A cylindrical specimen of some metal alloy 10 mm in diameter and 150 mm long has a modulus of elasticity of 100 GPa. Does it seem reasonable to expect a tensile stress of 200 MPa to produce a reduction in specimen diameter of 0.08 mm

Answer:

N0

Explanation:

It does not seem reasonable to expect a tensile stress of 200 MPa to produce a reduction in specimen diameter of 0.08 mm

Given data :

Diameter ( d ) = 10 mm

length ( l ) = 150 mm

elasticity ( ∈ ) = 100 GPa

longitudinal strain ( б ) 200 MPa

Poisson ratio ( μ )  ( assumed ) =0.3

Assumption : deformation totally elastic

attached below is the detailed solution to why it is not reasonable .

The Sd value = 0.08 > the calculated Sd value ( 6*10^-3 ) hence it is not reasonable to expect a tensile stress of 200 MPa to produce a reduction in specimen

What's the ampacity of a No. 10 type TW copper Wire in a raceway containing six wires and located in an area where the ambient Temperature is 50 C

A. 15.1 A
B. 8.6 A
C. 13.9 A
D. 10.8 A

Determine the convection heat transfer coefficient, thermal resistance for convection, and the convection heat transfer rate that are associated with air at atmospheric pressure in cross flow over a cylinder of diameter D = 100 mm and length L = 2 m. The cylinder temperature is Ts = ° 70 C while the air velocity and temperature are V = 3 m/s and T[infinity] = 20°C, respectively. Plot the convection heat transfer coefficient and the heat transfer rate from the cylinder over the range 0.05 m ≤ D ≤ 0.5 m.