of Electromagnetic Induction's Option D describes the magnetic field that runs across a circuit while an EMF is being generated.

The magnetic field through the circuit in which the EMF is being produced is a key factor in Faraday's law of electromagnetic induction, as it directly affects the magnitude of the induced EMF.

Faraday's law of electromagnetic induction states that an electric current will be induced in a circuit when there is a change in the magnetic field through the circuit. This law can be expressed mathematically as:

ε = -dΦ/dt

where ε is the electromotive force (EMF) induced in the circuit, Φ is the magnetic flux through the circuit, and t is time.

The negative sign in the equation indicates that the induced EMF is in the opposite direction to the change in the magnetic flux. Therefore, the rate of change of the magnetic flux through the circuit is directly proportional to the magnitude of the induced EMF.

The magnetic field through the circuit in which the EMF is being produced refers to the magnetic field that is changing in strength or direction. This magnetic field can be generated by a moving magnet, a changing electric current, or any other means that causes a change in the magnetic flux through the circuit.

To learn more about Faraday's law

https://brainly.com/question/13369951

#SPJ4

Complete question:

Which of the following options represents what the magnetic field through the circuit in which the EMF is being produced represents in Faraday's law of electromagnetic induction?

A) The amount of current flowing through the circuit

B) The resistance of the circuit

C) The magnetic field generated by the circuit

D) The magnetic field through the circuit in which the EMF is being produced

The magnetic field strength required to scan the mass range between 16 and 300 for singly charged ions is 0.0398 T.

The magnetic field strength required to focus the ion at a particular mass-to-charge ratio is given by the equation:

B = (V × r) ÷ (B² × 2 × (mB ÷ q))

where V is the accelerating voltage, r is the radius of the magnetic sector, B is the magnetic field strength, m is the mass of the ion, and q is its charge.

Since we are dealing with singly charged ions, q = 1. We know the values of V₁ and B₁ for CH⁴⁺ ions. Therefore, we can use the above equation to find the radius r of the magnetic sector:

r = (V₁ × m) / (B₁² × 2 × q)

We can now use this value of r and the above equation to find the magnetic field strength B₂ required to scan the mass range between 16 and 300:

B₂ = The atomic mass of CH₄ is 16 u.

The ions with mass-to-charge ratio of 16 and 300 have masses of 16 u/q and 300 u/q, respectively.

For singly charged ions, we have

m ÷ q = mass ÷ charge = mass.

B₂ = √((V₁ × 16 u) ÷ (2 × r)) ÷ 1.00 + √((V₁ × 300 u) ÷ (2 × r)) ÷ 1.00

√((V₁ × m) ÷ (2 × q × r))

V₁ = 3.00 x 10³ V, B₁ = 0.126 T

Using the above equations, we can calculate the value of r:

r = (V₁ × m) / (B₁² × 2 × q)

= (3.00 x 10³ V × 16 u) / (0.126 T)² × 2 × 1

= 3.08 x 10⁻³ m

Substituting the values of r and V₁ in the equation for B:

B₂ = √((V₁ × 16 u) ÷ (2 × r)) ÷ 1.00 + √((V₁ × 300 u) ÷ (2 × r)) ÷ 1.00

B₂ = √((3.00 x 10³ V × 16 u) ÷ (2 × 3.08 x 10⁻³ m)) ÷ 1.00 + √((3.00 x 10³ V × 300 u) / (2 × 3.08 x 10⁻³ m)) ÷ 1.00

B₂ = 0.0398 T

To learn more about magnetic follow the link:

https://brainly.com/question/13026686

#SPJ4

The complete question is:

When a magnetic sector mass spectrometer was operated with an initial accelerating voltage (V1) of 3.00 x 103 V, a magnetic field (B1) of 0.126 T was required to focus the CH4 + ion on the detector.

What magnetic field strength would be required to scan the mass range between 16 and 250 for singly charged ions if the accelerating voltage is held constant?

Protons have a positive charge, neutrons have no charge, and electrons have a negative charge.

The three fundamental particles in an atom are protons, neutrons, and electrons. Protons have a positive charge and are located in the nucleus of the atom, along with neutrons, which have no charge. Electrons have a negative charge and orbit the nucleus. The number of protons in an atom determines its atomic number, which in turn determines the element to which it belongs.

The number of electrons in an atom determines its chemical properties, as they are involved in chemical bonding with other atoms. The charges of the particles are important in determining the behavior of atoms in chemical reactions and in the formation of molecules and compounds.

To know more about charge, here

brainly.com/question/3412043

#SPJ4

--The complete question is, Which fundamental particles have positive charges, and which have negative charges?--

The reason we do not see the lines of hydrogen in the spectra of the hottest stars is due to the ionization of hydrogen atoms at high temperatures.

In these stars, the temperatures are so high that the electrons in the hydrogen atoms are stripped away, leaving behind only the protons. This ionized hydrogen does not produce the same spectral lines as neutral hydrogen, which is what we typically observe in cooler stars. Instead, the spectra of hot stars are dominated by lines from ionized metals, such as helium, carbon, and oxygen. So while hydrogen is indeed the most common element in the universe, its presence in the spectra of hot stars is not as prominent due to ionization.

More on hydrogen: https://brainly.com/question/30077093

#SPJ11

The velocity at which the peak voltage of the generator is 475 V is 95.0 revolutions per minute.

The peak voltage (V) of a generator is given by the equation V = NBAω, where N is the number of turns in the coil, B is the magnetic field strength, A is the area of the coil, and ω is the angular velocity of the coil.

We are given that the coil has 475 turns, a diameter of 8.00 cm, and rotates in a 0.250 T field. We can use these values to find the area of the coil:

radius = diameter/2 = 4.00 cm

[tex]area = π(radius)^2 = 50.27 cm^2[/tex]

Now we can solve for ω:

V = NBAω

[tex]ω = V/(NBA) = (475 V)/(475 turns)(0.250 T)(50.27 cm^2)(1 m^2/10,000 cm^2)(1 rev/2π radians)[/tex]

ω = 95.0 rev/min

Therefore, the velocity at which the peak voltage of the generator is 475 V is 95.0 revolutions per minute.

Learn more about The velocity

https://brainly.com/question/17127206

#SPJ4

1260 RPM. RPM = (Peak Voltage / (2 * pi * coil diameter * magnetic field strength)) * 60 can be used to compute this.

The formula Vp = NABw/2, where N is the number of turns in the coil, A is the coil's area, B is the strength of the magnetic field, and w is the coil's angular velocity, determines the peak voltage produced by a revolving coil. We arrive at w = 2Vp/(NAB) after solving for w. Since the coil diameter rather than the area is provided, we can apply the calculation A = pi*d2/4 to determine the area. After simplifying and substituting the given variables, we get at w = 2 * 475 / (475 * pi * 0.082 * 0.25) = 420 rad/s. Finally, we increase this by 60 / (2 * pi), which gives us 1260 RPM.

learn more about coil here:

https://brainly.com/question/27961451

#SPJ11

This statement is incorrect. The correct form of solid waste recycling in which the energy value of combustible waste materials is recovered is called "waste-to-energy" or "energy recovery."

Composting is a different form of solid waste recycling that involves the biological decomposition of organic materials to create a nutrient-rich soil amendment.

Here is a step-by-step explanation of the correct process:

Waste-to-energy (WTE) facilities receive solid waste, typically municipal solid waste, which is then sorted to remove recyclable materials such as plastics, metals, and paper.

The remaining waste is then burned in a specially designed furnace, called an incinerator, at high temperatures to create steam.

The steam drives turbines, which generate electricity that can be sold to the grid.

In addition to electricity generation, WTE facilities also recover the heat generated by the incineration process to provide heat to nearby buildings or industries.

The remaining ash from the incineration process can be used as a construction material, such as for roadbeds or building foundations.

WTE facilities are highly regulated and must meet strict emissions standards to ensure that the air and water quality in surrounding communities is not negatively impacted.

Overall, WTE is a form of solid waste recycling that can provide both energy generation and waste reduction benefits, while also reducing the need for landfill space.

Composting, on the other hand, is a separate process that involves the natural decomposition of organic waste materials to create a valuable soil amendment for use in agriculture and landscaping.

To know more about combustible waste :

https://brainly.com/question/8242764

#SPJ11

The force applied on the crate is found to be 294.3 N. So the work done on the crate to move it 12.8 m horizontally will be 3767.04 J.

The net force acting on the crate will be =  Force applied externally - μmg

Here μmg is the frictional force.

As the acceleration is 0, net force will be 0

So, Force applied = μmg

Here μ = 0.400 ,  m = 75.0 kg,   g = 9.81 m/s²

F = 0.400 × 75.0 × 9.81 = 294.3 N

Work done is found by the equation, W = F.S

F is the force and S is the displacement.

W = 294.3 × 12.8 = 3767.04 J

So the total work done on the crate to move it over a distance of 12.8 m will be 3767.04 J.

For more information regarding frictional force, kindly refer

https://brainly.com/question/17853415

#SPJ4

Tension is treated differently than other forces. The correct statement is: 4.

Tension is a force that occurs in an object when it is pulled from opposite ends. It is unique because it is an internal force that operates within the object, creating a balancing act between the forces being applied. When tension is present, the object experiences an equal and opposite force on both sides, striving to maintain equilibrium. In contrast, other forces, such as pushing or pulling an object, are external forces acting on the object from the outside. Tension plays a crucial role in various scenarios, such as in the stability of structures, mechanics of ropes and cables, and even in the functioning of muscles and tendons in the human body. Understanding and accounting for tension is essential in engineering, physics, and biomechanics. Option 4 is correct.

To know more about external forces, here

brainly.com/question/33589129

#SPJ2

The volume of the displaced water is 0.06 m^3. This is obtained by dividing the weight of the object in the air by the difference between the weight in the air and the weight in water, which gives the volume of water displaced.

To find the volume of the displaced water when an individual with a weight of 700 N in the air has an apparent weight of 40 N when submerged you need to follow these steps:

1. Calculate the loss of weight due to buoyancy. The loss of weight is the difference between the actual weight and the apparent weight:
Loss of weight = Actual weight - Apparent weight
Loss of weight = 700 N - 40 N = 660 N

2. Apply Archimedes' principle. The loss of weight is equal to the weight of the water displaced by the submerged individual:
Weight of displaced water = Loss of weight
Weight of displaced water = 660 N

3. Calculate the volume of the displaced water. To do this, you need to use the formula:
The volume of displaced water = Weight of displaced water / Density of water × Gravity
Since the density of water is approximately 1000 kg/m³, and the acceleration due to gravity is about 9.81 m/s²:
Volume of displaced water = 660 N / (1000 kg/m³ × 9.81 m/s²)
The volume of displaced water ≈ 0.0673 m³

So, the volume of the displaced water is approximately 0.0673 cubic meters.

To learn more about displaced water please visit:

https://brainly.com/question/15706301

#SPJ11

The amount of water that was displaced is 0.66 m3.

A weight in water is determined by subtracting the object's weight in air from the weight of the water it moves.

Given that the object's weight in air is 700 N, the weight of the water that was displaced must be 700 N – 40 = 660 N.

Given that water has a density of 1000 kg/m3, its mass is 660/9.81, or 67.25 kg, and that its weight is equal to its mass times the acceleration caused by gravity.

67.25/1000 = 0.06625 m3 or roughly 0.66 m3 is the volume of the displaced water, which is equal to the mass of the displaced water divided by its density.

learn more about displaced water here:

https://brainly.com/question/15706301

#SPJ11

The negative sign denotes a force that is acting in the opposite direction to the football's motion, which is in the direction of the receiver. Therefore, 375 N is the average force applied to the receiver.

When the football is rolling or sliding during a play, frictional forces are working against it. The reason behind this is that as these balls roll across the ground, surface friction creates an opposing force that significantly slows the ball down.

a) The impulse delivered to the ball can be calculated using the impulse-momentum theorem, which states that the impulse delivered to an object is equal to its change in momentum.

The initial momentum of the football is given by:

p1 = mv1 = (0.500 kg)(15.0 m/s) = 7.50 kg*m/s

The final momentum of the football is zero, since it comes to rest. Therefore, the change in momentum is:

Δp = p2 - p1 = -p1

The impulse delivered to the ball is equal to the change in momentum, so:

J = Δp = -p1 = -(7.50 kgm/s) = -7.50 Ns

b) The average force exerted on the receiver can be calculated using the impulse-momentum theorem again, which states that the impulse delivered to an object is equal to the average force exerted on the object multiplied by the time interval over which the force is applied.

J = F_avg * Δt

Rearranging this equation gives

F_avg = J/Δt = (-7.50 N*s)/(0.020 s) = -375 N

To know more about force visit:-

https://brainly.com/question/13191643

#SPJ1

In the heat transfer relation for a heat exchanger, the quantity f is called the "effectiveness." It represents the ratio of the actual heat transfer rate in the heat exchanger to the maximum possible heat transfer rate under the given conditions.

The quantity f in the heat transfer relation for a heat exchanger is called the heat transfer coefficient correction factor. It represents the ratio of the actual heat transfer coefficient to the theoretical heat transfer coefficient. It takes into account the effects of fluid properties, flow conditions, and heat exchanger geometry on the heat transfer process.

Yes, f can be greater than 1. This occurs when the actual heat transfer coefficient is higher than the theoretical heat transfer coefficient, which can happen when there are enhancements to the heat transfer surface or when the fluid flow is optimized.

To know more about heat transfer coefficient correction factor:
https://brainly.com/question/30981087

#SPJ11

There is evidence to suggest that Mars may have been more Earth-like in the past because of the presence of water on its surface.

The presence of water is a key component in the search for life, as it is essential for the development and sustenance of life as we know it. The discovery of potential past habitable environments on Mars suggests that there may have been conditions suitable for the development of life.

Additionally, Mars has a similar geological history to Earth, with evidence of plate tectonics, volcanic activity, and other geological processes. This suggests that the planet may have had a similar composition and structure to Earth in its early history.

Learn more about water on its surface.

https://brainly.com/question/11346680

#SPJ4

The statement "Stars vary greatly in temperature" (option A) is true about stars.

Stars are massive, luminous spheres of plasma held together by their own gravity. They are the fundamental building blocks of the universe and are responsible for the creation of all heavy elements and the energy that powers all life on Earth.

Stars can have a wide range of temperatures, from as low as 2,000 Kelvin (K) for cooler red dwarfs to over 30,000 K for hotter blue giants. The temperature of a star is closely related to its color, with cooler stars appearing reddish in color and hotter stars appearing bluish in color.

Learn about stars here https://brainly.com/question/31378639

#SPJ1

Complete question:

Which of the following statements about stars is true?

A. Stars vary greatly in temperature.

B. Stars rarely differ in temperature.

C. All stars are the same temperature.

D. none of these

The angle that the beam of light makes with the normal inside the water is approximately 22.7º.

To determine the angle at which the beam of light reflects from the wall into the water, we can use the laws of reflection and refraction.

Let's denote the angle of incidence of the unpolarized sunlight beam with respect to the normal to the plastic wall as θ. The angle of reflection from the wall can be assumed to be equal to θ as per the law of reflection.

When the reflected light enters the water, it undergoes refraction. The angle of refraction, denoted as θ', can be determined using Snell's law:

n1 * sin(θ) = n2 * sin(θ')

Where:

n1 is the refractive index of the plastic wall

n2 is the refractive index of water (approximately 1.33)

Rearranging the equation to solve for sin(θ'):

sin(θ') = (n1 / n2) * sin(θ)

We know that the reflected light is completely polarized, which means it is perpendicular to the reflected surface. In other words, the angle of reflection equals 90º (or π/2 radians). Hence, we have:

θ + θ' = 90º (or π/2 radians)

Solving for θ':

θ' = 90º - θ (or π/2 - θ radians)

Substituting the value of sin(θ') from Snell's law:

sin(90º - θ) = (n1 / n2) * sin(θ)

Applying the trigonometric identity sin(90º - θ) = cos(θ):

cos(θ) = (n1 / n2) * sin(θ)

Rearranging the equation to solve for θ:

cos(θ) / sin(θ) = (n1 / n2)

Using the trigonometric identity cos(θ) / sin(θ) = cot(θ):

cot(θ) = (n1 / n2)

Taking the inverse cotangent (or arccot) of both sides to solve for θ:

θ = arccot(n1 / n2)

Substituting the given refractive indices:

θ = arccot(1.65 / 1.33)

Calculating this expression gives an angle of approximately 22.7º.

Therefore, the angle that the beam of light makes with the normal inside the water is approximately 22.7º.

Know more about polarized:

https://brainly.com/question/29217577

#SPJ12

The distance between the fringes will be greater for yellow light. It's because yellow light has a longer wavelength than green light.

The distance between the fringes in an interference pattern is determined by the wavelength of the light used. Yellow light has a longer wavelength than green light, so the distance between the fringes will be greater when using yellow light. This is because the distance between the fringes is directly proportional to the wavelength of the light used in the experiment. Therefore, if the wavelength of the light is longer, the distance between the fringes will also be longer.

Learn more about wavelength: https://brainly.com/question/10750459

#SPJ11

The acceleration of the plane is: -55,090 km/(hour)²

What is an acceleration?

The initial velocity of the plane (758 km/sec) is much greater than the maximum possible speed of an airplane. It is possible that the initial velocity was meant to be 758 km/hour instead.

Assuming that the initial velocity was meant to be 758 km/hour and final velocity is 30 km/hour, the acceleration of the plane can be calculated using the formula:

acceleration = (final velocity - initial velocity) / time

Here, final velocity = 30 km/hour, initial velocity = 758 km/hour, and time = 48 seconds converted to hours is 48/3600 = 0.01333 hours.

Therefore, the acceleration of the plane is:

acceleration = (30 - 758) / 0.01333

acceleration = -55,090 km/(hour)²

The negative sign indicates that the plane is decelerating or slowing down. However, this answer seems unlikely as the acceleration is very high and may not be possible for an airplane to achieve. It is possible that the initial velocity was meant to be a lower value.

What is velocity?

Velocity is a physical quantity that describes the rate of change of an object's position with respect to time. It is a vector quantity, meaning it has both magnitude (speed) and direction.

In other words, velocity is the speed of an object in a particular direction. For example, a car moving at 60 km/hour to the east has a velocity of 60 km/hour to the east.

Velocity can be calculated as the change in position divided by the change in time:

velocity = change in position / change in time

The standard unit of velocity is meters per second (m/s) in the SI system, but it can also be expressed in other units such as kilometers per hour (km/hour) or miles per hour (mph).

To know more about velocity, visit:

https://brainly.com/question/2777725

#SPJ1

Complete question is: A plane lands on the runway and slows from 758 km/sec to 30 km/sec in 48 seconds, The acceleration of the plane is: -55,090 km/(hour)².

In our present state of technology, we don't have anything similar to the alien spacecraft's protective shielding. It's not a realistic representation of current technology.

The scene in which F-18 fighter jets shoot missiles at an alien spacecraft, only to have them explode before hitting the target, is certainly possible in a sci-fi movie.

However, The closest technology we have is electromagnetic shields used in science experiments and particle accelerators. These shields use a magnetic field to protect against charged particles, but they're not strong enough to withstand the impact of a missile.

Additionally, electromagnetic shields require a massive amount of energy, which isn't practical for use in military applications. Overall, while the scene may be entertaining in a movie,

To learn more about : spacecraft's

https://brainly.com/question/29727760

#SPJ11

Please note that without the specific energy value of the photons in question, it is not possible to give a definitive answer to the number of photons needed.

To determine how many photons need to be absorbed simultaneously by a molecule with a binding energy of 10.0 electron volts (eV) to break it apart, you must first know the energy of each individual photon.

The energy of a photon can be calculated using the formula E = hf, where E is the energy, h is Planck's constant (6.63 x 10^-34 Js), and f is the frequency of the photon.

Once you have calculated the energy of a single photon, you can determine how many photons are required to reach the 10.0 eV binding energy by dividing the binding energy by the energy of one photon.

For example, if the energy of a single photon is 2.0 eV, then you would need 5 photons (10.0 eV / 2.0 eV) to be absorbed simultaneously to break the molecule apart.

To learn more about : photons

https://brainly.com/question/30130156

#SPJ11

The new resistance of the wire is 4/π times the initial resistance.

The resistance of a wire is given by the equation R = ρL/A, where R is the resistance, ρ is the resistivity of the material, L is the length of the wire, and A is the cross-sectional area of the wire.

In this case, we know that the wire has an initial length of l0 and a radius of r0, and a measured resistance of 1.0. We also know that the wire is drawn under tensile stress to a new uniform radius of 0.25r0.

The cross-sectional area of the wire after it is drawn is given by A' = π(0.25r₀)² = 0.0625πr₀²

The length of the wire does not change, so we can use the equation R = ρL/A to find the new resistance.

R' = ρL/A' = ρL/(0.0625πr₀² )

To find the new resistance, we need to know the resistivity of the material. If we assume that the resistivity is constant and does not change when the wire is drawn, then we can use the same value of ρ as before. If we do not have this information, we cannot calculate the new resistance.

Assuming a constant resistivity, the new resistance is:

R' = 1.0/(0.0625π) × r₀²/I₀

R' = 4/π ×  r₀²/I₀

You can learn more about resistance at: brainly.com/question/29427458

#SPJ11

The total angle the tires rotate through during the 2.28 km trip is approximately 8602 radians.

To find the total angle (in radians) the tires rotate through during a 2.28 km trip with wheels having a radius of 26.5 cm, follow these steps:

1. Convert the distance to meters:

2.28 km = 2280 meters.

2. Convert the wheel radius to meters:

26.5 cm = 0.265 meters.

3. Calculate the circumference of the wheel using the formula C = 2πr, where C is the circumference and r is the radius:

C = 2π(0.265 m) ≈ 1.665 meters.

4. Determine the number of wheel rotations by dividing the total distance by the circumference:

2280 meters / 1.665 meters ≈ 1369 rotations.

5. Calculate the total angle in radians by multiplying the number of rotations by 2π radians (1 full rotation):

1369 rotations × 2π radians ≈ 8602 radians.

Learn more about angle:

https://brainly.com/question/25716982

#SPJ11