A factory that has 6 X 10³ workers makes 2.4 X 105 products each day.
What is the average amount of
products made per worker?

The height is 3 units.

We have,

l = 4 and b= 3

Using Pythagoras theorem

d² = l² + b²

d² = 4² + 3²

d² = 16 + 9

d² = 25

d= 5 unit

let h be the height.

Again, using Pythagoras theorem

34 = 25 + h²

h² = 9

h= 3 unit

Learn more about Pythagoras theorem here:

https://brainly.com/question/343682

#SPJ1

Answer:

C

Step-by-step explanation:

using the sine ratio and the exact value

sin45° = [tex]\frac{1}{\sqrt{2} }[/tex] , then

sin45° = [tex]\frac{opposite}{hypotenuse}[/tex] = [tex]\frac{5}{x}[/tex] = [tex]\frac{1}{\sqrt{2} }[/tex] ( cross- multiply )

x = 5[tex]\sqrt{2}[/tex]

a. The converse, inverse and contrapositive are "If you cannot attend this movie, then you are under age 17.", "If you are over age 16, then you can attend this movie." and  "If you can attend this movie, then you are not under age 17."

The original statement is an example of a conditional statement, which is a statement of the form "if A, then B." The part that comes after "if" is called the hypothesis, and the part that comes after "then" is called the conclusion.

To find the converse of the statement, we switch the hypothesis and conclusion. The converse of a conditional statement may or may not be true. In this case, the converse is not true.

To find the inverse of the statement, we negate both the hypothesis and conclusion. The inverse of a conditional statement may or may not be true. In this case, the inverse is not true.

To find the contrapositive of the statement, we switch and negate both the hypothesis and conclusion. The contrapositive of a conditional statement is always true if the original statement is true. In this case, the contrapositive is true.

Read more about conditional statements at

https://brainly.com/question/27839142

#SPJ1

The smaller number is 6 .

The larger number is 22

Let's let x be the smaller number and y be the larger number.

From the problem, we know that one number is eight less than five times the other, so we can write:

y = 5x - 8

We also know that the sum of the two numbers is 28, so we can write:

x + y = 28

Now we have two equations in two variables. We can solve for one of the variables in terms of the other, and substitute that expression into the other equation to eliminate one variable.

Let's solve the first equation for x

x = (y + 8)/5

Now we can substitute this expression for x into the second equation:

(y + 8)/5 + y = 28

Multiplying both sides by 5 to eliminate the fraction, we get:

y + 8 + 5y = 140

Combining like terms, we get:

6y + 8 = 140

Subtracting 8 from both sides, we get:

6y = 132

Dividing both sides by 6, we get:

y = 22

Now we can use the equation y = 5x - 8 to solve for x:

22 = 5x - 8

Adding 8 to both sides, we get:

30 = 5x

Dividing both sides by 5, we get:

x = 6

Therefore, the smaller number is 6 and the larger number is 22.

Learn more about Algebraic Equation here : brainly.com/question/24875240

#SPJ1

Answer:

below

Step-by-step explanation:

To find out how many bunches of each flower the shop should order, we need to calculate the percentage of customers who preferred each flower, and then use that percentage to estimate the number of bunches needed for each flower.

First, we need to calculate the total number of customers who were surveyed:

Total customers surveyed = 8 + 4 + 8 + 20 = 40

Next, we can calculate the percentage of customers who preferred each flower:

Percentage of customers who preferred daisy = (8/40) x 100% = 20%

Percentage of customers who preferred gardenia = (4/40) x 100% = 10%

Percentage of customers who preferred mum = (8/40) x 100% = 20%

Percentage of customers who preferred rose = (20/40) x 100% = 50%

Now, we can use these percentages to estimate how many bunches of each flower to order.

Let's assume that each bunch contains 10 flowers (this is just an example, the actual number may vary):

Number of bunches of daisy to order = 20% of 50 bunches = 10 bunches

Number of bunches of gardenia to order = 10% of 50 bunches = 5 bunches

Number of bunches of mum to order = 20% of 50 bunches = 10 bunches

Number of bunches of rose to order = 50% of 50 bunches = 25 bunches

So, the shop should order 10 bunches of daisy, 5 bunches of gardenia, 10 bunches of mum, and 25 bunches of rose to meet the expected demand on Sunday.

Answer:

hm

Step-by-step explanation:

The reason why it is possible to draw two different rectangles that have an area of 30 square inches is that there are multiple pairs of whole numbers that multiply to 30. For example, a rectangle with dimensions 5 inches by 6 inches has an area of 30 square inches, and so does a rectangle with dimensions 2 inches by 15 inches.

However, the number 7 is a prime number, which means it can only be divided evenly by 1 and itself. Therefore, the only way to get an area of 7 square inches for a rectangle is by multiplying 1 and 7, which means the dimensions of the rectangle would be 1 inch by 7 inches. Since there are no other pairs of whole numbers that multiply to 7, it is not possible to draw two different rectangles with an area of 7 square inches.

a) The degree of the interpolant is 3.

b) Required system of equations are

[tex]a_0 + 3a_1 + 9a_2 = 4 \\ a_0 + 5a_1 + 25a_2 = 80 \\ a_0 + 7a_1 + 49a_2 = 188 \\ a_0 + 10a_1 = 245 \\ a_0 + 13a_1 = 305 \\ a_0 + a_1 + a_2 + a_3 = 9 \\ a_0 + 2a_1 + 4a_2 + 6a_3 = 15 \\ a_0 + 4a_1 + 16a_2 + 36a_3 = 87 \\ a_0 + 6a_1 + 36a_2 + 216a_3 = 279[/tex]

c) Required Vandermonde matrix corresponding to the system of equations are [ 1 3 9; 1 5 25; 1 7 49], [1 10; 1 13], [1 1 1 1; 1 2 4 6; 1 4 16 36; 1 6 36 216].

a) How to determine the degree of the interpolant?

To determine the degree of the interpolant, we count the number of data points in each set, subtract one, and take the minimum of the resulting values. This is because a polynomial of degree n can exactly interpolate n+1 distinct data points.

For the first set, we have 3 data points, so the interpolant can have degree at most 2.

For the second set, we have 2 data points, so the interpolant can have degree at most 1.

For the third set, we have 4 data points, so the interpolant can have degree at most 3.

b) How to find the interpolant for each set?

To find the interpolant for each set, we need to solve a system of equations. Let f(x) be the interpolant for each set, and let [tex]x_i[/tex] be the x-coordinate of the ith data point, and yi be the corresponding y-coordinate. Then we need to find the coefficients [tex]a_0, a_1, ..., a_n[/tex] such that [tex]f(x_i) = a_i(x_i)^n + a_{i-1}(x_i)^{(n-1)} + ... + a_1 \times x_i + a_0 = y_i[/tex] for i = 1, 2, ..., m, where m is the number of data points in the set. This gives us m equations in n+1 unknowns.

For the first set,

[tex]a_0 + 3a_1 + 9a_2 = 4 \\ a_0 + 5a_1 + 25a_2 = 80 \\ a_0 + 7a_1 + 49a_2 = 188[/tex]

For the second set,

[tex]a_0 + 10a_1 = 245 \\ a_0 + 13a_1 = 305[/tex]

For the third set,

[tex]a_0 + a_1 + a_2 + a_3 = 9 \\ a_0 + 2a_1 + 4a_2 + 6a_3 = 15 \\ a_0 + 4a_1 + 16a_2 + 36a_3 = 87 \\ a_0 + 6a_1 + 36a_2 + 216a_3 = 279[/tex]

c) The Vandermonde matrix corresponding to the system of equations is an m x (n+1) matrix V, where the ith row is [tex] [x_i^n, x_i^{(n-1)}, ..., x_1, 1] [/tex] for i = 1, 2, ..., m. The columns of the matrix correspond to the coefficients of the interpolant.

For the first set,

V = [ 1 3 9; 1 5 25; 1 7 49]

For the second set,

V = [1 10; 1 13]

For the third set,

V = [1 1 1 1; 1 2 4 6; 1 4 16 36; 1 6 36 216]

Learn more about Matrix here,

https://brainly.com/question/1279486

#SPJ1

Answer: Since we know that cos A = 3/10, we can use the Pythagorean identity to find sin A:

sin^2 A + cos^2 A = 1

sin^2 A = 1 - cos^2 A

sin A = sqrt(1 - cos^2 A)

Substituting cos A = 3/10, we get:

sin A = sqrt(1 - (3/10)^2)

sin A = sqrt(1 - 9/100)

sin A = sqrt(91)/10

Since we also know that tan A < 0, we know that the sine and tangent of A have opposite signs, and therefore sin A is negative.

Therefore:

sin A = -sqrt(91)/10

Step-by-step explanation:

The value of

m∠GHJ = (3(20°)+50)° = 110°.

m∠GkJ = (4(20°)-10)° = 70°

m∠HJK = (4(20°))° = 80°

What is an angle?

An angle is a figure in Euclidean geometry made up of two rays that share a common terminal and are referred to as the angle's sides and vertices, respectively. Angles created by two rays are in the plane where the rays are located. The meeting of two planes also creates angles. We refer to these as dihedral angles.

Here, we have

Given: Circle B is shown, with GHJK inscribed in the circle. The m∠GHJ = (3x+50)°, and m∠HJK = (4x)° and mLGK] = (4x-10)°.

we have to find the value of HJK and JHG.

We know that

m∠GHJ + m∠GkJ = 180°

(3x+50)° + (4x-10)° = 180°

7x + 40 = 180°

7x = 140°

x = 20°

Hence, the value of

m∠GHJ = (3(20°)+50)° = 110°.

m∠GkJ = (4(20°)-10)° = 70°

m∠HJK = (4(20°))° = 80°

To learn more about the angle from the given link

https://brainly.com/question/24999711

#SPJ1

we can replace the second occurrence of x = -2 with x = 1:

What is function?

In mathematics, a function is a relationship between two sets of elements, called the domain and the range, such that each element in the domain is associated with a unique element in the range.

For the table to be a function, each x-value must correspond to a unique y-value. To determine the missing x-value, we need to find if there are any repeated x-values with different y-values.

The x-value 3 is paired with y-values -3 and -1, which means that the table is not a function. Therefore, we need to replace one of the x-values that appears twice with a different value.

Since x = 0 is already paired with y = 5, we cannot use 0 as the replacement. The only other x-value that appears more than once is x = -2. Therefore, we can replace one of the occurrences of x = -2 with a different value.

For example, we can replace the second occurrence of x = -2 with x = 1:

x    y

3   -3

1    4

-2  -1

-2  -2

0    5

Now each x-value corresponds to a unique y-value, so the table represents a function.

To learn more about functions from the given link:

https://brainly.com/question/12431044

#SPJ1

The average rate of change in fuel consumption per year from 1995 to 1997 will be option c.) 4 gallons per year

The average rate of change, sometimes referred to as the average rate of variation, is a measurement of the average rate of change of a quantity over a certain period of time or space. It is frequently used in physics, mathematics, and other academic fields to explain how quickly one quantity changes with relation to another.

For given problem,

[tex]\text{Average fuel consumption per year per passenger car in 1995} = 530\; gallons[/tex]

[tex]\text{Average fuel consumption per year per passenger car in 1997} = 538\; gallons[/tex]

[tex]\text{Change in fuel consumption } \delta g= 538 - 530 = 8 \;gallons[/tex]

[tex]\text{Change in years} \; \delta t= 1997 - 1995 = 2 \;years[/tex]

We can now determine the average annual change in fuel consumption:

[tex]\text{Average rate of change} = \text{Change in fuel consumption} /\text{ Change in years}[/tex]

[tex]\delta g/ \delta t[/tex]= [tex]8\; gallons / \;2 \;years= 4 \;gallons\; per\; year[/tex]

Hence, 4 gallons per year is the accurate average rate of change in gasoline usage per passenger automobile between 1995 and 1997. This shows that, on average, fuel efficiency declined throughout this time for passenger cars in the United States, with average gasoline usage rising.

Learn more about average rate of change here:

https://brainly.com/question/23715190

#SPJ1

IQR offers a more accurate indicator of consistency than range since it is less impacted by outliers.

Due to Bus 18's smaller IQR, we can infer that it is more consistent than Bus 47.

An indicator of statistical dispersion used to describe the variability of a dataset is the interquartile range (IQR). It is derived by subtracting a dataset's 75th percentile (Q3) from its 25th percentile (Q1). When compared to other measures of variability like range, the IQR represents the middle 50% of the data and is less susceptible to outliers.

We must contrast the measurements of variability for the two buses in order to determine which one is more reliable. We can utilize range and interquartile range as measurements of variability. (IQR).

The range of a dataset is the difference between its maximum and minimum values.

The range for Bus 18 is 16 (22 - 6), whereas the range for Bus 47 is 24. (28 - 4).

A measure of variability that is less impacted by outliers than the range is the interquartile range (IQR). It is determined as the difference between a dataset's third and first quartiles (Q3 and Q1, respectively).

The IQR is 16 for Bus 18 (Q3 - Q1 = 22 - 6)

IQR offers a more accurate indicator of consistency than range since it is less impacted by outliers. Due to Bus 18's smaller IQR, we can infer that it is more consistent than Bus 47.

To know more about interquartile range visit:

brainly.com/question/29204101

#SPJ1

Answer:

Least: 565

Greatest: 574

Step-by-step explanation:

564 would round down to 560 and 575 would round to 580

Helping in the name of Jeus.

The least whole number that rounds to 570 when rounded to the nearest ten is 570. The greatest whole number that rounds to 570 when rounded to the nearest ten is 580.

To find the least whole number that rounds to 570 when rounded to the nearest ten, we need to look at the digit in the tens place. In this case, the tens digit is 7. Since the number can only round up or down, we need to determine if rounding 570 to the nearest ten would be up or down. Since 570 is closer to 570 than to 580, we can round down to 570. Therefore, the least whole number that rounds to 570 when rounded to the nearest ten is 570 itself.

On the other hand, to find the greatest whole number that rounds to 570 when rounded to the nearest ten, we again need to look at the digit in the tens place. Since the tens digit is 7, we need to determine if rounding 570 to the nearest ten would be up or down. Since 570 is closer to 580 than to 570, we can round up to 580. Therefore, the greatest whole number that rounds to 570 when rounded to the nearest ten is 580.

Learn more about rounding here:

https://brainly.com/question/34045884

#SPJ2

The answer is 1,764 in^2

The experimental probability of spinning a 4 will equals to 0.3.

Outcome   Tally   Frequency

1                   IIII          4

2                  III           3

3                  IIIIIIII       7

4                  IIIIII        6  

                   Total     20

The probability of spinning a 4:

= 6/20

= 3/10

= 0.3

Read more about probability

brainly.com/question/24756209

#SPJ1

The statement that describes the mean number of hours worked through which the relation is satisfied is The mean is the highest number or hours worked by any students in the group

What about mean?

In mathematics, the mean is a measure of central tendency that represents the average value of a set of numbers. It is often called the arithmetic mean, and it is calculated by adding up all the values in the set and then dividing the result by the total number of values.

The formula for the mean is:

mean = (sum of all values) / (total number of values)

For example, suppose we have a set of four numbers: 2, 5, 8, and 11. To find the mean of this set of numbers, we add them up and divide by the total number of values:

mean = (2 + 5 + 8 + 11) / 4

mean = 26 / 4

mean = 6.5

Therefore, the mean of this set of numbers is 6.5. The mean is a commonly used measure of central tendency in statistics and data analysis, and it provides a way to summarize the general trend or average of a data set.

According to the given information:

Mean of the given condition is,

⇒    [tex]\frac{3 + 5 + 4 + 4 + 2 + 5}{6}[/tex]

⇒    [tex]\frac{23}{6}[/tex]

⇒    3.83 mean of the given condition.

So, it indicate that The mean is the highest number or hours worked by any students in the group.

To know more about mean visit:

https://brainly.com/question/31101410

#SPJ1

Okay, here are the steps to find the probability the randomly selected pitcher is left-handed:

1) There are 1 left-handed starter, 4 right-handed starters, 2 left-handed relievers and 1 right-handed reliever.

2) In total, there are 1 + 4 + 2 + 1 = 8 pitchers.

3) Of the 8 pitchers, 1 + 2 = 3 are left-handed.

4) So the probability the randomly selected pitcher is left-handed = (3/8) = 3/8 = 0.375

Therefore, the probability that the randomly selected pitcher from the team is left-handed is 0.375.

Let me know if you have any other questions!

Answer:

If ticket sales were $3,000 for 400 tickets then 280 students attended the play.

Step-by-step explanation:

Standard deviation does not mean independent events.

No, the standard deviation is a measure of the spread or variability of a set of data. It measures how much the individual data points in a dataset deviate from the mean or average of the dataset.

Independence, on the other hand, refers to the relationship between two or more events, where the occurrence of one event does not affect the probability of the other event occurring.

Standard deviation is not directly related to the concept of independence. However, when calculating the standard deviation of a dataset, it assumes that each data point is independent and identically distributed. This means that the value of one data point does not affect the value of another data point, and that each data point is drawn from the same underlying distribution.

Learn more on standard deviation here;

https://brainly.com/question/24298037

#SPJ1

a) The angular velocity of the wheel is approximately 1.0667 radians per second. b) The wheel will spin at approximately 10.16 revolutions per minute.

Angular velocity is a measure of how quickly an object rotates or revolves around a fixed point, such as an axis or a center of rotation. It is a vector quantity that describes the rate of change of an object's angular position with respect to time, and is usually expressed in units of radians per second (rad/s) or degrees per second (deg/s).

a) To find the angular velocity of the wheel, we can use the formula:

angular velocity = linear velocity / radius

In this case, the linear velocity of the hamster is 16 centimeters per second, and the radius of the wheel is 15 centimeters. So, we have:

angular velocity = 16 / 15

angular velocity = 1.0667 radians per second

Therefore, the angular velocity of the wheel is approximately 1.0667 radians per second.

b) To find the speed of the wheel in revolutions per minute, we need to convert the angular velocity from radians per second to revolutions per minute. There are 2π radians in one revolution, and 60 seconds in one minute. So, we can use the following formula:

angular velocity (in revolutions per minute) = angular velocity (in radians per second) * 60 / 2π

Plugging in the angular velocity we found in part (a), we get:

angular velocity (in revolutions per minute) = 1.0667 * 60 / 2π

angular velocity (in revolutions per minute) ≈ 10.16 revolutions per minute

Therefore, the wheel will spin at approximately 10.16 revolutions per minute.

To know more about angular velocity visit:

https://brainly.com/question/15154527

#SPJ1

The ratio between yellow to red is 1 to 2 or 1:2. Answer: not listed.

What is probability?

Probability is a measure of the likelihood of an event occurring. It is a number between 0 and 1, where 0 means the event is impossible and 1 means the event is certain to happen.

First, we can use the given information to find the ratio between green and yellow:

6 yellow = 5 green

=> green/yellow = 6/5

Next, we can use the given information to find the ratio between purple and green:

4 green = 3 purple

=> purple/green = 4/3

Finally, we can use the given information to find the ratio between red and purple:

5 purple = 2 red

=> red/purple = 5/2

To find the ratio between yellow and red, we can combine these ratios and simplify:

green/yellow = 6/5

=> yellow/green = 5/6

purple/green = 4/3

=> green/purple = 3/4

red/purple = 5/2

=> purple/red = 2/5

yellow/green * green/purple * purple/red = yellow/red

(5/6) * (3/4) * (2/5) = 1/2

Therefore, the ratio between yellow to red is 1 to 2 or 1:2. Answer: not listed.

To learn more about probability from the given link:

https://brainly.com/question/30034780

#SPJ1

the total cost of the car rental for Nate if he rents a compact car with the optional insurance and fills up the gas tank before returning the car would be $[tex]570.[/tex]

To calculate the total cost of the car rental, we need to first determine the rental rate for a compact car for 8 days, including the optional insurance.

The daily rental rate for a compact car is $ [tex]56,[/tex] and the optional insurance costs $10 per day. Therefore, the total daily cost of renting a compact car with insurance is:

[tex]56 + 10 = 66[/tex]

To determine the total cost of renting the compact car for 8 days, we simply multiply the daily cost by the number of days:

[tex]66 \times 8 = $528[/tex]

Next, we need to determine the cost of gasoline if Nate returns the car without a full tank. The gasoline charge is $ [tex]3.50[/tex] per gallon, but we don't know how many gallons Nate will need to fill up the tank.

If we assume that a compact car has a gas tank capacity of around 12 gallons, and that Nate will need to refill the tank to its full capacity, then the gasoline charge would be:

$[tex]3.50 \times 12 = $42[/tex]

Finally, we can calculate the total cost of the rental, including the optional insurance and the gasoline charge if Nate returns the car without a full tank:

$[tex]528 + $42 = $570[/tex]

Therefore, the total cost of the car rental for Nate if he rents a compact car with the optional insurance and fills up the gas tank before returning the car would be $[tex]570[/tex].

Learn more about cost here:

https://brainly.com/question/30045916

#SPJ1

Answer:

Ten times greater

Step-by-step explanation:

700 x 10 = 7000

Answer:

it will be ten times greater

Step-by-step explanation:

Answer:

7 batches

hope this helps

Step-by-step explanation:

1 n (batches of dumpling wrappers) = 3 cups flour

n = 21 / 3

n = 7

The chef can make 7 batches of dumpling wrappers :D.

Answer:

Step-by-step explanation:

just add the two numbers up 576x1 1/2= 864

The probability of choosing 5 CDs in alphabetical order out of a collection of 23 CDs is approximately 0.00003 or 0.003%.

What is combination?

In mathematics, a combination is a way of selecting objects from a larger group of objects, where the order of selection is not important. A combination is a subset of objects that are chosen from a larger set without regard to the order in which they are selected.

The formula  is given by:

C(n, r) = [tex]\frac{n!}{r!* (n - r)!}[/tex]

The total number of ways to choose 5 CDs from a collection of 23 CDs is given by the combination formula:

C(23, 5) = [tex]\frac{23!}{5!* (23 - 5)!}[/tex]

             = 33649

This means there are 33649 different ways to arrange 5 CDs out of the 23 CDs.

Out of these 33649 ways, only one arrangement is alphabetical. For this to happen, the first CD chosen must be the first one alphabetically, the second CD chosen must be the second one alphabetically, and so on.

The first CD can be any of the 23 CDs. However, once the first CD is chosen, there is only one CD that can be the second one alphabetically, two CDs that can be the third one alphabetically, and so on. Therefore, the probability of choosing 5 CDs in alphabetical order is:

P = 1 / C(23, 5)

P = 1 / 33649

P ≈ 0.00003

So the probability of choosing 5 CDs in alphabetical order out of a collection of 23 CDs is approximately 0.00003 or 0.003%.

To learn more about combination visit the link:

https://brainly.com/question/11732255

#SPJ1

Therefore, the graph of the given set is: closed circles on 1 and 4 with a line segment between.

A common form for an algebraic expression is one of the following: addition, subtraction, multiplication, or division. Simplify the values to determine the result.

The expression (x I x ≤ 1) U (x I x ≥ 24) represents the set of all values of x that are less than or equal to 1 or greater than or equal to 24.

the graph of this set will have a closed circle at x=1 and a closed circle at x=24

The arrows pointing outward indicate that the set continues indefinitely in both directions.

To know more about line segment visit:-

https://brainly.com/question/30072605

#SPJ1