A drawing of William’s backyard is given.



If William plans to mow the yard, how much area will he have to mow?

Responses

48
yd2
48 yd, 2

96
yd2
96 yd, 2

112
yd2
112 yd, 2

144
yd2

The distance between two divers is 4 meters.

The distance (in meters)  of two divers from a shipwreck located at point X is shown by a number line.

Given,

A = -2.5

X = 0

B = 1.5

To find the distance between two divers, we have to find an expression using subtraction.

Distance between the two divers.

= | B - A |  or | A - B|

Substituting the values, we get

| 1.5 - (-2.5) |

 or

| -2.5 - 1.5|

or  1.5 - (-2.5)

1.5 - (-2.5)

If adding a number to the actual number gives the result 0, then that number is the additive inverse of the actual number.

Therefore, the additive inverse of -2.5 will be 2.5

1.5 + 2.5

= 4

Therefore, the distance between the two divers. = 4m

To learn more about additive inverse;

https://brainly.com/question/1548537

#SPJ4

The probability of getting a 6 on a loaded die is not provided, so I cannot give an exact answer. However, if we assume that the probability of getting a 6 on each roll is p, then the probability of getting exactly seven 6's in ten rolls can be calculated using the binomial distribution.

The formula for the binomial distribution is:

P(X = k) = (n choose k) * p^k * (1-p)^(n-k)

where P(X = k) is the probability of getting exactly k successes in n trials, p is the probability of success on each trial, and (n choose k) is the number of ways to choose k successes from n trials.

In this case, we want to find the probability of getting exactly seven 6's in ten rolls, so n = 10 and k = 7. We don't know p, so we can't calculate the exact probability, but we can use a range of values for p to see how it affects the probability.

For example, if we assume that p = 0.5 (i.e. the loaded die has an equal chance of rolling 6 and any other number), then the probability of getting exactly seven 6's in ten rolls is:

P(X = 7) = (10 choose 7) * 0.5^7 * 0.5^3
          = 0.117

So there is about an 11.7% chance of getting exactly seven 6's in ten rolls if the die has an equal chance of rolling 6 and any other number. If the probability of rolling a 6 is higher or lower than 0.5, the probability will be different.

Learn more about loaded die: https://brainly.com/question/21321490

#SPJ11

We can draw the conclusion that there is enough data to demonstrate that, at a significance level of = 0.05, the mean forced expiratory volume in one second for the population of 13-year-old boys in the high-pollution community differs from the established mean of 2.6 liters.

To test whether the mean forced expiratory volume in one second (FEV1) for the population of 13-year-old boys in the high-pollution community differs from the known mean of 2.6 liters, we can use a one-sample t-test.

Given that the sample size is not provided, we assume it to be large enough for the sample mean to follow a normal distribution by the central limit theorem.

The null hypothesis is: H0: μ = 2.6 (the population mean is equal to 2.6 liters)

The alternative hypothesis is: Ha: μ ≠ 2.6 (the population mean is not equal to 2.6 liters)

We will use a significance level of α = 0.05.

To find the critical value, we need to determine the degrees of freedom. Since the sample size is not given, we can assume it to be large enough (say, n > 30) and use a t-distribution with degrees of freedom approximately equal to n - 1.

Using a t-table with 30 degrees of freedom (which is conservative), the critical values for a two-tailed test with α = 0.05 are -2.042 and 2.042.

The test statistic can be calculated as:

t = (sample mean - hypothesized mean) / (sample standard deviation / sqrt(sample size))

t = (sample mean - 2.6) / (population standard deviation / sqrt(sample size))

Since the sample standard deviation is not given, we can use the population standard deviation as an estimate (assuming that the sample is representative of the population). Thus,

t = (3.0 - 2.6) / (0.5 / sqrt(n))

t = 0.4 / (0.5 / sqrt(n))

We do not know the sample size, but we can solve for n using the given sample mean and standard deviation:

standard error = population standard deviation / sqrt(n)

0.5 / sqrt(n) = (3.0 - 2.6) / t

n = (0.5 / ((3.0 - 2.6) / t))^2

n = (0.5 / (0.4 / 2.042))^2

n = 107

Thus, the sample size is 107. Now we can calculate the test statistic:

t = (3.0 - 2.6) / (0.5 / sqrt(107))

t = 4.89

The calculated t-value of 4.89 is greater than the critical value of 2.042, so we reject the null hypothesis.

We can conclude that there is sufficient evidence to suggest that the mean forced expiratory volume in one second for the population of 13-year-old boys in the high-pollution community differs from the known mean of 2.6 liters at a significance level of α = 0.05.

Read more on hypothesis here: brainly.com/question/14913351

#SPJ11

P(y-x ≤ -1/2) = ∫∫f(x,y)dxdy where y-x ≤ -1/2

= ∫(y+1/2)∫y8xydxdy (since x lies between y+1/2 and 1)

= 1/64

Therefore, P(y-x ≤ -1/2) = 1/64.

a. The joint probability distribution function of X and Y can be obtained by integrating the joint probability density function over the region where 0 ≤ y ≤ x ≤ 1:

F(x,y) = ∫∫f(u,v)dudv

= ∫y∫x8uvdudv (since 0 ≤ y ≤ x ≤ 1)

= 4xy^2

b. To find the marginal density function of Y, we integrate the joint probability density function over all possible values of X:

fY(y) = ∫f(x,y)dx from 0 to y + ∫f(x,y)dx from y to 1

= ∫y^18xydx + ∫y^18yxdx

= 4y^3

c. To find the conditional density function of X given Y = 0.5, we use the formula:

f(x|y=0.5) = f(x,0.5)/fY(0.5)

f(x,0.5) is obtained by substituting y = 0.5 in the joint probability density function:

f(x,0.5) = 4x(0.5) = 2x

fY(0.5) is obtained by substituting y = 0.5 in the marginal density function of Y:

fY(0.5) = 4(0.5)^3 = 0.5

So, f(x|y=0.5) = 2x/0.5 = 4x

d. To find P(y-x ≤ -1/2), we integrate the joint probability density function over the region where y - x ≤ -1/2:

P(y-x ≤ -1/2) = ∫∫f(x,y)dxdy where y-x ≤ -1/2

= ∫(y+1/2)∫y8xydxdy (since x lies between y+1/2 and 1)

= 1/64

Therefore, P(y-x ≤ -1/2) = 1/64.

To learn more about probability visit:

https://brainly.com/question/15124899

#SPJ11

The appropriate test to determine if Brenda's IQ is significantly different from the rest of her psychology class would be the one sample t-test.

To determine if Brenda's IQ is significantly different from the rest of her psychology class, you would use a one-sample t-test.

This test is appropriate because it compares the mean of a single sample (Brenda's IQ) to a known population mean (the rest of the class) when the population standard deviation is unknown. The one-sample t-test helps determine if there is a significant difference between the individual and the group.

The other options, such as the one sample z-test and the independent and dependent samples t-tests, are used for different types of comparisons and would not be appropriate in this scenario.

Know more about t-test here:

https://brainly.com/question/6589776

#SPJ11

The effects of the interest rate in each situation are given as follows:

The interest rate is the percentage by which an amount of money increases over a period of time.

For lower interest rate, loans or purchases are desired, as the person can pay back the loan after some time without a high additional tax.

For higher interest rates, investments are desired, as the balance of the investment should increase fast. Purchases, on the other hand, should be avoided with higher interest, as there will be a high tax for paying the purchase in installments.

More can be learned about interest rates at https://brainly.com/question/25793394

#SPJ1

To assign the sum of extra credit received to the total extra credit, you need to follow these steps:

1. Make a list of all the test grades, and mark the ones that have extra credit with a "+" sign. For example, if the test scores are: 95, 110+, 80, 120+, 100, you would mark the 110+ and the 120+.

2. Add up all the extra credit marks. In this example, that would be 110 + 120 = 230.

3. Count the number of extra credit marks. In this example, there are two.

4. Multiply the number of extra credit marks by the maximum extra credit value. If full credit is 100, then the maximum extra credit value is the amount that a student can exceed the maximum score by. In this case, that would be 20 (since 120 - 100 = 20). So, 2 x 20 = 40.

5. Add the extra credit value to the total score. In this example, the total score is 505 (95 + 110 + 80 + 120 + 100). So, you would add 40 to that to get 545.

Therefore, the answer is: To assign sum extra with the total extra credit received given list test grades, you need to add the extra credit value to the total score by multiplying the number of extra credit marks by the maximum extra credit value, and then adding that value to the total score.

To learn more about sum : brainly.com/question/29478473

#SPJ11

The probability that there is one or less theft in a minute is 0.09161 or 9.161%.

To find the probability that there is one or less theft in a minute, given that recent crime reports indicate that 4.0 motor vehicle thefts occur each minute in the USA, we can use the Poisson probability distribution formula.

The Poisson probability formula is:
P(x) = (e^(-λ) * λ^x) / x!

where λ (lambda) represents the average rate of occurrences (4.0 thefts per minute in this case), x is the number of occurrences we're interested in (0 or 1 theft), and e is the base of the natural logarithm (approximately 2.71828).

We want to find the probability of having 0 or 1 theft, so we'll calculate the probabilities for x=0 and x=1, and then add them together.

For x = 0:
P(0) = (e^(-4) * 4^0) / 0! = (0.01832 * 1) / 1 = 0.01832

For x = 1:
P(1) = (e^(-4) * 4^1) / 1! = (0.01832 * 4) / 1 = 0.07329

Now, we add the probabilities together:
P(0 or 1 theft) = P(0) + P(1) = 0.01832 + 0.07329 = 0.09161

So, the probability that there is one or less theft in a minute, given the Poisson distribution, is approximately 0.09161 or 9.161%.

Know more about probability here:

https://brainly.com/question/13604758

#SPJ11

The graph of the function is given above.

The graph of the function f(x) = x + 3x + 2 is a parabola that opens upwards.

We have,

The graph of the function f(x) = x + 3x + 2 is a parabola.

The coefficient of x² is positive, so the parabola opens upwards.

To sketch the graph of the function, we can use the vertex formula.

The x-coordinate of the vertex is given by -b/2a, where a and b are the coefficients of x^2 and x, respectively.

In this case, a = 1 and b = 3, so the x-coordinate of the vertex is -3/2.

To find the y-coordinate of the vertex, we can substitute this value of x into the function to get:

f(-3/2) = (-3/2)^2 + 3(-3/2) + 2 = 1/4 - 9/2 + 2 = -15/4

So the vertex is at (-3/2, -15/4).

We can also find the y-intercept by setting x = 0:

f(0) = 0² + 3(0) + 2 = 2

So the y-intercept is at (0, 2).

Thus,

The graph of the function is given below.

Learn more about functions here:

https://brainly.com/question/28533782

#SPJ1

The derivative of f(x) = log(1 - x) by expanding it into a power series is f'(x) = -(1 + x + x^2 + x^3 + ...).

To find the derivative of f(x) = log(1 - x) by expanding it into a power series, we first need to expand log(1 - x) using a power series and then differentiate term by term.

Here's how to do it:

1. Recall the power series expansion for the natural logarithm of (1 - x):
  ln(1 - x) = -(x + x^2/2 + x^3/3 + x^4/4 + ...)

2. Now we have the power series representation of f(x):
  f(x) = -(x + x^2/2 + x^3/3 + x^4/4 + ...)

3. Differentiate term-by-term with respect to x:
  f'(x) = -[1 + (2x)/2 + (3x^2)/3 + (4x^3)/4 + ...]

4. Simplify the expression:
  f'(x) = -[1 + x + x^2 + x^3 + ...]

Learn more about derivative:https://brainly.com/question/23819325

#SPJ11

The coffee cup has a volume of around 240.3 cubic centimeters.

The volume of a cylinder is given by the formula

V = πr²h, where r is the radius and h is the height.

Substituting the given values, we have:

V = π(3²)(8.5)

V = 240.331 cubic centimeters (rounded to the nearest tenth)

Therefore, the volume of the coffee cup is approximately 240.3 cubic centimeters.

Learn more about Volume here:

https://brainly.com/question/1578538

#SPJq

The area and Perimeter of the figures are:

1) A = 77.1 cm²

2) A = 22 cm²

3) A = 84.82 cm²

4) A = 86.14 cm²

P = 33.33 cm²

1) The area of a circle is:

A = πr²

Thus, area of shaded region is:

A = (π * 6²) - (6 * 6)

A = 77.1 cm²

2) Area of shaded region is:

A = (π * 3²) - ((π * 1²) + (π * 1²))

A = 7 * π

A = 22 cm²

3) Area of the composite figure is:

A = ¹/₂(π * 9²) + 3*¹/₂(π * 3²)

A = 84.82 cm²

4) Area of composite figure is:

A = ¹/₂(π * 3²) + ¹/₂(6 * 6)

A = 86.14 cm²

Perimeter of composite figure is:

P = 6 + √72 + (2 * π * 3)

P = 33.33 cm²

Read more about Area and Perimeter at: https://brainly.com/question/19819849

#SPJ1

The table is:

                                    Has Disease    Does Not Have Disease     Total
Positive Test Result:         16,740                4,620                           21,360
Negative Test Result:        1,260                37,380                          38,640
Total:                                  18,000              42,000                          60,000

1. Total population: 60,000
2. Disease prevalence: 30% of the population has the disease, so 0.30 * 60,000 = 18,000 people have the disease, and 60,000 - 18,000 = 42,000 people do not have the disease.
3. Sensitivity (True Positive Rate): 93% means that out of those with the disease, 93% will test positive. So, 0.93 * 18,000 = 16,740 positive tests among those with the disease.
4. Specificity (True Negative Rate): 89% means that out of those without the disease, 89% will test negative. So, 0.89 * 42,000 = 37,380 negative tests among those without the disease.
5. False Negative Rate: Since the test has a sensitivity of 93%, the false negative rate is 100% - 93% = 7%. Thus, 0.07 * 18,000 = 1,260 false negatives.
6. False Positive Rate: Since the test has a specificity of 89%, the false positive rate is 100% - 89% = 11%. Thus, 0.11 * 42,000 = 4,620 false positives.

Now we can fill in the table:

                                    Has Disease    Does Not Have Disease     Total
Positive Test Result:         16,740                4,620                           21,360
Negative Test Result:        1,260                37,380                          38,640
Total:                                  18,000              42,000                          60,000

Learn more about "test": https://brainly.com/question/3787717

#SPJ11

Answer: exact form-√10 decimal form- 3.16227766...

Step-by-step explanation:

Hope this helps.

The midpoint of the line segment is (-5/2, 5/2). To find the distance between two points on a coordinate plane, we use the distance formula:

d = √((x₂ - x₁)² + (y₂ - y₁)²)

Using this formula, we can find the distance between the points (-4,2) and (-1,3):

d = √((-1 - (-4))² + (3 - 2)²)
d = √(3² + 1²)
d = √10

Therefore, the distance between the two points is √10, which is approximately 3.16 units.

To find the midpoint of the line segment defined by these two points, we use the midpoint formula:

((x₁ + x₂)/2, (y₁ + y₂)/2)

Using this formula, we can find the midpoint of the line segment:

(((-4) + (-1))/2, (2 + 3)/2)
((-5/2), (5/2))

Therefore, the midpoint of the line segment is (-5/2, 5/2).

Learn more about distance ere:

brainly.com/question/12356021

#SPJ11

The greatest common divisor of the sequence 16 +10n-1, n = 1,2,... is 5.

To find the greatest common divisor of the sequence 16 +10n-1, n = 1,2,..., we can start by finding the values of the sequence for the first few terms:

When n = 1, the sequence is 16 + 10(1) - 1 = 25
When n = 2, the sequence is 16 + 10(2) - 1 = 35
When n = 3, the sequence is 16 + 10(3) - 1 = 45

We can see that all the terms in the sequence are odd numbers. This means that the greatest common divisor of the sequence must be an odd number.

To find the greatest common divisor, we can use the Euclidean algorithm. Let's start by finding the greatest common divisor of the first two terms:

gcd(25, 35) = gcd(25, 35 - 25) = gcd(25, 10) = gcd(5 x 5, 2 x 5) = 5

Now, let's find the greatest common divisor of the third term and the greatest common divisor of the first two terms:

gcd(45, 5) = gcd(5 x 9, 5) = 5

Therefore, the greatest common divisor of the sequence 16 +10n-1, n = 1,2,... is 5.

Learn more about Sequence: https://brainly.com/question/18109692

#SPJ11

The approximated length of the arc CE is: 17 inches

The formula for length of arc in degrees is:

s = 2πr (θ/360°)

Where:

r is radius

θ is angle subtended by arc

We are given:

r = 7

θ = 140°

Thus:

S = 2* 22/7 * 7 * (140/360°)

S = 17

Read more about Length of arc at: https://brainly.com/question/2005046

#SPJ1

The area of the region between the curves y = x^2 and y = x^3 is 1/12 sq units. The correct answer is option a.

To find the area of the region between the curves y = x^2 and y = x^3, we need to integrate the difference between the two curves with respect to x from the point where they intersect.

First, we need to find where the curves intersect by setting them equal to each other:
x^2 = x^3
x^3 - x^2 = 0
x^2(x-1) = 0
x = 0 or x = 1

So the curves intersect at x = 0 and x = 1.

Now, we can set up the integral to find the area between the curves:
A = ∫[0,1] (x^3 - x^2) dx

Evaluating the integral, we get:
A = [x^4/4 - x^3/3] from 0 to 1
A = (1/4 - 1/3) - (0 - 0)
A = 1/12 sq units

Learn more about curves:

https://brainly.com/question/30452445

#SPJ11

The distance from (−4, 7) to (−4, −10) is 17 unit.

We have the points (-4, 7) and (-4, -10)

Using the distance formula

d = √(-4 - (-4))² + (-10-7)²

d= √(-4+4)² + (-17)²

d= √0² + 289

d= √0 + 289

d = 17 unit

Thus, the distance is 17 unit.

Learn more about Distance formula here:

https://brainly.com/question/28956738

#SPJ1

The diameter of the headlight's opening is 4 inches.

To find the diameter of the headlight's opening, we need to determine the distance between the two points on the paraboloid where the depth is 2 inches.

Using the formula for the paraboloid of revolution, we know that the equation for the shape of the headlight is:
[tex]y^2 = 4px[/tex]

where p is the distance from the vertex to the focus. In this case, p = 1 inch.

To find the distance between two points on the paraboloid where the depth is 2 inches, we can set y = ±2 and solve for x:

[tex]4p^2 = 4x(\pm2)\\x = p^2/\pm1[/tex]

Since we're interested in the distance between two points, we can subtract the two x-values:

[tex]x^2 - x^1 = p^{2/1} - p^{2/-1}\\x^2 - x^1 = 2p^2[/tex]
Substituting in the value of p, we get:

x2 - x1 = 2(1^2) = 2

So the distance between the two points where the depth is 2 inches is 2 inches.

To find the diameter of the headlight's opening, we need to double this distance and then multiply by the focal length:

d = 2(2)(1) = 4 inches

Therefore, the diameter of the headlight's opening is 4 inches.

learn more about diameter

https://brainly.com/question/30428141

#SPJ11

The work done on lifting the steel beam by crane upwards is 3.3×10⁵ joules, based on given data.

Since the crane is lifting the steel beam upwards, the total force will be sum of mass and force due to acceleration due to gravity.

So, the formula will be-

W = F × d

W = m(g + a) × d

W = 425 (10 + 1.8) × 66

Performing addition in the parenthesis first

W = 425 × 11.8 × 66

Multiplying all the digits on Right Hand Side of the equation

W = 3,30,990 Joules

Hence, the work done is 3.3 × 10⁵ Joules

Learn more about work done -

https://brainly.com/question/30462591

#SPJ4

Yes, irrational numbers such as π are included in the domain of the function f(x) = 7.

The domain of a function is the set of all possible input values (x) for which the function is defined. In the case of the function f(x) = 7, the output value (y) is always equal to 7, regardless of the input value.

Since every real number, including irrational numbers like π, can be an input value for f(x) = 7, the domain of this function is the set of all real numbers, which includes both rational and irrational numbers. Therefore, π is included in the domain of the function f(x) = 7.

To know more about  irrational numbers here

https://brainly.com/question/26862717

#SPJ4

The annual interest savings is the amount Toni would save each year in interest charges due to the lower APR. It would be around  0.375%

Let x be the original APR. Then the first purchase of a point reduced the APR to x - 0.125%, the second point reduced it further to x - 0.25%, and the third point reduced it to x - 0.375%. Since Toni's new APR is 3.2%, we have:

x - 0.375% = 3.2%

Solving for x, we get:

x = 3.2% + 0.375% = 3.575%

Therefore, Toni's original APR was 3.575%.

To check our answer, we can use the fact that Toni purchased 3 points at a cost of 1% each. Since her loan value is the total cost of the points ($8,100) divided by the cost per percent (1%), we have:

loan value = $8,100 / 1% = $810,000

The reduction in APR due to the 3 points is 0.375%, which is equivalent to a reduction in the annual interest rate of:

0.375% / 100% = 0.00375

The annual interest savings due to the reduction in APR is then:

$810,000 x 0.00375 = $3,037.50

The annual interest savings is the amount Toni would save each year in interest charges due to the lower APR. Dividing this by the loan value gives us the actual reduction in APR:

$3,037.50 / $810,000 = 0.00375 = 0.375%

This confirms that our answer for the original APR is correct.

To know more about interest here

https://brainly.com/question/25720319

#SPJ4

Maria sells each scarf for  $33 if Maura spends $5.50 in materials to make a scarf and she sells each scarf for 600% of the cost of material

Given that Maura spends $5.50 in materials to make a scarf.

Maura sells each scarf for 600% of the cost of material

Let us find 600 % of 5.50

600/100×5.50

6×5.50

$33

Maria sells each scarf for 600% of the cost of materials, which means she sells each scarf for 6 times the cost of materials.

Therefore, Maria sells each scarf for  $33.

To learn more on Percentage click:

https://brainly.com/question/24159063

#SPJ1

Answer: the point is (5,4)

A Class A defect is considered very serious and will most likely cause operating failure.

Designed experiments are important tools for optimizing processes, identifying interactions among variables, and reducing variation in processes.

We have,

A Class A defect is typically the most severe type of defect in a manufacturing or quality control context.

It usually means that a product or component has a flaw that is likely to cause it to fail in normal use or operation, posing a significant risk to safety or functionality.

Designed experiments, also known as DOE (Design of Experiments), are a commonly used statistical tool in process optimization and improvement.

They involve careful planning and executing a series of controlled tests or trials to systematically investigate the effects of different process variables or factors on a given output or response variable.

Thus,
A Class A defect is considered very serious and will most likely cause operating failure. Designed experiments are important tools for optimizing processes, identifying interactions among variables, and reducing variation in processes.

Learn more about designed experiments here:

https://brainly.com/question/639672

#SPJ11

The As Fed weight of the bale is 733.33 lbs and in  1 ton (2000 lbs) of that hay there would be  1740 lbs of DM.

You have a bale of hay that is 87% DM, and there is 638 lbs of DM in that bale. To find the As Fed weight of the bale, you can use the following formula:

As Fed weight = (DM weight) / (% DM)

Step 1: Convert the percentage to a decimal:
87% DM = 0.87

Step 2: Plug the values into the formula:
As Fed weight = (638 lbs) / (0.87)

Step 3: Calculate the As Fed weight:
As Fed weight ≈ 733.33 lbs

So, the As Fed weight of the bale is approximately 733.33 lbs.

Now, to find how many pounds of DM would be in 1 ton (2000 lbs) of that hay, you can use the following formula:

DM in 1 ton = (2000 lbs) * (% DM)

Step 1: We already have the percentage as a decimal (0.87).

Step 2: Plug the values into the formula:
DM in 1 ton = (2000 lbs) * (0.87)

Step 3: Calculate the DM in 1 ton:
DM in 1 ton = 1740 lbs

Therefore, there would be 1740 lbs of DM in 1 ton (2000 lbs) of that hay.

Learn more about : DM - https://brainly.com/question/31694541

#SPJ11

The probability of receiving the franchise should be high enough to result in a positive NPV. The exact probability will depend on various factors such as the cost of building the hotel, expected revenues, and expenses.

To determine the minimum probability of receiving the franchise that Sporthotel will accept and still believe it is wise to build the hotel, you'll need to calculate the Net Present Value (NPV). NPV is a financial metric that considers the difference between the present value of cash inflows and the present value of cash outflows over a specific period of time.

To calculate NPV, you will need information on cash inflows, cash outflows, the discount rate, and the project's duration. You can use the following formula:

NPV = ∑ [(Cash inflow - Cash outflow) / (1 + Discount rate)^t] - Initial investment

Here, "t" represents the time period.

To find the minimum probability that results in a positive NPV, you will need to identify the cash inflows and outflows associated with receiving the franchise and building the hotel. Once you have these values, you can plug them into the NPV formula and adjust the probability until you find the value that results in a positive NPV.

In conclusion, the minimum probability of receiving the franchise that Sporthotel will accept is the probability that results in a positive NPV, which indicates that the project is expected to generate a positive return on investment.

To learn more about probability, click here:

brainly.com/question/30034780

#SPJ11

Eastwood Enterprises offers horseback riding lessons and during the month of June, the company provided lessons on account totaling $5,100. By the end of the month, the company received on account $4,500 of this amount, meaning there is still $600 outstanding.

Eastwood Enterprises offered horseback riding lessons during the month of June, and the total value of lessons provided on account was $5,100. Here's a step-by-step explanation of the transactions:

1. Eastwood Enterprises provides horseback riding lessons worth $5,100 on account in June.
2. By the end of June, the company receives $4,500 on account from the customers who took lessons during that month.
3. In addition to the June payments, Eastwood also receives $500 on account from customers who took lessons in May.

To summarize, Eastwood Enterprises provided $5,100 worth of lessons on account in June, received $4,500 from those June lessons, and an additional $500 from customers who had taken lessons in May.

Learn more about :

Outstanding : brainly.com/question/30450672

#SPJ11