Answer:
yes, A double replacement reaction has two compounds as reactants.
hence it's true.......
Answer:
it's true...
Explanation:
If combining cation A with a +3 charge and anion X with a -3 charge, how would we write the compound?
O AX
O A3X3
O 3AX
Answer: it’s not A3X3
Explanation:
1. AX
For binary ionic compounds (ionic compounds that contain only two types of elements), the compounds are named by writing the name of the cation first followed by the name of the anion.If a cation A carries +3 charge and an anion X carries -3 charge, the compound so formed is AX. Since the charges gets cancelled out.For example: consider aluminum phosphate, aluminum carries +3 charge and phosphate carries -3 charge, the molecular formula for the compound will be AlPO₄.Learn more:
brainly.com/question/11164440
4 Hydrogen has three naturally occurring isotopes. H.1, H-2, and H-3 The atomie mass of Hydrogen is 1.097 Which isotope is most abundant in nature? Explain
Answer:
The number following the name of the element is the number of subatomic particles inside the nucleus of the atom. This means that it is the mass number of the isotope. The average atomic mass of the element is the sum of the products of the percentage abundance and mass number of the naturally occurring isotopes.
Since, the average atomic mass of the hydrogen is nearest to 1 then, the most abundant isotope should be hydrogen-1.
The three types of intermolecular forces have different strengths. Rank
them from weakest to strongest.
If today is Monday and it is a 1st Quarter moon, what phase will it
be on Thursday?
Answer:
Wanning gibouss 56%
Explanation:
How many grams are in 8.50 e 23 formula units of NaCl?
a)82.5 g
b)8.25 g
c)85.0 g
d)91.5 g
Answer:
a)82.5 g
Explanation:
To solve this problem we will use Avogadro's number, which states the number of formula units per mole.
8.50x10²³formula units ÷ 6.023x10²³ formula units/mol = 1.41 molThen we convert 1.41 moles of NaCl to grams, using its molar mass:
1.41 mol NaCl * 58.44 g/mol = 82.4 gThe closest answer is option a).
बा
If OPPOSITE poles (N and S) of
a magnet are placed near
each other, what happens?
Type answer here
Answer:
They attract each other
Explanation:
A magnet has two poles;
North pole and south pole
When two opposite poles are placed close to each other, they attract each other. The short rule is opposite opes attract.
When two like poles are placed close to each other, they repel each other. The short rule is like poles repel.
What type of energy transfer happens when you turn on a light bulb?
Answer:In the case of an electric bulb, the electrical energy is converted to light and heat. The amount of electrical energy put into a bulb = the amount of light energy (desirable form) plus the heat energy that comes out of the bulb
Explanation:
Just trust me
Answer:
A type of energy
Explanation:
Silver is a metal; it reacts with oxygen which is a non-metal to form Silver Oxide. The bond between Silver and Oxygen is called
(Related to Science)
How do you find the scientific notation of a Avogadro's number??
Answer: ummmmmm hmmmmm
Explanation:
What is the correct formula for sodium carbonate?
a. Na(CO3)2
b. Na,(CO3)2
C. Na2CO3
Naz(CO)2
e. NaCO3
d.
a
a
b
b
ΟΟΟΟΟ
С
С
d
d
е
e
Answer:
na2 co3
Explanation:
sodium carbonate formula
Answer:
your answer is C.
Explanation:
this is what it would be like
O
|
|
Na+ C Na+
/ \
/ \
O- O-
Where are the volcano located
Answer:
In the ring of fire
Hope this acc helps
1)how is ice made?
2)what materials does it use?
3)how is it put together
Answer:
milk and sugar and vinillia it uses a machine and you stir until it forms
Explanation:
9. Good insulator should be
(a) Fire proof
(b) Chemically inert
(c) Odourless in use
(d) All of the above
Ar
Answer:
A fire proof
Explanation:
I hope this is help
Please help me, I am confused
Answer:
B
Explanation:
Ionic compound can conduct electricity
Think of the of the body that we need in order to do things like walk, run etc. What systems are these? How do they work together so you can do these activities?
Answer:
I dont get this
Explanation:
Example 1 How much water (in grams) is produced when 65.2 grams of Calcium carbonate react with phosphoric acid to form calcium phosphate, water, and carbon dioxide?
Answer:
11.75 g H2O
Explanation:
3CaCO3 + 2H3PO4 --> Ca3(PO4)2 + 3H2O + 3CO2
MM H2O = 18.02 g/mol
MM CaCO3 = 100 g/mol
? g H2O = mass CaCO3 x (1 mol CaCO3/MM CaCO3) x (3 moles H2O/3 moles CaCO3) x (MM H2O / 1 mol H2O) = (65.2/100) x 18.02 = 11.75 g H2O
Calculate the number of moles of NaOH contained in 250. mL of a 0.05M solution.
Answer:
0.0125mol
Explanation:
Molarity (M) = number of moles (n) ÷ volume (V)
n = Molarity × Volume
According to this question, a 0.05M solution contains 250 mL of NaOH. The volume in litres is as follows:
1000mL = 1L
250mL = 250/1000
= 0.250L
n = 0.05 × 0.250
n = 0.0125
The number of moles of NaOH is 0.0125mol.
Measurements show that unknown compound X has the following composition:
element mass %
carbon 74.8%
hydrogen 25.1%
Write the empirical chemical formula of X. please help
the empirical chemical formula of X is CH4
Explanation:Step 1: Imagine you have a sample of compound weighing exactly . Multiply the mass of this sample by the mass percents to find the mass of each element in the sample
Step 2: Divide the mass of each element by the element's molar mass to find the moles of each element in the sample. Remember to round your answers to the correct number of significant digits.
Step 3: Divide the moles of each element by the the smallest number of moles of any element to find the mole ratio of elements in the sample.
Step 4: Multiply the mole ratio by the smallest whole number that changes it into a whole number ratio to find the atom ratio of elements in the sample.
Note that the result of each multiplication must equal a whole number only within measurement uncertainty.
The measurement uncertainty in this calculation comes from the measurement uncertainty of the mass percents given in the question. The mass percents each have significant digits. That means each mass percent has some measurement uncertainty in the third significant digit, and only the first two significant digits can be considered completely reliable.
In Step 1 you multiplied each mass percent by something with zero uncertainty (the exactly you assumed your sample weighed), in Step 2 you divided by a measurement with more than significant digits (the molar mass of the elements), and in Step 3 you divided by a measurement with the same number of significant digits (the least number of moles of any element in the compound). None of these steps added to the measurement uncertainty of your calculation.
Therefore, the measurement uncertainty in the final result of all your calculations is determined by the measurement uncertainty in the original mass percents and will be in the third significant digit. That means the result of each of the final multiplication steps must equal a whole number only to within the first two significant digits.
The whole numbers in the last column of the table are and .
How did chemists make their proposed model of the sub atomic particles?
Answer:
Because they want to clarify or give solution to the particle that the other didn't know
Explanation:
Correct me if im wrong thanks
Helppp me pretty please
Which of the following chemical reactions produces water via a
synthesis reaction?
a 2H2 + O2 + 2H2O
b NaOH + HCI - NaCl + H2O
C CuO + H2 - Cu + H2O
d H2CO3 → CO2 + H2O
Answer:
Should be A, but also I think there should be an arrow between O2 and 2H2O
Balance the equation by typing in the correct coefficients into the blank spaces in front of each formula. Type 1 if
the coefficient is 1, do not leave space blank
_EH + _ G2 → _EG + _HG2
Answer:
2 in front of every one
Explanation:
HOPE IT HELPS
Write the equilibrium expressions for each of the following equilibria:
a. 2 Ba + O2 ⇌ 2 BaO
b. 2 Mg + O2 ⇌ 2MgO
c. P4 + 5 O2 ⇌ P4O10
Answer:
a.
[tex]K=\frac{[BaO]^2}{[Ba]^2[O_2]}[/tex]
b.
[tex]K=\frac{[MgO]^2}{[Mg]^2[O_2]}[/tex]
c.
[tex]K=\frac{[P_4O_{10}]^2}{[P_4][O_2]^5}[/tex]
Explanation:
Hello!
In this case, since the equilibrium expression is set up by dividing the products over the reactants and powering to the stoichiometric coefficient, we can proceed as follows:
a. 2 Ba + O2 ⇌ 2 BaO.
[tex]K=\frac{[BaO]^2}{[Ba]^2[O_2]}[/tex]
b. 2 Mg + O2 ⇌ 2MgO
[tex]K=\frac{[MgO]^2}{[Mg]^2[O_2]}[/tex]
c. P4 + 5 O2 ⇌ P4O10
[tex]K=\frac{[P_4O_{10}]^2}{[P_4][O_2]^5}[/tex]
Best regards.
What results when equal but opposite charges are present in two regions of a polar molecule? A. dipole B. ionic bond C. Electron sea D. crystal lattice
Answer: A. dipole
Explanation:
Dipole can be defined as the separation of the equal and opposite charges present in the molecule via ionic bonding. The water molecule comprising of two molecules of hydrogen being positively charged and one molecule of oxygen being negatively charged are connected via ionic bonding thus water molecule is an example of dipole molecule. There is unequal distribution of the electrical density throughout the molecule.
The polar molecule results in a dipole when equal but opposite charges are present in two regions.
Dipole:
Dipole arises when a molecule have opposite and equal charge in the ends.
For example - water molecule
In water molecule Oxygen is negatively charged and hydrogen have low electronegativity, this difference in electronegativities arise dipole in molecule.
Therefore, the polar molecule results in a dipole when equal but opposite charges are present in two regions.
To know more about Dipole,
https://brainly.com/question/18382778
HELP ME PLEASEEEEE!!!!!!!!!!
Answer:
I dont know what the answer is
Explanation:
HELP PLEASE❗️❗️‼️
An increase in temperature is an increase in.... ( there are two correct answers)
A.) Water molecules
B.) The melting point
C.) pressure
D.) Fun
someone plz help me.
Answer:
The answer is 2.
Explanation:
It is the only one that has a chemical change.
Hope this helped you :)
If so pls give brainliest.
How many lone pairs does this molecule have?
Answer:
Just 1 i.e., Option B.
Because except for top of the molecule, all other sides are filled with a letter meaning there is one free space.
Answer:
B
Explanation:
H . + H . -----> H:H {":" represents a covalent bond, that is, a shared pair of electrons}
A Lewis structure is a convention used to represent the covalent bonding in a molecule. Dots or lines are used to represent
valence electrons (electrons available for bonding). The Lewis structure for the hydrogen molecule is as follows.
H:H or H-H
A bonding pair is an electron pair shared between two atoms.
A nonbonding pair (lone pair, unshared pair) is a pair of electrons that remains on one atom and is not shared.
Calculate the number of moles of NaOH contained in 250. mL of a 0.05M solution.
Answer:
https://newshamchem.weebly.com/uploads/2/2/0/3/22035226/molarity_&_worksheet_answer.pdf
question 9.
Explanation:
Answer:
.0125 moles
Explanation:
Molarity = moles/volume
.05 M = moles/.250L
.0125 = moles
OMG PLEASEEEE HELPPPPPPPPPPP!!!!!!!!!!!
Answer:
the second one
Explanation:
THE answers is b