A key difference between notes payable and accounts payable is that: each note payable is supported by a legal document describing details about the company's promise to repay a loan, but accounts payable usually don't have this type of documentation.
Notes payable typically involve formal agreements, like promissory notes, which detail the terms of repayment, including interest rates and due dates. They are often used for larger, longer-term loans or borrowings from financial institutions.
On the other hand, accounts payable represent short-term liabilities that a company owes to its suppliers or creditors for goods and services purchased on credit. These liabilities usually don't have formal legal documentation like notes payable, as they are often based on standard trade credit terms and agreements.
In summary, the main difference between notes payable and accounts payable is the presence of a legal document in the case of notes payable, whereas accounts payable typically do not have such documentation.
To know more about legal document, refer here:
https://brainly.com/question/29108865#
#SPJ11
Complete question:
A difference between notes payable and accounts payable is that:
a. accounts payable are usually outstanding for longer periods of time than notes payable.
b. accounts payable have an interest component but notes payable do not.
c. notes payable are usually for smaller amounts than accounts payable.
d. each note payable is supported by a legal document describing details about the company's promise to repay a loan, but accounts payable usually don't have this type of documentation.
the seller of personal watercraft put an ad for sale in the paper. a customer saw the ad and told her that he wanted to buy the watercraft but had to arrange for financing. the seller suggested that they write a contract for sale then and there so that they would not have to waste any time while he got his financing. in the meantime, the parties also orally agreed to a financing contract, under which the seller would make a loan at 1% interest, which the buyer would pay off in installments and use the money to buy the boat. the next day, when the buyer came to pick up the boat, the seller had changed their mind about the financing contract and refused to provide the loan, but insisted that the buyer still had to pay for the boat. the buyer refused stating that he could not buy the boat without financing. the seller sues the buyer for breach. the buyer seeks to defend himself by arguing that his failure to buy the boat was due to the sellers own breach by refusing to provide the financing loan. can the buyer introduce evidence of the financing contract to explain his breach?
Yes, the buyer can introduce evidence of the oral financing contract to explain his breach.
How can the buyers introduce evidence of the financing contractThe buyer's defense is based on the seller's breach of their oral agreement, which was to provide a loan at 1% interest, payable in installments.
By refusing to provide the loan, the seller failed to fulfill their part of the agreement, thus causing the buyer's inability to purchase the watercraft.
Introducing evidence of this oral financing contract can help the buyer establish that their breach was a result of the seller's own breach, potentially relieving them of liability for not purchasing the watercraft.
Learn more about financing contract at
https://brainly.com/question/7873500
#SPJ11
Please calculate WACC given corporate tax rate of 25%. Market risk premium is 8% and risk-free rate is 2%. Debt 20.000 debt contracts were issued, at 10% coupon rate, 25 years to maturity, selling for 120% of par. (Assuming bond is semi-annually compounding) Common stock 500,000 shares outstanding, selling for $88 per share, beta is 1.5. Preferred stock 150,000 shares outstanding, $10 is dividend and 10% of flotation cost. It is selling for $98 per share.
The WACC is calculated to be 11.7%.
The weighted average cost of capital (WACC) can be calculated by taking the cost of the debt and the cost of the equity and weighting them according to the proportion of debt and equity in the capital structure.
The cost of debt is 10%, calculated by taking the coupon rate of 10% and adjusting for the present value of the bond at 120% of par (semiannual compounding).
The cost of equity is 13.3%, calculated by taking the market risk premium of 8%, adding the risk-free rate of 2%, and multiplying by the beta of 1.5. When the cost of debt and the cost of equity are weighted by their respective proportions in the capital structure, the WACC is calculated to be 11.7%.
This is calculated by taking 20,000 debt contracts (weighted by 17.6%) multiplied by the cost of debt of 10%, added to 500,000 shares of common stock weighted by 71.9% multiplied by the cost of equity of 13.3%, and added to the 150,000 shares of preferred stock weighted by 10.5% multiplied by the cost of equity of 13.3%.
Know more about weighted average cost of capital here
https://brainly.com/question/28561354#
#SPJ11
Q4 - A family has established a trust fund for its children, attending college, and has paid $101.514 to a bank. In return, the bak is going to pay the family $20,000 every year for the next 6 years. The first payment will be made 1 year from the day the family paid the bank. What is the interest rate that thic trust fund will be earning?
The trust fund is earning an interest rate of 5%.
Calculate the the interest rate earned by the trust fund?To solve for the interest rate earned by the trust fund, we can use the present value formula:
PV = PMT x (1 - 1/(1+r)^n) / r
Where PV is the present value of the payments, PMT is the payment amount, r is the interest rate, and n is the number of payment periods.
In this case, we know that the family paid $101,514 upfront and will receive $20,000 per year for 6 years, with the first payment made 1 year after the initial payment. Therefore, PMT = $20,000, n = 6, and the time period is 5 years.
We can rearrange the formula to solve for r:
r = (PMT / ((PV x r) + PMT)) x (1 - 1/(1+r)^n)
We can start by assuming an interest rate and then use the formula to calculate the present value of the payments. We can then compare this value to the initial payment of $101,514 to see if the assumed interest rate is too high or too low.
Let's assume an interest rate of 4%. Plugging in the values, we get:
PV = $20,000 x (1 - 1/(1+0.04)^6) / 0.04 = $98,619.56
Since $98,619.56 is less than the initial payment of $101,514, we know that the interest rate must be higher than 4%. Let's try an interest rate of 5%:
PV = $20,000 x (1 - 1/(1+0.05)^6) / 0.05 = $101,150.70
Since $101,150.70 is very close to the initial payment of $101,514, we know that the interest rate is approximately 5%. Therefore, the trust fund is earning an interest rate of 5%.
Learn more about trust fund
brainly.com/question/30979602
#SPJ11
distinguish between common-law liability and statutory liability for auditors. what is the basis for the difference in liability?
A Liability is defined as a unborn loss of profitable benefits that an reality is needed to give to another reality as a result of once deals or other once events.
Common law liability arises from the legal opinions of judges in deciding a case, a precedent that serves as a companion for other judges to decide future analogous cases and is used in civil action.
On the other hand, legal liability reflects laws legislated at the state or civil position and prescribes certain procedures.
May involve civil or felonious liability. Liability is an obligation or liability to another that's extinguished by the unborn transfer or use of goods, the provision of services or any other profitable sale at a specific or determinable time, upon the circumstance of a specific event or on demand.
To know more about Liability,
brainly.com/question/28391469
#SPJ4
what are the sources of demand in an mrp system? are these dependent or independent, and how are they used as inputs to the system?
In a material requirements planning (MRP) system, the sources of demand are the orders placed by customers or the forecasts of future demand. These sources of demand are used to calculate the quantity and timing of the materials needed to produce finished goods.
The sources of demand in an MRP system can be categorized into two types: dependent and independent demand.
Independent demand: This refers to the demand for finished goods or end products, which is typically uncertain and difficult to forecast. Independent demand arises from the customer orders or market forecasts for finished goods. Independent demand is not related to the demand for other components or subassemblies within the production process.
Dependent demand: This refers to the demand for components, raw materials, and subassemblies that are needed to produce finished goods. Dependent demand is calculated based on the demand for finished goods and the bills of materials (BOM) that specify the quantities of each component required to produce a finished product. Dependent demand is directly related to the production schedule and inventory levels of the finished goods.
Both independent and dependent demands are used as inputs to the MRP system to determine the timing and quantity of materials required to meet the production schedule. The MRP system uses these demands to generate a production plan and a materials procurement plan that specifies the quantity and timing of the materials needed to fulfill the production schedule. The MRP system also considers inventory levels and lead times for each material to ensure that the required materials are available when needed. By balancing the supply of materials with the demand for finished goods, the MRP system helps to optimize the production process and ensure that the required materials are available to meet customer demand.
Learn more about dependent here:
https://brainly.com/question/27822778
#SPJ11
The sources of demand in an MRP (Material Requirements Planning) system are primarily two types:
1. Dependent demand: This refers to the demand for components, parts, or subassemblies that are required to manufacture or assemble a finished product. Dependent demand is derived from the production schedule for the finished product, and it is calculated based on the bill of materials (BOM) for the finished product. The BOM specifies the quantity and type of materials required to manufacture each finished product unit. Dependent demand is a derived demand because it is dependent on the demand for the finished product.
2. Independent demand: This refers to the demand for finished products that are sold to customers or used for inventory replenishment. Independent demand is not derived from any other demand and is usually unpredictable. It is based on market demand, customer orders, or forecasts.
Both dependent and independent demands are used as inputs to the MRP system to calculate the materials, components, and subassemblies required to fulfill the production schedule for the finished product. The MRP system uses the BOM and the production schedule to calculate the quantity and timing of each component required to produce the finished product. The MRP system also considers inventory levels, lead times, and supplier schedules to ensure that the necessary materials and components are available when required for production. The system generates purchase orders or work orders to initiate the procurement and production of the required materials and components.
Click the below link, to learn more about Material Requirements Planning:
https://brainly.com/question/29431904
#SPJ11
Systematically thinking about the benefits associated with the consumption of goods and services can:
Multiple choice question.
ensure market equilibrium.
reduce the need for regulation.
eliminate shortages and surpluses.
help consumers make better decisions.
Systematically thinking about the benefits associated with the consumption of goods and services can "help consumers make better decisions."
Systematically thinking about the benefits associated with the consumption of goods and services can help consumers make better decisions. By understanding the benefits that a product or service provides, consumers can make informed choices about whether or not to purchase it.
This can lead to more efficient markets as consumers are more likely to only purchase goods and services that provide them with the most value. However, this alone cannot ensure market equilibrium, reduce the need for regulation, or eliminate shortages and surpluses.
Learn more about market equilibrium :
https://brainly.com/question/30692864
#SPJ4
Systematically thinking about the benefits associated with the consumption of goods and services can "help consumers make better decisions." Systematically thinking about the benefits associated .
the consumption of goods and services can help consumers make better decisions. By understanding the benefits that a product or service provides, consumers can make informed choices about whether or not to purchase it. This can lead to more efficient markets as consumers are more likely to only purchase goods and services that provide them with the most value. However, this alone cannot ensure market equilibrium, reduce the need for regulation, or eliminate shortages and surpluses.
Learn more about market here:
brainly.com/question/30692864
#SPJ11
T/F: A Unique Identifier has a NULL value for each instance of the entity for the lifetime of the instance.
The statement "A Unique Identifier has a NULL value for each instance of the entity for the lifetime of the instance" is false because each entity instance can be precisely identified using its Unique Identifier
A Unique Identifier is a value assigned to an instance of an entity that distinguishes it from all other instances in the system. This is important for maintaining consistency and preventing ambiguity, as each entity instance can be precisely identified using its Unique Identifier.
Having a NULL value for each instance of the entity would contradict the purpose of a Unique Identifier. A NULL value indicates the absence of a value or an unknown value, which means it cannot uniquely identify an instance.
In fact, the Unique Identifier should always have a non-NULL value to serve its purpose of uniquely identifying an instance for its entire lifetime.
Furthermore, Unique Identifiers are often enforced through primary keys in databases, which automatically ensure that there are no NULL values or duplicate values for the field serving as the primary key.
In summary, the statement is false because Unique Identifiers must have non-NULL values to effectively and consistently distinguish between different instances of an entity throughout their lifetimes.
To know more about entity, refer here:
https://brainly.com/question/13437425#
#SPJ11
the loanable funds market in an economy is in equilibrium. draw a correctly labeled graph of the loanable funds market, labeling the equilibrium real interest rate and the equilibrium quantity. show the impact of a decrease in the money supply for this economy in your graph from part (a). will the result be a shortage or surplus in the loanable funds market at the original equilibrium? will lenders of existing fixed-rate loans be better or worse off as a result of the change in the real interest rate? how will investment spending on facilities and equipment in this economy be impacted? explain.
The loanable funds market is where savers provide funds for borrowers to use for investment purposes.
What's loanable fundsIn equilibrium, the quantity of loanable funds supplied equals the quantity demanded. This is represented by a graph with the real interest rate on the y-axis and the quantity of loanable funds on the x-axis. The supply and demand curves intersect at the equilibrium real interest rate and equilibrium quantity.
A decrease in the money supply shifts the supply curve for loanable funds to the left, as there are fewer funds available for lending. This leads to a higher real interest rate and a lower quantity of loanable funds at the new equilibrium point.
At the original equilibrium, there is now a shortage of loanable funds, as the quantity demanded exceeds the quantity supplied. Lenders of existing fixed-rate loans are worse off, as the real interest rate increases, reducing the value of their existing loans.
Investment spending on facilities and equipment is negatively impacted, as the higher real interest rate discourages borrowing and investment due to increased borrowing costs. This may lead to reduced economic growth in the long run.
Learn more about loanable funds at
https://brainly.com/question/29453063
#SPJ11
jill smithers, operations manager, takes measurements at various points in the transformation process of producing her company's organic baby food products. this is also known as
Jill Smithers is using a process known as process monitoring or process control to gather data and ensure quality control throughout the transformation process of producing her company's organic baby food products.
As the operations manager, it is her responsibility to measure and analyze various points in the process to identify areas for improvement and ensure that the end product meets the company's standards.Jill Smithers, as the Operations Manager, is performing a process known as "process monitoring" or "quality control" in the transformation process of producing her company's organic baby food products. This involves taking measurements at various points to ensure that the products meet the required standards and specifications.
For more such questions on data
https://brainly.com/question/29987008
#SPJ11
in how many ways can seven different jobs be assigned to four different employees so that each employee is as- signed at least one job and the most difficult job is as- signed to the best employee?
There are 540 ways to assign the seven different jobs to four different employees, ensuring each employee gets at least one job and the most difficult job is assigned to the best employee.
To find the number of ways seven different jobs can be assigned to four different employees, ensuring that each employee gets at least one job and the most difficult job is assigned to the best employee, we can use combinatorics.
First, let's assign the most difficult job to the best employee, which leaves six jobs for the other three employees. Since each employee must be assigned at least one job, we can use the Principle of Inclusion-Exclusion to find the number of ways to distribute the remaining six jobs.
There are [tex]3^{6}[/tex] ways to distribute the six jobs among the three employees without restrictions. However, this includes cases where one or more employees do not receive any jobs. To correct for this, we need to subtract the number of ways in which one or more employees do not get any jobs.
There are 3 ways to exclude one employee and [tex]2^{6}[/tex] ways to distribute the jobs among the remaining two employees. We've counted cases where two employees are excluded twice, so we need to add back the number of ways all six jobs are assigned to one employee (3 ways).
Using the Principle of Inclusion-Exclusion, the number of ways to distribute the remaining six jobs to the three employees is:
[tex]3^{6} -3*(2^{6} )+3[/tex] =
729 - 192 + 3 = 540
Know more about Principle of Inclusion-Exclusion here:
https://brainly.com/question/30995367
#SPJ11
marketing strategies for the business-to-business market multiple choice are concerned with the same types of purchasing influences as those in the consumer market. are basically similar to the consumer market, because business buyers are also consumers. are not concerned with relationship marketing techniques. differ from consumer marketing strategies because business buyers have their own decision-making process.
Marketing strategies for the business-to-business (B2B) market differ from consumer marketing strategies because business buyers have their own unique decision-making process.
What's B2B marketingIn B2B marketing, purchasing decisions are often influenced by factors such as cost efficiency, long-term value, and return on investment.
Additionally, B2B marketing places a strong emphasis on relationship marketing techniques, as maintaining a strong professional relationship with clients is crucial for long-term success and repeat business.
It is important to acknowledge that business buyers are also consumers in their personal lives, but their decision-making processes in a professional capacity are driven by the specific goals and objectives of their organization.
Therefore, B2B marketing strategies must be tailored to address the unique challenges and opportunities present in the business-to-business market.
Learn more about B2B market at
https://brainly.com/question/15506646
#SPJ11
abc bank offers to lend you $50,000 for one year at a quoted annual rate of 8.31% with each payment at the end of each month. def bank also offers to lend you the same amount at a quoted annual rate of 8.63%, with each payment at the end of each quarter. what is the difference in the effective annual rates charged by the two banks? group of answer choices 0.22% 0.24% 0.26% 0.30% 0.28%
The difference in the effective annual rates charged by the two banks is 0.30%.
How to determine the effective annual rate (EAR)To calculate the effective annual rate (EAR) for each bank, we need to consider the compounding frequency.
For ABC Bank, the compounding period is monthly, so we use the formula (1 + r/n)^n - 1, where r is the quoted annual rate and n is the number of compounding periods.
Plugging in the numbers, we get an EAR of 8.573%.
For DEF Bank, the compounding period is quarterly, so we use the same formula with n = 4.
Plugging in the numbers, we get an EAR of 8.870%.
To find the difference in the effective annual rates, we subtract the EAR of ABC Bank from the EAR of DEF Bank:
8.870% - 8.573% = 0.297% or 0.30% (rounded to the nearest hundredth)
Learn more about effective annual rate at
https://brainly.com/question/5442201
#SPJ11
You just won the grand prize in a national writing contest! As your prize, you will receive $2,000 a month for ten years. If you can earn 7 percent on your money, what is this prize worth to you today?
A. $172,252.71
B. $178,411.06
C. $181,338.40
D. $185,333.33
E. $190,450.25
The value of the prize is worth $185,333.33 today. This is because the prize is $2,000 a month for ten years, so it totals $240,000.
When that amount is adjusted for the 7 percent interest rate, it comes to $185,333.33. This amount is calculated by taking the original amount and multiplying it by the present value of an annuity factor.
The factor takes into account the time value of money, which means that money today is worth more than money in the future due to the potential for it to earn interest over time. Therefore, the prize of $240,000 a decade from now is worth less than $240,000 today, when factoring in the 7 percent interest rate.
Know more about annuity factor here
https://brainly.com/question/27894384#
#SPJ11
Jimmy Khan has developed a trading rule where he buys firms with relatively high dividend yields. This trading rule has consistently earned a risk-adjusted return of 15% per month for the past 10 years. This is evidence of:
a) semi-strong form efficiency
b) weak-form inefficiency
c) weak-form efficiency
d) semi-strong form inefficiency
In this case, Khan's trading rule is evidence of weak-form efficiency. Khan has been consistently earning a risk-adjusted return of 15% per month for the past 10 years.
Here, correct option is C.
This suggests that Khan is taking advantage of some kind of pattern or trend in the stock market that is not available to the general public. This indicates that the security prices are not accurately reflecting all publicly available information, suggesting weak-form efficiency.
Semi-strong form efficiency is a market efficiency which suggests that all publicly available information is accurately reflected in a security's price. In other words, all publicly available information about a security is already built into its price. Weak-form efficiency, on the other hand, suggests that past stock prices or historical data cannot be used to predict future stock prices.
Therefore, correct option is C.
know more about trading rule here
https://brainly.com/question/14922544#
#SPJ11
if quanity supplies equals 85 units and the quanity demanded equals 80 units under a price contol then it is a
It is a situation of excess supply, also known as a surplus. In the given scenario, the quantity supplied exceeds the quantity demanded, indicating a surplus in the market.
Surplus or excess supply refers to a situation where the quantity supplied of a good or service exceeds the quantity demanded at a given price. This can occur when there is a price control in place, such as a price ceiling or price floor, or in a free market without any price controls.
In this case, the quantity supplied exceeds the quantity demanded, resulting in an excess of goods in the market. Price controls, such as price ceilings or price floors, are government-imposed policies that can distort the equilibrium price and quantity in a market, leading to imbalances between supply and demand.
To know more about surplus refer here
https://brainly.com/question/30228532#
#SPJ11
An annuity owner calls you, the agent, to request a surrender of an annuity, which was held for less than one year. When you apprise the owner of the surrender charges and potential losses, the owner indicates that the fees and losses do not matter and to please make the surrender immediately and wire the money to an account located in Europe. What should the agent do?
The agent should call the Company compliance officer and await instructions.
Compliance Officers are chargeable for making sure that every one company strategies and processes follow the law. And now no longer simplest the law — a Compliance Officer is likewise chargeable for making sure that agency operations follow inner requirements too. A compliance officer is an character who guarantees that a agency complies with its outdoor regulatory and prison necessities in addition to inner rules and bylaws. Compliance officials have a obligation to their agency to paintings with control and group of workers to perceive and manipulate regulatory risk.
To learn more about compliance officer check the link below-
https://brainly.com/question/28093012
#SPJ4
As an agent, it is important to act in the best interest of the annuity owner and provide them with all necessary information to make an informed decision. However, if the owner insists on proceeding with the surrender, the agent must comply with their request while taking necessary precautions to ensure that the transaction is legitimate and not being used for illegal purposes.
As an agent, the first thing that should be done is to verify the identity of the annuity owner and make sure that the request is legitimate. If the request is legitimate, it is important to inform the annuity owner about the potential losses and surrender charges associated with the annuity surrender. However, if the annuity owner insists on proceeding with the surrender, the agent must comply with their request.In this scenario, it is concerning that the annuity owner wants the money wired to an account in Europe.
This raises red flags and may indicate that the annuity owner is involved in fraudulent activities or trying to evade taxes. The agent must exercise caution and follow proper protocols when wiring the money to ensure that it is not being used for illegal purposes.Furthermore, since the annuity was held for less than one year, it is important to inform the annuity owner about the potential tax implications of the surrender. The owner may face early withdrawal penalties and be subject to income taxes on the gains earned from the annuity.
For more such questions on annuity
https://brainly.com/question/14908942
#SPJ11
The spread of the 5-year bond credit issued by MyBank on risk-free bonds equivalent is equal to 325 bps (calculated as the difference between the zero spot rates).MyBank recovery rate is estimated at40%. Determine the cumulative default probability of MyBank at 5 years.
The probability that MyBank will default within the 5-year period is CDP = 325/40 = 8.125%. The cumulative default probability of MyBank at 5 years can be calculated using a combination of its spread and recovery rate.
The spread of the 5-year bond credit issued by MyBank on risk-free bonds equivalent is equal to 325 bps, which is the difference between the zero spot rates. The recovery rate of MyBank is estimated at 40%.
By combining the spread and recovery rate, the cumulative default probability (CDP) of MyBank at 5 years can be calculated. CDP is equal to the spread over the recovery rate. Therefore, CDP = 325/40 = 8.125%. This is the probability that MyBank will default within the 5-year period.
It is important to note that the higher the spread and the lower the recovery rate, the higher the probability of default. Therefore, MyBank should strive to reduce the spread and increase the recovery rate in order to reduce the probability of default in the 5-year period.
Know more about spread here
https://brainly.com/question/18170471#
#SPJ11
1. a)
Rozanski Co. currently has EBIT of $36,000 and is all equity financed. EBIT are expected to grow at a rate of 3% per year. The firm pays corporate taxes equal to 26% of taxable income. The cost of equity for this firm is 10%.
What is the market value of the firm? Enter your answer rounded to two decimal places.
b)
Rozanski Co. currently has EBIT of $31,000 and is all equity financed. EBIT are expected to grow at a rate of 1% per year. The firm pays corporate taxes equal to 22% of taxable income. The cost of equity for this firm is 16%.
What is the market value of the firm? Enter your answer rounded to two decimal places.
The market values for the two scenarios are:
a) $266,400.00
b) $151,125.00
a) To calculate the market value of the firm, we can use the formula:
Market Value = EBIT x (1 - Tax Rate) / Cost of Equity
For Rozanski Co. in scenario a), we have:
EBIT = $36,000
Tax Rate = 26%
Cost of Equity = 10%
Market Value = $36,000 x (1 - 0.26) / 0.10
Market Value = $36,000 x 0.74 / 0.10
Market Value = $26,640 / 0.10
Market Value = $266,400.00
b) For Rozanski Co. in scenario b), we have:
EBIT = $31,000
Tax Rate = 22%
Cost of Equity = 16%
Market Value = $31,000 x (1 - 0.22) / 0.16
Market Value = $31,000 x 0.78 / 0.16
Market Value = $24,180 / 0.16
Market Value = $151,125.00
So, the market values for the two scenarios are:
a) $266,400.00
b) $151,125.00
To learn more about tax rate, refer below:
https://brainly.com/question/12395856
#SPJ11
Mr. and Mrs. Norton purchased a ski-chalet for $34,500. (This must have been in 1930!) They paid $3,860 down and agreed to make equal payments at the end of every three months for 15 years. Interest is 7.43% compounded quarterly. Do not include the dollar sign, $, in your answers. Do not include the comma usually used to denote thousands. All dollar figures must be exactly 2 decimals. Although the Cash Flow Concept puts a negative sign, "-", in front of many numbers, do not include the negative sign when you put these numbers into Moodle. (a.) What is the size of the payment? Hint: Make sure your calculator is set to 2 decimal places before using AMORT. (b.) What is the balance after the first payment? (C.) How much of the principal is paid in the first payment? (d.) How much interest is paid in the first payment? (e.) What is the balance after the second payment? (f.) How much of the principal is paid in the second payment? (9.) How much interest is paid in the second payment? (h.) How much will they have paid in total after the 15 years? Total paid in payment = Plus the downpayment = (1.) How much interest will they pay in total? Total paid in payments - Original Mortgage =
(a) Using the PMT function in Excel, with a loan amount of $30,640 ($34,500 - $3,860) and a 15-year term with quarterly payments at 7.43% quarterly interest rate, the size of the payment is $552.23.
(b) After the first payment, the balance is the present value of the remaining payments, which can be calculated using the PV function in Excel. With a rate of 7.43%/4, 14*4 = 56 periods remaining, and a payment of $552.23, the balance is $29,428.05.
(c) The amount of principal paid in the first payment can be calculated by subtracting the interest paid from the total payment. The interest paid can be calculated as the balance multiplied by the quarterly interest rate of 7.43%/4. Therefore, the principal paid is $552.23 - ($29,428.05 x 7.43%/4) = $159.16.
(d) The interest paid in the first payment is $552.23 - $159.16 = $393.07.
(e) After the second payment, the remaining balance is the present value of the remaining payments, which can be calculated using the PV function in Excel. With a rate of 7.43%/4, 13*4 = 52 periods remaining, and a payment of $552.23, the balance is $28,198.54.
(f) The amount of principal paid in the second payment can be calculated by subtracting the interest paid from the total payment. The interest paid can be calculated as the balance multiplied by the quarterly interest rate of 7.43%/4. Therefore, the principal paid is $552.23 - ($28,198.54 x 7.43%/4) = $163.79.
(g) The interest paid in the second payment is $552.23 - $163.79 = $388.44.
(h) The total amount paid after 15 years can be calculated as the total number of payments (154) multiplied by the payment amount, plus the down payment of $3,860. Therefore, the total paid is (154)*$552.23 + $3,860 = $105,791.40.
(i) The total interest paid can be calculated as the total amount paid minus the original mortgage amount of $30,640. Therefore, the total interest paid is $105,791.40 - $30,640 = $75,151.40.
Learn more about mortgage
https://brainly.com/question/31147395
#SPJ4
the concept of inherent risk is most closely tied to the idea of _________. a. currency risk b. underlying business risks c. global risk d. audit risk
The concept of inherent risk is most closely tied to the idea of underlying business risks.
Inherent risk refers to the risk that exists in a company's operations and activities before any controls or measures are put in place to mitigate it. These risks can arise from factors such as market conditions, competition, economic trends, and management decisions, all of which are related to the underlying business risks faced by the company. Therefore, inherent risk is a crucial factor in assessing the overall audit risk of a company.
What types of risks fall under "business risk"?Anything that might have an effect on your company's finances is referred to as a business risk. These financial hazards have the potential to bankrupt your business frequently. While there are numerous elements that can result in business risk, a few are as follows: Fire harm. Flooding.
To know more about business risk:
https://brainly.com/question/14540826
#SPJ11
a negative gap between nearly always points to management and employees simply not getting the job done. this could be due to vague performance standards, poor training, or ineffective monitoring by management. a. management's perceptions of customer service expectations and actual customer expectations of service b. actual service quality specifications and actual service delivery c. perceived service by customers and actual customer expectations of service d. management's perception of customer service expectations and actual service quality specifications developed e. actual service delivery and what the firm communicates it delivers
Actual service quality specifications and actual service delivery his could be due to vague performance standards, poor training, or ineffective monitoring by management. So The correct answer is (b)
It could be due to a variety of factors, such as inadequate resources or technology, unexpected external factors, or changes in customer preferences. actual service quality specifications and actual service delivery. A negative gap in this context means that the actual service delivery falls short of the service quality specifications, indicating a potential quality control issue within the organization.
Learn more about service quality
https://brainly.com/question/29437771
#SPJ4
Explain the critical aspects of preparing a capital budget proposal and its biggest risks?
Preparing a capital budget proposal involves identifying investment opportunities, estimating cash flows, calculating NPV and IRR, and conducting sensitivity analysis.
The proposal should include a detailed description of the project, its expected benefits, the estimated costs, and the timeline for completion. It should also consider potential risks and uncertainties, such as changes in market conditions, unexpected costs, and the potential for the project to fail.
The biggest risks associated with preparing a capital budget proposal are related to inaccurate estimates and inadequate analysis of potential risks. Poorly estimated cash flows, incorrect assumptions about the project's useful life or potential benefits, and insufficient consideration of external factors can lead to an incorrect assessment of the project's financial feasibility.
In addition, inadequate risk analysis can result in the failure to identify and mitigate potential risks, leading to unexpected costs, delays, and other negative consequences. It is crucial to carefully evaluate potential investments and to conduct thorough analysis and risk assessment to ensure the success of a capital budget proposal.
To know more about capital budget, refer here:
https://brainly.com/question/28304454#
#SPJ11
carol fisher wants to sell the stock of hathaway international at the next available price after the prices reaches $50 per share. what type of transaction is carol making?
Carol Fisher is making a sell limit order transaction for the stock of Hathaway International once the price reaches $50 per share.
A sell limit order is a type of order to sell a security at a specified or better price, meaning that the order will only be executed if the stock reaches a particular price or higher.
Sell limit orders are a common way for investors to set a target price for selling their stocks. This type of order allows investors to control the price at which they sell their shares, ensuring that they receive a minimum price for their investment.
Once the stock price reaches the specified price or higher, the broker will execute the order and sell the stock at the next available price.Carol Fisher is making a "stop order" or "stop-loss order" transaction.
In this case, she wants to sell her Hathaway International stock when the price reaches $50 per share. A stop order is an instruction to sell the stock at the next available price after it reaches the specified price threshold, which helps protect profits or limit losses.
For more such questions on stock
https://brainly.com/question/26128641
#SPJ11
8.1 - the united mutual and accident insurance company has a large pool of clerical employees who process insurance application forms on networked computers. when the company hires a new clerical employee, it takes that person about 48 minutes to process a form. the learning curve for this job is 88%, but no additional learning will take place after about the 100th form is processed. united mutual has recently acquired a smaller competitor that will add 800 new forms per week to its clerical pool. if an employee works six hours per day (excluding breaks, meals, and so on) per five-day week, how many employees would be hired to absorb the extra workload?
United Mutual would need to hire 14 employees to absorb the extra workload.
To determine how many employees would be hired to absorb the extra workload, we need to consider the learning curve and the time it takes to process forms.
In order to calculate the number of employees needed to absorb the extra workload, follow these steps:1: Calculate the time it takes to process the 100th form using the learning curve.
The learning curve is 88%, so the time it takes to process the 100th form would be 48 minutes * 0.88^((100-1)/100) = 48 * 0.88^0.99 ≈ 30.49 minutes.
2: Determine the average time it takes to process a form after 100 forms.
Since no additional learning will take place after the 100th form, we can assume that the average time per form after 100 forms will remain 30.49 minutes.
3: Calculate the total weekly time spent processing forms.
United Mutual will have an additional 800 forms per week to process. Using the average time of 30.49 minutes per form, we can calculate the total time required as 800 * 30.49 = 24392 minutes per week.
4: Convert the total weekly time into hours.
24392 minutes ÷ 60 = 406.53 hours per week.
5: Determine the number of available work hours per employee per week.
An employee works 6 hours per day, 5 days a week, so they work a total of 6 * 5 = 30 hours per week.
6: Calculate the number of employees needed to absorb the extra workload.
To determine the number of employees needed, divide the total weekly time required (in hours) by the number of available work hours per employee per week:
406.53 ÷ 30 ≈ 13.55 employees.
Since a fraction of an employee is not possible, we'll round up to the nearest whole number. Therefore, United Mutual would need to hire 14 employees to absorb the extra workload.
Learn more about Workload:
https://brainly.com/question/12908030
#SPJ11
the materials price variance is calculated using the blank . multiple select question. standard quantity allowed of the input for the actual output actual quantity of the input purchased standard price of the input actual price of the input
The materials price variance is calculated using the actual price of the input and the standard price of the input
The materials price variance is a measure of the difference between the actual cost of materials used in production and the standard cost of those materials. The standard price of the input is the expected cost per unit of the material based on budgeted costs, supplier contracts, or historical prices. The actual price of the input is the actual cost per unit of the material purchased.
The materials price variance is calculated as the difference between the actual cost and the standard cost of the materials used. If the actual price is higher than the standard price, the variance is unfavorable, indicating that the company paid more than expected. Conversely, if the actual price is lower than the standard price, the variance is favorable, indicating cost savings. Companies can use this information to monitor costs, negotiate with suppliers, and adjust budgeted costs.
Learn more about standard cost at:
brainly.com/question/4557688
#SPJ4
some economists argue that regional free trade agreements will provide global benefits only if
Some economists argue that regional free trade agreements will provide global benefits only if trade creation exceeds trade diversion.
Free trade agreements (FTAs) are agreements reached between two or more countries on a range of topics, such as investor protections, intellectual property rights, and responsibilities influencing trade in goods and services. It could require keeping more records to be able to receive FTA benefits for your product, but it could provide it a competitive edge against products from other countries.
Each FTA has unique features, but they all generally have the same goal of lowering trade barriers and promoting more secure and open business and investment environments. Free trade agreements (FTAs) make it possible for American exporters and manufacturers to gain greater access to other markets. Tariffs are decreased or eliminated, trade barriers are removed through bilateral and global agreements, and economic growth is promoted.
Learn more about Trade Barriers here:
https://brainly.com/question/1326741
#SPJ4
a/an __________ are motivated by a desire to acquire something, for example food riots. (35)
An acquisitive mob is motivated by a desire to acquire something that is perceived as scarce or in short supply.
These mobs can form when individuals or groups feel that their access to basic necessities such as food, water, or shelter is being threatened or limited. Food riots, for example, are a common type of acquisitive mob that typically occurs in response to food shortages or rising prices. During such riots, people may take to the streets and engage in looting or other forms of violence to secure food or other essential items.
Acquisitive mobs can also form in response to perceived social or economic inequalities. In these cases, individuals may feel that they are being unfairly denied access to resources or opportunities, and may resort to violent or disruptive behavior to express their grievances. Acquisitive mobs can be difficult to control and can pose a significant threat to public safety and social stability.
Effective responses to such mobs require a combination of short-term measures, such as police intervention, and longer-term efforts to address underlying social and economic factors that contribute to mob formation.
Learn more about mob at
brainly.com/question/11669303
#SPJ4
A/an incentive is motivated by a desire to acquire something, for example, food riots.
A motivator or catalyst is something that urges someone to act. Due to a lack of resources, people are driven to buy food in the case of food riots, which gives them the incentive to take action through protests or riots. Positive or negative incentives are possible, as well as financial or non-financial ones. They may also be explicit or implicit, direct or indirect, etc. In economics, incentives are essential in determining how people, businesses, and governments behave. Designing efficient institutions and policies that advance social welfare and economic prosperity requires a thorough understanding of incentives and how they operate.
learn more about economic prosperity here:
https://brainly.com/question/13571927
#SPJ11
the opportunity cost of a purchase is: a. always equal to the selling price of what you purchased. b. the lowest possible price. c. the alternative good or service that one sacrifices because a different good was purchased. d. zero if the item is what you want most. e. always greater for people who are out of work than for people who are working.
The opportunity cost of a purchase is: c. the alternative good or service that one sacrifices because a different good was purchased. This term represents the value of the best alternative option that was not chosen when making a decision.
The opportunity cost of a purchase is the alternative good or service that one sacrifices because a different good was purchased. It is the value of the best alternative foregone. It is important to consider opportunity cost when making a decision as it helps to weigh the benefits and drawbacks of different options. It is not always equal to the selling price of what you purchased, the lowest possible price, zero if the item is what you want most, or always greater for people who are out of work than for people who are working.
Option c is correct.
To know more about opportunity cost, visit: https://brainly.com/question/13036997
#SPJ11
cars inc., a company that manufactures toy cars, originally marketed its products as being suitable for young boys. recently, it drastically changed its advertising methods to include girls within its target group. the company's advertisements now depict its products as being suitable for both girls and boys. what strategy did cars, inc. implement?
The strategy that Cars Inc. implemented is called market segmentation expansion or diversification.
Market segmentation is the process of dividing a market into smaller groups of consumers with similar needs or characteristics. In this case, Cars Inc. originally segmented their market by gender, targeting young boys with their toy cars. However, the company realized that they could expand their market by also targeting young girls.
By changing their advertising methods to include girls within their target group, Cars Inc. implemented a diversification strategy. Diversification is a growth strategy that involves expanding a company's business into new markets or product lines. In this case, Cars Inc. expanded their market segment to include young girls, thereby diversifying their customer base and potentially increasing their revenue.
Overall, by changing its advertising methods to include girls within its target group, Cars Inc. implemented a diversification strategy to expand its market segmentation and increase its potential customer base.
Click the below link, to learn more about Market segmentation:
https://brainly.com/question/31008073
#SPJ11
Problem 21-1 (LG 21-2) Jane Doe earns $30,000 per year and has applied for an $80,000, 30-year mortgage at 8 percent interest, paid monthly. Property taxes on the house are expected to be $1,200 per y ear. if her bank requires a gross debt service ratio of no more than 30%, will Jane be able to obtain the mortgage?
Jane's GDS ratio is below the bank's requirement of 30%, she should be able to obtain the $80,000 mortgage at 8% interest, paid monthly.
To determine if Jane Doe can obtain the mortgage, we first need to calculate her monthly gross income and monthly housing expenses.
Jane's monthly gross income can be calculated as follows:
$30,000 / 12 months = $2,500 per month
Next, we need to calculate her monthly housing expenses. This includes the monthly mortgage payment and property taxes. The monthly mortgage payment can be calculated using the following formula:
[tex]M = P [ i(1 + i)^n ] / [ (1 + i)^n - 1][/tex]
where M is the monthly mortgage payment, P is the principal amount of the mortgage, i is the monthly interest rate, and n is the number of months in the mortgage term.
For Jane's mortgage, we have:
P = $80,000
i = 8% / 12 = 0.0067
n = 30 years * 12 months per year = 360 months
Plugging in these values, we get:
[tex]M = $80,000 [ 0.0067(1 + 0.0067)^{360 }] / [ (1 + 0.0067)^{360 - 1 ][/tex]= $587.82 per month
Adding the property taxes, we have:
$587.82 + ($1,200 / 12) = $687.82 per month
Finally, we can calculate Jane's gross debt service ratio (GDS) by dividing her monthly housing expenses by her monthly gross income and multiplying by 100%:
GDS = ($687.82 / $2,500) x 100% = 27.51%
Since Jane's GDS ratio is below the bank's requirement of 30%, she should be able to obtain the $80,000 mortgage at 8% interest, paid monthly.
For more such questions on interest visit:
https://brainly.com/question/29415701
#SPJ11