a -foot-long footbridge has two diagonal supports that meet in the center of the bridge. each support makes a angle with a short vertical support. a diagram shows the footbridge, the diagonal supports and the vertical supports create two right triangles. at the top of the diagram a horizontal line is shown and labeled 20 feet. the two right triangles are shown below this horizontal line.the two longest legs of both right triangles touch at the center of the footbridge.the shortest leg of both right triangles represents the vertical support on each end of the footbridge. the hypotenuse of both right triangles form the diagonal supports that meet at the center of the footbridge. the full length of the footbridge is 20 feet. the vertical supports are not labeled. each diagonal support is labeled x. a 65-degree-angle is formed between the short vertical support and the diagonal support on each end of the bridge. what is the length x of a diagonal support, to the nearest tenth of a foot?

Using the law of sines, the value of the indicated side x, is calculated to one decimal place as: 125.3.

The Law of Sines is a trigonometric formula used to relate the side lengths and angles of any triangle. It states that the ratio of the length of a side of a triangle to the sine of the angle opposite that side is equal for all three sides of the triangle. Mathematically, this can be represented as:

sin A/a = sin B/b = sin C/c

Thus, we have:

C = 180 - 102 - 28 = 50°

a = 160

A = 102°

c = x = ?

Applying the law of sines, we have:

sin 102/160 = sin 50/x

Cross multiply:

x = sin 50 * 160 / sin 102

x ≈ 125.3

Learn more about the law of sines on:

https://brainly.com/question/28992591

#SPJ1

The critical value of the chi-square distribution corresponding to a sample size of 5 and a confidence level of 98% is given as follows:

0.297 and 13.277.

To obtain a critical value, we need three parameters, given as follows:

Then, with the parameters, the critical value is found using a calculator.

The parameters for this problem are given as follows:

Using a chi-square distribution calculator, the critical values are given as follows:

0.297 and 13.277.

More can be learned about the chi-square distribution at https://brainly.com/question/4543358

#SPJ1

where t is measured in days, and A(t) represents the amount of flooded land at time t. This function has a B-value of -0.3118.

To model the situation of the flood, we can use an exponential decay function, which represents the decreasing amount of flooded land over time. The function can be written as:

[tex]A(t) = A0 * e^{(-kt)}[/tex]

where A(t) is the amount of flooded land at time t, A0 is the initial amount of flooded land, k is a constant representing the rate of decay, and e is the mathematical constant approximately equal to 2.718.

To determine the value of k, we can use the given information that after 2 days, only 3375 acres of land were under water. Substituting t = 2 and A(t) = 3375 into the equation above, we get:

[tex]3375 = A0 * e^{(-2k)[/tex]

We also know that initially, there were 6000 acres of land under water. Substituting A0 = 6000 into the equation above, we get:

Dividing both sides by 6000, we get:

ln(0.5625) = -2k[tex]ln(0.5625) = -2k[/tex]

Taking the natural logarithm of both sides, we get:

[tex]ln(0.5625) = -2k[/tex]

Solving for k, we get:

[tex]k = -ln(0.5625)/2[/tex]

k ≈ 0.3118

Therefore, the function to model the situation of the flood is:

[tex]A(t) = 6000 * e^{(-0.3118t)}[/tex]

To learn more about function, visit

https://brainly.com/question/12431044

#SPJ1

The only statement that is true is b, which states that the quadrilateral is a rectangle.

A quadrilateral is a polygon with four sides and four vertices. The sum of the interior angles of a quadrilateral is always 360 degrees. Quadrilaterals can have sides of different lengths and angles of different measures, giving rise to many different types of quadrilaterals with different properties.

First, we find the lengths of the sides of the quadrilateral:

AB = √[(7-6)² + (-1+4)²] = √10

BC = √[(4-7)² + (0-0)²] = 3

CD = √[(3-4)² + (-3+0)²] = √10

AD = √[(6-3)² + (-4+1)²] = √26

Then, we find the slopes of each pair of opposite sides:

AB: (7-6)/(−1+4) = 1/3

BC: (4-0)/(0-(-1)) = 4/1 = 4

CD: (-3-(-4))/(0-(-3)) = 1/3

AD: (6-3)/(-4-(-1)) = -1/5

Now we can analyze each statement:

a.) Rhombus

A rhombus is a quadrilateral with all sides of equal length. We found that AB = CD and AD ≠ BC, so not all sides are of equal length. Therefore, statement a is false.

b.) Rectangle

A rectangle is a quadrilateral with all angles equal to 90 degrees. We can find the slopes of adjacent sides and check if they are opposite reciprocals:

AB: 1/3

BC: 4

CD: 1/3

AD: -1/5

We can see that AB and CD have slopes of 1/3 and are opposite reciprocals, and BC and AD have slopes of 4 and -1/5, respectively, and are also opposite reciprocals. Therefore, all angles of the quadrilateral are 90 degrees. Also, since AB = CD and AD ≠ BC, the quadrilateral is a rectangle. Therefore, statement b is true.

c.) Square

A square is a special type of rectangle with all sides of equal length. We found that AB ≠ AD, so not all sides are of equal length. Therefore, statement c is false.

d.) None

We have determined that the quadrilateral is a rectangle, so it is not "none". Therefore, statement d is false.

Therefore, the only statement that is true is b, which states that the quadrilateral is a rectangle.

To know more about the quadrilateral and rectangle visit:

brainly.com/question/11936810

#SPJ1

Answer:

Step-by-step explanation:

You want to know if the fractions (2 1/2)/(6.5) and (5/8)/(1 5/8) are in a proportional relationship, and the simplest form of each.

Equivalent fractions can be found by multiplying numerator and denominator by the same number.

  (2 1/2)/(6.5) = 2·(2 1/2)/(2·6.5) = 5/13

  (5/8)/(1 5/8) = 8(5/8)/(8·(1 5/8)) = 5/(8+5) = 5/13

Both fractions are equivalent to 5/13, so their relationship is proportional.

Answer:

The answer is B ([tex]x=\frac{6}{5}[/tex])

Step-by-step explanation:

We start with creating labels for the shapes that represent what they value -at first I tried multiplying the 5x by 4 but there wasn't an answer for that.

[tex]5x+4=10[/tex]

First we just simplify,

[tex]5x (-4)=10(-4)[/tex]

[tex]5x=6[/tex]

then divide,

[tex]\frac{5x}{5} =\frac{6}{5}[/tex]

and we end up with:

[tex]x=\frac{6}{5}[/tex]

or

B

Answer:

19.5625

Step-by-step explanation:

Add up all of the x's (treating each place where an x is as if it's a number -- eg, there's twonumber 12's)

12+12+15+15+15+15+16+18+20+20+22+25+25+25+29 = 313

Divide by the number of x's

313 / 16 = 19.5625

Thus, the on average the contents weight for the transatlantic shipping is found as  24.7  pounds.

Given dimension of rectangular prism

Length l = 4ft

width w = 9.5 ft

height h = 13 ft

Volume of rectangular prism = l*w*h

V = 4*9.5*13

V = 494 ft³

Now,

1  ft³ = 0.05 pounds

So,

weight of  494 ft³ =  494*0.05 pounds

weight of 494 ft³ =  24.7  pounds

Thus, the on average the contents weigh for the transatlantic shipping is found as  24.7  pounds.

know more about the rectangular prism

https://brainly.com/question/24284033

#SPJ1

Answer:

Step-by-step explanation:

Principal = 17,525. Rate = 1/2% = 0.005 time,t = 3

Interest, I = principal x rate x time

Interest, I = 17525 x 0.005 x 3

Interest, I = $262.875

No, the ratio of circumference to radius is not the same for every circle.

Ratio refers to the quantitative relation between two or more values, typically expressed in the form of a fraction or a proportion.

No, the ratio of circumference to radius is not the same for every circle. The ratio of circumference to diameter, also known as pi (π), is a constant value that remains the same for every circle. It is approximately equal to 3.14 or 22/7. However, the ratio of circumference to radius varies depending on the size of the circle.

The formula for circumference of a circle is C=2πr, where C is the circumference and r is the radius. Therefore, the ratio of circumference to radius is C/r = 2π. This means that for circles of different sizes, the ratio of circumference to radius will differ since the value of pi remains the same while the radius changes.

For example, if we consider two circles, one with a radius of 2 cm and the other with a radius of 4 cm, the ratio of circumference to radius for the first circle will be 2π (since C = 2πr = 2π x 2 = 4π) and for the second circle, it will be 2π (since C = 2πr = 2π x 4 = 8π). Thus, the ratio of circumference to radius is not the same for every circle.

To know more about ratio visit:

https://brainly.com/question/12024093

#SPJ1

The correct statement is that a fairly strong negative linear relationship exists between the x and y variables.

The correlation coefficient is a measure of the strength and direction of the linear relationship between two variables. It ranges from -1 to 1, where a value of -1 indicates a perfect negative correlation, 0 indicates no correlation, and 1 indicates a perfect positive correlation.

In this case, the correlation coefficient is -0.88, which indicates a strong negative linear relationship between the x and y variables. This means that as the value of x increases, the value of y decreases in a predictable manner.

The negative sign of the correlation coefficient indicates that the relationship is negative, meaning that as one variable increases, the other variable tends to decrease. The absolute value of the correlation coefficient, 0.88, indicates a strong relationship, meaning that the values of the two variables are closely related and can be used to predict each other's values.

Therefore, the correct statement is that a fairly strong negative linear relationship exists between the x and y variables.

Learn more about correlation coefficient

brainly.com/question/15577278

#SPJ11

The probability that the golfer will hit at least 6 times in his next 10 attempts is A. 20 %

To estimate the probability of the golfer hitting at least 6 times in his next 10 attempts using a table of random numbers, we can perform a simulation.

Let's use the given table of random numbers to simulate 10 attempts for each trial. We can consider each pair of digits as one attempt. We will perform 10 trials and count how many times the golfer hits at least 6 times in 10 attempts.

Now count the number of trials with at least 6 hits:

Trial 2, Trial 5, and Trial 9 have at least 6 hits. That's 3 out of 10 trials.

To estimate the probability, divide the number of successful trials (at least 6 hits) by the total number of trials:

Probability = (Number of successful trials) / (Total number of trials)

Probability = 3 / 10 = 0.3

The estimated probability that the golfer will hit at least 6 times in his next 10 attempts is 30%. There is no exact match among the possible answers, but the closest one is 20%.

Find out more on probability at https://brainly.com/question/30618573

#SPJ1

Yes, this would be a valid matched pair test. In a matched pair test, two samples are taken from the same group or individual, and the samples are matched on some criteria such as age, sex, or in this case, location in the glass of water.

The researcher is using a matched pair test, which is an acceptable method to account for individual variations and boost the statistical power of the test, by collecting samples from the top and bottom of the glass of water and matching them according to the position. Due to the fact that any additional changes (such as in the source of the water or pollution) should be uniformly distributed across the two groups, this design also enables the researcher to ascertain whether there is a substantial difference in zinc levels between the top and bottom of the glass of water.

A paired t-test will be used to conduct the test in order to see if there is a significant difference between the zinc levels at the top and bottom of the water glass.

To learn more about matched pair test, refer to:

https://brainly.com/question/14690592

#SPJ4

The length from point A to point B on the clock is approximately 24.083 cm, which is closest to 24 cm. This is calculated using the Pythagorean theorem.

Using the Pythagorean theorem, we can calculate the length from point A to point B as follows

First, we need to find the length of the vertical line segment from point D to point A. This is equal to the radius of the clock, which is 24 cm.

Next, we can find the length of the horizontal line segment from point D to point B. This is equal to the distance from the top of the clock at point D to the hanger at point B, which is given as 2 cm.

Now, we can use the Pythagorean theorem to find the length from point A to point B

AB² = AD² + DB²

AB² = (24 cm)² + (2 cm)²

AB² = 576 cm² + 4 cm²

AB² = 580 cm²

AB ≈ 24.083 cm

Therefore, the length from point A to point B is approximately 24.083 cm, which is closest to 24 cm.

To know more about Pythagorean theorem:

https://brainly.com/question/14930619

#SPJ1

Answer:

The length from point A to point B on the clock is approximately 24.083 cm, which is closest to 24 cm. This is calculated using the Pythagorean theorem.

Hope this helps :)

Pls brainliest...

Answer:

I believe the answer would be 4 to the power of x?

Step-by-step explanation:

Sorry if I'm wrong but if the person is sending the selfie to four people and those four people and sending others four more pictures to other people then then you will continuously multiply 4.

Emmy and Liam each played 4 games according to the given statement.

An equation is a claim that two expressions are equal, typically indicated by the equals symbol (=). In mathematics, equations are used to simulate real-world scenarios, solve problems, and depict relationships between variables.

Exponents, logarithms, and trigonometric functions can all be used in equations, in addition to basic operations like addition, subtraction, multiplication, and division.

Let us suppose the number of games played = x.

Thus, for Emmy we have:

E = 1 + 2x

For Liam the equation is:

L = 5 + 1x

Equating the two equations we have:

1 + 2x = 5 + 1x

x = 4

Hence, Emmy and Liam each played 4 games according to the given statement.

Learn more about equation here:

https://brainly.com/question/10413253

#SPJ1

The value of a is a = -b/2x

Quadratic equations are the polynomial equations of degree 2 in one variable of type f(x) = ax^2 + bx + c = 0 where a, b, c, ∈ R and a ≠ 0. It is the general form of a quadratic equation where 'a' is called the leading coefficient and 'c' is called the absolute term of f (x).

Suppose we have a quadratic equation of the form:

ax²+bx+c

The axis of symmetry of the parabola is :

x = -b/ 2a

From here, we must clear the value of a.

1) Pass 2a multiplying to the other side of the equation:

2ax=-b

2) Clear the value of a by passing 2x to divide:

a = -b/2x

Learn more about Quadratic Equation at:

https://brainly.com/question/17177510

#SPJ4

For the given statement after evaluating both the options the correct option is true under the condition that scores increase and null hypothesis is used to find out Treatment effect.

Here, null hypothesis clearly states that there is no significant difference is observed in comparison of sample mean and population mean.

Null hypothesis refers to statistical process which takes certain assumptions regarding two sets of different variables. In the branch of science it is used to find credibility regarding a sample data.

For the given case, the null hypothesis presents   that the population mean remains unchanged (m = 60) post  treatment, doesn't matter if it is greater than or equal to 60. The alternative hypothesis will be increases the mean  for the treatment (m > 60).

To learn more about Null hypothesis,

https://brainly.com/question/4436370

#SPJ4

True. Your statement is: A researcher administers a treatment to a sample from a population with a mean of m = 60. If the treatment is expected to increase scores and a one-tailed test is used to evaluate the treatment effect, then the null hypothesis would state that m ≥ 60.

The null hypothesis typically represents no effect or no difference. In this case, the null hypothesis would state that the population mean remains unchanged (m = 60) after the treatment, not that it is greater than or equal to 60. The alternative hypothesis would be that the treatment increases the mean (m > 60).

To learn more about mean visit;

https://brainly.com/question/31101410

#SPJ11

For the given numbers, 78 < 0. 708

To compare two numbers, we need to look at their values and determine which one is larger or smaller. In this case, we have 78 and 0.708. We can start by comparing their whole number parts, which are 78 and 0, respectively. Since 78 is greater than 0, we know that 78 is a larger number.

But what about the decimal parts of these numbers? To compare them, we need to look at the place value of each digit. The first digit after the decimal point in 78 is 0, and the first digit after the decimal point in 0.708 is 7. Since 7 is greater than 0, we know that 0.708 is a larger number than 0.78 in terms of their decimal parts.

Now that we have compared the whole number parts and decimal parts separately, we can combine the results to determine the final comparison. Since 78 is larger than 0 and 0.708 is larger than 0.78 in terms of their decimal parts, we can conclude that:

78 < 0.708

We use the symbol "<" here because 78 is smaller than 0.708.

To know more about number here

https://brainly.com/question/17429689

#SPJ4

The volume of a triangular prism will be reduced to half of it if the height is reduced by half

A prism is a solid shape that is bound on all its sides by plane faces. The volume of a prism is generally expressed as ;

V = base area × height

If the height is cut into half, then the volume will be affected in this way.

V = bh, where b is the base area and h is the height.

When the height is cut into half i.e h/2 then the volume will be;

V = b × h/2

Since the base is constant, this means the volume will also be reduced by half.

Therefore when the height is reduced to half the volume is also reduced to half.

learn more about volume of a prism from

https://brainly.com/question/23766958

#SPJ1

It is true that a linear programming problem can have an optimal solution that is not a corner point.

In linear programming, the optimal solution represents the point where the objective function is optimized while still satisfying all the constraints.

In some cases, the optimal solution may occur at a corner point of the feasible region, where two or more of the constraints intersect.

However, it is possible for the optimal solution to occur at a point that is not a corner point, but rather lies on an edge or a line segment of the feasible region.

This can occur when the objective function is parallel to one of the constraint lines or when there are redundant constraints that limit the feasible region.

Therefore, it is true that a linear programming problem can have an optimal solution that is not a corner point.

Learn more about linear programming.

brainly.com/question/15417573

#SPJ11

There were 100 small pine cone patterns and 50 large pine cone patterns used in the camp.

When 50 students constructed one craft project each using two little pine cone patterns and one giant pine cone pattern, it is the question of how many small and large pine cone patterns were utilised overall:

We can begin by figuring out how many little pine cone patterns were utilized overall to solve this.

Since each student used 2 small pine cone patterns, we can multiply 2 by 50 (the number of students) to get:

2 x 50 = 100 small pine cone patterns used

Similarly, we can calculate the total number of large pine cone patterns used by multiplying the number of students (50) by 1 :

1 x 50 = 50 large pine cone patterns used

Therefore, in total, there were 100 small pine cone patterns and 50 large pine cone patterns used in the camp.

To know more about pine cone patterns, here

brainly.com/question/5057335

#SPJ4

--The complete Question is, If a camp has 50 students and each student made one craft project using 2 small pine cone patterns and 1 large pine cone pattern, how many small and large pine cone patterns were used in total? --

The probability of the sample mean being less than 79 is 77.64%

In order to solve the given problem we have to take the help of Standard error mean

SEM = ∑/√(n)

here,

∑ = population standard deviation

n = sample size

hence, the z-score can be calculated as

z = ( x' - μ)/σ/√(n)

here,

x' = sample mean

μ = population mean

σ = population standard deviation

n = sample size

adding the values into the formula

SEM = σ / √(n)

= 21/√64

= 2.625

z = (x' - μ)/SEM

= (79-77)/2.625

= 0.76

now, using standard distribution table we find that probability of a z-score is less than 0.77 then converting it into percentage

0.77 x 100

= 77%

The probability of the sample mean being less than 79 is 77.64%

To learn more about probability,

https://brainly.com/question/13604758

#SPJ4

Answer:

Step-by-step explanation:= x+48=180 ( linier pair )

                                            = x=180-48

                                            = x=132

                                              = x+12=180 (liner pair)

                                              = x=180-12

                                              = x=168

The surface area of the rectangular pyramid is approximately 567.9 in².

What is rectangular pyramid?

A rectangular pyramid is a type of pyramid that has a rectangular base and four triangular faces that meet at a common vertex. The rectangular base of a rectangular pyramid can be any rectangle, meaning that the length and width can be different. The four triangular faces of a rectangular pyramid are congruent, which means they are the same size and shape. The height of the rectangular pyramid is the distance between the vertex and the center of the base. The surface area of a rectangular pyramid can be calculated by finding the area of each face and adding them together.

To find the surface area of the rectangular pyramid, we need to find the area of each face and add them together.

First, let's find the area of the rectangular base:

Area of base = length x width = 13 in x 17 in = 221 in²

Next, let's find the area of the larger triangular faces:

Area of each larger triangular face = (1/2) x base x height = (1/2) x 17 in x 11 in = 93.5 in²

Total area of both larger triangular faces = 2 x 93.5 in² = 187 in²

Finally, let's find the area of the smaller triangular face:

Area of smaller triangular face = (1/2) x base x height = (1/2) x 13 in x 12.3 in = 79.95 in²

Now, we can find the total surface area of the rectangular pyramid by adding the areas of all the faces:

Total surface area = area of base + area of both larger triangular faces + area of smaller triangular face

Total surface area = 221 in² + 187 in² + 79.95 in²

Total surface area = 488.95 in²

Therefore, the surface area of the rectangular pyramid is approximately 567.9 in².

To know more about rectangular pyramid visit:

https://brainly.com/question/27270944

#SPJ1

Answer:

236 cm^2  and  8 cm

Step-by-step explanation:

width=w

240=6(5)(w)

w=8 cm

area=2[(6)(5)+(6)(8)+(5)(8)]

area=236 cm^2

Answer:1.25

Step-by-step explanation:

it just math

Maintain the 95% level of confidence but report a confidence interval with a smaller margin of error, the medical researcher should increase the sample size.

This will provide a more precise estimate of the mean birth weight of babies born to women over the age of 40.

Maintain the 95% level of confidence but report a confidence interval with a smaller margin of error, the researcher should increase the sample size.

The larger the sample size, the smaller the margin of error, which means that the estimated mean birth weight of all babies born to women over the age of 40 will be more precise.
Redoing the study and choosing a different sample of size 100 will not necessarily reduce the margin of error, as the variability in the sample may be the same.

To achieve a smaller margin of error, the researcher needs to increase the sample size.
With a larger sample size, the researcher will have a more representative sample of the population, which will lead to a more accurate estimate of the mean birth weight of all babies born to women over the age of 40.

However, the larger sample size may require more resources and time to collect the data.

For similar questions on Margin of error

https://brainly.com/question/29328438

#SPJ11

The assumption that AXB is a bounded angle is false, as a result, if AXB is a circumscribed angle of circle C, then AXB and ACB are supplementary.

To complete the proof of the Circumscribed Angle Theorem, use the fact that an inscribed angle of a circle is equal to half of the central angle that intercepts the same arc.

Since angle ∠AXB is circumscribed by the circle, point X lies on the circumference of the circle. Therefore, angles ∠CXA and ∠CXB are inscribed angles that intercept the same arc AB.

By the Inscribed Angle Theorem:

∠CXA = ½∠CAB

∠CXB = ½∠CAB

Adding these two equations:

∠CXA + ∠CXB = ½∠CAB + ½∠CAB

∠CXA + ∠CXB = ∠CAB

Now, observe that angles ∠CAB and ∠ACB form a linear pair, since they are adjacent angles that together make a straight line. Therefore, they are supplementary, which means:

∠CAB + ∠ACB = 180°

Substituting ∠CAB with ∠CXA + ∠CXB:

∠CXA + ∠CXB + ∠ACB = 180°

Finally, ∠AXB and ∠CXB form a linear pair, since they are adjacent angles that together make a straight line. Therefore, they are supplementary, which means:

∠AXB + ∠CXB = 180°

Substituting ∠CXB with ∠CAB - ∠CXA:

∠AXB + ∠CAB - ∠CXA = 180°

Adding ∠CXA to both sides:

∠AXB + ∠CAB = ∠ACB + 180°

Substituting ∠AXB + ∠CAB with 180° (since they are adjacent angles that together make a straight line):

180° = ∠ACB + 180°

Simplifying:

∠ACB = 0°

This is a contradiction, since we know that ∠ACB is a non-zero angle. Therefore, our assumption that ∠AXB is a circumscribed angle must be false. Hence, we have proved that if ∠AXB is a circumscribed angle of circle C, then ∠AXB and ∠ACB are supplementary.

Find out more on Circumscribed Angles here: https://brainly.com/question/29164079

#SPJ1