A financial adviser recommends that a client deposit $4,500 into a fund that earns 8. 5% annual interest compounded monthly What is the interest rate per month? (Give an exact answer. )

r= 0. 6821 Find an exponential growth model for A, the value in dollars) of the account after years.

A = 0. 6821 What will be the value (in dollars) of the investment after 7 years? Round to the nearest cent.

$

The price at which the demand drops to 584 units is $20.80 per unit.

The formula given is:

D = 1000 - 20P

To find the price at which the demand drops to 584 units, we can set D equal to 584 and solve for P:

584 = 1000 - 20P

20P = 1000 - 584

20P = 416

P = 416/20

P = 20.8

Therefore, the price at which the demand drops to 584 units is $20.80 per unit.

Learn more about :

demand : brainly.com/question/28098072

#SPJ11

The that Reflecting a point across an axis simply involves negating the applicable  match while keeping the other Coordinate the same.The correct answer is( A)(- 5, 9).  

To reflect a point across the y- axis, we simply negate the x-coordinate while keeping the y-  match the same. thus, the reflection of the point( 5, 9) across the y- axis is(- 5, 9).  

The correct answer is( A)(- 5, 9).  Option( B)( 5,-9) represents a reflection across the x-axis, where the y-  match is negated while keeping the x-coordinate the same. Option( C)(- 5,-9) represents a point that's reflected across both the x-axis and the y- axis, performing in a point in the third quadrant.

Option( D)( 5, 9) represents the original point and not its reflection across the y- axis.  It's important to flash back  that reflecting a point across an axis simply involves negating the applicable  match while keeping the other coordinate the same.

To learn more about Coordinate .

https://brainly.com/question/31159105

#SPJ11

The best-predicted linear regression for the correlation between IQ scores and GPA would involve fitting a line to the data points that minimizes the sum of squared errors between the predicted and actual values.

Linear regression is a statistical technique used to model the relationship between two variables. In this case, IQ score is the predictor or independent variable, and GPA is the response or dependent variable. The goal of linear regression is to find the best line that describes the relationship between these two variables.

To determine the best-fit line, we use a method called least squares regression, which minimizes the sum of the squared errors between the predicted and actual values. The equation for the best-fit line is Y = b0 + b1*X, where Y is the predicted value of GPA, X is the observed value of IQ score, b0 is the intercept or Y-intercept, and b1 is the slope of the line.

Once we have calculated the values of b0 and b1, we can use the equation to predict the GPA of a student based on their IQ score. The predicted GPA value will be the Y value on the line that corresponds to the X value of the student's IQ score.

It's important to note that linear regression assumes a linear relationship between the two variables and that the relationship is not influenced by any other factors. Additionally, it's important to consider the reliability and validity of the measures used to assess IQ score and GPA, as well as any potential confounding variables that may affect the relationship between the two variables.

Learn more about correlation here: brainly.com/question/30116167

#SPJ11

Daniel will have 12 chocolates remaining after 8 days

If Daniel eats 3 chocolates each day, then he will eat a total of

3 chocolates × 8 days = 24 chocolates in 8 days.

To find the number of chocolates he will have remaining after 8 days, we subtract the number of chocolates he eats from the original number of chocolates he was given.

So, 36 chocolates − 24 chocolates = 12 chocolates.

Therefore, Daniel will have 12 chocolates remaining after 8 days. This means that he can continue to enjoy the remaining chocolates over the next few days or share them with friends and family.

Learn more about Subtraction here

https://brainly.com/question/2346316

#SPJ4

Answer:

Y2=m(X2-X1)+Y1

Step-by-step explanation:

The unit vector in the direction opposite to v = (3, 2) is (-3/√13, -2/√13), and the components of PQ are (-1, 5).

Let's first find the unit vector in the direction opposite to v = (3,2). To do this, we will first find the negative of vector v, and then calculate its unit vector.
Negative of v = (-3,-2)
Now, let's find the magnitude of this new vector:
Magnitude = √((-3)^2 + (-2)^2) = √(9 + 4) = √13
Next, we'll find the unit vector by dividing each component by the magnitude:
Unit vector = (-3/√13, -2/√13)
Now, let's move on to finding the components of PQ. Given that P = (-4, -3) and Q = (-5, 2), we can calculate PQ as follows:
PQ = Q - P = (-5 - (-4), 2 - (-3)) = (-1, 5)
So, the unit vector in the direction opposite to v = (3, 2) is (-3/√13, -2/√13), and the components of PQ are (-1, 5).

Learn more about magnitude here:

https://brainly.com/question/2596740

#SPJ11

The cutoff score to be in the bottom 6% of all ACT math scores is about 27.71. To find the cutoff score to be in the bottom 6% of all ACT math scores, we need to use the normal distribution table.

First, we need to convert the score to a z-score using the formula: z = (x - μ) / σ, where x is the score, μ is the mean, and σ is the standard deviation.
For the bottom 6% of scores, we need to find the z-score that corresponds to a cumulative probability of 0.06. Looking at the normal distribution table, we find that the closest value is 1.55.
So, we can solve for the score by rearranging the formula as x = z * σ + μ. Plugging in the values, we get:
x = 1.55 * 5.75 + 18.5 = 27.7125
It's important to note that this calculation is based on the assumption that the distribution of ACT math scores follows the normal model with a mean of about 18.5 and a standard deviation of about 5.75. In reality, the distribution may not be exactly normal, and the mean and standard deviation may vary depending on the sample of test takers.

To learn more about standard deviation refer:-

https://brainly.com/question/29115611

#SPJ11

Therefore, The equation (x-7)^2 y^2 = 49 in polar coordinates is r^2 - 14r cos(theta) + 49 = 0.

To convert the equation (x-7)^2 y^2 = 49 to polar coordinates, we replace x with r cos(theta) and y with r sin(theta). This gives us (r cos(theta) - 7)^2 (r sin(theta))^2 = 49. Simplifying this equation, we get r^2 - 14r cos(theta) + 49 = 0. This is the equation in polar coordinates.

Therefore, The equation (x-7)^2 y^2 = 49 in polar coordinates is r^2 - 14r cos(theta) + 49 = 0.

To know more about equations visit:

https://brainly.com/question/22688504

#SPJ11

To find 4x4 nilpotent matrices of indices 2, 3, and 4, we can use the fact that a matrix A is nilpotent of index k if and only if A^k = 0, where 0 is the zero matrix.

For an n x n matrix A, a matrix is nilpotent of index k if and only if all eigenvalues of A are 0, and the Jordan form of A has only blocks of size less than k on the diagonal.

Therefore, to find 4x4 nilpotent matrices of indices 2, 3, and 4, we can look for matrices that have only eigenvalue 0 and Jordan form with blocks of size less than or equal to the index.

One example of a 4x4 nilpotent matrix of index 2 is:

A = [0 1 0 0; 0 0 0 0; 0 0 0 1; 0 0 0 0]

Here, A^2 = 0, and the Jordan form of A has one Jordan block of size 2.

An example of a 4x4 nilpotent matrix of index 3 is:

B = [0 1 0 0; 0 0 1 0; 0 0 0 0; 0 0 0 0]

Here, B^3 = 0, and the Jordan form of B has one Jordan block of size 3.

An example of a 4x4 nilpotent matrix of index 4 is:

C = [0 1 0 0; 0 0 1 0; 0 0 0 1; 0 0 0 0]

Here, C^4 = 0, and the Jordan form of C has one Jordan block of size 4.

Therefore, these matrices are examples of 4x4 nilpotent matrices of indices 2, 3, and 4.

To learn more about eigenvalues click here: brainly.com/question/16945116

#SPJ11

The model of the rectangle having length 16 cm and width 4 cm or  length 4, width 16.

Perimeter of the rectangle = 40 centimeters

Area of the rectangle = 64 square centimeters

Using the formulas for the perimeter and area of a rectangle,

Perimeter = 2(length + width)

Area = length x width

Use these formulas to solve for the length and width of the rectangle,

and then check if any of the given models match those dimensions.

Let L be the length and W be the width of the rectangle.

From the first equation, we have,

Perimeter = 2(L + W)

⇒2(L + W) = 40

⇒ L + W = 20

From the second equation, we have,

Area = L x W

⇒L x W = 64

Solve for one variable in terms of the other and substitute it into the other equation.

⇒ L = 64/W

Substituting this expression into the first equation, we get,

⇒ (64/W) + W = 20

Multiplying both sides by W, we get,

⇒ 64 + W² = 20W

Rearranging, we get,

⇒ W²- 20W + 64 = 0

⇒W²- 16W -4W + 64 = 0

⇒ (W - 16 ) ( W -4 ) = 0

⇒ W = 16 or W = 4

If W = 16,

then L = 64/W

           = 4,

so we have a rectangle with sides of length 4, width 16

If W = 4,

then L = 64/W

= 64/4 = 16, which gives a rectangle with length 16 and width 4.

Therefore, model of the rectangle has dimensions of length 16 cm and width 4 cm or  length 4, width 16.

Learn more about rectangle here

brainly.com/question/30188986

#SPJ4

Answer:

Hey there Vivi

Step-by-step explanation:

The probability of both watermelons being green can be calculated by dividing the number of favorable outcomes (both watermelons being green) by the total number of possible outcomes (any two watermelons chosen).

Kyle has 28 green watermelons out of a total of 47 watermelons. After eating one watermelon today, there will be 46 watermelons left, with 27 of them being green. Tomorrow, after eating one more watermelon, there will be 45 watermelons left, with 26 of them being green.

The probability of both watermelons being green is therefore (27/46) * (26/45) = 0.35.

Therefore, the correct option is 0.35.

When examining group differences with a specified direction, a one-tailed test is used i.e., option b is correct.

In statistical hypothesis testing, researchers often have a specific direction in mind when comparing two groups.

For example, they may hypothesize that Group A performs better than Group B or that Group A has a higher mean than Group B. In such cases, a one-tailed test is appropriate.

A one-tailed test is designed to detect differences in a specific direction. It focuses on evaluating whether the observed data significantly deviates from the null hypothesis in the specified direction.

The null hypothesis assumes no difference or no relationship between the groups being compared.

In a one-tailed test, the critical region is defined on only one side of the distribution, corresponding to the specified direction of the difference.

The critical value, which determines whether the observed difference is statistically significant, is chosen based on the desired level of significance (e.g., alpha = 0.05).

On the other hand, a two-tailed test is used when the direction of the difference is not specified, and the researchers are interested in determining whether there is a significant difference between the groups in either direction.

In this case, the critical region is divided equally between the two tails of the distribution.

A directional hypothesis (option C) is a statement that specifies the expected direction of the difference, but it is not the statistical test itself. The critical value (option D) is the value used to determine the cutoff for rejecting or accepting the null hypothesis.

Therefore, when examining group differences with a specified direction, a one-tailed test is used to assess the statistical significance of the observed difference in that particular direction.

Learn more about one-tailed test here:

https://brainly.com/question/31327677

#SPJ11

If interest rates suddenly decline, existing bonds that have a call feature are more likely to be called.

A call feature is a provision in a bond that allows the issuer to redeem the bond before its maturity date. When interest rates decline, issuers can typically issue new bonds with lower coupon rates, which reduces their interest expense. In this situation, the issuer may choose to call the existing bonds with higher coupon rates to refinance their debt at a lower cost.

When interest rates decline, the market value of existing bonds with higher coupon rates increases because they offer a higher yield than newly issued bonds with lower coupon rates. This means that issuers have an incentive to call these bonds and refinance them at a lower cost. As a result, existing bonds that have a call feature are more likely to be called when interest rates decline.

Therefore, the correct answer is a) decline; more. If interest rates increase, issuers are less likely to call their existing bonds because they would have to issue new bonds with higher coupon rates, which would increase their interest expense. If interest rates remain stable, the call probability of existing bonds will depend on other factors such as the issuer's financial condition and the bond's call protection provisions.

To learn more about rate click here: brainly.com/question/14731228

#SPJ11

Both tanks will hold the same amount of water in 6 hours.

Let's assume that after "x" hours, both tanks will hold the same amount of water.

The amount of water in gallons after "x" hours can be calculated as:

Amount of water in Tank A = Initial amount + Rate * Time

Amount of water in Tank A = 300 + 5x

The amount of water in gallons after "x" hours can be calculated as:

Amount of water in Tank B = Initial amount - Rate * Time

Amount of water in Tank B = 348 - 3x

Since we want both tanks to hold the same amount of water, we can set up the equation:

300 + 5x = 348 - 3x

To solve for "x," we can combine like terms and isolate the variable:

5x + 3x = 348 - 300

8x = 48

x = 48 / 8

x = 6

Therefore, after 6 hours, both Tank A and Tank B will hold the same amount of water.

Learn more on proportions ; https://brainly.com/question/29133548

#SPJ9

The test statistic is approximately 7471.77  the F-value, which is the ratio of the between-treatments mean square to the error mean square.

The degrees of freedom for the between-treatments source of variation are 4, and the mean square is calculated by dividing the sum of squares by the degrees of freedom:

Mean square between treatments = 2,073.6 / 4 = 518.4

The degrees of freedom for the error source of variation are 288, and the mean square is calculated by dividing the error sum of squares by the degrees of freedom .Mean square error = 20 / 288 = 0.0694

The F-value is calculated by dividing the mean square between treatments by the mean square error:

F = 518.4 / 0.0694 = 7474.4

The F-value is very large, indicating that the between-treatments variation is much larger than the error variation. To test the null hypothesis, we compare the F-value to the critical F-value at the desired significance level and degrees of freedom.

Since we are not given a significance level, we cannot determine the critical F-value. Therefore, we cannot determine the test statistic or the c

Sum of Squares (SS) = 2,073.6,Degrees of Freedom (def.) = 4

Mean Square (MS) = SS / def. = 2,073.6 / 4 = 518.4,SS = 20

def. = 288,MS = SS / def. = 20 / 288 = 0.0694

To compute the test statistic, we divide the "between treatments" mean square by the error mean square:

Test Statistic = MS (between treatments) / MS (error) = 518.4 / 0.0694 ≈ 7471.77.

The F-value is very large, indicating that the between-treatments variation is much larger than the error variation. To test the null hypothesis, we compare the F-value to the critical F-value at the desired significance level and degrees of freedom.

To know more about statistic here

https://brainly.com/question/31443166

#SPJ4

Answer:

Step-by-step explanation: I think number C

The derivatives of the functions are:

To find the derivative of y = (4x⁴ - 5)(- x⁴ + x² + 2), use the product rule:

y' = (4x⁴ - 5)(-4x³ + 2x) + (16x³)(-x⁴ + x² + 2)

= -16x⁷ + 8x⁵ + 40x³ - 20x³ - 32x³ + 16x

= -16x⁷ + 8x⁵ - 12x³ + 16x

Therefore, y' = -16x⁷ + 8x⁵ - 12x³ + 16x.

To find the derivative of y = (x⁴ + 4x² - 4)/(2x³ - 4), use the quotient rule:

y' = [(4x³ + 8x)/(2x³ - 4)] - [(x⁴ + 4x² - 4)(6x²)]/(2x³ - 4)²

Simplifying the numerator and denominator in the first term gives:

y' = [4x(x² + 2)]/(2x³ - 4) - [(x⁴ + 4x² - 4)(6x²)]/(2x³ - 4)²

Combining the terms under a common denominator gives:

y' = [4x(x² + 2) - (x⁴ + 4x² - 4)(6x²)]/(2x³ - 4)²

Expanding the numerator gives:

y' = [-6x⁶ - 12x⁴ + 4x - 8]/(2x³ - 4)²

Simplifying the numerator by factoring out -2 gives:

y' = [3x⁶ + 6x⁴ - 2x + 4]/(x³ - 2)²

Therefore, y' = [3x⁶ + 6x⁴ - 2x + 4]/(x³ - 2)².

Find out more on derivative here: https://brainly.com/question/28376218

#SPJ1

The area of the shaded region is 113.04 square yards in the ring

The formula to calculate the area of a circle is:

Area = π × (radius²)

For the outer circle:

Area of outer circle = π × (10 yd)² = π100 yd²

For the inner circle:

Area of inner circle = π × (8 yd)^2 = π × 64 yd²

To find the area of the shaded region

we subtract the area of the inner circle from the area of the outer circle:

Area of shaded region = Area of outer circle - Area of inner circle

Area of shaded region = π × 100 yd² - π ×64 yd²

Area of shaded region = π × (100 yd²- 64 yd²

Area of shaded region = π × 36 yd²

Area of shaded region = 3.14 × 36 yd²

Area of shaded region = 113.04 yd^2

Therefore, the area of the shaded region is 113.04 square yards.

To learn more on Circles click:

https://brainly.com/question/11833983

#SPJ1

The equation is dy/dx = 5yx, for x > 0.The solution to the given differential equation is y(x) = C2 * e^((5/2)x^2), where C2 is a constant determined by the initial conditions. we can replace e^C with another constant, say A. Therefore, this solution to the given differential equation .

The equation is dy/dx = 5yx, for x > 0.

Integrating both sides, we get:

ln |y| = 5ln |x| + C

Where C is the constant of integration. Solving for y, we get:

y(x) = e^(5ln|x|+C)

y(x) = e^C * x^5

Since x>0, we can replace e^C with another constant, say A. Therefore, the solution to the given differential equation is:

y(x) = Ax^5

where A is a constant.

Step 1: Recognize that this is a first-order separable differential equation. We can rewrite the equation as (1/y) dy = 5x dx.

Step 2: Integrate both sides of the equation. We'll have:

∫ (1/y) dy = ∫ 5x dx

Step 3: Perform the integration:

ln|y| = (5/2)x^2 + C1, where C1 is the constant of integration.

Step 4: Solve for y:

y(x) = e^((5/2)x^2 + C1)

Step 5: Introduce another constant C2 to simplify the equation:

y(x) = C2 * e^((5/2)x^2), where C2 = e^C1.

The solution to the given differential equation is y(x) = C2 * e^((5/2)x^2), where C2 is a constant determined by the initial conditions.

Learn more about differential equation here:

brainly.com/question/25731911

#SPJ11

The least possible measure of ∠ADC is 1 degree, and the greatest possible measure of ∠ADC is 178 degrees.

To find the least possible measure of ∠ADC, we need to start with the smallest possible measure of ∠ADB and ∠BDC, which is 1 degree. In this case, the sum of the measures of ∠ADB and ∠BDC is 2 degrees, so the measure of ∠ADC must be 178 degrees.

To find the greatest possible measure of ∠ADC, we need to start with the largest possible measure of ∠ADB and ∠BDC, which is 89 degrees. In this case, the sum of the measures of ∠ADB and ∠BDC is 178 degrees, so the measure of ∠ADC must be 2 degrees.

Learn more about  Least Possible Measure here: brainly.com/question/1567317

#SPJ11

(a) Null hypothesis: mean life of refrigerators <= 15 years, alternative hypothesis: mean life of refrigerators > 15 years. (b) Null hypothesis: mean life of refrigerators >= 15 years, alternative hypothesis: mean life of refrigerators < 15 years.

What is Null hypothesis?

Null hypothesis (H0) is a statistical hypothesis that states there is no significant difference or relationship between the population parameter and the sample statistic being tested, or no effect of the treatment or intervention being evaluated. It is usually the hypothesis that is initially assumed to be true before the statistical test or experiment is conducted, and is compared against the alternative hypothesis to determine whether the results are statistically significant.

(a) If you represent the manufacturer and want to support the claim that the mean life of its refrigerators is greater than 15 years, the null hypothesis would be:

Null hypothesis (H0): The mean life of the refrigerators is less than or equal to 15 years.

Alternative hypothesis (Ha): The mean life of the refrigerators is greater than 15 years.

(b) If you represent the competitor and want to reject the claim that the mean life of the manufacturer's refrigerators is greater than 15 years, the null hypothesis would be:

Null hypothesis (H0): The mean life of the refrigerators is equal to or greater than 15 years.

Alternative hypothesis (Ha): The mean life of the refrigerators is less than 15 years.

To know more about Null hypothesis. visit:

https://brainly.com/question/4436370

#SPJ4

Answer:

Step-by-step explanation:

you have to divided you would be subtarct i would gove you 5

The ratio of 12-year-olds to 13-year-olds in Mr. Wu's class is 5:3

The ratio of 12-year-olds to 13-year-olds in Mr. Wu's class is 5:3, which means that there are 5 parts out of 8 that are 12-year-olds and 3 parts out of 8 that are 13-year-olds.

If there are 24 students in the class, then there are 24 x 3/8 = 9 13-year-olds in the class.

The ratio of 12-year-olds to 13-year-olds in Mr. Wu's class is 5:3. There are 24 students in the class, so there are 9 13-year-olds.

Read more about ratio here:

https://brainly.com/question/13513438

#SPJ2

4 units is the value of the x for the given secant.

From the two-secant theorem,

⇒a(a+b)=c(c+d)

or in given terminology,

[tex]\frac{VW}{VT} =\frac{VU}{VQ}[/tex]

In the given case,

VW =9

VQ =9+15 = 24

VU = 8

VT = 5x-1+8=5x+7

Thus the ratio,

9*24=8*(5x+7)

5x+7=27

5x=20

x=4

therefore, the value of the x for the given secant is 4 units.

Learn more about secants here:

https://brainly.com/question/23026602

#SPJ1

(a) $$(4.7 \times 10^5) \cdot (2.9 \times 10^4)$$

To multiply these numbers, we multiply the coefficients and add the exponents:

$$(4.7 \cdot 2.9) \times 10^{5+4} = 13.63 \times 10^9$$

The answer in scientific notation is $$1.363 \times 10^{10}$$.[tex][/tex]

(b) $$\frac{5.8 \times 10^3}{2 \times 10^8}$$

To divide these numbers, we divide the coefficients and subtract the exponents:

$$\frac{5.8}{2} \times 10^{3-8} = 2.9 \times 10^{-5}$$

The answer in scientific notation is $$2.9 \times 10^{-5}$$.

(c) $$(1.5 \times 10^3) + 2491$$

To add these numbers, we keep the larger exponent and add the coefficients:

$$1.5 \times 10^3 + 2491 = 1.5 \times 10^3 + 2.491 \times 10^3 = 3.991 \times 10^3$$

The answer in scientific notation is $$3.991 \times 10^3$$.

(d) $$0.0005 - 1.5 \times 10^{-4}$$

To subtract these numbers, we keep the larger exponent and subtract the coefficients:

$$0.0005 - 1.5 \times 10^{-4} = 0.0005 - 0.00015 = 0.00035$$

The answer is $0.00035$

The code initialises a dictionary with key-value pairs {1: 'x', 2: 'y', 3: 'z'}. The output of the given code is "y".Then it uses the get() method to retrieve the value of the key 2 from the dictionary.

The required output of the given code, which includes "dict = {1: 'x', 2: 'y', 3: 'z'}" and "print(dict.get(2, 'a'))", will be 'y'. The output of the given code is "y".This is because the "get" method retrieves the value associated with the key '2', which is 'y' in the provided dictionary. The arranging of phrases and words to create good sentences is known as syntax. The most fundamental syntax uses the formula subject + action + direct object. Jillian "struck the ball," in other words. We can comprehend that we wouldn't write, "Hit Jillian the ball," thanks to syntax. The arrangement of words in units like phrases, clauses, and sentences is referred to as syntax.

Learn more about code here:

https://brainly.com/question/17204194

#SPJ11

The value of 161200000000000000000007 mod 13 is 9.

To calculate the value of a large number mod a smaller number, we can use the following property: (a + b) mod n = (a mod n + b mod n) mod n. We can apply this property repeatedly to simplify the calculation. In this case, we can write:

161200000000000000000007 = 161 * 10^21 + 2 * 10^2 + 7

= (161 * 10^21 mod 13 + 2 * 10^2 mod 13 + 7 mod 13) mod 13

= (3 * 1 + 2 * 3 + 7) mod 13

= 9 mod 13

= 9

Therefore, the value of 161200000000000000000007 mod 13 is 9.

This calculation shows how to use modular arithmetic to perform computations with very large numbers and obtain their remainders when divided by a smaller number.

To learn more about modular arithmetic click here

brainly.com/question/29022762

#SPJ11

The fraction of the area of circle T occupied by sector BTC is S / (2π).

To find the fraction of the area of circle T that is occupied by sector BTC, we need to calculate the ratio of the area of sector BTC to the total area of circle T.

The total area of a circle is given by the formula A = πr², where r is the radius of the circle.

The area of sector BTC is a fraction of the total area of the circle, and this fraction is determined by the central angle of the sector, which is measured in radians. Let's call this central angle θ.

The formula to calculate the area of a sector is A_sector = (θ/2π) * πr², where θ is the central angle in radians.

In this case, we are given that the measure of BC (which is the same as the central angle θ) is S radians.

Therefore, the area of sector BTC is A_sector = (S/2π) * πr² = (S/2) * r².

The fraction of the area of circle T occupied by sector BTC is:

Fraction = (Area of sector BTC) / (Total area of circle T)

= ((S/2) * r²) / (πr²)

= S / (2π)

Hence, the fraction of the area of circle T occupied by sector BTC is S / (2π).

For such more questions on Sector BTC Area Fraction

https://brainly.com/question/30276019

#SPJ11

Answer:

1. Kelsey has to pay $200 to rent a booth at the craft fair. The materials for each  pendant cost $7.80, and she plans to sell each pendant for $13.50. To make  a profit, she must make more money than she spends. Kelsey has already  made 10 pendants.

So yes, her profit will be a lot more than the minimal of $50 asked in the question.

2. Kelsey must produce 34 more pendants.

Step-by-step explanation:

The angles formed by parallel lines a, b, and c, indicates that the correct option is the option C

C. x = 120, y = 70

Parallel lines are lines that that maintain a particular distance between each other, such that they have the same slope, and they do not meet, or intersect

The rays a, b, and c are parallel, therefore;

Angle x° and the 120° angle are corresponding angles;

x° = 120° (Corresponding angles formed between parallel lines are congruent)

The external angle theorem indicates;

x° = y° + 50°

Therefore, 120° = y° + 50° (Substitution property)

y° = 120° - 50° = 70°

The correct option is the option C. x = 120, y = 70

Learn more on the angles formed by parallel lines here: https://brainly.com/question/30090855

#SPJ1

If  a//b//c are parallel lines with a transversal passing through these line. Angle x= 120° and y = 70°.Option C

As far as parallel lines are concerned, Corresponding angles are equal when when a transversal passes through two parallel lines.  Alternate interior angles are equal too.

We can therefore say that x is 120°.

b is a straight line which is 180°

if x = 120 the remaining length of the diameter is 60°

Therefore to solve for y ⇒ 50° + 60° = 110°

The sum of the interior angles of a triangle is 180°

∴ 180° - 110° = 70

y = 70°

Find more exercises on angles;

https://brainly.com/question/17039091

#SPJ1